diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index e0949c8bc2d16b41cc76d807e61e71def9283306..ed37304fa09dc7b8bc8a16f4837e56eeac27a0c9 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -712,7 +712,7 @@ struct cfg80211_bitrate_mask { * MAC address based access control * @pbss: If set, start as a PCP instead of AP. Relevant for DMG * networks. - * @beacon_rate: masks for setting user configured beacon tx rate. + * @beacon_rate: bitrate to be used for beacons */ struct cfg80211_ap_settings { struct cfg80211_chan_def chandef; @@ -1365,6 +1365,7 @@ struct mesh_config { * @beacon_interval: beacon interval to use * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a] * @basic_rates: basic rates to use when creating the mesh + * @beacon_rate: bitrate to be used for beacons * * These parameters are fixed when the mesh is created. */ @@ -1385,6 +1386,7 @@ struct mesh_setup { u16 beacon_interval; int mcast_rate[NUM_NL80211_BANDS]; u32 basic_rates; + struct cfg80211_bitrate_mask beacon_rate; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 2206941514345345128a1a46819a337f4ce812ed..ec10d1b2838f8e7c97309aa0595ce0831c65a091 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1343,7 +1343,13 @@ enum nl80211_commands { * enum nl80211_band value is used as the index (nla_type() of the nested * data. If a band is not included, it will be configured to allow all * rates based on negotiated supported rates information. This attribute - * is used with %NL80211_CMD_SET_TX_BITRATE_MASK. + * is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP, + * and joining mesh networks (not IBSS yet). In the later case, it must + * specify just a single bitrate, which is to be used for the beacon. + * The driver must also specify support for this with the extended + * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, + * NL80211_EXT_FEATURE_BEACON_RATE_HT and + * NL80211_EXT_FEATURE_BEACON_RATE_VHT. * * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. @@ -4551,6 +4557,12 @@ enum nl80211_feature_flags { * (if available). * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of * channel dwell time. + * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate + * configuration (AP/mesh), supporting a legacy (non HT/VHT) rate. + * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate + * configuration (AP/mesh) with HT rates. + * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate + * configuration (AP/mesh) with VHT rates. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. @@ -4562,6 +4574,9 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_SCAN_START_TIME, NL80211_EXT_FEATURE_BSS_PARENT_TSF, NL80211_EXT_FEATURE_SET_SCAN_DWELL, + NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, + NL80211_EXT_FEATURE_BEACON_RATE_HT, + NL80211_EXT_FEATURE_BEACON_RATE_VHT, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index a10484da60c0976f64d59c4bd69cbfadf97c69bf..b8441e60b0f6aba650afd789a997f68197b98d7e 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3569,13 +3569,12 @@ static int nl80211_parse_tx_bitrate_mask(struct genl_info *info, return 0; } -static int validate_beacon_tx_rate(struct cfg80211_ap_settings *params) +static int validate_beacon_tx_rate(struct cfg80211_registered_device *rdev, + enum nl80211_band band, + struct cfg80211_bitrate_mask *beacon_rate) { - u32 rate, count_ht, count_vht, i; - enum nl80211_band band; - - band = params->chandef.chan->band; - rate = params->beacon_rate.control[band].legacy; + u32 count_ht, count_vht, i; + u32 rate = beacon_rate->control[band].legacy; /* Allow only one rate */ if (hweight32(rate) > 1) @@ -3583,9 +3582,9 @@ static int validate_beacon_tx_rate(struct cfg80211_ap_settings *params) count_ht = 0; for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++) { - if (hweight8(params->beacon_rate.control[band].ht_mcs[i]) > 1) { + if (hweight8(beacon_rate->control[band].ht_mcs[i]) > 1) { return -EINVAL; - } else if (params->beacon_rate.control[band].ht_mcs[i]) { + } else if (beacon_rate->control[band].ht_mcs[i]) { count_ht++; if (count_ht > 1) return -EINVAL; @@ -3596,9 +3595,9 @@ static int validate_beacon_tx_rate(struct cfg80211_ap_settings *params) count_vht = 0; for (i = 0; i < NL80211_VHT_NSS_MAX; i++) { - if (hweight16(params->beacon_rate.control[band].vht_mcs[i]) > 1) { + if (hweight16(beacon_rate->control[band].vht_mcs[i]) > 1) { return -EINVAL; - } else if (params->beacon_rate.control[band].vht_mcs[i]) { + } else if (beacon_rate->control[band].vht_mcs[i]) { count_vht++; if (count_vht > 1) return -EINVAL; @@ -3610,6 +3609,19 @@ static int validate_beacon_tx_rate(struct cfg80211_ap_settings *params) if ((count_ht && count_vht) || (!rate && !count_ht && !count_vht)) return -EINVAL; + if (rate && + !wiphy_ext_feature_isset(&rdev->wiphy, + NL80211_EXT_FEATURE_BEACON_RATE_LEGACY)) + return -EINVAL; + if (count_ht && + !wiphy_ext_feature_isset(&rdev->wiphy, + NL80211_EXT_FEATURE_BEACON_RATE_HT)) + return -EINVAL; + if (count_vht && + !wiphy_ext_feature_isset(&rdev->wiphy, + NL80211_EXT_FEATURE_BEACON_RATE_VHT)) + return -EINVAL; + return 0; } @@ -3847,7 +3859,8 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info) if (err) return err; - err = validate_beacon_tx_rate(¶ms); + err = validate_beacon_tx_rate(rdev, params.chandef.chan->band, + ¶ms.beacon_rate); if (err) return err; } @@ -9406,6 +9419,17 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info) return err; } + if (info->attrs[NL80211_ATTR_TX_RATES]) { + err = nl80211_parse_tx_bitrate_mask(info, &setup.beacon_rate); + if (err) + return err; + + err = validate_beacon_tx_rate(rdev, setup.chandef.chan->band, + &setup.beacon_rate); + if (err) + return err; + } + return cfg80211_join_mesh(rdev, dev, &setup, &cfg); }