diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt index 3af4d29a893886d648e71aa732b0ee9bec82a440..89aa89d526ac452c16dec148bd9675175f476f56 100644 --- a/Documentation/arm/Samsung-S3C24XX/Overview.txt +++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt @@ -81,7 +81,8 @@ Adding New Machines Any large scale modifications, or new drivers should be discussed on the ARM kernel mailing list (linux-arm-kernel) before being - attempted. + attempted. See http://www.arm.linux.org.uk/mailinglists/ for the + mailing list information. NAND @@ -120,6 +121,43 @@ Clock Management various clock units +Platform Data +------------- + + Whenever a device has platform specific data that is specified + on a per-machine basis, care should be taken to ensure the + following: + + 1) that default data is not left in the device to confuse the + driver if a machine does not set it at startup + + 2) the data should (if possible) be marked as __initdata, + to ensure that the data is thrown away if the machine is + not the one currently in use. + + The best way of doing this is to make a function that + kmalloc()s an area of memory, and copies the __initdata + and then sets the relevant device's platform data. Making + the function `__init` takes care of ensuring it is discarded + with the rest of the initialisation code + + static __init void s3c24xx_xxx_set_platdata(struct xxx_data *pd) + { + struct s3c2410_xxx_mach_info *npd; + + npd = kmalloc(sizeof(struct s3c2410_xxx_mach_info), GFP_KERNEL); + if (npd) { + memcpy(npd, pd, sizeof(struct s3c2410_xxx_mach_info)); + s3c_device_xxx.dev.platform_data = npd; + } else { + printk(KERN_ERR "no memory for xxx platform data\n"); + } + } + + Note, since the code is marked as __init, it should not be + exported outside arch/arm/mach-s3c2410/, or exported to + modules via EXPORT_SYMBOL() and related functions. + Port Contributors ----------------- @@ -149,6 +187,7 @@ Document Changes 06 Mar 2005 - BJD - Added Christer Weinigel 08 Mar 2005 - BJD - Added LCVR to list of people, updated introduction 08 Mar 2005 - BJD - Added section on adding machines + 09 Sep 2005 - BJD - Added section on platform data Document Author --------------- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 682367bd0f653d63a19b7120959e18cc3d1da383..dc6d8342e5e66f1c9ba7e707a066feaa8e7968ce 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -194,6 +194,13 @@ config ARCH_VERSATILE help This enables support for ARM Ltd Versatile board. +config ARCH_REALVIEW + bool "RealView" + select ARM_AMBA + select ICST307 + help + This enables support for ARM Ltd RealView boards. + config ARCH_IMX bool "IMX" @@ -244,6 +251,8 @@ source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-aaec2000/Kconfig" +source "arch/arm/mach-realview/Kconfig" + # Definitions to make life easier config ARCH_ACORN bool diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 64cf480b0b0259ef0cd569baa5de34a5fac00f03..d80749ae2a7e545d97b7399260adf713f10c5d62 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -99,6 +99,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000 machine-$(CONFIG_ARCH_IMX) := imx machine-$(CONFIG_ARCH_H720X) := h720x machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 + machine-$(CONFIG_ARCH_REALVIEW) := realview ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index c279e41ed10e72acb94b6fdf3bd587b9b0de375a..f74c926beb428dc0434f74f136f8cb415e7bc76d 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -104,7 +104,7 @@ CONFIG_ARCH_IXCDP1100=y CONFIG_ARCH_PRPMC1100=y CONFIG_ARCH_IXDP4XX=y CONFIG_CPU_IXP46X=y -CONFIG_MACH_GTWX5715=y +# CONFIG_MACH_GTWX5715 is not set # # IXP4xx Options diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 71e5b99e519ea07c0969ea8ae38e57e8b6f0bf9e..391f3ab3ff32978ec9b8af262ad50b85ff71b464 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -7,13 +7,27 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ csumpartialcopy.o csumpartialcopyuser.o clearbit.o \ copy_page.o delay.o findbit.o memchr.o memcpy.o \ - memset.o memzero.o setbit.o strncpy_from_user.o \ - strnlen_user.o strchr.o strrchr.o testchangebit.o \ - testclearbit.o testsetbit.o uaccess.o getuser.o \ - putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ + memmove.o memset.o memzero.o setbit.o \ + strncpy_from_user.o strnlen_user.o \ + strchr.o strrchr.o \ + testchangebit.o testclearbit.o testsetbit.o \ + getuser.o putuser.o clear_user.o \ + ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ ucmpdi2.o lib1funcs.o div64.o sha1.o \ io-readsb.o io-writesb.o io-readsl.o io-writesl.o +# the code in uaccess.S is not preemption safe and +# probably faster on ARMv3 only +ifeq ($CONFIG_PREEMPT,y) + lib-y += copy_from_user.o copy_to_user.o +else +ifneq ($(CONFIG_CPU_32v3),y) + lib-y += copy_from_user.o copy_to_user.o +else + lib-y += uaccess.o +endif +endif + ifeq ($(CONFIG_CPU_32v3),y) lib-y += io-readsw-armv3.o io-writesw-armv3.o else diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S new file mode 100644 index 0000000000000000000000000000000000000000..7ff9f831b3f9375744517bfe198058cf9f102663 --- /dev/null +++ b/arch/arm/lib/clear_user.S @@ -0,0 +1,52 @@ +/* + * linux/arch/arm/lib/clear_user.S + * + * Copyright (C) 1995, 1996,1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + + .text + +/* Prototype: int __arch_clear_user(void *addr, size_t sz) + * Purpose : clear some user memory + * Params : addr - user memory address to clear + * : sz - number of bytes to clear + * Returns : number of bytes NOT cleared + */ +ENTRY(__arch_clear_user) + stmfd sp!, {r1, lr} + mov r2, #0 + cmp r1, #4 + blt 2f + ands ip, r0, #3 + beq 1f + cmp ip, #2 +USER( strbt r2, [r0], #1) +USER( strlebt r2, [r0], #1) +USER( strltbt r2, [r0], #1) + rsb ip, ip, #4 + sub r1, r1, ip @ 7 6 5 4 3 2 1 +1: subs r1, r1, #8 @ -1 -2 -3 -4 -5 -6 -7 +USER( strplt r2, [r0], #4) +USER( strplt r2, [r0], #4) + bpl 1b + adds r1, r1, #4 @ 3 2 1 0 -1 -2 -3 +USER( strplt r2, [r0], #4) +2: tst r1, #2 @ 1x 1x 0x 0x 1x 1x 0x +USER( strnebt r2, [r0], #1) +USER( strnebt r2, [r0], #1) + tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1 +USER( strnebt r2, [r0], #1) + mov r0, #0 + LOADREGS(fd,sp!, {r1, pc}) + + .section .fixup,"ax" + .align 0 +9001: LOADREGS(fd,sp!, {r0, pc}) + .previous + diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S new file mode 100644 index 0000000000000000000000000000000000000000..7497393a0e814d588a07c3f4bcd9fe4d65b3a62f --- /dev/null +++ b/arch/arm/lib/copy_from_user.S @@ -0,0 +1,101 @@ +/* + * linux/arch/arm/lib/copy_from_user.S + * + * Author: Nicolas Pitre + * Created: Sep 29, 2005 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +/* + * Prototype: + * + * size_t __arch_copy_from_user(void *to, const void *from, size_t n) + * + * Purpose: + * + * copy a block to kernel memory from user memory + * + * Params: + * + * to = kernel memory + * from = user memory + * n = number of bytes to copy + * + * Return value: + * + * Number of bytes NOT copied. + */ + + .macro ldr1w ptr reg abort +100: ldrt \reg, [\ptr], #4 + .section __ex_table, "a" + .long 100b, \abort + .previous + .endm + + .macro ldr4w ptr reg1 reg2 reg3 reg4 abort + ldr1w \ptr, \reg1, \abort + ldr1w \ptr, \reg2, \abort + ldr1w \ptr, \reg3, \abort + ldr1w \ptr, \reg4, \abort + .endm + + .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + ldr4w \ptr, \reg1, \reg2, \reg3, \reg4, \abort + ldr4w \ptr, \reg5, \reg6, \reg7, \reg8, \abort + .endm + + .macro ldr1b ptr reg cond=al abort +100: ldr\cond\()bt \reg, [\ptr], #1 + .section __ex_table, "a" + .long 100b, \abort + .previous + .endm + + .macro str1w ptr reg abort + str \reg, [\ptr], #4 + .endm + + .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8} + .endm + + .macro str1b ptr reg cond=al abort + str\cond\()b \reg, [\ptr], #1 + .endm + + .macro enter reg1 reg2 + mov r3, #0 + stmdb sp!, {r0, r2, r3, \reg1, \reg2} + .endm + + .macro exit reg1 reg2 + add sp, sp, #8 + ldmfd sp!, {r0, \reg1, \reg2} + .endm + + .text + +ENTRY(__arch_copy_from_user) + +#include "copy_template.S" + + .section .fixup,"ax" + .align 0 + copy_abort_preamble + ldmfd sp!, {r1, r2} + sub r3, r0, r1 + rsb r1, r3, r2 + str r1, [sp] + bl __memzero + ldr r0, [sp], #4 + copy_abort_end + .previous + diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S new file mode 100644 index 0000000000000000000000000000000000000000..838e435e49223558aad338940ddd2809070c7249 --- /dev/null +++ b/arch/arm/lib/copy_template.S @@ -0,0 +1,255 @@ +/* + * linux/arch/arm/lib/copy_template.s + * + * Code template for optimized memory copy functions + * + * Author: Nicolas Pitre + * Created: Sep 28, 2005 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * This can be used to enable code to cacheline align the source pointer. + * Experiments on tested architectures (StrongARM and XScale) didn't show + * this a worthwhile thing to do. That might be different in the future. + */ +//#define CALGN(code...) code +#define CALGN(code...) + +/* + * Theory of operation + * ------------------- + * + * This file provides the core code for a forward memory copy used in + * the implementation of memcopy(), copy_to_user() and copy_from_user(). + * + * The including file must define the following accessor macros + * according to the need of the given function: + * + * ldr1w ptr reg abort + * + * This loads one word from 'ptr', stores it in 'reg' and increments + * 'ptr' to the next word. The 'abort' argument is used for fixup tables. + * + * ldr4w ptr reg1 reg2 reg3 reg4 abort + * ldr8w ptr, reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + * + * This loads four or eight words starting from 'ptr', stores them + * in provided registers and increments 'ptr' past those words. + * The'abort' argument is used for fixup tables. + * + * ldr1b ptr reg cond abort + * + * Similar to ldr1w, but it loads a byte and increments 'ptr' one byte. + * It also must apply the condition code if provided, otherwise the + * "al" condition is assumed by default. + * + * str1w ptr reg abort + * str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + * str1b ptr reg cond abort + * + * Same as their ldr* counterparts, but data is stored to 'ptr' location + * rather than being loaded. + * + * enter reg1 reg2 + * + * Preserve the provided registers on the stack plus any additional + * data as needed by the implementation including this code. Called + * upon code entry. + * + * exit reg1 reg2 + * + * Restore registers with the values previously saved with the + * 'preserv' macro. Called upon code termination. + */ + + + enter r4, lr + + subs r2, r2, #4 + blt 8f + ands ip, r0, #3 + PLD( pld [r1, #0] ) + bne 9f + ands ip, r1, #3 + bne 10f + +1: subs r2, r2, #(28) + stmfd sp!, {r5 - r8} + blt 5f + + CALGN( ands ip, r1, #31 ) + CALGN( rsb r3, ip, #32 ) + CALGN( sbcnes r4, r3, r2 ) @ C is always set here + CALGN( bcs 2f ) + CALGN( adr r4, 6f ) + CALGN( subs r2, r2, r3 ) @ C gets set + CALGN( add pc, r4, ip ) + + PLD( pld [r1, #0] ) +2: PLD( subs r2, r2, #96 ) + PLD( pld [r1, #28] ) + PLD( blt 4f ) + PLD( pld [r1, #60] ) + PLD( pld [r1, #92] ) + +3: PLD( pld [r1, #124] ) +4: ldr8w r1, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f + subs r2, r2, #32 + str8w r0, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f + bge 3b + PLD( cmn r2, #96 ) + PLD( bge 4b ) + +5: ands ip, r2, #28 + rsb ip, ip, #32 + addne pc, pc, ip @ C is always clear here + b 7f +6: nop + ldr1w r1, r3, abort=20f + ldr1w r1, r4, abort=20f + ldr1w r1, r5, abort=20f + ldr1w r1, r6, abort=20f + ldr1w r1, r7, abort=20f + ldr1w r1, r8, abort=20f + ldr1w r1, lr, abort=20f + + add pc, pc, ip + nop + nop + str1w r0, r3, abort=20f + str1w r0, r4, abort=20f + str1w r0, r5, abort=20f + str1w r0, r6, abort=20f + str1w r0, r7, abort=20f + str1w r0, r8, abort=20f + str1w r0, lr, abort=20f + + CALGN( bcs 2b ) + +7: ldmfd sp!, {r5 - r8} + +8: movs r2, r2, lsl #31 + ldr1b r1, r3, ne, abort=21f + ldr1b r1, r4, cs, abort=21f + ldr1b r1, ip, cs, abort=21f + str1b r0, r3, ne, abort=21f + str1b r0, r4, cs, abort=21f + str1b r0, ip, cs, abort=21f + + exit r4, pc + +9: rsb ip, ip, #4 + cmp ip, #2 + ldr1b r1, r3, gt, abort=21f + ldr1b r1, r4, ge, abort=21f + ldr1b r1, lr, abort=21f + str1b r0, r3, gt, abort=21f + str1b r0, r4, ge, abort=21f + subs r2, r2, ip + str1b r0, lr, abort=21f + blt 8b + ands ip, r1, #3 + beq 1b + +10: bic r1, r1, #3 + cmp ip, #2 + ldr1w r1, lr, abort=21f + beq 17f + bgt 18f + + + .macro forward_copy_shift pull push + + subs r2, r2, #28 + blt 14f + + CALGN( ands ip, r1, #31 ) + CALGN( rsb ip, ip, #32 ) + CALGN( sbcnes r4, ip, r2 ) @ C is always set here + CALGN( subcc r2, r2, ip ) + CALGN( bcc 15f ) + +11: stmfd sp!, {r5 - r9} + + PLD( pld [r1, #0] ) + PLD( subs r2, r2, #96 ) + PLD( pld [r1, #28] ) + PLD( blt 13f ) + PLD( pld [r1, #60] ) + PLD( pld [r1, #92] ) + +12: PLD( pld [r1, #124] ) +13: ldr4w r1, r4, r5, r6, r7, abort=19f + mov r3, lr, pull #\pull + subs r2, r2, #32 + ldr4w r1, r8, r9, ip, lr, abort=19f + orr r3, r3, r4, push #\push + mov r4, r4, pull #\pull + orr r4, r4, r5, push #\push + mov r5, r5, pull #\pull + orr r5, r5, r6, push #\push + mov r6, r6, pull #\pull + orr r6, r6, r7, push #\push + mov r7, r7, pull #\pull + orr r7, r7, r8, push #\push + mov r8, r8, pull #\pull + orr r8, r8, r9, push #\push + mov r9, r9, pull #\pull + orr r9, r9, ip, push #\push + mov ip, ip, pull #\pull + orr ip, ip, lr, push #\push + str8w r0, r3, r4, r5, r6, r7, r8, r9, ip, , abort=19f + bge 12b + PLD( cmn r2, #96 ) + PLD( bge 13b ) + + ldmfd sp!, {r5 - r9} + +14: ands ip, r2, #28 + beq 16f + +15: mov r3, lr, pull #\pull + ldr1w r1, lr, abort=21f + subs ip, ip, #4 + orr r3, r3, lr, push #\push + str1w r0, r3, abort=21f + bgt 15b + CALGN( cmp r2, #0 ) + CALGN( bge 11b ) + +16: sub r1, r1, #(\push / 8) + b 8b + + .endm + + + forward_copy_shift pull=8 push=24 + +17: forward_copy_shift pull=16 push=16 + +18: forward_copy_shift pull=24 push=8 + + +/* + * Abort preanble and completion macros. + * If a fixup handler is required then those macros must surround it. + * It is assumed that the fixup code will handle the private part of + * the exit macro. + */ + + .macro copy_abort_preamble +19: ldmfd sp!, {r5 - r9} + b 21f +20: ldmfd sp!, {r5 - r8} +21: + .endm + + .macro copy_abort_end + ldmfd sp!, {r4, pc} + .endm + diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S new file mode 100644 index 0000000000000000000000000000000000000000..4a6d8ea14022329444eb03535f0dd12058ccf89d --- /dev/null +++ b/arch/arm/lib/copy_to_user.S @@ -0,0 +1,101 @@ +/* + * linux/arch/arm/lib/copy_to_user.S + * + * Author: Nicolas Pitre + * Created: Sep 29, 2005 + * Copyright: MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +/* + * Prototype: + * + * size_t __arch_copy_to_user(void *to, const void *from, size_t n) + * + * Purpose: + * + * copy a block to user memory from kernel memory + * + * Params: + * + * to = user memory + * from = kernel memory + * n = number of bytes to copy + * + * Return value: + * + * Number of bytes NOT copied. + */ + + .macro ldr1w ptr reg abort + ldr \reg, [\ptr], #4 + .endm + + .macro ldr4w ptr reg1 reg2 reg3 reg4 abort + ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4} + .endm + + .