提交 7dae3a63 编写于 作者: A Arend van Spriel 提交者: Greg Kroah-Hartman

staging: brcm80211: remove static global variables from dhd_sdio.c

Several global variables that were set but never initialized have
been removed.
Reported-by: NJohannes Berg <johannes@sipsolutions.net>
Reviewed-by: NFranky (Zhenhui) Lin <frankyl@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 22a91197
......@@ -761,26 +761,18 @@ module_param(brcmf_poll, uint, 0);
uint brcmf_intr = true;
module_param(brcmf_intr, uint, 0);
/* IOCTL response timeout */
static int brcmf_ioctl_timeout_msec = IOCTL_RESP_TIMEOUT;
/* override the RAM size if possible */
#define DONGLE_MIN_MEMSIZE (128 * 1024)
int brcmf_dongle_memsize;
module_param(brcmf_dongle_memsize, int, 0);
static bool brcmf_alignctl;
static bool retrydata;
#define RETRYCHAN(chan) (((chan) == SDPCM_EVENT_CHANNEL) || retrydata)
static const uint firstread = BRCMF_FIRSTREAD;
#define RETRYCHAN(chan) ((chan) == SDPCM_EVENT_CHANNEL)
/* Retry count for register access failures */
static const uint retry_limit = 2;
/* Force even SD lengths (some host controllers mess up on odd bytes) */
static bool forcealign;
/* Limit on rounding up frames */
static const uint max_roundup = 512;
#define ALIGNMENT 4
......@@ -794,12 +786,6 @@ static void pkt_align(struct sk_buff *p, int len, int align)
__skb_trim(p, len);
}
/* Limit on rounding up frames */
static const uint max_roundup = 512;
/* Try doing readahead */
static bool brcmf_readahead;
/* To check if there's window offered */
static bool data_ok(struct brcmf_bus *bus)
{
......@@ -1697,7 +1683,7 @@ static int brcmf_sdbrcm_ioctl_resp_wait(struct brcmf_bus *bus, uint *condition,
bool *pending)
{
DECLARE_WAITQUEUE(wait, current);
int timeout = msecs_to_jiffies(brcmf_ioctl_timeout_msec);
int timeout = msecs_to_jiffies(IOCTL_RESP_TIMEOUT);
/* Wait until control frame is available */
add_wait_queue(&bus->ioctl_resp_wait, &wait);
......@@ -1733,21 +1719,19 @@ brcmf_sdbrcm_read_control(struct brcmf_bus *bus, u8 *hdr, uint len, uint doff)
/* Set rxctl for frame (w/optional alignment) */
bus->rxctl = bus->rxbuf;
if (brcmf_alignctl) {
bus->rxctl += firstread;
pad = ((unsigned long)bus->rxctl % BRCMF_SDALIGN);
if (pad)
bus->rxctl += (BRCMF_SDALIGN - pad);
bus->rxctl -= firstread;
}
bus->rxctl += BRCMF_FIRSTREAD;
pad = ((unsigned long)bus->rxctl % BRCMF_SDALIGN);
if (pad)
bus->rxctl += (BRCMF_SDALIGN - pad);
bus->rxctl -= BRCMF_FIRSTREAD;
/* Copy the already-read portion over */
memcpy(bus->rxctl, hdr, firstread);
if (len <= firstread)
memcpy(bus->rxctl, hdr, BRCMF_FIRSTREAD);
if (len <= BRCMF_FIRSTREAD)
goto gotpkt;
/* Raise rdlen to next SDIO block to avoid tail command */
rdlen = len - firstread;
rdlen = len - BRCMF_FIRSTREAD;
if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) {
pad = bus->blocksize - (rdlen % bus->blocksize);
if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
......@@ -1758,11 +1742,11 @@ brcmf_sdbrcm_read_control(struct brcmf_bus *bus, u8 *hdr, uint len, uint doff)
}
/* Satisfy length-alignment requirements */
if (forcealign && (rdlen & (ALIGNMENT - 1)))
if (rdlen & (ALIGNMENT - 1))
rdlen = roundup(rdlen, ALIGNMENT);
/* Drop if the read is too big or it exceeds our maximum */
if ((rdlen + firstread) > bus->drvr->maxctl) {
if ((rdlen + BRCMF_FIRSTREAD) > bus->drvr->maxctl) {
brcmf_dbg(ERROR, "%d-byte control read exceeds %d-byte buffer\n",
rdlen, bus->drvr->maxctl);
bus->drvr->rx_errors++;
......@@ -1783,7 +1767,7 @@ brcmf_sdbrcm_read_control(struct brcmf_bus *bus, u8 *hdr, uint len, uint doff)
sdret = brcmf_sdcard_recv_buf(bus->sdiodev,
bus->sdiodev->sbwad,
SDIO_FUNC_2,
F2SYNC, (bus->rxctl + firstread), rdlen,
F2SYNC, (bus->rxctl + BRCMF_FIRSTREAD), rdlen,
NULL);
bus->f2rxdata++;
......@@ -1857,7 +1841,7 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished)
}
/* Try doing single read if we can */
