diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
index 240772ad5d696fac0106c46e5aaf5cffed6c98de..aef39909e4a2ea216e5b3fc2674df2f849b95b5f 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c
@@ -2264,36 +2264,19 @@ static int fm10k_handle_resume(struct fm10k_intfc *interface)
 
 #ifdef CONFIG_PM
 /**
- * fm10k_resume - Restore device to pre-sleep state
- * @pdev: PCI device information struct
+ * fm10k_resume - Generic PM resume hook
+ * @dev: generic device structure
  *
- * fm10k_resume is called after the system has powered back up from a sleep
- * state and is ready to resume operation.  This function is meant to restore
- * the device back to its pre-sleep state.
+ * Generic PM hook used when waking the device from a low power state after
+ * suspend or hibernation. This function does not need to handle lower PCIe
+ * device state as the stack takes care of that for us.
  **/
-static int fm10k_resume(struct pci_dev *pdev)
+static int fm10k_resume(struct device *dev)
 {
-	struct fm10k_intfc *interface = pci_get_drvdata(pdev);
+	struct fm10k_intfc *interface = pci_get_drvdata(to_pci_dev(dev));
 	struct net_device *netdev = interface->netdev;
 	struct fm10k_hw *hw = &interface->hw;
-	u32 err;
-
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-
-	/* pci_restore_state clears dev->state_saved so call
-	 * pci_save_state to restore it.
-	 */
-	pci_save_state(pdev);
-
-	err = pci_enable_device_mem(pdev);
-	if (err) {
-		dev_err(&pdev->dev, "Cannot enable PCI device from suspend\n");
-		return err;
-	}
-	pci_set_master(pdev);
-
-	pci_wake_from_d3(pdev, false);
+	int err;
 
 	/* refresh hw_addr in case it was dropped */
 	hw->hw_addr = interface->uc_addr;
@@ -2308,36 +2291,27 @@ static int fm10k_resume(struct pci_dev *pdev)
 }
 
 /**
- * fm10k_suspend - Prepare the device for a system sleep state
- * @pdev: PCI device information struct
+ * fm10k_suspend - Generic PM suspend hook
+ * @dev: generic device structure
  *
- * fm10k_suspend is meant to shutdown the device prior to the system entering
- * a sleep state.  The fm10k hardware does not support wake on lan so the
- * driver simply needs to shut down the device so it is in a low power state.
+ * Generic PM hook used when setting the device into a low power state for
+ * system suspend or hibernation. This function does not need to handle lower
+ * PCIe device state as the stack takes care of that for us.
  **/
-static int fm10k_suspend(struct pci_dev *pdev,
-			 pm_message_t __always_unused state)
+static int fm10k_suspend(struct device *dev)
 {
-	struct fm10k_intfc *interface = pci_get_drvdata(pdev);
+	struct fm10k_intfc *interface = pci_get_drvdata(to_pci_dev(dev));
 	struct net_device *netdev = interface->netdev;
-	int err = 0;
 
 	netif_device_detach(netdev);
 
 	fm10k_prepare_suspend(interface);
 
-	err = pci_save_state(pdev);
-	if (err)
-		return err;
-
-	pci_disable_device(pdev);
-	pci_wake_from_d3(pdev, false);
-	pci_set_power_state(pdev, PCI_D3hot);
-
 	return 0;
 }
 
 #endif /* CONFIG_PM */
+
 /**
  * fm10k_io_error_detected - called when PCI error is detected
  * @pdev: Pointer to PCI device
@@ -2447,15 +2421,18 @@ static const struct pci_error_handlers fm10k_err_handler = {
 	.reset_done = fm10k_io_reset_done,
 };
 
+static SIMPLE_DEV_PM_OPS(fm10k_pm_ops, fm10k_suspend, fm10k_resume);
+
 static struct pci_driver fm10k_driver = {
 	.name			= fm10k_driver_name,
 	.id_table		= fm10k_pci_tbl,
 	.probe			= fm10k_probe,
 	.remove			= fm10k_remove,
 #ifdef CONFIG_PM
-	.suspend		= fm10k_suspend,
-	.resume			= fm10k_resume,
-#endif
+	.driver = {
+		.pm		= &fm10k_pm_ops,
+	},
+#endif /* CONFIG_PM */
 	.sriov_configure	= fm10k_iov_configure,
 	.err_handler		= &fm10k_err_handler
 };