diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 05a082164c10878ea1b17ed93465855d75d85ed7..8a1032c1ffc9fd3bc129554d850f9d941585d390 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -31,7 +31,7 @@
 	};
 
 	syscon: syscon@c0011000 {
-		compatible = "stericsson,u300-syscon";
+		compatible = "stericsson,u300-syscon", "syscon";
 		reg = <0xc0011000 0x1000>;
 		clk32: app_32_clk@32k {
 			#clock-cells = <0>;
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index e2f350f2c32bf1c26fc3a92a0d1827be14d8da56..09f4dda01d5ff3a6188cca8346255698b86c02b6 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -20,6 +20,7 @@ config ARCH_U300
 	select PINCTRL_COH901
 	select PINCTRL_U300
 	select SPARSE_IRQ
+	select MFD_SYSCON
 	select USE_OF
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
index 273fceb83685525d85ae3cdc9ec07a210f0e6b68..bf40cd478fe95d82d64073bb1ff184c07f25808f 100644
--- a/arch/arm/mach-u300/regulator.c
+++ b/arch/arm/mach-u300/regulator.c
@@ -15,9 +15,8 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/consumer.h>
-/* Those are just for writing in syscon */
-#include <linux/of_address.h>
-#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 /* Power Management Control 16bit (R/W) */
 #define U300_SYSCON_PMCR					(0x50)
@@ -59,9 +58,8 @@ static int __init __u300_init_boardpower(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct device_node *syscon_np;
-	static void __iomem *syscon_base;
+	struct regmap *regmap;
 	int err;
-	u32 val;
 
 	pr_info("U300: setting up board power\n");
 
@@ -70,9 +68,9 @@ static int __init __u300_init_boardpower(struct platform_device *pdev)
 		pr_crit("U300: no syscon node\n");
 		return -ENODEV;
 	}
-	syscon_base = of_iomap(syscon_np, 0);
-	if (!syscon_base) {
-		pr_crit("U300: could not remap syscon\n");
+	regmap = syscon_node_to_regmap(syscon_np);
+	if (!regmap) {
+		pr_crit("U300: could not locate syscon regmap\n");
 		return -ENODEV;
 	}
 
@@ -96,9 +94,8 @@ static int __init __u300_init_boardpower(struct platform_device *pdev)
 	 * the rest of the U300 power management is implemented.
 	 */
 	pr_info("U300: disable system controller pull-up\n");
-	val = readw(syscon_base + U300_SYSCON_PMCR);
-	val &= ~U300_SYSCON_PMCR_DCON_ENABLE;
-	writew(val, syscon_base + U300_SYSCON_PMCR);
+	regmap_update_bits(regmap, U300_SYSCON_PMCR,
+			   U300_SYSCON_PMCR_DCON_ENABLE, 0);
 
 	/* Register globally exported PM poweroff hook */
 	pm_power_off = u300_pm_poweroff;