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8} + .endm + + .macro ldr1b ptr reg cond=al abort + ldr\cond\()b \reg, [\ptr], #1 + .endm + + .macro str1w ptr reg abort +100: strt \reg, [\ptr], #4 + .section __ex_table, "a" + .long 100b, \abort + .previous + .endm + + .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + str1w \ptr, \reg1, \abort + str1w \ptr, \reg2, \abort + str1w \ptr, \reg3, \abort + str1w \ptr, \reg4, \abort + str1w \ptr, \reg5, \abort + str1w \ptr, \reg6, \abort + str1w \ptr, \reg7, \abort + str1w \ptr, \reg8, \abort + .endm + + .macro str1b ptr reg cond=al abort +100: str\cond\()bt \reg, [\ptr], #1 + .section __ex_table, "a" + .long 100b, \abort + .previous + .endm + + .macro enter reg1 reg2 + mov r3, #0 + stmdb sp!, {r0, r2, r3, \reg1, \reg2} + .endm + + .macro exit reg1 reg2 + add sp, sp, #8 + ldmfd sp!, {r0, \reg1, \reg2} + .endm + + .text + +ENTRY(__arch_copy_to_user) + +#include "copy_template.S" + + .section .fixup,"ax" + .align 0 + copy_abort_preamble + ldmfd sp!, {r1, r2, r3} + sub r0, r0, r1 + rsb r0, r0, r2 + copy_abort_end + .previous + diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S index f5a593ceb8cc1e2637271d8ec52b8aacaa765ad0..7e71d6708a8d668142fba5f12b932eb5cb1ac626 100644 --- a/arch/arm/lib/memcpy.S +++ b/arch/arm/lib/memcpy.S @@ -1,393 +1,59 @@ /* * linux/arch/arm/lib/memcpy.S * - * Copyright (C) 1995-1999 Russell King + * Author: Nicolas Pitre + * Created: Sep 28, 2005 + * Copyright: MontaVista Software, Inc. * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * ASM optimised string functions + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. */ + #include #include - .text - -#define ENTER \ - mov ip,sp ;\ - stmfd sp!,{r0,r4-r9,fp,ip,lr,pc} ;\ - sub fp,ip,#4 - -#define EXIT \ - LOADREGS(ea, fp, {r0, r4 - r9, fp, sp, pc}) - -#define EXITEQ \ - LOADREGS(eqea, fp, {r0, r4 - r9, fp, sp, pc}) - -/* - * Prototype: void memcpy(void *to,const void *from,unsigned long n); - */ -ENTRY(memcpy) -ENTRY(memmove) - ENTER - cmp r1, r0 - bcc 23f - subs r2, r2, #4 - blt 6f - PLD( pld [r1, #0] ) - ands ip, r0, #3 - bne 7f - ands ip, r1, #3 - bne 8f + .macro ldr1w ptr reg abort + ldr \reg, [\ptr], #4 + .endm -1: subs r2, r2, #8 - blt 5f - subs r2, r2, #20 - blt 4f - PLD( pld [r1, #28] ) - PLD( subs r2, r2, #64 ) - PLD( blt 3f ) -2: PLD( pld [r1, #60] ) - PLD( pld [r1, #92] ) - ldmia r1!, {r3 - r9, ip} - subs r2, r2, #32 - stmgeia r0!, {r3 - r9, ip} - ldmgeia r1!, {r3 - r9, ip} - subges r2, r2, #32 - stmia r0!, {r3 - r9, ip} - bge 2b -3: PLD( ldmia r1!, {r3 - r9, ip} ) - PLD( adds r2, r2, #32 ) - PLD( stmgeia r0!, {r3 - r9, ip} ) - PLD( ldmgeia r1!, {r3 - r9, ip} ) - PLD( subges r2, r2, #32 ) - PLD( stmia r0!, {r3 - r9, ip} ) -4: cmn r2, #16 - ldmgeia r1!, {r3 - r6} - subge r2, r2, #16 - stmgeia r0!, {r3 - r6} - adds r2, r2, #20 - ldmgeia r1!, {r3 - r5} - subge r2, r2, #12 - stmgeia r0!, {r3 - r5} -5: adds r2, r2, #8 - blt 6f - subs r2, r2, #4 - ldrlt r3, [r1], #4 - ldmgeia r1!, {r4, r5} - subge r2, r2, #4 - strlt r3, [r0], #4 - stmgeia r0!, {r4, r5} + .macro ldr4w ptr reg1 reg2 reg3 reg4 abort + ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4} + .endm -6: adds r2, r2, #4 - EXITEQ - cmp r2, #2 - ldrb r3, [r1], #1 - ldrgeb r4, [r1], #1 - ldrgtb r5, [r1], #1 - strb r3, [r0], #1 - strgeb r4, [r0], #1 - strgtb r5, [r0], #1 - EXIT + .macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + ldmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8} + .endm -7: rsb ip, ip, #4 - cmp ip, #2 - ldrb r3, [r1], #1 - ldrgeb r4, [r1], #1 - ldrgtb r5, [r1], #1 - strb r3, [r0], #1 - strgeb r4, [r0], #1 - strgtb r5, [r0], #1 - subs r2, r2, ip - blt 6b - ands ip, r1, #3 - beq 1b + .macro ldr1b ptr reg cond=al abort + ldr\cond\()b \reg, [\ptr], #1 + .endm -8: bic r1, r1, #3 - ldr r7, [r1], #4 - cmp ip, #2 - bgt 18f - beq 13f - cmp r2, #12 - blt 11f - PLD( pld [r1, #12] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 10f ) - PLD( pld [r1, #28] ) -9: PLD( pld [r1, #44] ) -10: mov r3, r7, pull #8 - ldmia r1!, {r4 - r7} - subs r2, r2, #16 - orr r3, r3, r4, push #24 - mov r4, r4, pull #8 - orr r4, r4, r5, push #24 - mov r5, r5, pull #8 - orr r5, r5, r6, push #24 - mov r6, r6, pull #8 - orr r6, r6, r7, push #24 - stmia r0!, {r3 - r6} - bge 9b - PLD( cmn r2, #32 ) - PLD( bge 10b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 12f -11: mov r3, r7, pull #8 - ldr r7, [r1], #4 - subs r2, r2, #4 - orr r3, r3, r7, push #24 - str r3, [r0], #4 - bge 11b -12: sub r1, r1, #3 - b 6b + .macro str1w ptr reg abort + str \reg, [\ptr], #4 + .endm -13: cmp r2, #12 - blt 16f - PLD( pld [r1, #12] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 15f ) - PLD( pld [r1, #28] ) -14: PLD( pld [r1, #44] ) -15: mov r3, r7, pull #16 - ldmia r1!, {r4 - r7} - subs r2, r2, #16 - orr r3, r3, r4, push #16 - mov r4, r4, pull #16 - orr r4, r4, r5, push #16 - mov r5, r5, pull #16 - orr r5, r5, r6, push #16 - mov r6, r6, pull #16 - orr r6, r6, r7, push #16 - stmia r0!, {r3 - r6} - bge 14b - PLD( cmn r2, #32 ) - PLD( bge 15b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 17f -16: mov r3, r7, pull #16 - ldr r7, [r1], #4 - subs r2, r2, #4 - orr r3, r3, r7, push #16 - str r3, [r0], #4 - bge 16b -17: sub r1, r1, #2 - b 6b + .macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort + stmia \ptr!, {\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8} + .endm -18: cmp r2, #12 - blt 21f - PLD( pld [r1, #12] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 20f ) - PLD( pld [r1, #28] ) -19: PLD( pld [r1, #44] ) -20: mov r3, r7, pull #24 - ldmia r1!, {r4 - r7} - subs r2, r2, #16 - orr r3, r3, r4, push #8 - mov r4, r4, pull #24 - orr r4, r4, r5, push #8 - mov r5, r5, pull #24 - orr r5, r5, r6, push #8 - mov r6, r6, pull #24 - orr r6, r6, r7, push #8 - stmia r0!, {r3 - r6} - bge 19b - PLD( cmn r2, #32 ) - PLD( bge 20b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 22f -21: mov r3, r7, pull #24 - ldr r7, [r1], #4 - subs r2, r2, #4 - orr r3, r3, r7, push #8 - str r3, [r0], #4 - bge 21b -22: sub r1, r1, #1 - b 6b + .macro str1b ptr reg cond=al abort + str\cond\()b \reg, [\ptr], #1 + .endm + .macro enter reg1 reg2 + stmdb sp!, {r0, \reg1, \reg2} + .endm -23: add r1, r1, r2 - add r0, r0, r2 - subs r2, r2, #4 - blt 29f - PLD( pld [r1, #-4] ) - ands ip, r0, #3 - bne 30f - ands ip, r1, #3 - bne 31f + .macro exit reg1 reg2 + ldmfd sp!, {r0, \reg1, \reg2} + .endm -24: subs r2, r2, #8 - blt 28f - subs r2, r2, #20 - blt 27f - PLD( pld [r1, #-32] ) - PLD( subs r2, r2, #64 ) - PLD( blt 26f ) -25: PLD( pld [r1, #-64] ) - PLD( pld [r1, #-96] ) - ldmdb r1!, {r3 - r9, ip} - subs r2, r2, #32 - stmgedb r0!, {r3 - r9, ip} - ldmgedb r1!, {r3 - r9, ip} - subges r2, r2, #32 - stmdb r0!, {r3 - r9, ip} - bge 25b -26: PLD( ldmdb r1!, {r3 - r9, ip} ) - PLD( adds r2, r2, #32 ) - PLD( stmgedb r0!, {r3 - r9, ip} ) - PLD( ldmgedb r1!, {r3 - r9, ip} ) - PLD( subges r2, r2, #32 ) - PLD( stmdb r0!, {r3 - r9, ip} ) -27: cmn r2, #16 - ldmgedb r1!, {r3 - r6} - subge r2, r2, #16 - stmgedb r0!, {r3 - r6} - adds r2, r2, #20 - ldmgedb r1!, {r3 - r5} - subge r2, r2, #12 - stmgedb r0!, {r3 - r5} -28: adds r2, r2, #8 - blt 29f - subs r2, r2, #4 - ldrlt r3, [r1, #-4]! - ldmgedb r1!, {r4, r5} - subge r2, r2, #4 - strlt r3, [r0, #-4]! - stmgedb r0!, {r4, r5} + .text -29: adds r2, r2, #4 - EXITEQ - cmp r2, #2 - ldrb r3, [r1, #-1]! - ldrgeb r4, [r1, #-1]! - ldrgtb r5, [r1, #-1]! - strb r3, [r0, #-1]! - strgeb r4, [r0, #-1]! - strgtb r5, [r0, #-1]! - EXIT +/* Prototype: void *memcpy(void *dest, const void *src, size_t n); */ -30: cmp ip, #2 - ldrb r3, [r1, #-1]! - ldrgeb r4, [r1, #-1]! - ldrgtb r5, [r1, #-1]! - strb r3, [r0, #-1]! - strgeb r4, [r0, #-1]! - strgtb r5, [r0, #-1]! - subs r2, r2, ip - blt 29b - ands ip, r1, #3 - beq 24b - -31: bic r1, r1, #3 - ldr r3, [r1], #0 - cmp ip, #2 - blt 41f - beq 36f - cmp r2, #12 - blt 34f - PLD( pld [r1, #-16] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 33f ) - PLD( pld [r1, #-32] ) -32: PLD( pld [r1, #-48] ) -33: mov r7, r3, push #8 - ldmdb r1!, {r3, r4, r5, r6} - subs r2, r2, #16 - orr r7, r7, r6, pull #24 - mov r6, r6, push #8 - orr r6, r6, r5, pull #24 - mov r5, r5, push #8 - orr r5, r5, r4, pull #24 - mov r4, r4, push #8 - orr r4, r4, r3, pull #24 - stmdb r0!, {r4, r5, r6, r7} - bge 32b - PLD( cmn r2, #32 ) - PLD( bge 33b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 35f -34: mov ip, r3, push #8 - ldr r3, [r1, #-4]! - subs r2, r2, #4 - orr ip, ip, r3, pull #24 - str ip, [r0, #-4]! - bge 34b -35: add r1, r1, #3 - b 29b - -36: cmp r2, #12 - blt 39f - PLD( pld [r1, #-16] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 38f ) - PLD( pld [r1, #-32] ) -37: PLD( pld [r1, #-48] ) -38: mov r7, r3, push #16 - ldmdb r1!, {r3, r4, r5, r6} - subs r2, r2, #16 - orr r7, r7, r6, pull #16 - mov r6, r6, push #16 - orr r6, r6, r5, pull #16 - mov r5, r5, push #16 - orr r5, r5, r4, pull #16 - mov r4, r4, push #16 - orr r4, r4, r3, pull #16 - stmdb r0!, {r4, r5, r6, r7} - bge 37b - PLD( cmn r2, #32 ) - PLD( bge 38b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 40f -39: mov ip, r3, push #16 - ldr r3, [r1, #-4]! - subs r2, r2, #4 - orr ip, ip, r3, pull #16 - str ip, [r0, #-4]! - bge 39b -40: add r1, r1, #2 - b 29b +ENTRY(memcpy) -41: cmp r2, #12 - blt 44f - PLD( pld [r1, #-16] ) - sub r2, r2, #12 - PLD( subs r2, r2, #32 ) - PLD( blt 43f ) - PLD( pld [r1, #-32] ) -42: PLD( pld [r1, #-48] ) -43: mov r7, r3, push #24 - ldmdb r1!, {r3, r4, r5, r6} - subs r2, r2, #16 - orr r7, r7, r6, pull #8 - mov r6, r6, push #24 - orr r6, r6, r5, pull #8 - mov r5, r5, push #24 - orr r5, r5, r4, pull #8 - mov r4, r4, push #24 - orr r4, r4, r3, pull #8 - stmdb r0!, {r4, r5, r6, r7} - bge 42b - PLD( cmn r2, #32 ) - PLD( bge 43b ) - PLD( add r2, r2, #32 ) - adds r2, r2, #12 - blt 45f -44: mov ip, r3, push #24 - ldr r3, [r1, #-4]! - subs r2, r2, #4 - orr ip, ip, r3, pull #8 - str ip, [r0, #-4]! - bge 44b -45: add r1, r1, #1 - b 29b +#include "copy_template.S" diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S new file mode 100644 index 0000000000000000000000000000000000000000..ef7fddc14ac989bd6dca30f204cadeb92317b133 --- /dev/null +++ b/arch/arm/lib/memmove.S @@ -0,0 +1,206 @@ +/* + * linux/arch/arm/lib/memmove.S + * + * Author: Nicolas Pitre + * Created: Sep 28, 2005 + * Copyright: (C) MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +/* + * This can be used to enable code to cacheline align the source pointer. + * Experiments on tested architectures (StrongARM and XScale) didn't show + * this a worthwhile thing to do. That might be different in the future. + */ +//#define CALGN(code...) code +#define CALGN(code...) + + .text + +/* + * Prototype: void *memmove(void *dest, const void *src, size_t n); + * + * Note: + * + * If the memory regions don't overlap, we simply branch to memcpy which is + * normally a bit faster. Otherwise the copy is done going downwards. This + * is a transposition of the code from copy_template.S but with the copy + * occurring in the opposite direction. + */ + +ENTRY(memmove) + + subs ip, r0, r1 + cmphi r2, ip + bls memcpy + + stmfd sp!, {r0, r4, lr} + add r1, r1, r2 + add r0, r0, r2 + subs r2, r2, #4 + blt 8f + ands ip, r0, #3 + PLD( pld [r1, #-4] ) + bne 9f + ands ip, r1, #3 + bne 10f + +1: subs r2, r2, #(28) + stmfd sp!, {r5 - r8} + blt 5f + + CALGN( ands ip, r1, #31 ) + CALGN( sbcnes r4, ip, r2 ) @ C is always set here + CALGN( bcs 2f ) + CALGN( adr r4, 6f ) + CALGN( subs r2, r2, ip ) @ C is set here + CALGN( add pc, r4, ip ) + + PLD( pld [r1, #-4] ) +2: PLD( subs r2, r2, #96 ) + PLD( pld [r1, #-32] ) + PLD( blt 4f ) + PLD( pld [r1, #-64] ) + PLD( pld [r1, #-96] ) + +3: PLD( pld [r1, #-128] ) +4: ldmdb r1!, {r3, r4, r5, r6, r7, r8, ip, lr} + subs r2, r2, #32 + stmdb r0!, {r3, r4, r5, r6, r7, r8, ip, lr} + bge 3b + PLD( cmn r2, #96 ) + PLD( bge 4b ) + +5: ands ip, r2, #28 + rsb ip, ip, #32 + addne pc, pc, ip @ C is always clear here + b 7f +6: nop + ldr r3, [r1, #-4]! + ldr r4, [r1, #-4]! + ldr r5, [r1, #-4]! + ldr r6, [r1, #-4]! + ldr r7, [r1, #-4]! + ldr r8, [r1, #-4]! + ldr lr, [r1, #-4]! + + add pc, pc, ip + nop + nop + str r3, [r0, #-4]! + str r4, [r0, #-4]! + str r5, [r0, #-4]! + str r6, [r0, #-4]! + str r7, [r0, #-4]! + str r8, [r0, #-4]! + str lr, [r0, #-4]! + + CALGN( bcs 2b ) + +7: ldmfd sp!, {r5 - r8} + +8: movs r2, r2, lsl #31 + ldrneb r3, [r1, #-1]! + ldrcsb r4, [r1, #-1]! + ldrcsb ip, [r1, #-1] + strneb r3, [r0, #-1]! + strcsb r4, [r0, #-1]! + strcsb ip, [r0, #-1] + ldmfd sp!, {r0, r4, pc} + +9: cmp ip, #2 + ldrgtb r3, [r1, #-1]! + ldrgeb r4, [r1, #-1]! + ldrb lr, [r1, #-1]! + strgtb r3, [r0, #-1]! + strgeb r4, [r0, #-1]! + subs r2, r2, ip + strb lr, [r0, #-1]! + blt 8b + ands ip, r1, #3 + beq 1b + +10: bic r1, r1, #3 + cmp ip, #2 + ldr r3, [r1, #0] + beq 17f + blt 18f + + + .macro backward_copy_shift push pull + + subs r2, r2, #28 + blt 14f + + CALGN( ands ip, r1, #31 ) + CALGN( rsb ip, ip, #32 ) + CALGN( sbcnes r4, ip, r2 ) @ C is always set here + CALGN( subcc r2, r2, ip ) + CALGN( bcc 15f ) + +11: stmfd sp!, {r5 - r9} + + PLD( pld [r1, #-4] ) + PLD( subs r2, r2, #96 ) + PLD( pld [r1, #-32] ) + PLD( blt 13f ) + PLD( pld [r1, #-64] ) + PLD( pld [r1, #-96] ) + +12: PLD( pld [r1, #-128] ) +13: ldmdb r1!, {r7, r8, r9, ip} + mov lr, r3, push #\push + subs r2, r2, #32 + ldmdb r1!, {r3, r4, r5, r6} + orr lr, lr, ip, pull #\pull + mov ip, ip, push #\push + orr ip, ip, r9, pull #\pull + mov r9, r9, push #\push + orr r9, r9, r8, pull #\pull + mov r8, r8, push #\push + orr r8, r8, r7, pull #\pull + mov r7, r7, push #\push + orr r7, r7, r6, pull #\pull + mov r6, r6, push #\push + orr r6, r6, r5, pull #\pull + mov r5, r5, push #\push + orr r5, r5, r4, pull #\pull + mov r4, r4, push #\push + orr r4, r4, r3, pull #\pull + stmdb r0!, {r4 - r9, ip, lr} + bge 12b + PLD( cmn r2, #96 ) + PLD( bge 13b ) + + ldmfd sp!, {r5 - r9} + +14: ands ip, r2, #28 + beq 16f + +15: mov lr, r3, push #\push + ldr r3, [r1, #-4]! + subs ip, ip, #4 + orr lr, lr, r3, pull #\pull + str lr, [r0, #-4]! + bgt 15b + CALGN( cmp r2, #0 ) + CALGN( bge 11b ) + +16: add r1, r1, #(\pull / 8) + b 8b + + .endm + + + backward_copy_shift push=8 pull=24 + +17: backward_copy_shift push=16 pull=16 + +18: backward_copy_shift push=24 pull=8 + diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S index d3ed0636c00859e3f5e9c34d916981b4d42a36ad..c28449157beacb33d16f562b105e6c69a2e3652a 100644 --- a/arch/arm/lib/uaccess.S +++ b/arch/arm/lib/uaccess.S @@ -657,41 +657,3 @@ USER( ldrgtbt r3, [r1], #1) @ May fault LOADREGS(fd,sp!, {r4 - r7, pc}) .previous -/* Prototype: int __arch_clear_user(void *addr, size_t sz) - * Purpose : clear some user memory - * Params : addr - user memory address to clear - * : sz - number of bytes to clear - * Returns : number of bytes NOT cleared - */ -ENTRY(__arch_clear_user) - stmfd sp!, {r1, lr} - mov r2, #0 - cmp r1, #4 - blt 2f - ands ip, r0, #3 - beq 1f - cmp ip, #2 -USER( strbt r2, [r0], #1) -USER( strlebt r2, [r0], #1) -USER( strltbt r2, [r0], #1) - rsb ip, ip, #4 - sub r1, r1, ip @ 7 6 5 4 3 2 1 -1: subs r1, r1, #8 @ -1 -2 -3 -4 -5 -6 -7 -USER( strplt r2, [r0], #4) -USER( strplt r2, [r0], #4) - bpl 1b - adds r1, r1, #4 @ 3 2 1 0 -1 -2 -3 -USER( strplt r2, [r0], #4) -2: tst r1, #2 @ 1x 1x 0x 0x 1x 1x 0x -USER( strnebt r2, [r0], #1) -USER( strnebt r2, [r0], #1) - tst r1, #1 @ x1 x0 x1 x0 x1 x0 x1 -USER( strnebt r2, [r0], #1) - mov r0, #0 - LOADREGS(fd,sp!, {r1, pc}) - - .section .fixup,"ax" - .align 0 -9001: LOADREGS(fd,sp!, {r0, pc}) - .previous - diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 15261646dcdd58bd509b86ac926e6796b6ad171b..ed4614983adbea91024a70970305d68cd62154c8 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -251,9 +251,33 @@ static struct platform_device serial_device = { }, }; +static struct resource am79c961_resources[] = { + { + .start = 0x220, + .end = 0x238, + .flags = IORESOURCE_IO, + }, { + .start = IRQ_EBSA110_ETHERNET, + .end = IRQ_EBSA110_ETHERNET, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device am79c961_device = { + .name = "am79c961", + .id = -1, + .num_resources = ARRAY_SIZE(am79c961_resources), + .resource = am79c961_resources, +}; + +static struct platform_device *ebsa110_devices[] = { + &serial_device, + &am79c961_device, +}; + static int __init ebsa110_init(void) { - return platform_device_register(&serial_device); + return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices)); } arch_initcall(ebsa110_init); diff --git a/arch/arm/mach-ixp2000/Makefile b/arch/arm/mach-ixp2000/Makefile index 1e6139d42a925b181a48e467f7a380538df278b6..9621aeb61f46c00ee62091d5cd36e44223cccdbf 100644 --- a/arch/arm/mach-ixp2000/Makefile +++ b/arch/arm/mach-ixp2000/Makefile @@ -1,7 +1,7 @@ # # Makefile for the linux kernel. # -obj-y := core.o pci.o +obj-y := core.o pci.o uengine.