ARM: OMAP: Fix DMA channel irq handling for omap24xx

- DMA CSR register is cleared by reading on omap1, but on
  omap2 it is cleard by writing to it.

- DMA TOUT interrupt does not exist on omap24xx, rename it

- Add SECURE and MISALIGNED errors by default for omap24xx

- Add defines for external DMA request lines
Signed-off-by: NTony Lindgren <tony@atomide.com>

arch/arm/plat-omap/dma.c

@@ -43,6 +43,7 @@
 
 #define OMAP_DMA_ACTIVE		0x01
 #define OMAP_DMA_CCR_EN		(1 << 7)
+#define OMAP2_DMA_CSR_CLEAR_MASK	0xffe
 
 #define OMAP_FUNC_MUX_ARM_BASE	(0xfffe1000 + 0xec)
 
@@ -409,8 +410,11 @@ static inline void omap_enable_channel_irq(int lch)
 {
 	u32 status;
 
-	/* Read CSR to make sure it's cleared. */
+	/* Clear CSR */
+	if (cpu_class_is_omap1())
 		status = OMAP_DMA_CSR_REG(lch);
+	else if (cpu_is_omap24xx())
+		OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
 
 	/* Enable some nice interrupts. */
 	OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
@@ -509,11 +513,13 @@ int omap_request_dma(int dev_id, const char *dev_name,
 	chan->dev_name = dev_name;
 	chan->callback = callback;
 	chan->data = data;
-	chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ |
-				OMAP_DMA_BLOCK_IRQ;
+	chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
 
-	if (cpu_is_omap24xx())
-		chan->enabled_irqs |= OMAP2_DMA_TRANS_ERR_IRQ;
+	if (cpu_class_is_omap1())
+		chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
+	else if (cpu_is_omap24xx())
+		chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
+			OMAP2_DMA_TRANS_ERR_IRQ;
 
 	if (cpu_is_omap16xx()) {
 		/* If the sync device is set, configure it dynamically. */
@@ -533,7 +539,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
 
 		omap_enable_channel_irq(free_ch);
 		/* Clear the CSR register and IRQ status register */
-		OMAP_DMA_CSR_REG(free_ch) = 0x0;
+		OMAP_DMA_CSR_REG(free_ch) = OMAP2_DMA_CSR_CLEAR_MASK;
 		omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0);
 	}
 
@@ -573,7 +579,7 @@ void omap_free_dma(int lch)
 		omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
 
 		/* Clear the CSR register and IRQ status register */
-		OMAP_DMA_CSR_REG(lch) = 0x0;
+		OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
 
 		val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
 		val |= 1 << lch;
@@ -837,7 +843,7 @@ static int omap1_dma_handle_ch(int ch)
 		       "%d (CSR %04x)\n", ch, csr);
 		return 0;
 	}
-	if (unlikely(csr & OMAP_DMA_TOUT_IRQ))
+	if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
 		printk(KERN_WARNING "DMA timeout with device %d\n",
 		       dma_chan[ch].dev_id);
 	if (unlikely(csr & OMAP_DMA_DROP_IRQ))
@@ -885,20 +891,21 @@ static int omap2_dma_handle_ch(int ch)
 		return 0;
 	if (unlikely(dma_chan[ch].dev_id == -1))
 		return 0;
-	/* REVISIT: According to 24xx TRM, there's no TOUT_IE */
-	if (unlikely(status & OMAP_DMA_TOUT_IRQ))
-		printk(KERN_INFO "DMA timeout with device %d\n",
-		       dma_chan[ch].dev_id);
 	if (unlikely(status & OMAP_DMA_DROP_IRQ))
 		printk(KERN_INFO
 		       "DMA synchronization event drop occurred with device "
 		       "%d\n", dma_chan[ch].dev_id);
-
 	if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ))
 		printk(KERN_INFO "DMA transaction error with device %d\n",
 		       dma_chan[ch].dev_id);
+	if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
+		printk(KERN_INFO "DMA secure error with device %d\n",
+		       dma_chan[ch].dev_id);
+	if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
+		printk(KERN_INFO "DMA misaligned error with device %d\n",
+		       dma_chan[ch].dev_id);
 
