From 82cd3d11f359763da445a7636ee683a922aaf025 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Thu, 20 Dec 2007 20:09:00 -0800 Subject: [PATCH] [TG3]: Correct 5704S flowctrl advertisements This patch modifies the 5704S hardware autoneg code to use the administrator specified flow control parameters. Since the 5704S uses device specific flow control enumerations, the 1000-BaseX utility functions are used and code was added to convert the definitions to and from the proprietary enumerations. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 6575e9bc170f..3caead4c2702 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1695,7 +1695,7 @@ static void tg3_setup_flow_control(struct tg3 *tp, u32 local_adv, u32 remote_adv u32 old_tx_mode = tp->tx_mode; if (tp->tg3_flags & TG3_FLAG_PAUSE_AUTONEG) { - if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) + if (tp->tg3_flags2 & (TG3_FLG2_MII_SERDES|TG3_FLG2_HW_AUTONEG)) new_tg3_flags = tg3_resolve_flowctrl_1000X(local_adv, remote_adv); else @@ -2658,6 +2658,7 @@ static void tg3_init_bcm8002(struct tg3 *tp) static int tg3_setup_fiber_hw_autoneg(struct tg3 *tp, u32 mac_status) { + u16 flowctrl; u32 sg_dig_ctrl, sg_dig_status; u32 serdes_cfg, expected_sg_dig_ctrl; int workaround, port_a; @@ -2706,11 +2707,11 @@ static int tg3_setup_fiber_hw_autoneg(struct tg3 *tp, u32 mac_status) /* Want auto-negotiation. */ expected_sg_dig_ctrl = SG_DIG_USING_HW_AUTONEG | SG_DIG_COMMON_SETUP; - /* Pause capability */ - expected_sg_dig_ctrl |= SG_DIG_PAUSE_CAP; - - /* Asymettric pause */ - expected_sg_dig_ctrl |= SG_DIG_ASYM_PAUSE; + flowctrl = tg3_advert_flowctrl_1000X(tp->link_config.flowctrl); + if (flowctrl & ADVERTISE_1000XPAUSE) + expected_sg_dig_ctrl |= SG_DIG_PAUSE_CAP; + if (flowctrl & ADVERTISE_1000XPSE_ASYM) + expected_sg_dig_ctrl |= SG_DIG_ASYM_PAUSE; if (sg_dig_ctrl != expected_sg_dig_ctrl) { if ((tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT) && @@ -2738,14 +2739,17 @@ static int tg3_setup_fiber_hw_autoneg(struct tg3 *tp, u32 mac_status) if ((sg_dig_status & SG_DIG_AUTONEG_COMPLETE) && (mac_status & MAC_STATUS_PCS_SYNCED)) { - u32 local_adv, remote_adv; + u32 local_adv = 0, remote_adv = 0; + + if (sg_dig_ctrl & SG_DIG_PAUSE_CAP) + local_adv |= ADVERTISE_1000XPAUSE; + if (sg_dig_ctrl & SG_DIG_ASYM_PAUSE) + local_adv |= ADVERTISE_1000XPSE_ASYM; - local_adv = ADVERTISE_PAUSE_CAP; - remote_adv = 0; if (sg_dig_status & SG_DIG_PARTNER_PAUSE_CAPABLE) - remote_adv |= LPA_PAUSE_CAP; + remote_adv |= LPA_1000XPAUSE; if (sg_dig_status & SG_DIG_PARTNER_ASYM_PAUSE) - remote_adv |= LPA_PAUSE_ASYM; + remote_adv |= LPA_1000XPAUSE_ASYM; tg3_setup_flow_control(tp, local_adv, remote_adv); current_link_up = 1; -- GitLab