提交 7e610caa 编写于 作者: S Sony Chacko 提交者: David S. Miller

qlcnic: Support for GBE port settings

Enable setting speed and auto negotiation parameters for GbE ports.
Hardware do not support half duplex setting currently.

o Update driver version to 5.0.17.
Signed-off-by: NSony Chacko <sony.chacko@qlogic.com>
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 f94bc1e7
......@@ -36,8 +36,8 @@
#define _QLCNIC_LINUX_MAJOR 5
#define _QLCNIC_LINUX_MINOR 0
#define _QLCNIC_LINUX_SUBVERSION 16
#define QLCNIC_LINUX_VERSIONID "5.0.16"
#define _QLCNIC_LINUX_SUBVERSION 17
#define QLCNIC_LINUX_VERSIONID "5.0.17"
#define QLCNIC_DRV_IDC_VER 0x01
#define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\
(_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
......@@ -573,8 +573,10 @@ struct qlcnic_recv_context {
#define QLCNIC_CDRP_CMD_CONFIGURE_ESWITCH 0x00000028
#define QLCNIC_CDRP_CMD_GET_ESWITCH_PORT_CONFIG 0x00000029
#define QLCNIC_CDRP_CMD_GET_ESWITCH_STATS 0x0000002a
#define QLCNIC_CDRP_CMD_CONFIG_PORT 0x0000002E
#define QLCNIC_RCODE_SUCCESS 0
#define QLCNIC_RCODE_NOT_SUPPORTED 9
#define QLCNIC_RCODE_TIMEOUT 17
#define QLCNIC_DESTROY_CTX_RESET 0
......@@ -1155,8 +1157,7 @@ struct qlcnic_esw_statistics {
struct __qlcnic_esw_statistics tx;
};
int qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val);
int qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val);
int qlcnic_fw_cmd_set_port(struct qlcnic_adapter *adapter, u32 config);
u32 qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off);
int qlcnic_hw_write_wx_2M(struct qlcnic_adapter *, ulong off, u32 data);
......
......@@ -359,33 +359,15 @@ qlcnic_fw_cmd_destroy_tx_ctx(struct qlcnic_adapter *adapter)
}
int
qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val)
{
if (qlcnic_issue_cmd(adapter,
adapter->ahw->pci_func,
adapter->fw_hal_version,
reg,
0,
0,
QLCNIC_CDRP_CMD_READ_PHY)) {
return -EIO;
}
return QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
}
int
qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val)
qlcnic_fw_cmd_set_port(struct qlcnic_adapter *adapter, u32 config)
{
return qlcnic_issue_cmd(adapter,
adapter->ahw->pci_func,
adapter->fw_hal_version,
reg,
val,
config,
0,
0,
QLCNIC_CDRP_CMD_WRITE_PHY);
QLCNIC_CDRP_CMD_CONFIG_PORT);
}
int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter)
......
......@@ -284,50 +284,44 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
static int
qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
u32 config = 0;
u32 ret = 0;
struct qlcnic_adapter *adapter = netdev_priv(dev);
__u32 status;
if (adapter->ahw->port_type != QLCNIC_GBE)
return -EOPNOTSUPP;
/* read which mode */
if (adapter->ahw->port_type == QLCNIC_GBE) {
/* autonegotiation */
if (qlcnic_fw_cmd_set_phy(adapter,
QLCNIC_NIU_GB_MII_MGMT_ADDR_AUTONEG,
ecmd->autoneg) != 0)
return -EIO;
else
adapter->link_autoneg = ecmd->autoneg;
if (ecmd->duplex)
config |= 0x1;
if (qlcnic_fw_cmd_query_phy(adapter,
QLCNIC_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
&status) != 0)
return -EIO;
if (ecmd->autoneg)
config |= 0x2;
switch (ecmd->speed) {
case SPEED_10:
qlcnic_set_phy_speed(status, 0);
break;
case SPEED_100:
qlcnic_set_phy_speed(status, 1);
break;
case SPEED_1000:
qlcnic_set_phy_speed(status, 2);
break;
}
switch (ethtool_cmd_speed(ecmd)) {
case SPEED_10:
config |= (0 << 8);
break;
case SPEED_100:
config |= (1 << 8);
break;
case SPEED_1000:
config |= (10 << 8);
break;
default:
return -EIO;
}
if (ecmd->duplex == DUPLEX_HALF)
qlcnic_clear_phy_duplex(status);
if (ecmd->duplex == DUPLEX_FULL)
qlcnic_set_phy_duplex(status);
if (qlcnic_fw_cmd_set_phy(adapter,
QLCNIC_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
*((int *)&status)) != 0)
return -EIO;
else {
adapter->link_speed = ecmd->speed;
adapter->link_duplex = ecmd->duplex;
}
} else
ret = qlcnic_fw_cmd_set_port(adapter, config);
if (ret == QLCNIC_RCODE_NOT_SUPPORTED)
return -EOPNOTSUPP;
else if (ret)
return -EIO;
adapter->link_speed = ethtool_cmd_speed(ecmd);
adapter->link_duplex = ecmd->duplex;
adapter->link_autoneg = ecmd->autoneg;
if (!netif_running(dev))
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册