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 01c393c504d0ba3cb4447af6d19e141b47ad25e0..c93a98b2a32c07108f31d490fd1d35ecf91bacc1 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-ixp2000/common.c + * arch/arm/mach-ixp2000/core.c * * Common routines used by all IXP2400/2800 based platforms. * @@ -49,7 +49,6 @@ static unsigned long ixp2000_slowport_irq_flags; *************************************************************************/ void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg *old_cfg) { - spin_lock_irqsave(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags); old_cfg->CCR = *IXP2000_SLOWPORT_CCR; @@ -62,7 +61,7 @@ void ixp2000_acquire_slowport(struct slowport_cfg *new_cfg, struct slowport_cfg ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, new_cfg->WTC); ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, new_cfg->RTC); ixp2000_reg_write(IXP2000_SLOWPORT_PCR, new_cfg->PCR); - ixp2000_reg_write(IXP2000_SLOWPORT_ADC, new_cfg->ADC); + ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, new_cfg->ADC); } void ixp2000_release_slowport(struct slowport_cfg *old_cfg) @@ -71,7 +70,7 @@ void ixp2000_release_slowport(struct slowport_cfg *old_cfg) ixp2000_reg_write(IXP2000_SLOWPORT_WTC2, old_cfg->WTC); ixp2000_reg_write(IXP2000_SLOWPORT_RTC2, old_cfg->RTC); ixp2000_reg_write(IXP2000_SLOWPORT_PCR, old_cfg->PCR); - ixp2000_reg_write(IXP2000_SLOWPORT_ADC, old_cfg->ADC); + ixp2000_reg_wrb(IXP2000_SLOWPORT_ADC, old_cfg->ADC); spin_unlock_irqrestore(&ixp2000_slowport_lock, ixp2000_slowport_irq_flags); @@ -145,7 +144,7 @@ void __init ixp2000_map_io(void) iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc)); /* Set slowport to 8-bit mode. */ - ixp2000_reg_write(IXP2000_SLOWPORT_FRM, 1); + ixp2000_reg_wrb(IXP2000_SLOWPORT_FRM, 1); } @@ -209,7 +208,7 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) write_seqlock(&xtime_lock); /* clear timer 1 */ - ixp2000_reg_write(IXP2000_T1_CLR, 1); + ixp2000_reg_wrb(IXP2000_T1_CLR, 1); while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) { timer_tick(regs); @@ -252,12 +251,12 @@ void __init ixp2000_init_time(unsigned long tick_rate) ixp2000_reg_write(IXP2000_T4_CLR, 0); ixp2000_reg_write(IXP2000_T4_CLD, -1); - ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7)); + ixp2000_reg_wrb(IXP2000_T4_CTL, (1 << 7)); missing_jiffy_timer_csr = IXP2000_T4_CSR; } else { ixp2000_reg_write(IXP2000_T2_CLR, 0); ixp2000_reg_write(IXP2000_T2_CLD, -1); - ixp2000_reg_write(IXP2000_T2_CTL, (1 << 7)); + ixp2000_reg_wrb(IXP2000_T2_CTL, (1 << 7)); missing_jiffy_timer_csr = IXP2000_T2_CSR; } next_jiffy_time = 0xffffffff; @@ -279,7 +278,7 @@ static void update_gpio_int_csrs(void) ixp2000_reg_write(IXP2000_GPIO_FEDR, GPIO_IRQ_falling_edge); ixp2000_reg_write(IXP2000_GPIO_REDR, GPIO_IRQ_rising_edge); ixp2000_reg_write(IXP2000_GPIO_LSLR, GPIO_IRQ_level_low); - ixp2000_reg_write(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); + ixp2000_reg_wrb(IXP2000_GPIO_LSHR, GPIO_IRQ_level_high); } void gpio_line_config(int line, int direction) @@ -297,9 +296,9 @@ void gpio_line_config(int line, int direction) GPIO_IRQ_level_high &= ~(1 << line); update_gpio_int_csrs(); - ixp2000_reg_write(IXP2000_GPIO_PDSR, 1 << line); + ixp2000_reg_wrb(IXP2000_GPIO_PDSR, 1 << line); } else if (direction == GPIO_IN) { - ixp2000_reg_write(IXP2000_GPIO_PDCR, 1 << line); + ixp2000_reg_wrb(IXP2000_GPIO_PDCR, 1 << line); } local_irq_restore(flags); } @@ -365,12 +364,12 @@ static void ixp2000_GPIO_irq_mask_ack(unsigned int irq) ixp2000_reg_write(IXP2000_GPIO_EDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); ixp2000_reg_write(IXP2000_GPIO_LDSR, (1 << (irq - IRQ_IXP2000_GPIO0))); - ixp2000_reg_write(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); + ixp2000_reg_wrb(IXP2000_GPIO_INST, (1 << (irq - IRQ_IXP2000_GPIO0))); } static void ixp2000_GPIO_irq_mask(unsigned int irq) { - ixp2000_reg_write(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); + ixp2000_reg_wrb(IXP2000_GPIO_INCR, (1 << (irq - IRQ_IXP2000_GPIO0))); } static void ixp2000_GPIO_irq_unmask(unsigned int irq) @@ -389,9 +388,9 @@ static void ixp2000_pci_irq_mask(unsigned int irq) { unsigned long temp = *IXP2000_PCI_XSCALE_INT_ENABLE; if (irq == IRQ_IXP2000_PCIA) - ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26))); + ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 26))); else if (irq == IRQ_IXP2000_PCIB) - ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27))); + ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, (temp & ~(1 << 27))); } static void ixp2000_pci_irq_unmask(unsigned int irq) @@ -411,7 +410,7 @@ static struct irqchip ixp2000_pci_irq_chip = { static void ixp2000_irq_mask(unsigned int irq) { - ixp2000_reg_write(IXP2000_IRQ_ENABLE_CLR, (1 << irq)); + ixp2000_reg_wrb(IXP2000_IRQ_ENABLE_CLR, (1 << irq)); } static void ixp2000_irq_unmask(unsigned int irq) @@ -443,7 +442,7 @@ void __init ixp2000_init_irq(void) ixp2000_reg_write(IXP2000_GPIO_INCR, -1); /* clear PCI interrupt sources */ - ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, 0); + ixp2000_reg_wrb(IXP2000_PCI_XSCALE_INT_ENABLE, 0); /* * Certain bits in the IRQ status register of the diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 643f5e1c3d9311d70a9c589f34ca344cc979760c..7719c478aa84b6d44ac9230ac96d1ea71a7400bf 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -63,6 +63,35 @@ static struct sys_timer enp2611_timer = { }; +/************************************************************************* + * ENP-2611 I/O + *************************************************************************/ +static struct map_desc enp2611_io_desc[] __initdata = { + { + .virtual = ENP2611_CALEB_VIRT_BASE, + .physical = ENP2611_CALEB_PHYS_BASE, + .length = ENP2611_CALEB_SIZE, + .type = MT_IXP2000_DEVICE + }, { + .virtual = ENP2611_PM3386_0_VIRT_BASE, + .physical = ENP2611_PM3386_0_PHYS_BASE, + .length = ENP2611_PM3386_0_SIZE, + .type = MT_IXP2000_DEVICE + }, { + .virtual = ENP2611_PM3386_1_VIRT_BASE, + .physical = ENP2611_PM3386_1_PHYS_BASE, + .length = ENP2611_PM3386_1_SIZE, + .type = MT_IXP2000_DEVICE + } +}; + +void __init enp2611_map_io(void) +{ + ixp2000_map_io(); + iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc)); +} + + /************************************************************************* * ENP-2611 PCI *************************************************************************/ @@ -229,7 +258,7 @@ MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board") .phys_io = IXP2000_UART_PHYS_BASE, .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, .boot_params = 0x00000100, - .map_io = ixp2000_map_io, + .map_io = enp2611_map_io, .init_irq = ixp2000_init_irq, .timer = &enp2611_timer, .init_machine = enp2611_init_machine, diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 05dfcb48c2b62839eb66dfb8dec0eed8fe72e3d5..d628da56b4bcf6d4ee5db0cfdc236f137880e8d4 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -81,7 +81,7 @@ static void ixdp2x00_irq_mask(unsigned int irq) dummy = *board_irq_mask; dummy |= IXP2000_BOARD_IRQ_MASK(irq); - ixp2000_reg_write(board_irq_mask, dummy); + ixp2000_reg_wrb(board_irq_mask, dummy); #ifdef CONFIG_ARCH_IXDP2400 if (machine_is_ixdp2400()) @@ -101,7 +101,7 @@ static void ixdp2x00_irq_unmask(unsigned int irq) dummy = *board_irq_mask; dummy &= ~IXP2000_BOARD_IRQ_MASK(irq); - ixp2000_reg_write(board_irq_mask, dummy); + ixp2000_reg_wrb(board_irq_mask, dummy); if (machine_is_ixdp2400()) ixp2000_release_slowport(&old_cfg); diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index b21249908ae4185819ce2f24588a0462371c0332..e6a882f35da2bf8a43397716a7ca9a2b65077eed 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -51,7 +51,7 @@ *************************************************************************/ static void ixdp2x01_irq_mask(unsigned int irq) { - ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, + ixp2000_reg_wrb(IXDP2X01_INT_MASK_SET_REG, IXP2000_BOARD_IRQ_MASK(irq)); } @@ -114,7 +114,7 @@ void __init ixdp2x01_init_irq(void) /* Mask all interrupts from CPLD, disable simulation */ ixp2000_reg_write(IXDP2X01_INT_MASK_SET_REG, 0xffffffff); - ixp2000_reg_write(IXDP2X01_INT_SIM_REG, 0); + ixp2000_reg_wrb(IXDP2X01_INT_SIM_REG, 0); for (irq = NR_IXP2000_IRQS; irq < NR_IXDP2X01_IRQS; irq++) { if (irq & valid_irq_mask) { @@ -299,7 +299,6 @@ struct hw_pci ixdp2x01_pci __initdata = { int __init ixdp2x01_pci_init(void) { - pci_common_init(&ixdp2x01_pci); return 0; } @@ -316,7 +315,7 @@ static struct flash_platform_data ixdp2x01_flash_platform_data = { static unsigned long ixdp2x01_flash_bank_setup(unsigned long ofs) { - ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, + ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG, ((ofs >> IXDP2X01_FLASH_WINDOW_BITS) | IXDP2X01_CPLD_FLASH_INTERN)); return (ofs & IXDP2X01_FLASH_WINDOW_MASK); } @@ -363,7 +362,7 @@ static struct platform_device *ixdp2x01_devices[] __initdata = { static void __init ixdp2x01_init_machine(void) { - ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, + ixp2000_reg_wrb(IXDP2X01_CPLD_FLASH_REG, (IXDP2X01_CPLD_FLASH_BANK_MASK | IXDP2X01_CPLD_FLASH_INTERN)); ixdp2x01_flash_data.nr_banks = diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index 522205acb316fc6745d73732481fddf5cd094de7..d4bf1e1c0031c5e79a1051790a02c817c6b3218d 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -148,7 +148,7 @@ int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_re local_irq_save(flags); temp = *(IXP2000_PCI_CONTROL); if (temp & ((1 << 8) | (1 << 5))) { - ixp2000_reg_write(IXP2000_PCI_CONTROL, temp); + ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp); } temp = *(IXP2000_PCI_CMDSTAT); @@ -178,8 +178,8 @@ clear_master_aborts(void) local_irq_save(flags); temp = *(IXP2000_PCI_CONTROL); - if (temp & ((1 << 8) | (1 << 5))) { - ixp2000_reg_write(IXP2000_PCI_CONTROL, temp); + if (temp & ((1 << 8) | (1 << 5))) { + ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp); } temp = *(IXP2000_PCI_CMDSTAT); diff --git a/arch/arm/mach-ixp2000/uengine.c b/arch/arm/mach-ixp2000/uengine.c new file mode 100644 index 0000000000000000000000000000000000000000..43e234349d4a66fd642e050b90d8825ee793a3c5 --- /dev/null +++ b/arch/arm/mach-ixp2000/uengine.c @@ -0,0 +1,474 @@ +/* + * Generic library functions for the microengines found on the Intel + * IXP2000 series of network processors. + * + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of the + * License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define USTORE_ADDRESS 0x000 +#define USTORE_DATA_LOWER 0x004 +#define USTORE_DATA_UPPER 0x008 +#define CTX_ENABLES 0x018 +#define CC_ENABLE 0x01c +#define CSR_CTX_POINTER 0x020 +#define INDIRECT_CTX_STS 0x040 +#define ACTIVE_CTX_STS 0x044 +#define INDIRECT_CTX_SIG_EVENTS 0x048 +#define INDIRECT_CTX_WAKEUP_EVENTS 0x050 +#define NN_PUT 0x080 +#define NN_GET 0x084 +#define TIMESTAMP_LOW 0x0c0 +#define TIMESTAMP_HIGH 0x0c4 +#define T_INDEX_BYTE_INDEX 0x0f4 +#define LOCAL_CSR_STATUS 0x180 + +u32 ixp2000_uengine_mask; + +static void *ixp2000_uengine_csr_area(int uengine) +{ + return ((void *)IXP2000_UENGINE_CSR_VIRT_BASE) + (uengine << 10); +} + +/* + * LOCAL_CSR_STATUS=1 after a read or write to a microengine's CSR + * space means that the microengine we tried to access was also trying + * to access its own CSR space on the same clock cycle as we did. When + * this happens, we lose the arbitration process by default, and the + * read or write we tried to do was not actually performed, so we try + * again until it succeeds. + */ +u32 ixp2000_uengine_csr_read(int uengine, int offset) +{ + void *uebase; + u32 *local_csr_status; + u32 *reg; + u32 value; + + uebase = ixp2000_uengine_csr_area(uengine); + + local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS); + reg = (u32 *)(uebase + offset); + do { + value = ixp2000_reg_read(reg); + } while (ixp2000_reg_read(local_csr_status) & 1); + + return value; +} +EXPORT_SYMBOL(ixp2000_uengine_csr_read); + +void ixp2000_uengine_csr_write(int uengine, int offset, u32 value) +{ + void *uebase; + u32 *local_csr_status; + u32 *reg; + + uebase = ixp2000_uengine_csr_area(uengine); + + local_csr_status = (u32 *)(uebase + LOCAL_CSR_STATUS); + reg = (u32 *)(uebase + offset); + do { + ixp2000_reg_write(reg, value); + } while (ixp2000_reg_read(local_csr_status) & 1); +} +EXPORT_SYMBOL(ixp2000_uengine_csr_write); + +void ixp2000_uengine_reset(u32 uengine_mask) +{ + ixp2000_reg_write(IXP2000_RESET1, uengine_mask & ixp2000_uengine_mask); + ixp2000_reg_write(IXP2000_RESET1, 0); +} +EXPORT_SYMBOL(ixp2000_uengine_reset); + +void ixp2000_uengine_set_mode(int uengine, u32 mode) +{ + /* + * CTL_STR_PAR_EN: unconditionally enable parity checking on + * control store. + */ + mode |= 0x10000000; + ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mode); + + /* + * Enable updating of condition codes. + */ + ixp2000_uengine_csr_write(uengine, CC_ENABLE, 0x00002000); + + /* + * Initialise other per-microengine registers. + */ + ixp2000_uengine_csr_write(uengine, NN_PUT, 0x00); + ixp2000_uengine_csr_write(uengine, NN_GET, 0x00); + ixp2000_uengine_csr_write(uengine, T_INDEX_BYTE_INDEX, 0); +} +EXPORT_SYMBOL(ixp2000_uengine_set_mode); + +static int make_even_parity(u32 x) +{ + return hweight32(x) & 