-	OMAP_DMA_CSR_REG(ch) = 0x20;
+	OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK;
 
 	val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
 	/* ch in this function is from 0-31 while in register it is 1-32 */

drivers/mmc/omap.c

@@ -663,7 +663,7 @@ static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data)
 		return;
 	}
 	/* FIXME: We really should do something to _handle_ the errors */
-	if (ch_status & OMAP_DMA_TOUT_IRQ) {
+	if (ch_status & OMAP1_DMA_TOUT_IRQ) {
 		dev_err(mmc_dev(host->mmc),"DMA timeout\n");
 		return;
 	}

drivers/usb/gadget/omap_udc.c

@@ -773,7 +773,7 @@ static void dma_error(int lch, u16 ch_status, void *data)
 	struct omap_ep	*ep = data;
 
 	/* if ch_status & OMAP_DMA_DROP_IRQ ... */
-	/* if ch_status & OMAP_DMA_TOUT_IRQ ... */
+	/* if ch_status & OMAP1_DMA_TOUT_IRQ ... */
 	ERR("%s dma error, lch %d status %02x\n", ep->ep.name, lch, ch_status);
 
 	/* complete current transfer ... */

include/asm-arm/arch-omap/dma.h

@@ -185,8 +185,8 @@
 /* DMA channels for 24xx */
 #define OMAP24XX_DMA_NO_DEVICE		0
 #define OMAP24XX_DMA_XTI_DMA		1	/* S_DMA_0 */
-#define OMAP24XX_DMA_EXT_NDMA_REQ0	2	/* S_DMA_1 */
-#define OMAP24XX_DMA_EXT_NDMA_REQ1	3	/* S_DMA_2 */
+#define OMAP24XX_DMA_EXT_DMAREQ0	2	/* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1	3	/* S_DMA_2 */
 #define OMAP24XX_DMA_GPMC		4	/* S_DMA_3 */
 #define OMAP24XX_DMA_GFX		5	/* S_DMA_4 */
 #define OMAP24XX_DMA_DSS		6	/* S_DMA_5 */
@@ -197,7 +197,9 @@
 #define OMAP24XX_DMA_DES_TX		11	/* S_DMA_10 */
 #define OMAP24XX_DMA_DES_RX		12	/* S_DMA_11 */
 #define OMAP24XX_DMA_SHA1MD5_RX		13	/* S_DMA_12 */
-
+#define OMAP24XX_DMA_EXT_DMAREQ2	14	/* S_DMA_13 */
+#define OMAP24XX_DMA_EXT_DMAREQ3	15	/* S_DMA_14 */
+#define OMAP24XX_DMA_EXT_DMAREQ4	16	/* S_DMA_15 */
 #define OMAP24XX_DMA_EAC_AC_RD		17	/* S_DMA_16 */
 #define OMAP24XX_DMA_EAC_AC_WR		18	/* S_DMA_17 */
 #define OMAP24XX_DMA_EAC_MD_UL_RD	19	/* S_DMA_18 */
@@ -244,6 +246,7 @@
 #define OMAP24XX_DMA_MMC1_TX		61	/* SDMA_60 */
 #define OMAP24XX_DMA_MMC1_RX		62	/* SDMA_61 */
 #define OMAP24XX_DMA_MS			63	/* SDMA_62 */
+#define OMAP24XX_DMA_EXT_DMAREQ5	64	/* S_DMA_63 */
 
 /*----------------------------------------------------------------------------*/
 
@@ -274,7 +277,7 @@
 #define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
 #define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
 
-#define OMAP_DMA_TOUT_IRQ		(1 << 0)	/* Only on omap1 */
+#define OMAP1_DMA_TOUT_IRQ		(1 << 0)
 #define OMAP_DMA_DROP_IRQ		(1 << 1)
 #define OMAP_DMA_HALF_IRQ		(1 << 2)
 #define OMAP_DMA_FRAME_IRQ		(1 << 3)