1; +} + +static void ustore_write(int uengine, u64 insn) +{ + /* + * Generate even parity for top and bottom 20 bits. + */ + insn |= (u64)make_even_parity((insn >> 20) & 0x000fffff) << 41; + insn |= (u64)make_even_parity(insn & 0x000fffff) << 40; + + /* + * Write to microstore. The second write auto-increments + * the USTORE_ADDRESS index register. + */ + ixp2000_uengine_csr_write(uengine, USTORE_DATA_LOWER, (u32)insn); + ixp2000_uengine_csr_write(uengine, USTORE_DATA_UPPER, (u32)(insn >> 32)); +} + +void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns) +{ + int i; + + /* + * Start writing to microstore at address 0. + */ + ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x80000000); + for (i = 0; i < insns; i++) { + u64 insn; + + insn = (((u64)ucode[0]) << 32) | + (((u64)ucode[1]) << 24) | + (((u64)ucode[2]) << 16) | + (((u64)ucode[3]) << 8) | + ((u64)ucode[4]); + ucode += 5; + + ustore_write(uengine, insn); + } + + /* + * Pad with a few NOPs at the end (to avoid the microengine + * aborting as it prefetches beyond the last instruction), unless + * we run off the end of the instruction store first, at which + * point the address register will wrap back to zero. + */ + for (i = 0; i < 4; i++) { + u32 addr; + + addr = ixp2000_uengine_csr_read(uengine, USTORE_ADDRESS); + if (addr == 0x80000000) + break; + ustore_write(uengine, 0xf0000c0300ULL); + } + + /* + * End programming. + */ + ixp2000_uengine_csr_write(uengine, USTORE_ADDRESS, 0x00000000); +} +EXPORT_SYMBOL(ixp2000_uengine_load_microcode); + +void ixp2000_uengine_init_context(int uengine, int context, int pc) +{ + /* + * Select the right context for indirect access. + */ + ixp2000_uengine_csr_write(uengine, CSR_CTX_POINTER, context); + + /* + * Initialise signal masks to immediately go to Ready state. + */ + ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_SIG_EVENTS, 1); + ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_WAKEUP_EVENTS, 1); + + /* + * Set program counter. + */ + ixp2000_uengine_csr_write(uengine, INDIRECT_CTX_STS, pc); +} +EXPORT_SYMBOL(ixp2000_uengine_init_context); + +void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask) +{ + u32 mask; + + /* + * Enable the specified context to go to Executing state. + */ + mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES); + mask |= ctx_mask << 8; + ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask); +} +EXPORT_SYMBOL(ixp2000_uengine_start_contexts); + +void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask) +{ + u32 mask; + + /* + * Disable the Ready->Executing transition. Note that this + * does not stop the context until it voluntarily yields. + */ + mask = ixp2000_uengine_csr_read(uengine, CTX_ENABLES); + mask &= ~(ctx_mask << 8); + ixp2000_uengine_csr_write(uengine, CTX_ENABLES, mask); +} +EXPORT_SYMBOL(ixp2000_uengine_stop_contexts); + +static int check_ixp_type(struct ixp2000_uengine_code *c) +{ + u32 product_id; + u32 rev; + + product_id = ixp2000_reg_read(IXP2000_PRODUCT_ID); + if (((product_id >> 16) & 0x1f) != 0) + return 0; + + switch ((product_id >> 8) & 0xff) { + case 0: /* IXP2800 */ + if (!(c->cpu_model_bitmask & 4)) + return 0; + break; + + case 1: /* IXP2850 */ + if (!(c->cpu_model_bitmask & 8)) + return 0; + break; + + case 2: /* IXP2400 */ + if (!(c->cpu_model_bitmask & 2)) + return 0; + break; + + default: + return 0; + } + + rev = product_id & 0xff; + if (rev < c->cpu_min_revision || rev > c->cpu_max_revision) + return 0; + + return 1; +} + +static void generate_ucode(u8 *ucode, u32 *gpr_a, u32 *gpr_b) +{ + int offset; + int i; + + offset = 0; + + for (i = 0; i < 128; i++) { + u8 b3; + u8 b2; + u8 b1; + u8 b0; + + b3 = (gpr_a[i] >> 24) & 0xff; + b2 = (gpr_a[i] >> 16) & 0xff; + b1 = (gpr_a[i] >> 8) & 0xff; + b0 = gpr_a[i] & 0xff; + + // immed[@ai, (b1 << 8) | b0] + // 11110000 0000VVVV VVVV11VV VVVVVV00 1IIIIIII + ucode[offset++] = 0xf0; + ucode[offset++] = (b1 >> 4); + ucode[offset++] = (b1 << 4) | 0x0c | (b0 >> 6); + ucode[offset++] = (b0 << 2); + ucode[offset++] = 0x80 | i; + + // immed_w1[@ai, (b3 << 8) | b2] + // 11110100 0100VVVV VVVV11VV VVVVVV00 1IIIIIII + ucode[offset++] = 0xf4; + ucode[offset++] = 0x40 | (b3 >> 4); + ucode[offset++] = (b3 << 4) | 0x0c | (b2 >> 6); + ucode[offset++] = (b2 << 2); + ucode[offset++] = 0x80 | i; + } + + for (i = 0; i < 128; i++) { + u8 b3; + u8 b2; + u8 b1; + u8 b0; + + b3 = (gpr_b[i] >> 24) & 0xff; + b2 = (gpr_b[i] >> 16) & 0xff; + b1 = (gpr_b[i] >> 8) & 0xff; + b0 = gpr_b[i] & 0xff; + + // immed[@bi, (b1 << 8) | b0] + // 11110000 0000VVVV VVVV001I IIIIII11 VVVVVVVV + ucode[offset++] = 0xf0; + ucode[offset++] = (b1 >> 4); + ucode[offset++] = (b1 << 4) | 0x02 | (i >> 6); + ucode[offset++] = (i << 2) | 0x03; + ucode[offset++] = b0; + + // immed_w1[@bi, (b3 << 8) | b2] + // 11110100 0100VVVV VVVV001I IIIIII11 VVVVVVVV + ucode[offset++] = 0xf4; + ucode[offset++] = 0x40 | (b3 >> 4); + ucode[offset++] = (b3 << 4) | 0x02 | (i >> 6); + ucode[offset++] = (i << 2) | 0x03; + ucode[offset++] = b2; + } + + // ctx_arb[kill] + ucode[offset++] = 0xe0; + ucode[offset++] = 0x00; + ucode[offset++] = 0x01; + ucode[offset++] = 0x00; + ucode[offset++] = 0x00; +} + +static int set_initial_registers(int uengine, struct ixp2000_uengine_code *c) +{ + int per_ctx_regs; + u32 *gpr_a; + u32 *gpr_b; + u8 *ucode; + int i; + + gpr_a = kmalloc(128 * sizeof(u32), GFP_KERNEL); + gpr_b = kmalloc(128 * sizeof(u32), GFP_KERNEL); + ucode = kmalloc(513 * 5, GFP_KERNEL); + if (gpr_a == NULL || gpr_b == NULL || ucode == NULL) { + kfree(ucode); + kfree(gpr_b); + kfree(gpr_a); + return 1; + } + + per_ctx_regs = 16; + if (c->uengine_parameters & IXP2000_UENGINE_4_CONTEXTS) + per_ctx_regs = 32; + + memset(gpr_a, 0, sizeof(gpr_a)); + memset(gpr_b, 0, sizeof(gpr_b)); + for (i = 0; i < 256; i++) { + struct ixp2000_reg_value *r = c->initial_reg_values + i; + u32 *bank; + int inc; + int j; + + if (r->reg == -1) + break; + + bank = (r->reg & 0x400) ? gpr_b : gpr_a; + inc = (r->reg & 0x80) ? 128 : per_ctx_regs; + + j = r->reg & 0x7f; + while (j < 128) { + bank[j] = r->value; + j += inc; + } + } + + generate_ucode(ucode, gpr_a, gpr_b); + ixp2000_uengine_load_microcode(uengine, ucode, 513); + ixp2000_uengine_init_context(uengine, 0, 0); + ixp2000_uengine_start_contexts(uengine, 0x01); + for (i = 0; i < 100; i++) { + u32 status; + + status = ixp2000_uengine_csr_read(uengine, ACTIVE_CTX_STS); + if (!(status & 0x80000000)) + break; + } + ixp2000_uengine_stop_contexts(uengine, 0x01); + + kfree(ucode); + kfree(gpr_b); + kfree(gpr_a); + + return !!(i == 100); +} + +int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c) +{ + int ctx; + + if (!check_ixp_type(c)) + return 1; + + if (!(ixp2000_uengine_mask & (1 << uengine))) + return 1; + + ixp2000_uengine_reset(1 << uengine); + ixp2000_uengine_set_mode(uengine, c->uengine_parameters); + if (set_initial_registers(uengine, c)) + return 1; + ixp2000_uengine_load_microcode(uengine, c->insns, c->num_insns); + + for (ctx = 0; ctx < 8; ctx++) + ixp2000_uengine_init_context(uengine, ctx, 0); + + return 0; +} +EXPORT_SYMBOL(ixp2000_uengine_load); + + +static int __init ixp2000_uengine_init(void) +{ + int uengine; + u32 value; + + /* + * Determine number of microengines present. + */ + switch ((ixp2000_reg_read(IXP2000_PRODUCT_ID) >> 8) & 0x1fff) { + case 0: /* IXP2800 */ + case 1: /* IXP2850 */ + ixp2000_uengine_mask = 0x00ff00ff; + break; + + case 2: /* IXP2400 */ + ixp2000_uengine_mask = 0x000f000f; + break; + + default: + printk(KERN_INFO "Detected unknown IXP2000 model (%.8x)\n", + (unsigned int)ixp2000_reg_read(IXP2000_PRODUCT_ID)); + ixp2000_uengine_mask = 0x00000000; + break; + } + + /* + * Reset microengines. + */ + ixp2000_reg_write(IXP2000_RESET1, ixp2000_uengine_mask); + ixp2000_reg_write(IXP2000_RESET1, 0); + + /* + * Synchronise timestamp counters across all microengines. + */ + value = ixp2000_reg_read(IXP2000_MISC_CONTROL); + ixp2000_reg_write(IXP2000_MISC_CONTROL, value & ~0x80); + for (uengine = 0; uengine < 32; uengine++) { + if (ixp2000_uengine_mask & (1 << uengine)) { + ixp2000_uengine_csr_write(uengine, TIMESTAMP_LOW, 0); + ixp2000_uengine_csr_write(uengine, TIMESTAMP_HIGH, 0); + } + } + ixp2000_reg_write(IXP2000_MISC_CONTROL, value | 0x80); + + return 0; +} + +subsys_initcall(ixp2000_uengine_init); diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 1f6857d7747d8d5ac0ddc777c728bb08a864552a..9c6e77faec5b68ed7211ba430733eeb1cfa307e7 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -175,7 +175,7 @@ static struct platform_device sa1111_device = { static struct resource smc91x_resources[] = { [0] = { .name = "smc91x-regs", - .start = 0x0c000000, + .start = 0x0c000c00, .end = 0x0c0fffff, .flags = IORESOURCE_MEM, }, @@ -224,18 +224,75 @@ static struct pxafb_mach_info sharp_lm8v31 __initdata = { .lccr3 = LCCR3_PCP | LCCR3_Acb(255), }; -static int lubbock_mci_init(struct device *dev, irqreturn_t (*lubbock_detect_int)(int, void *, struct pt_regs *), void *data) +#define MMC_POLL_RATE msecs_to_jiffies(1000) + +static void lubbock_mmc_poll(unsigned long); +static irqreturn_t (*mmc_detect_int)(int, void *, struct pt_regs *); + +static struct timer_list mmc_timer = { + .function = lubbock_mmc_poll, +}; + +static void lubbock_mmc_poll(unsigned long data) +{ + unsigned long flags; + + /* clear any previous irq state, then ... */ + local_irq_save(flags); + LUB_IRQ_SET_CLR &= ~(1 << 0); + local_irq_restore(flags); + + /* poll until mmc/sd card is removed */ + if (LUB_IRQ_SET_CLR & (1 << 0)) + mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE); + else { + (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data, NULL); + enable_irq(LUBBOCK_SD_IRQ); + } +} + +static irqreturn_t lubbock_detect_int(int irq, void *data, struct pt_regs *regs) +{ + /* IRQ is level triggered; disable, and poll for removal */ + disable_irq(irq); + mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE); + + return mmc_detect_int(irq, data, regs); +} + +static int lubbock_mci_init(struct device *dev, + irqreturn_t (*detect_int)(int, void *, struct pt_regs *), + void *data) { /* setup GPIO for PXA25x MMC controller */ pxa_gpio_mode(GPIO6_MMCCLK_MD); pxa_gpio_mode(GPIO8_MMCCS0_MD); - return 0; + /* detect card insert/eject */ + mmc_detect_int = detect_int; + init_timer(&mmc_timer); + mmc_timer.data = (unsigned long) data; + return request_irq(LUBBOCK_SD_IRQ, lubbock_detect_int, + SA_SAMPLE_RANDOM, "lubbock-sd-detect", data); +} + +static int lubbock_mci_get_ro(struct device *dev) +{ + return (LUB_MISC_RD & (1 << 2)) != 0; +} + +static void lubbock_mci_exit(struct device *dev, void *data) +{ + free_irq(LUBBOCK_SD_IRQ, data); + del_timer_sync(&mmc_timer); } static struct pxamci_platform_data lubbock_mci_platform_data = { .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .detect_delay = 1, .init = lubbock_mci_init, + .get_ro = lubbock_mci_get_ro, + .exit = lubbock_mci_exit, }; static void lubbock_irda_transceiver_mode(struct device *dev, int mode) diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..4b63dc9eabfe74efd7aad7b6bc2a5e4fb8dd8804 --- /dev/null +++ b/arch/arm/mach-realview/Kconfig @@ -0,0 +1,11 @@ +menu "RealView platform type" + depends on ARCH_REALVIEW + +config MACH_REALVIEW_EB + bool "Support RealView/EB platform" + default n + select ARM_GIC + help + Include support for the ARM(R) RealView Emulation Baseboard platform. + +endmenu diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..8d37ea1605fdc8d08b67c01551c12d32a91bdd66 --- /dev/null +++ b/arch/arm/mach-realview/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the linux kernel. +# + +obj-y := core.o clock.o +obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o diff --git a/arch/arm/mach-realview/Makefile.boot b/arch/arm/mach-realview/Makefile.boot new file mode 100644 index 0000000000000000000000000000000000000000..c7e75acfe6c9b1911a5825c2b3136ad9b719d445 --- /dev/null +++ b/arch/arm/mach-realview/Makefile.boot @@ -0,0 +1,4 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 + diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c new file mode 100644 index 0000000000000000000000000000000000000000..002635c97bb6dcb5c2485332144b4770ad1680fc --- /dev/null +++ b/arch/arm/mach-realview/clock.c @@ -0,0 +1,145 @@ +/* + * linux/arch/arm/mach-realview/clock.c + * + * Copyright (C) 2004 ARM Limited. + * Written by Deep Blue Solutions Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "clock.h" + +static LIST_HEAD(clocks); +static DECLARE_MUTEX(clocks_sem); + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p, *clk = ERR_PTR(-ENOENT); + + down(&clocks_sem); + list_for_each_entry(p, &clocks, node) { + if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) { + clk = p; + break; + } + } + up(&clocks_sem); + + return clk; +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ + module_put(clk->owner); +} +EXPORT_SYMBOL(clk_put); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +int clk_use(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_use); + +void clk_unuse(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_unuse); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + return rate; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret = -EIO; + + if (clk->setvco) { + struct icst307_vco vco; + + vco = icst307_khz_to_vco(clk->params, rate / 1000); + clk->rate = icst307_khz(clk->params, vco) * 1000; + + printk("Clock %s: setting VCO reg params: S=%d R=%d V=%d\n", + clk->name, vco.s, vco.r, vco.v); + + clk->setvco(clk, vco); + ret = 0; + } + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + +/* + * These are fixed clocks. + */ +static struct clk kmi_clk = { + .name = "KMIREFCLK", + .rate = 24000000, +}; + +static struct clk uart_clk = { + .name = "UARTCLK", + .rate = 24000000, +}; + +static struct clk mmci_clk = { + .name = "MCLK", + .rate = 33000000, +}; + +int clk_register(struct clk *clk) +{ + down(&clocks_sem); + list_add(&clk->node, &clocks); + up(&clocks_sem); + return 0; +} +EXPORT_SYMBOL(clk_register); + +void clk_unregister(struct clk *clk) +{ + down(&clocks_sem); + list_del(&clk->node); + up(&clocks_sem); +} +EXPORT_SYMBOL(clk_unregister); + +static int __init clk_init(void) +{ + clk_register(&kmi_clk); + clk_register(&uart_clk); + clk_register(&mmci_clk); + return 0; +} +arch_initcall(clk_init); diff --git a/arch/arm/mach-realview/clock.h b/arch/arm/mach-realview/clock.h new file mode 100644 index 0000000000000000000000000000000000000000..dadba695e181dd18f572d6af6140427195205c54 --- /dev/null +++ b/arch/arm/mach-realview/clock.h @@ -0,0 +1,25 @@ +/* + * linux/arch/arm/mach-realview/clock.h + * + * Copyright (C) 2004 ARM Limited. + * Written by Deep Blue Solutions Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +struct module; +struct icst307_params; + +struct clk { + struct list_head node; + unsigned long rate; + struct module *owner; + const char *name; + const struct icst307_params *params; + void *data; + void (*setvco)(struct clk *, struct icst307_vco vco); +}; + +int clk_register(struct clk *clk); +void clk_unregister(struct clk *clk); diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c new file mode 100644 index 0000000000000000000000000000000000000000..482eb512ebe8a79d0b38d1989b39e68d77ac4add --- /dev/null +++ b/arch/arm/mach-realview/core.c @@ -0,0 +1,605 @@ +/* + * linux/arch/arm/mach-realview/core.c + * + * Copyright (C) 1999 - 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include + +#include "core.h" +#include "clock.h" + +#define REALVIEW_REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET) + +/* + * This is the RealView sched_clock implementation. This has + * a resolution of 41.7ns, and a maximum value of about 179s. + */ +unsigned long long sched_clock(void) +{ + unsigned long long v; + + v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125; + do_div(v, 3); + + return v; +} + + +#define REALVIEW_FLASHCTRL (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET) + +static int realview_flash_init(void) +{ + u32 val; + + val = __raw_readl(REALVIEW_FLASHCTRL); + val &= ~REALVIEW_FLASHPROG_FLVPPEN; + __raw_writel(val, REALVIEW_FLASHCTRL); + + return 0; +} + +static void realview_flash_exit(void) +{ + u32 val; + + val = __raw_readl(REALVIEW_FLASHCTRL); + val &= ~REALVIEW_FLASHPROG_FLVPPEN; + __raw_writel(val, REALVIEW_FLASHCTRL); +} + +static void realview_flash_set_vpp(int on) +{ + u32 val; + + val = __raw_readl(REALVIEW_FLASHCTRL); + if (on) + val |= REALVIEW_FLASHPROG_FLVPPEN; + else + val &= ~REALVIEW_FLASHPROG_FLVPPEN; + __raw_writel(val, REALVIEW_FLASHCTRL); +} + +static struct flash_platform_data realview_flash_data = { + .map_name = "cfi_probe", + .width = 4, + .init = realview_flash_init, + .exit = realview_flash_exit, + .set_vpp = realview_flash_set_vpp, +}; + +static struct resource realview_flash_resource = { + .start = REALVIEW_FLASH_BASE, + .end = REALVIEW_FLASH_BASE + REALVIEW_FLASH_SIZE, + .flags = IORESOURCE_MEM, +}; + +struct platform_device realview_flash_device = { + .name = "armflash", + .id = 0, + .dev = { + .platform_data = &realview_flash_data, + }, + .num_resources = 1, + .resource = &realview_flash_resource, +}; + +static struct resource realview_smc91x_resources[] = { + [0] = { + .start = REALVIEW_ETH_BASE, + .end = REALVIEW_ETH_BASE + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_ETH, + .end = IRQ_ETH, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device realview_smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(realview_smc91x_resources), + .resource = realview_smc91x_resources, +}; + +#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET) + +static unsigned int realview_mmc_status(struct device *dev) +{ + struct amba_device *adev = container_of(dev, struct amba_device, dev); + u32 mask; + + if (adev->res.start == REALVIEW_MMCI0_BASE) + mask = 1; + else + mask = 2; + + return readl(REALVIEW_SYSMCI) & mask; +} + +struct mmc_platform_data realview_mmc0_plat_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .status = realview_mmc_status, +}; + +struct mmc_platform_data realview_mmc1_plat_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .status = realview_mmc_status, +}; + +/* + * Clock handling + */ +static const struct icst307_params realview_oscvco_params = { + .ref = 24000, + .vco_max = 200000, + .vd_min = 4 + 8, + .vd_max = 511 + 8, + .rd_min = 1 + 2, + .rd_max = 127 + 2, +}; + +static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco) +{ + void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET; + void __iomem *sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC1_OFFSET; + u32 val; + + val = readl(sys_osc) & ~0x7ffff; + val |= vco.v | (vco.r << 9) | (vco.s << 16); + + writel(0xa05f, sys_lock); + writel(val, sys_osc); + writel(0, sys_lock); +} + +struct clk realview_clcd_clk = { + .name = "CLCDCLK", + .params = &realview_oscvco_params, + .setvco = realview_oscvco_set, +}; + +/* + * CLCD support. + */ +#define SYS_CLCD_MODE_MASK (3 << 0) +#define SYS_CLCD_MODE_888 (0 << 0) +#define SYS_CLCD_MODE_5551 (1 << 0) +#define SYS_CLCD_MODE_565_RLSB (2 << 0) +#define SYS_CLCD_MODE_565_BLSB (3 << 0) +#define SYS_CLCD_NLCDIOON (1 << 2) +#define SYS_CLCD_VDDPOSSWITCH (1 << 3) +#define SYS_CLCD_PWR3V5SWITCH (1 << 4) +#define SYS_CLCD_ID_MASK (0x1f << 8) +#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8) +#define SYS_CLCD_ID_UNKNOWN_8_4 (0x01 << 8) +#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8) +#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8) +#define SYS_CLCD_ID_VGA (0x1f << 8) + +static struct clcd_panel vga = { + .mode = { + .name = "VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39721, + .left_margin = 40, + .right_margin = 24, + .upper_margin = 32, + .lower_margin = 11, + .hsync_len = 96, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .bpp = 16, +}; + +static struct clcd_panel sanyo_3_8_in = { + .mode = { + .name = "Sanyo QVGA", + .refresh = 116, + .xres = 320, + .yres = 240, + .pixclock = 100000, + .left_margin = 6, + .right_margin = 6, + .upper_margin = 5, + .lower_margin = 5, + .hsync_len = 6, + .vsync_len = 6, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD, + .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .bpp = 16, +}; + +static struct clcd_panel sanyo_2_5_in = { + .mode = { + .name = "Sanyo QVGA Portrait", + .refresh = 116, + .xres = 240, + .yres = 320, + .pixclock = 100000, + .left_margin = 20, + .right_margin = 10, + .upper_margin = 2, + .lower_margin = 2, + .hsync_len = 10, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_IVS | TIM2_IHS | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .bpp = 16, +}; + +static struct clcd_panel epson_2_2_in = { + .mode = { + .name = "Epson QCIF", + .refresh = 390, + .xres = 176, + .yres = 220, + .pixclock = 62500, + .left_margin = 3, + .right_margin = 2, + .upper_margin = 1, + .lower_margin = 0, + .hsync_len = 3, + .vsync_len = 2, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + }, + .width = -1, + .height = -1, + .tim2 = TIM2_BCD | TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .bpp = 16, +}; + +/* + * Detect which LCD panel is connected, and return the appropriate + * clcd_panel structure. Note: we do not have any information on + * the required timings for the 8.4in panel, so we presently assume + * VGA timings. + */ +static struct clcd_panel *realview_clcd_panel(void) +{ + void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; + struct clcd_panel *panel = &vga; + u32 val; + + val = readl(sys_clcd) & SYS_CLCD_ID_MASK; + if (val == SYS_CLCD_ID_SANYO_3_8) + panel = &sanyo_3_8_in; + else if (val == SYS_CLCD_ID_SANYO_2_5) + panel = &sanyo_2_5_in; + else if (val == SYS_CLCD_ID_EPSON_2_2) + panel = &epson_2_2_in; + else if (val == SYS_CLCD_ID_VGA) + panel = &vga; + else { + printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n", + val); + panel = &vga; + } + + return panel; +} + +/* + * Disable all display connectors on the interface module. + */ +static void realview_clcd_disable(struct clcd_fb *fb) +{ + void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; + u32 val; + + val = readl(sys_clcd); + val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; + writel(val, sys_clcd); +} + +/* + * Enable the relevant connector on the interface module. + */ +static void realview_clcd_enable(struct clcd_fb *fb) +{ + void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET; + u32 val; + + val = readl(sys_clcd); + val &= ~SYS_CLCD_MODE_MASK; + + switch (fb->fb.var.green.length) { + case 5: + val |= SYS_CLCD_MODE_5551; + break; + case 6: + val |= SYS_CLCD_MODE_565_RLSB; + break; + case 8: + val |= SYS_CLCD_MODE_888; + break; + } + + /* + * Set the MUX + */ + writel(val, sys_clcd); + + /* + * And now enable the PSUs + */ + val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH; + writel(val, sys_clcd); +} + +static unsigned long framesize = SZ_1M; + +static int realview_clcd_setup(struct clcd_fb *fb) +{ + dma_addr_t dma; + + fb->panel = realview_clcd_panel(); + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, + &dma, GFP_KERNEL); + if (!fb->fb.screen_base) { + printk(KERN_ERR "CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = framesize; + + return 0; +} + +static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, + fb->fb.screen_base, + fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +static void realview_clcd_remove(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} + +struct clcd_board clcd_plat_data = { + .name = "RealView", + .check = clcdfb_check, + .decode = clcdfb_decode, + .disable = realview_clcd_disable, + .enable = realview_clcd_enable, + .setup = realview_clcd_setup, + .mmap = realview_clcd_mmap, + .remove = realview_clcd_remove, +}; + +#ifdef CONFIG_LEDS +#define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET) + +void realview_leds_event(led_event_t ledevt) +{ + unsigned long flags; + u32 val; + + local_irq_save(flags); + val = readl(VA_LEDS_BASE); + + switch (ledevt) { + case led_idle_start: + val = val & ~REALVIEW_SYS_LED0; + break; + + case led_idle_end: + val = val | REALVIEW_SYS_LED0; + break; + + case led_timer: + val = val ^ REALVIEW_SYS_LED1; + break; + + case led_halted: + val = 0; + break; + + default: + break; + } + + writel(val, VA_LEDS_BASE); + local_irq_restore(flags); +} +#endif /* CONFIG_LEDS */ + +/* + * Where is the timer (VA)? + */ +#define TIMER0_VA_BASE __io_address(REALVIEW_TIMER0_1_BASE) +#define TIMER1_VA_BASE (__io_address(REALVIEW_TIMER0_1_BASE) + 0x20) +#define TIMER2_VA_BASE __io_address(REALVIEW_TIMER2_3_BASE) +#define TIMER3_VA_BASE (__io_address(REALVIEW_TIMER2_3_BASE) + 0x20) + +/* + * How long is the timer interval? + */ +#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10) +#if TIMER_INTERVAL >= 0x100000 +#define TIMER_RELOAD (TIMER_INTERVAL >> 8) +#define TIMER_DIVISOR (TIMER_CTRL_DIV256) +#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC) +#elif TIMER_INTERVAL >= 0x10000 +#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */ +#define TIMER_DIVISOR (TIMER_CTRL_DIV16) +#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC) +#else +#define TIMER_RELOAD (TIMER_INTERVAL) +#define TIMER_DIVISOR (TIMER_CTRL_DIV1) +#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC) +#endif + +/* + * Returns number of ms since last clock interrupt. Note that interrupts + * will have been disabled by do_gettimeoffset() + */ +static unsigned long realview_gettimeoffset(void) +{ + unsigned long ticks1, ticks2, status; + + /* + * Get the current number of ticks. Note that there is a race + * condition between us reading the timer and checking for + * an interrupt. We get around this by ensuring that the + * counter has not reloaded between our two reads. + */ + ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff; + do { + ticks1 = ticks2; + status = __raw_readl(__io_address(REALVIEW_GIC_DIST_BASE + GIC_DIST_PENDING_SET) + + ((IRQ_TIMERINT0_1 >> 5) << 2)); + ticks2 = readl(TIMER0_VA_BASE + TIMER_VALUE) & 0xffff; + } while (ticks2 > ticks1); + + /* + * Number of ticks since last interrupt. + */ + ticks1 = TIMER_RELOAD - ticks2; + + /* + * Interrupt pending? If so, we've reloaded once already. + * + * FIXME: Need to check this is effectively timer 0 that expires + */ + if (status & IRQMASK_TIMERINT0_1) + ticks1 += TIMER_RELOAD; + + /* + * Convert the ticks to usecs + */ + return TICKS2USECS(ticks1); +} + +/* + * IRQ handler for the timer + */ +static irqreturn_t realview_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + write_seqlock(&xtime_lock); + + // ...clear the interrupt + writel(1, TIMER0_VA_BASE + TIMER_INTCLR); + + timer_tick(regs); + + write_sequnlock(&xtime_lock); + + return IRQ_HANDLED; +} + +static struct irqaction realview_timer_irq = { + .name = "RealView Timer Tick", + .flags = SA_INTERRUPT | SA_TIMER, + .handler = realview_timer_interrupt, +}; + +/* + * Set up timer interrupt, and return the current time in seconds. + */ +static void __init realview_timer_init(void) +{ + u32 val; + + /* + * set clock frequency: + * REALVIEW_REFCLK is 32KHz + * REALVIEW_TIMCLK is 1MHz + */ + val = readl(__io_address(REALVIEW_SCTL_BASE)); + writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) | + (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) | + (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) | + (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val, + __io_address(REALVIEW_SCTL_BASE)); + + /* + * Initialise to a known state (all timers off) + */ + writel(0, TIMER0_VA_BASE + TIMER_CTRL); + writel(0, TIMER1_VA_BASE + TIMER_CTRL); + writel(0, TIMER2_VA_BASE + TIMER_CTRL); + writel(0, TIMER3_VA_BASE + TIMER_CTRL); + + writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD); + writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_VALUE); + writel(TIMER_DIVISOR | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC | + TIMER_CTRL_IE, TIMER0_VA_BASE + TIMER_CTRL); + + /* + * Make irqs happen for the system timer + */ + setup_irq(IRQ_TIMERINT0_1, &realview_timer_irq); +} + +struct sys_timer realview_timer = { + .init = realview_timer_init, + .offset = realview_gettimeoffset, +}; diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h new file mode 100644 index 0000000000000000000000000000000000000000..575599db74dbe0d120518266981a4177fe3d0d65 --- /dev/null +++ b/arch/arm/mach-realview/core.h @@ -0,0 +1,118 @@ +/* + * linux/arch/arm/mach-realview/core.h + * + * Copyright (C) 2004 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_REALVIEW_H +#define __ASM_ARCH_REALVIEW_H + +#include +#include + +#define __io_address(n) __io(IO_ADDRESS(n)) + +extern struct sys_timer realview_timer; + +#define AMBA_DEVICE(name,busid,base,plat) \ +static struct amba_device name##_device = { \ + .dev = { \ + .coherent_dma_mask = ~0, \ + .bus_id = busid, \ + .platform_data = plat, \ + }, \ + .res = { \ + .start = REALVIEW_##base##_BASE, \ + .end = (REALVIEW_##base##_BASE) + SZ_4K - 1,\ + .flags = IORESOURCE_MEM, \ + }, \ + .dma_mask = ~0, \ + .irq = base##_IRQ, \ + /* .dma = base##_DMA,*/ \ +} + +/* + * These devices are connected via the core APB bridge + */ +#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ } +#define GPIO2_DMA { 0, 0 } +#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ } +#define GPIO3_DMA { 0, 0 } + +#define AACI_IRQ { IRQ_AACI, NO_IRQ } +#define AACI_DMA { 0x80, 0x81 } +#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_MMCI0B } +#define MMCI0_DMA { 0x84, 0 } +#define KMI0_IRQ { IRQ_KMI0, NO_IRQ } +#define KMI0_DMA { 0, 0 } +#define KMI1_IRQ { IRQ_KMI1, NO_IRQ } +#define KMI1_DMA { 0, 0 } + +/* + * These devices are connected directly to the multi-layer AHB switch + */ +#define SMC_IRQ { NO_IRQ, NO_IRQ } +#define SMC_DMA { 0, 0 } +#define MPMC_IRQ { NO_IRQ, NO_IRQ } +#define MPMC_DMA { 0, 0 } +#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ } +#define CLCD_DMA { 0, 0 } +#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ } +#define DMAC_DMA { 0, 0 } + +/* + * These devices are connected via the core APB bridge + */ +#define SCTL_IRQ { NO_IRQ, NO_IRQ } +#define SCTL_DMA { 0, 0 } +#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ } +#define WATCHDOG_DMA { 0, 0 } +#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ } +#define GPIO0_DMA { 0, 0 } +#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ } +#define GPIO1_DMA { 0, 0 } +#define RTC_IRQ { IRQ_RTCINT, NO_IRQ } +#define RTC_DMA { 0, 0 } + +/* + * These devices are connected via the DMA APB bridge + */ +#define SCI_IRQ { IRQ_SCIINT, NO_IRQ } +#define SCI_DMA { 7, 6 } +#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ } +#define UART0_DMA { 15, 14 } +#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ } +#define UART1_DMA { 13, 12 } +#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ } +#define UART2_DMA { 11, 10 } +#define UART3_IRQ { IRQ_UART3, NO_IRQ } +#define UART3_DMA { 0x86, 0x87 } +#define SSP_IRQ { IRQ_SSPINT, NO_IRQ } +#define SSP_DMA { 9, 8 } + + +extern struct platform_device realview_flash_device; +extern struct platform_device realview_smc91x_device; +extern struct mmc_platform_data realview_mmc0_plat_data; +extern struct mmc_platform_data realview_mmc1_plat_data; +extern struct clk realview_clcd_clk; +extern struct clcd_board clcd_plat_data; + +extern void realview_leds_event(led_event_t ledevt); + +#endif diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c new file mode 100644 index 0000000000000000000000000000000000000000..01b264be5029a85f061158d57dbe817cf09196f4 --- /dev/null +++ b/arch/arm/mach-realview/realview_eb.c @@ -0,0 +1,142 @@ +/* + * linux/arch/arm/mach-realview/realview_eb.c + * + * Copyright (C) 2004 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#include "core.h" +#include "clock.h" + +static struct map_desc realview_eb_io_desc[] __initdata = { + { IO_ADDRESS(REALVIEW_SYS_BASE), REALVIEW_SYS_BASE, SZ_4K, MT_DEVICE }, + { IO_ADDRESS(REALVIEW_GIC_CPU_BASE), REALVIEW_GIC_CPU_BASE, SZ_4K, MT_DEVICE }, + { IO_ADDRESS(REALVIEW_GIC_DIST_BASE), REALVIEW_GIC_DIST_BASE, SZ_4K, MT_DEVICE }, + { IO_ADDRESS(REALVIEW_SCTL_BASE), REALVIEW_SCTL_BASE, SZ_4K, MT_DEVICE }, + { IO_ADDRESS(REALVIEW_TIMER0_1_BASE), REALVIEW_TIMER0_1_BASE, SZ_4K, MT_DEVICE }, + { IO_ADDRESS(REALVIEW_TIMER2_3_BASE), REALVIEW_TIMER2_3_BASE, SZ_4K, MT_DEVICE }, +#ifdef CONFIG_DEBUG_LL + { IO_ADDRESS(REALVIEW_UART0_BASE), REALVIEW_UART0_BASE, SZ_4K, MT_DEVICE }, +#endif +}; + +static void __init realview_eb_map_io(void) +{ + iotable_init(realview_eb_io_desc, ARRAY_SIZE(realview_eb_io_desc)); +} + +/* FPGA Primecells */ +AMBA_DEVICE(aaci, "fpga:04", AACI, NULL); +AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data); +AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL); +AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL); +AMBA_DEVICE(uart3, "fpga:09", UART3, NULL); + +/* DevChip Primecells */ +AMBA_DEVICE(smc, "dev:00", SMC, NULL); +AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data); +AMBA_DEVICE(dmac, "dev:30", DMAC, NULL); +AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL); +AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL); +AMBA_DEVICE(gpio0, "dev:e4", GPIO0, NULL); +AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL); +AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL); +AMBA_DEVICE(rtc, "dev:e8", RTC, NULL); +AMBA_DEVICE(sci0, "dev:f0", SCI, NULL); +AMBA_DEVICE(uart0, "dev:f1", UART0, NULL); +AMBA_DEVICE(uart1, "dev:f2", UART1, NULL); +AMBA_DEVICE(uart2, "dev:f3", UART2, NULL); +AMBA_DEVICE(ssp0, "dev:f4", SSP, NULL); + +static struct amba_device *amba_devs[] __initdata = { + &dmac_device, + &uart0_device, + &uart1_device, + &uart2_device, + &uart3_device, + &smc_device, + &clcd_device, + &sctl_device, + &wdog_device, + &gpio0_device, + &gpio1_device, + &gpio2_device, + &rtc_device, + &sci0_device, + &ssp0_device, + &aaci_device, + &mmc0_device, + &kmi0_device, + &kmi1_device, +}; + +static void __init gic_init_irq(void) +{ + gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE)); + gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE)); +} + +static void __init realview_eb_init(void) +{ + int i; + + clk_register(&realview_clcd_clk); + + platform_device_register(&realview_flash_device); + platform_device_register(&realview_smc91x_device); + + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + +#ifdef CONFIG_LEDS + leds_event = realview_leds_event; +#endif +} + +MACHINE_START(REALVIEW_EB, "ARM-RealView EB") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0x00000000, + .phys_io = REALVIEW_UART0_BASE, + .io_pg_offst = (IO_ADDRESS(REALVIEW_UART0_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = realview_eb_map_io, + .init_irq = gic_init_irq, + .timer = &realview_timer, + .init_machine = realview_eb_init, +MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c index 8f2a90bf940bc5178ca40e419bef665ea58cda64..24d69019a843d3401d1adb9ec90836a3f4965bdf 100644 --- a/arch/arm/mach-s3c2410/mach-rx3715.c +++ b/arch/arm/mach-s3c2410/mach-rx3715.c @@ -17,6 +17,7 @@ * 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA * 14-Mar-2005 BJD Fixed __iomem warnings * 20-Sep-2005 BJD Added static to non-exported items + * 31-Oct-2005 BJD Added LCD setup for framebuffer */ #include @@ -43,6 +44,9 @@ #include #include +#include + +#include #include "clock.h" #include "devs.h" @@ -97,6 +101,66 @@ static struct s3c2410_uartcfg rx3715_uartcfgs[] = { } }; +/* framebuffer lcd controller information */ + +static struct s3c2410fb_mach_info rx3715_lcdcfg __initdata = { + .regs = { + .lcdcon1 = S3C2410_LCDCON1_TFT16BPP | \ + S3C2410_LCDCON1_TFT | \ + S3C2410_LCDCON1_CLKVAL(0x0C), + + .lcdcon2 = S3C2410_LCDCON2_VBPD(5) | \ + S3C2410_LCDCON2_LINEVAL(319) | \ + S3C2410_LCDCON2_VFPD(6) | \ + S3C2410_LCDCON2_VSPW(2), + + .lcdcon3 = S3C2410_LCDCON3_HBPD(35) | \ + S3C2410_LCDCON3_HOZVAL(239) | \ + S3C2410_LCDCON3_HFPD(35), + + .lcdcon4 = S3C2410_LCDCON4_MVAL(0) | \ + S3C2410_LCDCON4_HSPW(7), + + .lcdcon5 = S3C2410_LCDCON5_INVVLINE | + S3C2410_LCDCON5_FRM565 | + S3C2410_LCDCON5_HWSWP, + }, + + .lpcsel = 0xf82, + + .gpccon = 0xaa955699, + .gpccon_mask = 0xffc003cc, + .gpcup = 0x0000ffff, + .gpcup_mask = 0xffffffff, + + .gpdcon = 0xaa95aaa1, + .gpdcon_mask = 0xffc0fff0, + .gpdup = 0x0000faff, + .gpdup_mask = 0xffffffff, + + .fixed_syncs = 1, + .width = 240, + .height = 320, + + .xres = { + .min = 240, + .max = 240, + .defval = 240, + }, + + .yres = { + .max = 320, + .min = 320, + .defval = 320, + }, + + .bpp = { + .min = 16, + .max = 16, + .defval = 16, + }, +}; + static struct platform_device *rx3715_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, @@ -123,14 +187,12 @@ static void __init rx3715_init_irq(void) s3c24xx_init_irq(); } -#ifdef CONFIG_PM static void __init rx3715_init_machine(void) { s3c2410_pm_init(); + s3c24xx_fb_set_platdata(&rx3715_lcdcfg); } -#else -#define rx3715_init_machine NULL -#endif + MACHINE_START(RX3715, "IPAQ-RX3715") /* Maintainer: Ben Dooks */ diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c54e04c995eedab8884ac688922e7065153d4099..5568403e984df005941f043495ebe5af4a518c5b 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -120,8 +120,8 @@ config CPU_ARM925T # ARM926T config CPU_ARM926T - bool "Support ARM926T processor" if ARCH_INTEGRATOR - depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX + bool "Support ARM926T processor" + depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX select CPU_32v5 select CPU_ABRT_EV5TJ @@ -242,7 +242,7 @@ config CPU_XSCALE # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB select CPU_32v6 select CPU_ABRT_EV6 select CPU_CACHE_V6 diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 13752bcb2afdb04fcfd143663e3d73bac2e88ebd..cfae4ad00faee2bb6ca81b1ed34a7c71f1c66126 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -11,7 +11,7 @@ * * Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund * - * And which acknowledged Kyösti Mälkki , + * And which acknowledged Kyösti Mälkki , * Frodo Looijaard , Martin Bailey * * Major cleanup by Deepak Saxena , 01/2005: @@ -184,7 +184,7 @@ iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap, do { interrupted = wait_event_interruptible_timeout ( iop3xx_adap->waitq, - (done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )), + (done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )), 1 * HZ; ); if ((rc = iop3xx_i2c_error(sr)) < 0) { @@ -472,9 +472,10 @@ iop3xx_i2c_probe(struct device *dev) goto release_region; } - res = request_irq(platform_get_irq(pdev, 0), iop3xx_i2c_irq_handler, 0, + ret = request_irq(platform_get_irq(pdev, 0), iop3xx_i2c_irq_handler, 0, pdev->name, adapter_data); - if (res) { + + if (ret) { ret = -EIO; goto unmap; } diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index 3d50e953faaabafd06bea37698e38924b7cb1978..877891a29aaac297fcf88542c8ea6159d97f1377 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c @@ -26,11 +26,11 @@ #include #include #include +#include -#include -#include #include #include +#include #define TX_BUFFERS 15 #define RX_BUFFERS 25 @@ -280,10 +280,13 @@ static void am79c961_timer(unsigned long data) lnkstat = read_ireg(dev->base_addr, ISALED0) & ISALED0_LNKST; carrier = netif_carrier_ok(dev); - if (lnkstat && !carrier) + if (lnkstat && !carrier) { netif_carrier_on(dev); - else if (!lnkstat && carrier) + printk("%s: link up\n", dev->name); + } else if (!lnkstat && carrier) { netif_carrier_off(dev); + printk("%s: link down\n", dev->name); + } mod_timer(&priv->timer, jiffies + msecs_to_jiffies(500)); } @@ -665,17 +668,25 @@ static void __init am79c961_banner(void) printk(KERN_INFO "%s", version); } -static int __init am79c961_init(void) +static int __init am79c961_probe(struct device *_dev) { + struct platform_device *pdev = to_platform_device(_dev); + struct resource *res; struct net_device *dev; struct dev_priv *priv; int i, ret; + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!res) + return -ENODEV; + dev = alloc_etherdev(sizeof(struct dev_priv)); ret = -ENOMEM; if (!dev) goto out; + SET_NETDEV_DEV(dev, &pdev->dev); + priv = netdev_priv(dev); /* @@ -683,8 +694,8 @@ static int __init am79c961_init(void) * The PNP initialisation should have been * done by the ether bootp loader. */ - dev->base_addr = 0x220; - dev->irq = IRQ_EBSA110_ETHERNET; + dev->base_addr = res->start; + dev->irq = platform_get_irq(pdev, 0); ret = -ENODEV; if (!request_region(dev->base_addr, 0x18, dev->name)) @@ -705,11 +716,11 @@ static int __init am79c961_init(void) inb(dev->base_addr + 4) != 0x2b) goto release; - am79c961_banner(); - for (i = 0; i < 6; i++) dev->dev_addr[i] = inb(dev->base_addr + i * 2) & 0xff; + am79c961_banner(); + spin_lock_init(&priv->chip_lock); init_timer(&priv->timer); priv->timer.data = (unsigned long)dev; @@ -732,6 +743,7 @@ static int __init am79c961_init(void) if (ret == 0) { printk(KERN_INFO "%s: ether address ", dev->name); + /* Retrive and print the ethernet address. */ for (i = 0; i < 6; i++) printk (i == 5 ? "%02x\n" : "%02x:", dev->dev_addr[i]); @@ -746,4 +758,15 @@ static int __init am79c961_init(void) return ret; } +static struct device_driver am79c961_driver = { + .name = "am79c961", + .bus = &platform_bus_type, + .probe = am79c961_probe, +}; + +static int __init am79c961_init(void) +{ + return driver_register(&am79c961_driver); +} + __initcall(am79c961_init); diff --git a/drivers/net/arm/am79c961a.h b/drivers/net/arm/am79c961a.h index 1e9b05050cbe90d4c8dbb4b1f6c3cebde80bbb51..6a49ac7f6d466735e4a4f5f19db36afa910acb8a 100644 --- a/drivers/net/arm/am79c961a.h +++ b/drivers/net/arm/am79c961a.h @@ -143,6 +143,4 @@ struct dev_priv { struct timer_list timer; }; -extern int am79c961_probe (struct net_device *dev); - #endif diff --git a/include/asm-arm/arch-ixp2000/enp2611.h b/include/asm-arm/arch-ixp2000/enp2611.h index 31ae886749688bed4bb4dd29c6fc640172404735..95128d9f5026707338946d134126c51333b47dab 100644 --- a/include/asm-arm/arch-ixp2000/enp2611.h +++ b/include/asm-arm/arch-ixp2000/enp2611.h @@ -21,8 +21,20 @@ #ifndef __ENP2611_H #define __ENP2611_H -#define ENP2611_GPIO_SCL 0x07 -#define ENP2611_GPIO_SDA 0x06 +#define ENP2611_CALEB_PHYS_BASE 0xc5000000 +#define ENP2611_CALEB_VIRT_BASE 0xfe000000 +#define ENP2611_CALEB_SIZE 0x00100000 + +#define ENP2611_PM3386_0_PHYS_BASE 0xc6000000 +#define ENP2611_PM3386_0_VIRT_BASE 0xfe100000 +#define ENP2611_PM3386_0_SIZE 0x00100000 + +#define ENP2611_PM3386_1_PHYS_BASE 0xc6400000 +#define ENP2611_PM3386_1_VIRT_BASE 0xfe200000 +#define ENP2611_PM3386_1_SIZE 0x00100000 + +#define ENP2611_GPIO_SCL 7 +#define ENP2611_GPIO_SDA 6 #endif diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h index def089d693d2534bbee460abe0ac3275b9a9c53e..fc5ac6aec4f21d5e703dad12801bc981de74d2bd 100644 --- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h +++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h @@ -59,14 +59,15 @@ #define IXP2000_CAP_SIZE 0x00100000 /* - * Addresses for specific on-chip peripherals + * Addresses for specific on-chip peripherals. */ #define IXP2000_SLOWPORT_CSR_VIRT_BASE 0xfef80000 #define IXP2000_GLOBAL_REG_VIRT_BASE 0xfef04000 #define IXP2000_UART_PHYS_BASE 0xc0030000 #define IXP2000_UART_VIRT_BASE 0xfef30000 #define IXP2000_TIMER_VIRT_BASE 0xfef20000 -#define IXP2000_GPIO_VIRT_BASE 0Xfef10000 +#define IXP2000_UENGINE_CSR_VIRT_BASE 0xfef18000 +#define IXP2000_GPIO_VIRT_BASE 0xfef10000 /* * Devices outside of the 0xc0000000 -> 0xc0100000 range. The virtual @@ -252,7 +253,7 @@ #define IXP2000_PCI_XSCALE_INT_ENABLE IXP2000_PCI_CSR(0x15C) #define IXP2000_PCICNTL_PNR (1<<17) /* PCI not Reset bit of PCI_CONTROL */ -#define IXP2000_PCICNTL_PCF (1<<28) /* PCI Centrolfunction bit */ +#define IXP2000_PCICNTL_PCF (1<<28) /* PCI Central function bit */ #define IXP2000_XSCALE_INT (1<<1) /* Interrupt from XScale to PCI */ /* These are from the IRQ register in the PCI ISR register */ diff --git a/include/asm-arm/arch-ixp2000/system.h b/include/asm-arm/arch-ixp2000/system.h index 4f489cc0dfa5356942910d0980ffce25d6ec0bc9..ddbbb34b5f95e80757c42359bc13a3ac363062db 100644 --- a/include/asm-arm/arch-ixp2000/system.h +++ b/include/asm-arm/arch-ixp2000/system.h @@ -26,29 +26,24 @@ static inline void arch_reset(char mode) * RedBoot bank. */ if (machine_is_ixdp2401()) { - *IXDP2X01_CPLD_FLASH_REG = ((0 >> IXDP2X01_FLASH_WINDOW_BITS) - | IXDP2X01_CPLD_FLASH_INTERN); - *IXDP2X01_CPLD_RESET_REG = 0xffffffff; + ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG, + ((0 >> IXDP2X01_FLASH_WINDOW_BITS) + | IXDP2X01_CPLD_FLASH_INTERN)); + ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff); } /* * On IXDP2801 we need to write this magic sequence to the CPLD * to cause a complete reset of the CPU and all external devices - * and moves the flash bank register back to 0. + * and move the flash bank register back to 0. */ if (machine_is_ixdp2801()) { unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG; + reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF); - *IXDP2X01_CPLD_RESET_REG = reset_reg; - mb(); - *IXDP2X01_CPLD_RESET_REG = 0x80000000; + ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg); + ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000); } - /* - * We do a reset all if we are PCI master. We could be a slave and we - * don't want to do anything funky on the PCI bus. - */ - if (*IXP2000_STRAP_OPTIONS & CFG_PCI_BOOT_HOST) { - *(IXP2000_RESET0) |= (RSTALL); - } + ixp2000_reg_wrb(IXP2000_RESET0, RSTALL); } diff --git a/include/asm-arm/arch-ixp2000/uengine.h b/include/asm-arm/arch-ixp2000/uengine.h new file mode 100644 index 0000000000000000000000000000000000000000..b442d65c659313e02dd33ef124e9c9c6d5b47858 --- /dev/null +++ b/include/asm-arm/arch-ixp2000/uengine.h @@ -0,0 +1,62 @@ +/* + * Generic library functions for the microengines found on the Intel + * IXP2000 series of network processors. + * + * Copyright (C) 2004, 2005 Lennert Buytenhek + * Dedicated to Marija Kulikova. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of the + * License, or (at your option) any later version. + */ + +#ifndef __IXP2000_UENGINE_H +#define __IXP2000_UENGINE_H + +extern u32 ixp2000_uengine_mask; + +struct ixp2000_uengine_code +{ + u32 cpu_model_bitmask; + u8 cpu_min_revision; + u8 cpu_max_revision; + + u32 uengine_parameters; + + struct ixp2000_reg_value { + int reg; + u32 value; + } *initial_reg_values; + + int num_insns; + u8 *insns; +}; + +u32 ixp2000_uengine_csr_read(int uengine, int offset); +void ixp2000_uengine_csr_write(int uengine, int offset, u32 value); +void ixp2000_uengine_reset(u32 uengine_mask); +void ixp2000_uengine_set_mode(int uengine, u32 mode); +void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns); +void ixp2000_uengine_init_context(int uengine, int context, int pc); +void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask); +void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask); +int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c); + +#define IXP2000_UENGINE_8_CONTEXTS 0x00000000 +#define IXP2000_UENGINE_4_CONTEXTS 0x80000000 +#define IXP2000_UENGINE_PRN_UPDATE_EVERY 0x40000000 +#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS 0x00000000 +#define IXP2000_UENGINE_NN_FROM_SELF 0x00100000 +#define IXP2000_UENGINE_NN_FROM_PREVIOUS 0x00000000 +#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3 0x000c0000 +#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2 0x00080000 +#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1 0x00040000 +#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0 0x00000000 +#define IXP2000_UENGINE_LM_ADDR1_GLOBAL 0x00020000 +#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT 0x00000000 +#define IXP2000_UENGINE_LM_ADDR0_GLOBAL 0x00010000 +#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT 0x00000000 + + +#endif diff --git a/include/asm-arm/arch-realview/debug-macro.S b/include/asm-arm/arch-realview/debug-macro.S new file mode 100644 index 0000000000000000000000000000000000000000..ed28bd012236252abd398a38b058685c79580749 --- /dev/null +++ b/include/asm-arm/arch-realview/debug-macro.S @@ -0,0 +1,38 @@ +/* linux/include/asm-arm/arch-realview/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include + + .macro addruart,rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0x10000000 + movne \rx, #0xf1000000 @ virtual base + orr \rx, \rx, #0x00009000 + .endm + + .macro senduart,rd,rx + strb \rd, [\rx, #UART01x_DR] + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #0x18] @ UARTFLG + tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full + bne 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #0x18] @ UARTFLG + tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy + bne 1001b + .endm diff --git a/include/asm-arm/arch-realview/dma.h b/include/asm-arm/arch-realview/dma.h new file mode 100644 index 0000000000000000000000000000000000000000..744491a74bd9c592188935dabaf2e3f773ed3f28 --- /dev/null +++ b/include/asm-arm/arch-realview/dma.h @@ -0,0 +1,27 @@ +/* + * linux/include/asm-arm/arch-realview/dma.h + * + * Copyright (C) 2003 ARM Limited. + * Copyright (C) 1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +#define MAX_DMA_ADDRESS 0xffffffff +#define MAX_DMA_CHANNELS 0 + +#endif /* _ASM_ARCH_DMA_H */ diff --git a/include/asm-arm/arch-realview/entry-macro.S b/include/asm-arm/arch-realview/entry-macro.S new file mode 100644 index 0000000000000000000000000000000000000000..2712ba77bb3a6db51f729e0d0aa33f2f43498e51 --- /dev/null +++ b/include/asm-arm/arch-realview/entry-macro.S @@ -0,0 +1,49 @@ +/* + * include/asm-arm/arch-realview/entry-macro.S + * + * Low-level IRQ helper macros for RealView platforms + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include + + .macro disable_fiq + .endm + + /* + * The interrupt numbering scheme is defined in the + * interrupt controller spec. To wit: + * + * Interrupts 0-15 are IPI + * 16-28 are reserved + * 29-31 are local. We allow 30 to be used for the watchdog. + * 32-1020 are global + * 1021-1022 are reserved + * 1023 is "spurious" (no interrupt) + * + * For now, we ignore all local interrupts so only return an interrupt if it's + * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. + * + * A simple read from the controller will tell us the number of the highest + * priority enabled interrupt. We then just need to check whether it is in the + * valid range for an IRQ (30-1020 inclusive). + */ + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + ldr \base, =IO_ADDRESS(REALVIEW_GIC_CPU_BASE) + ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ + + ldr \tmp, =1021 + + bic \irqnr, \irqstat, #0x1c00 + + cmp \irqnr, #29 + cmpcc \irqnr, \irqnr + cmpne \irqnr, \tmp + cmpcs \irqnr, \irqnr + + .endm diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h new file mode 100644 index 0000000000000000000000000000000000000000..67879cdb6ef2a21ac9b810293e28bd6ca6b094e4 --- /dev/null +++ b/include/asm-arm/arch-realview/hardware.h @@ -0,0 +1,31 @@ +/* + * linux/include/asm-arm/arch-realview/hardware.h + * + * This file contains the hardware definitions of the RealView boards. + * + * Copyright (C) 2003 ARM Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +#include +#include + +/* macro to get at IO space when running virtually */ +#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) + +#endif diff --git a/include/asm-arm/arch-realview/io.h b/include/asm-arm/arch-realview/io.h new file mode 100644 index 0000000000000000000000000000000000000000..d444a68ac33065cae4d710ff1971fe20a051741a --- /dev/null +++ b/include/asm-arm/arch-realview/io.h @@ -0,0 +1,34 @@ +/* + * linux/include/asm-arm/arch-realview/io.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define IO_SPACE_LIMIT 0xffffffff + +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)addr; +} + +#define __io(a) __io(a) +#define __mem_pci(a) (a) +#define __mem_isa(a) (a) + +#endif diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h new file mode 100644 index 0000000000000000000000000000000000000000..ff376494e5b1d2f60de5481258c5e6211c34ae77 --- /dev/null +++ b/include/asm-arm/arch-realview/irqs.h @@ -0,0 +1,103 @@ +/* + * linux/include/asm-arm/arch-realview/irqs.h + * + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include + +/* + * IRQ interrupts definitions are the same the INT definitions + * held within platform.h + */ +#define IRQ_GIC_START 32 +#define IRQ_WDOGINT (IRQ_GIC_START + INT_WDOGINT) +#define IRQ_SOFTINT (IRQ_GIC_START + INT_SOFTINT) +#define IRQ_COMMRx (IRQ_GIC_START + INT_COMMRx) +#define IRQ_COMMTx (IRQ_GIC_START + INT_COMMTx) +#define IRQ_TIMERINT0_1 (IRQ_GIC_START + INT_TIMERINT0_1) +#define IRQ_TIMERINT2_3 (IRQ_GIC_START + INT_TIMERINT2_3) +#define IRQ_GPIOINT0 (IRQ_GIC_START + INT_GPIOINT0) +#define IRQ_GPIOINT1 (IRQ_GIC_START + INT_GPIOINT1) +#define IRQ_GPIOINT2 (IRQ_GIC_START + INT_GPIOINT2) +#define IRQ_GPIOINT3 (IRQ_GIC_START + INT_GPIOINT3) +#define IRQ_RTCINT (IRQ_GIC_START + INT_RTCINT) +#define IRQ_SSPINT (IRQ_GIC_START + INT_SSPINT) +#define IRQ_UARTINT0 (IRQ_GIC_START + INT_UARTINT0) +#define IRQ_UARTINT1 (IRQ_GIC_START + INT_UARTINT1) +#define IRQ_UARTINT2 (IRQ_GIC_START + INT_UARTINT2) +#define IRQ_UART3 (IRQ_GIC_START + INT_UARTINT3) +#define IRQ_SCIINT (IRQ_GIC_START + INT_SCIINT) +#define IRQ_CLCDINT (IRQ_GIC_START + INT_CLCDINT) +#define IRQ_DMAINT (IRQ_GIC_START + INT_DMAINT) +#define IRQ_PWRFAILINT (IRQ_GIC_START + INT_PWRFAILINT) +#define IRQ_MBXINT (IRQ_GIC_START + INT_MBXINT) +#define IRQ_GNDINT (IRQ_GIC_START + INT_GNDINT) +#define IRQ_MMCI0B (IRQ_GIC_START + INT_MMCI0B) +#define IRQ_MMCI1B (IRQ_GIC_START + INT_MMCI1B) +#define IRQ_KMI0 (IRQ_GIC_START + INT_KMI0) +#define IRQ_KMI1 (IRQ_GIC_START + INT_KMI1) +#define IRQ_SCI3 (IRQ_GIC_START + INT_SCI3) +#define IRQ_CLCD (IRQ_GIC_START + INT_CLCD) +#define IRQ_TOUCH (IRQ_GIC_START + INT_TOUCH) +#define IRQ_KEYPAD (IRQ_GIC_START + INT_KEYPAD) +#define IRQ_DoC (IRQ_GIC_START + INT_DoC) +#define IRQ_MMCI0A (IRQ_GIC_START + INT_MMCI0A) +#define IRQ_MMCI1A (IRQ_GIC_START + INT_MMCI1A) +#define IRQ_AACI (IRQ_GIC_START + INT_AACI) +#define IRQ_ETH (IRQ_GIC_START + INT_ETH) +#define IRQ_USB (IRQ_GIC_START + INT_USB) + +#define IRQMASK_WDOGINT INTMASK_WDOGINT +#define IRQMASK_SOFTINT INTMASK_SOFTINT +#define IRQMASK_COMMRx INTMASK_COMMRx +#define IRQMASK_COMMTx INTMASK_COMMTx +#define IRQMASK_TIMERINT0_1 INTMASK_TIMERINT0_1 +#define IRQMASK_TIMERINT2_3 INTMASK_TIMERINT2_3 +#define IRQMASK_GPIOINT0 INTMASK_GPIOINT0 +#define IRQMASK_GPIOINT1 INTMASK_GPIOINT1 +#define IRQMASK_GPIOINT2 INTMASK_GPIOINT2 +#define IRQMASK_GPIOINT3 INTMASK_GPIOINT3 +#define IRQMASK_RTCINT INTMASK_RTCINT +#define IRQMASK_SSPINT INTMASK_SSPINT +#define IRQMASK_UARTINT0 INTMASK_UARTINT0 +#define IRQMASK_UARTINT1 INTMASK_UARTINT1 +#define IRQMASK_UARTINT2 INTMASK_UARTINT2 +#define IRQMASK_SCIINT INTMASK_SCIINT +#define IRQMASK_CLCDINT INTMASK_CLCDINT +#define IRQMASK_DMAINT INTMASK_DMAINT +#define IRQMASK_PWRFAILINT INTMASK_PWRFAILINT +#define IRQMASK_MBXINT INTMASK_MBXINT +#define IRQMASK_GNDINT INTMASK_GNDINT +#define IRQMASK_MMCI0B INTMASK_MMCI0B +#define IRQMASK_MMCI1B INTMASK_MMCI1B +#define IRQMASK_KMI0 INTMASK_KMI0 +#define IRQMASK_KMI1 INTMASK_KMI1 +#define IRQMASK_SCI3 INTMASK_SCI3 +#define IRQMASK_UART3 INTMASK_UART3 +#define IRQMASK_CLCD INTMASK_CLCD +#define IRQMASK_TOUCH INTMASK_TOUCH +#define IRQMASK_KEYPAD INTMASK_KEYPAD +#define IRQMASK_DoC INTMASK_DoC +#define IRQMASK_MMCI0A INTMASK_MMCI0A +#define IRQMASK_MMCI1A INTMASK_MMCI1A +#define IRQMASK_AACI INTMASK_AACI +#define IRQMASK_ETH INTMASK_ETH +#define IRQMASK_USB INTMASK_USB + +#define NR_IRQS (IRQ_GIC_START + 64) diff --git a/include/asm-arm/arch-realview/memory.h b/include/asm-arm/arch-realview/memory.h new file mode 100644 index 0000000000000000000000000000000000000000..99667d5cc61706cf710ad49c93d7c4a8c02a038b --- /dev/null +++ b/include/asm-arm/arch-realview/memory.h @@ -0,0 +1,38 @@ +/* + * linux/include/asm-arm/arch-realview/memory.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +/* + * Physical DRAM offset. + */ +#define PHYS_OFFSET (0x00000000UL) + +/* + * Virtual view <-> DMA view memory address translations + * virt_to_bus: Used to translate the virtual address to an + * address suitable to be passed to set_dma_addr + * bus_to_virt: Used to convert an address for DMA operations + * to an address that the kernel can use. + */ +#define __virt_to_bus(x) ((x) - PAGE_OFFSET) +#define __bus_to_virt(x) ((x) + PAGE_OFFSET) + +#endif diff --git a/include/asm-arm/arch-realview/param.h b/include/asm-arm/arch-realview/param.h new file mode 100644 index 0000000000000000000000000000000000000000..89b1235d32bdd1a6029ce5a505f5fb714011aa22 --- /dev/null +++ b/include/asm-arm/arch-realview/param.h @@ -0,0 +1,19 @@ +/* + * linux/include/asm-arm/arch-realview/param.h + * + * Copyright (C) 2002 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h new file mode 100644 index 0000000000000000000000000000000000000000..4b6de13a6b9a91cca202441ff41f08e83d2b9088 --- /dev/null +++ b/include/asm-arm/arch-realview/platform.h @@ -0,0 +1,395 @@ +/* + * linux/include/asm-arm/arch-realview/platform.h + * + * Copyright (c) ARM Limited 2003. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __address_h +#define __address_h 1 + +/* + * Memory definitions + */ +#define REALVIEW_BOOT_ROM_LO 0x30000000 /* DoC Base (64Mb)...*/ +#define REALVIEW_BOOT_ROM_HI 0x30000000 +#define REALVIEW_BOOT_ROM_BASE REALVIEW_BOOT_ROM_HI /* Normal position */ +#define REALVIEW_BOOT_ROM_SIZE SZ_64M + +#define REALVIEW_SSRAM_BASE /* REALVIEW_SSMC_BASE ? */ +#define REALVIEW_SSRAM_SIZE SZ_2M + +#define REALVIEW_FLASH_BASE 0x40000000 +#define REALVIEW_FLASH_SIZE SZ_64M + +/* + * SDRAM + */ +#define REALVIEW_SDRAM_BASE 0x00000000 + +/* + * Logic expansion modules + * + */ + + +/* ------------------------------------------------------------------------ + * RealView Registers + * ------------------------------------------------------------------------ + * + */ +#define REALVIEW_SYS_ID_OFFSET 0x00 +#define REALVIEW_SYS_SW_OFFSET 0x04 +#define REALVIEW_SYS_LED_OFFSET 0x08 +#define REALVIEW_SYS_OSC0_OFFSET 0x0C + +#define REALVIEW_SYS_OSC1_OFFSET 0x10 +#define REALVIEW_SYS_OSC2_OFFSET 0x14 +#define REALVIEW_SYS_OSC3_OFFSET 0x18 +#define REALVIEW_SYS_OSC4_OFFSET 0x1C /* OSC1 for RealView/AB */ + +#define REALVIEW_SYS_LOCK_OFFSET 0x20 +#define REALVIEW_SYS_100HZ_OFFSET 0x24 +#define REALVIEW_SYS_CFGDATA1_OFFSET 0x28 +#define REALVIEW_SYS_CFGDATA2_OFFSET 0x2C +#define REALVIEW_SYS_FLAGS_OFFSET 0x30 +#define REALVIEW_SYS_FLAGSSET_OFFSET 0x30 +#define REALVIEW_SYS_FLAGSCLR_OFFSET 0x34 +#define REALVIEW_SYS_NVFLAGS_OFFSET 0x38 +#define REALVIEW_SYS_NVFLAGSSET_OFFSET 0x38 +#define REALVIEW_SYS_NVFLAGSCLR_OFFSET 0x3C +#define REALVIEW_SYS_RESETCTL_OFFSET 0x40 +#define REALVIEW_SYS_PCICTL_OFFSET 0x44 +#define REALVIEW_SYS_MCI_OFFSET 0x48 +#define REALVIEW_SYS_FLASH_OFFSET 0x4C +#define REALVIEW_SYS_CLCD_OFFSET 0x50 +#define REALVIEW_SYS_CLCDSER_OFFSET 0x54 +#define REALVIEW_SYS_BOOTCS_OFFSET 0x58 +#define REALVIEW_SYS_24MHz_OFFSET 0x5C +#define REALVIEW_SYS_MISC_OFFSET 0x60 +#define REALVIEW_SYS_IOSEL_OFFSET 0x70 +#define REALVIEW_SYS_TEST_OSC0_OFFSET 0x80 +#define REALVIEW_SYS_TEST_OSC1_OFFSET 0x84 +#define REALVIEW_SYS_TEST_OSC2_OFFSET 0x88 +#define REALVIEW_SYS_TEST_OSC3_OFFSET 0x8C +#define REALVIEW_SYS_TEST_OSC4_OFFSET 0x90 + +#define REALVIEW_SYS_BASE 0x10000000 +#define REALVIEW_SYS_ID (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET) +#define REALVIEW_SYS_SW (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET) +#define REALVIEW_SYS_LED (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET) +#define REALVIEW_SYS_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET) +#define REALVIEW_SYS_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET) + +#define REALVIEW_SYS_LOCK (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET) +#define REALVIEW_SYS_100HZ (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET) +#define REALVIEW_SYS_CFGDATA1 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET) +#define REALVIEW_SYS_CFGDATA2 (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET) +#define REALVIEW_SYS_FLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET) +#define REALVIEW_SYS_FLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET) +#define REALVIEW_SYS_FLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET) +#define REALVIEW_SYS_NVFLAGS (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET) +#define REALVIEW_SYS_NVFLAGSSET (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET) +#define REALVIEW_SYS_NVFLAGSCLR (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET) +#define REALVIEW_SYS_RESETCTL (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET) +#define REALVIEW_SYS_PCICTL (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET) +#define REALVIEW_SYS_MCI (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET) +#define REALVIEW_SYS_FLASH (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET) +#define REALVIEW_SYS_CLCD (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET) +#define REALVIEW_SYS_CLCDSER (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET) +#define REALVIEW_SYS_BOOTCS (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET) +#define REALVIEW_SYS_24MHz (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET) +#define REALVIEW_SYS_MISC (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET) +#define REALVIEW_SYS_IOSEL (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET) +#define REALVIEW_SYS_TEST_OSC0 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET) +#define REALVIEW_SYS_TEST_OSC1 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET) +#define REALVIEW_SYS_TEST_OSC2 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET) +#define REALVIEW_SYS_TEST_OSC3 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET) +#define REALVIEW_SYS_TEST_OSC4 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET) + +/* + * Values for REALVIEW_SYS_RESET_CTRL + */ +#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR 0x01 +#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT 0x02 +#define REALVIEW_SYS_CTRL_RESET_DLLRESET 0x03 +#define REALVIEW_SYS_CTRL_RESET_PLLRESET 0x04 +#define REALVIEW_SYS_CTRL_RESET_POR 0x05 +#define REALVIEW_SYS_CTRL_RESET_DoC 0x06 + +#define REALVIEW_SYS_CTRL_LED (1 << 0) + + +/* ------------------------------------------------------------------------ + * RealView control registers + * ------------------------------------------------------------------------ + */ + +/* + * REALVIEW_IDFIELD + * + * 31:24 = manufacturer (0x41 = ARM) + * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus) + * 15:12 = FPGA (0x3 = XVC600 or XVC600E) + * 11:4 = build value + * 3:0 = revision number (0x1 = rev B (AHB)) + */ + +/* + * REALVIEW_SYS_LOCK + * control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, + * SYS_CLD, SYS_BOOTCS + */ +#define REALVIEW_SYS_LOCK_LOCKED (1 << 16) +#define REALVIEW_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */ + +/* + * REALVIEW_SYS_FLASH + */ +#define REALVIEW_FLASHPROG_FLVPPEN (1 << 0) /* Enable writing to flash */ + +/* + * REALVIEW_INTREG + * - used to acknowledge and control MMCI and UART interrupts + */ +#define REALVIEW_INTREG_WPROT 0x00 /* MMC protection status (no interrupt generated) */ +#define REALVIEW_INTREG_RI0 0x01 /* Ring indicator UART0 is asserted, */ +#define REALVIEW_INTREG_CARDIN 0x08 /* MMCI card in detect */ + /* write 1 to acknowledge and clear */ +#define REALVIEW_INTREG_RI1 0x02 /* Ring indicator UART1 is asserted, */ +#define REALVIEW_INTREG_CARDINSERT 0x03 /* Signal insertion of MMC card */ + +/* + * REALVIEW peripheral addresses + */ +#define REALVIEW_SCTL_BASE 0x10001000 /* System controller */ +#define REALVIEW_I2C_BASE 0x10002000 /* I2C control */ + /* Reserved 0x10003000 */ +#define REALVIEW_AACI_BASE 0x10004000 /* Audio */ +#define REALVIEW_MMCI0_BASE 0x10005000 /* MMC interface */ +#define REALVIEW_KMI0_BASE 0x10006000 /* KMI interface */ +#define REALVIEW_KMI1_BASE 0x10007000 /* KMI 2nd interface */ +#define REALVIEW_CHAR_LCD_BASE 0x10008000 /* Character LCD */ +#define REALVIEW_UART0_BASE 0x10009000 /* UART 0 */ +#define REALVIEW_UART1_BASE 0x1000A000 /* UART 1 */ +#define REALVIEW_UART2_BASE 0x1000B000 /* UART 2 */ +#define REALVIEW_UART3_BASE 0x1000C000 /* UART 3 */ +#define REALVIEW_SSP_BASE 0x1000D000 /* Synchronous Serial Port */ +#define REALVIEW_SCI_BASE 0x1000E000 /* Smart card controller */ + /* Reserved 0x1000F000 */ +#define REALVIEW_WATCHDOG_BASE 0x10010000 /* watchdog interface */ +#define REALVIEW_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */ +#define REALVIEW_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */ +#define REALVIEW_GPIO0_BASE 0x10013000 /* GPIO port 0 */ +#define REALVIEW_GPIO1_BASE 0x10014000 /* GPIO port 1 */ +#define REALVIEW_GPIO2_BASE 0x10015000 /* GPIO port 2 */ + /* Reserved 0x10016000 */ +#define REALVIEW_RTC_BASE 0x10017000 /* Real Time Clock */ +#define REALVIEW_DMC_BASE 0x10018000 /* DMC configuration */ +#define REALVIEW_PCI_CORE_BASE 0x10019000 /* PCI configuration */ + /* Reserved 0x1001A000 - 0x1001FFFF */ +#define REALVIEW_CLCD_BASE 0x10020000 /* CLCD */ +#define REALVIEW_DMAC_BASE 0x10030000 /* DMA controller */ +#define REALVIEW_GIC_CPU_BASE 0x10040000 /* Generic interrupt controller CPU interface */ +#define REALVIEW_GIC_DIST_BASE 0x10041000 /* Generic interrupt controller distributor */ +#define REALVIEW_SMC_BASE 0x10080000 /* SMC */ + /* Reserved 0x10090000 - 0x100EFFFF */ + +#define REALVIEW_ETH_BASE 0x4E000000 /* Ethernet */ + +/* PCI space */ +#define REALVIEW_PCI_BASE 0x41000000 /* PCI Interface */ +#define REALVIEW_PCI_CFG_BASE 0x42000000 +#define REALVIEW_PCI_MEM_BASE0 0x44000000 +#define REALVIEW_PCI_MEM_BASE1 0x50000000 +#define REALVIEW_PCI_MEM_BASE2 0x60000000 +/* Sizes of above maps */ +#define REALVIEW_PCI_BASE_SIZE 0x01000000 +#define REALVIEW_PCI_CFG_BASE_SIZE 0x02000000 +#define REALVIEW_PCI_MEM_BASE0_SIZE 0x0c000000 /* 32Mb */ +#define REALVIEW_PCI_MEM_BASE1_SIZE 0x10000000 /* 256Mb */ +#define REALVIEW_PCI_MEM_BASE2_SIZE 0x10000000 /* 256Mb */ + +#define REALVIEW_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */ +#define REALVIEW_LT_BASE 0x80000000 /* Logic Tile expansion */ + +/* + * Disk on Chip + */ +#define REALVIEW_DOC_BASE 0x2C000000 +#define REALVIEW_DOC_SIZE (16 << 20) +#define REALVIEW_DOC_PAGE_SIZE 512 +#define REALVIEW_DOC_TOTAL_PAGES (DOC_SIZE / PAGE_SIZE) + +#define ERASE_UNIT_PAGES 32 +#define START_PAGE 0x80 + +/* + * LED settings, bits [7:0] + */ +#define REALVIEW_SYS_LED0 (1 << 0) +#define REALVIEW_SYS_LED1 (1 << 1) +#define REALVIEW_SYS_LED2 (1 << 2) +#define REALVIEW_SYS_LED3 (1 << 3) +#define REALVIEW_SYS_LED4 (1 << 4) +#define REALVIEW_SYS_LED5 (1 << 5) +#define REALVIEW_SYS_LED6 (1 << 6) +#define REALVIEW_SYS_LED7 (1 << 7) + +#define ALL_LEDS 0xFF + +#define LED_BANK REALVIEW_SYS_LED + +/* + * Control registers + */ +#define REALVIEW_IDFIELD_OFFSET 0x0 /* RealView build information */ +#define REALVIEW_FLASHPROG_OFFSET 0x4 /* Flash devices */ +#define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */ +#define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */ + +/* ------------------------------------------------------------------------ + * Interrupts - bit assignment (primary) + * ------------------------------------------------------------------------ + */ +#define INT_WDOGINT 0 /* Watchdog timer */ +#define INT_SOFTINT 1 /* Software interrupt */ +#define INT_COMMRx 2 /* Debug Comm Rx interrupt */ +#define INT_COMMTx 3 /* Debug Comm Tx interrupt */ +#define INT_TIMERINT0_1 4 /* Timer 0 and 1 */ +#define INT_TIMERINT2_3 5 /* Timer 2 and 3 */ +#define INT_GPIOINT0 6 /* GPIO 0 */ +#define INT_GPIOINT1 7 /* GPIO 1 */ +#define INT_GPIOINT2 8 /* GPIO 2 */ +/* 9 reserved */ +#define INT_RTCINT 10 /* Real Time Clock */ +#define INT_SSPINT 11 /* Synchronous Serial Port */ +#define INT_UARTINT0 12 /* UART 0 on development chip */ +#define INT_UARTINT1 13 /* UART 1 on development chip */ +#define INT_UARTINT2 14 /* UART 2 on development chip */ +#define INT_UARTINT3 15 /* UART 3 on development chip */ +#define INT_SCIINT 16 /* Smart Card Interface */ +#define INT_MMCI0A 17 /* Multimedia Card 0A */ +#define INT_MMCI0B 18 /* Multimedia Card 0B */ +#define INT_AACI 19 /* Audio Codec */ +#define INT_KMI0 20 /* Keyboard/Mouse port 0 */ +#define INT_KMI1 21 /* Keyboard/Mouse port 1 */ +#define INT_CHARLCD 22 /* Character LCD */ +#define INT_CLCDINT 23 /* CLCD controller */ +#define INT_DMAINT 24 /* DMA controller */ +#define INT_PWRFAILINT 25 /* Power failure */ +#define INT_PISMO 26 +#define INT_DoC 27 /* Disk on Chip memory controller */ +#define INT_ETH 28 /* Ethernet controller */ +#define INT_USB 29 /* USB controller */ +#define INT_TSPENINT 30 /* Touchscreen pen */ +#define INT_TSKPADINT 31 /* Touchscreen keypad */ + +/* + * Interrupt bit positions + * + */ +#define INTMASK_WDOGINT (1 << INT_WDOGINT) +#define INTMASK_SOFTINT (1 << INT_SOFTINT) +#define INTMASK_COMMRx (1 << INT_COMMRx) +#define INTMASK_COMMTx (1 << INT_COMMTx) +#define INTMASK_TIMERINT0_1 (1 << INT_TIMERINT0_1) +#define INTMASK_TIMERINT2_3 (1 << INT_TIMERINT2_3) +#define INTMASK_GPIOINT0 (1 << INT_GPIOINT0) +#define INTMASK_GPIOINT1 (1 << INT_GPIOINT1) +#define INTMASK_GPIOINT2 (1 << INT_GPIOINT2) +#define INTMASK_RTCINT (1 << INT_RTCINT) +#define INTMASK_SSPINT (1 << INT_SSPINT) +#define INTMASK_UARTINT0 (1 << INT_UARTINT0) +#define INTMASK_UARTINT1 (1 << INT_UARTINT1) +#define INTMASK_UARTINT2 (1 << INT_UARTINT2) +#define INTMASK_UARTINT3 (1 << INT_UARTINT3) +#define INTMASK_SCIINT (1 << INT_SCIINT) +#define INTMASK_MMCI0A (1 << INT_MMCI0A) +#define INTMASK_MMCI0B (1 << INT_MMCI0B) +#define INTMASK_AACI (1 << INT_AACI) +#define INTMASK_KMI0 (1 << INT_KMI0) +#define INTMASK_KMI1 (1 << INT_KMI1) +#define INTMASK_CHARLCD (1 << INT_CHARLCD) +#define INTMASK_CLCDINT (1 << INT_CLCDINT) +#define INTMASK_DMAINT (1 << INT_DMAINT) +#define INTMASK_PWRFAILINT (1 << INT_PWRFAILINT) +#define INTMASK_PISMO (1 << INT_PISMO) +#define INTMASK_DoC (1 << INT_DoC) +#define INTMASK_ETH (1 << INT_ETH) +#define INTMASK_USB (1 << INT_USB) +#define INTMASK_TSPENINT (1 << INT_TSPENINT) +#define INTMASK_TSKPADINT (1 << INT_TSKPADINT) + +#define MAXIRQNUM 31 +#define MAXFIQNUM 31 +#define MAXSWINUM 31 + +/* + * Application Flash + * + */ +#define FLASH_BASE REALVIEW_FLASH_BASE +#define FLASH_SIZE REALVIEW_FLASH_SIZE +#define FLASH_END (FLASH_BASE + FLASH_SIZE - 1) +#define FLASH_BLOCK_SIZE SZ_128K + +/* + * Boot Flash + * + */ +#define EPROM_BASE REALVIEW_BOOT_ROM_HI +#define EPROM_SIZE REALVIEW_BOOT_ROM_SIZE +#define EPROM_END (EPROM_BASE + EPROM_SIZE - 1) + +/* + * Clean base - dummy + * + */ +#define CLEAN_BASE EPROM_BASE + +/* + * System controller bit assignment + */ +#define REALVIEW_REFCLK 0 +#define REALVIEW_TIMCLK 1 + +#define REALVIEW_TIMER1_EnSel 15 +#define REALVIEW_TIMER2_EnSel 17 +#define REALVIEW_TIMER3_EnSel 19 +#define REALVIEW_TIMER4_EnSel 21 + + +#define MAX_TIMER 2 +#define MAX_PERIOD 699050 +#define TICKS_PER_uSEC 1 + +/* + * These are useconds NOT ticks. + * + */ +#define mSEC_1 1000 +#define mSEC_5 (mSEC_1 * 5) +#define mSEC_10 (mSEC_1 * 10) +#define mSEC_25 (mSEC_1 * 25) +#define SEC_1 (mSEC_1 * 1000) + +#define REALVIEW_CSR_BASE 0x10000000 +#define REALVIEW_CSR_SIZE 0x10000000 + +#endif + +/* END */ diff --git a/include/asm-arm/arch-realview/system.h b/include/asm-arm/arch-realview/system.h new file mode 100644 index 0000000000000000000000000000000000000000..9f8fcbca0869edfbf06829657c751391d527786b --- /dev/null +++ b/include/asm-arm/arch-realview/system.h @@ -0,0 +1,51 @@ +/* + * linux/include/asm-arm/arch-realview/system.h + * + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H + +#include +#include +#include + +static inline void arch_idle(void) +{ + /* + * This should do all the clock switching + * and wait for interrupt tricks + */ + cpu_do_idle(); +} + +static inline void arch_reset(char mode) +{ + unsigned int hdr_ctrl = (IO_ADDRESS(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET); + unsigned int val; + + /* + * To reset, we hit the on-board reset register + * in the system FPGA + */ + val = __raw_readl(hdr_ctrl); + val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR; + __raw_writel(val, hdr_ctrl); +} + +#endif diff --git a/include/asm-arm/arch-realview/timex.h b/include/asm-arm/arch-realview/timex.h new file mode 100644 index 0000000000000000000000000000000000000000..5b9d82d0a5e05bed03cf405ba7188706be4a295e --- /dev/null +++ b/include/asm-arm/arch-realview/timex.h @@ -0,0 +1,23 @@ +/* + * linux/include/asm-arm/arch-realview/timex.h + * + * RealView architecture timex specifications + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define CLOCK_TICK_RATE (50000000 / 16) diff --git a/include/asm-arm/arch-realview/uncompress.h b/include/asm-arm/arch-realview/uncompress.h new file mode 100644 index 0000000000000000000000000000000000000000..b5e4d360665b31d276c92d1b044e5fca1486ab31 --- /dev/null +++ b/include/asm-arm/arch-realview/uncompress.h @@ -0,0 +1,54 @@ +/* + * linux/include/asm-arm/arch-realview/uncompress.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include + +#define AMBA_UART_DR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x00)) +#define AMBA_UART_LCRH (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x2c)) +#define AMBA_UART_CR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x30)) +#define AMBA_UART_FR (*(volatile unsigned char *) (REALVIEW_UART0_BASE + 0x18)) + +/* + * This does not append a newline + */ +static void putstr(const char *s) +{ + while (*s) { + while (AMBA_UART_FR & (1 << 5)) + barrier(); + + AMBA_UART_DR = *s; + + if (*s == '\n') { + while (AMBA_UART_FR & (1 << 5)) + barrier(); + + AMBA_UART_DR = '\r'; + } + s++; + } + while (AMBA_UART_FR & (1 << 3)) + barrier(); +} + +/* + * nothing to do + */ +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/include/asm-arm/arch-realview/vmalloc.h b/include/asm-arm/arch-realview/vmalloc.h new file mode 100644 index 0000000000000000000000000000000000000000..0ad49af186afd441c9a1dacb2e7f4f3743bd84ef --- /dev/null +++ b/include/asm-arm/arch-realview/vmalloc.h @@ -0,0 +1,21 @@ +/* + * linux/include/asm-arm/arch-realview/vmalloc.h + * + * Copyright (C) 2003 ARM Limited + * Copyright (C) 2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#define VMALLOC_END (PAGE_OFFSET + 0x18000000) diff --git a/include/asm-arm/arch-s3c2410/regs-iis.h b/include/asm-arm/arch-s3c2410/regs-iis.h index fdd62e8cd6cb77c7ad23990e361075dd03edbb43..7fdde9b91cb40bef4fff720ccef45b950760b7e7 100644 --- a/include/asm-arm/arch-s3c2410/regs-iis.h +++ b/include/asm-arm/arch-s3c2410/regs-iis.h @@ -55,6 +55,7 @@ #define S3C2410_IISMOD_16FS (0<<0) #define S3C2410_IISMOD_32FS (1<<0) #define S3C2410_IISMOD_48FS (2<<0) +#define S3C2410_IISMOD_FS_MASK (3<<0) #define S3C2410_IISPSR (0x08) #define S3C2410_IISPSR_INTMASK (31<<5) diff --git a/include/asm-arm/hardware/amba_clcd.h b/include/asm-arm/hardware/amba_clcd.h index ce4cf5c1c05d7affced4678fea31b1fcdf68822d..6b8d73dc1ab09d269972d1373984150ebebb5c86 100644 --- a/include/asm-arm/hardware/amba_clcd.h +++ b/include/asm-arm/hardware/amba_clcd.h @@ -22,7 +22,7 @@ #define CLCD_UBAS 0x00000010 #define CLCD_LBAS 0x00000014 -#ifndef CONFIG_ARCH_VERSATILE +#if !defined(CONFIG_ARCH_VERSATILE) && !defined(CONFIG_ARCH_REALVIEW) #define CLCD_IENB 0x00000018 #define CLCD_CNTL 0x0000001c #else