if (brcmf_readahead && bus->nextlen) {
if (bus->nextlen) {
u16 nextlen = bus->nextlen;
bus->nextlen = 0;
......@@ -1871,7 +1855,7 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished)
(rdlen % bus->blocksize);
if ((pad <= bus->roundup)
&& (pad < bus->blocksize)
&& ((rdlen + pad + firstread) <
&& ((rdlen + pad + BRCMF_FIRSTREAD) <
MAX_RX_DATASZ))
rdlen += pad;
} else if (rdlen % BRCMF_SDALIGN) {
......@@ -2055,8 +2039,8 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished)
/* Read frame header (hardware and software) */
sdret = brcmf_sdcard_recv_buf(bus->sdiodev, bus->sdiodev->sbwad,
SDIO_FUNC_2, F2SYNC, bus->rxhdr, firstread,
NULL);
SDIO_FUNC_2, F2SYNC, bus->rxhdr,
BRCMF_FIRSTREAD, NULL);
bus->f2rxhdrs++;
if (sdret < 0) {
......@@ -2162,24 +2146,24 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished)
SDPCM_GLOM_CHANNEL */
/* Length to read */
rdlen = (len > firstread) ? (len - firstread) : 0;
rdlen = (len > BRCMF_FIRSTREAD) ? (len - BRCMF_FIRSTREAD) : 0;
/* May pad read to blocksize for efficiency */
if (bus->roundup && bus->blocksize &&
(rdlen > bus->blocksize)) {
pad = bus->blocksize - (rdlen % bus->blocksize);
if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
((rdlen + pad + firstread) < MAX_RX_DATASZ))
((rdlen + pad + BRCMF_FIRSTREAD) < MAX_RX_DATASZ))
rdlen += pad;
} else if (rdlen % BRCMF_SDALIGN) {
rdlen += BRCMF_SDALIGN - (rdlen % BRCMF_SDALIGN);
}
/* Satisfy length-alignment requirements */
if (forcealign && (rdlen & (ALIGNMENT - 1)))
if (rdlen & (ALIGNMENT - 1))
rdlen = roundup(rdlen, ALIGNMENT);
if ((rdlen + firstread) > MAX_RX_DATASZ) {
if ((rdlen + BRCMF_FIRSTREAD) > MAX_RX_DATASZ) {
/* Too long -- skip this frame */
brcmf_dbg(ERROR, "too long: len %d rdlen %d\n",
len, rdlen);
......@@ -2189,7 +2173,8 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished)
continue;
}
pkt = brcmu_pkt_buf_get_skb(rdlen + firstread + BRCMF_SDALIGN);
pkt = brcmu_pkt_buf_get_skb(rdlen +
BRCMF_FIRSTREAD + BRCMF_SDALIGN);
if (!pkt) {
/* Give up on data, request rtx of events */
brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed: rdlen %d chan %d\n",
......@@ -2200,7 +2185,7 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished)
}
/* Leave room for what we already read, and align remainder */
skb_pull(pkt, firstread);
skb_pull(pkt, BRCMF_FIRSTREAD);
pkt_align(pkt, rdlen, BRCMF_SDALIGN);
/* Read the remaining frame data */
......@@ -2221,8 +2206,8 @@ brcmf_sdbrcm_readframes(struct brcmf_bus *bus, uint maxframes, bool *finished)
}
/* Copy the already-read portion */
skb_push(pkt, firstread);
memcpy(pkt->data, bus->rxhdr, firstread);
skb_push(pkt, BRCMF_FIRSTREAD);
memcpy(pkt->data, bus->rxhdr, BRCMF_FIRSTREAD);
#ifdef BCMDBG
if (BRCMF_BYTES_ON() && BRCMF_DATA_ON()) {
......@@ -2328,7 +2313,6 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_bus *bus, struct sk_buff *pkt,
u8 *frame;
u16 len, pad = 0;
u32 swheader;
uint retries = 0;
struct sk_buff *new;
int i;
......@@ -2413,48 +2397,44 @@ static int brcmf_sdbrcm_txpkt(struct brcmf_bus *bus, struct sk_buff *pkt,
}
/* Some controllers have trouble with odd bytes -- round to even */
if (forcealign && (len & (ALIGNMENT - 1)))
if (len & (ALIGNMENT - 1))
len = roundup(len, ALIGNMENT);
do {
ret = brcmf_sdbrcm_send_buf(bus, bus->sdiodev->sbwad,
SDIO_FUNC_2, F2SYNC, frame,
len, pkt);
bus->f2txdata++;
ret = brcmf_sdbrcm_send_buf(bus, bus->sdiodev->sbwad,
SDIO_FUNC_2, F2SYNC, frame,
len, pkt);
bus->f2txdata++;
if (ret < 0) {
/* On failure, abort the command
and terminate the frame */
brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
ret);
bus->tx_sderrs++;
if (ret < 0) {
/* On failure, abort the command and terminate the frame */
brcmf_dbg(INFO, "sdio error %d, abort command and terminate frame\n",
ret);
bus->tx_sderrs++;
brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM,
NULL);
bus->f1regdata++;
for (i = 0; i < 3; i++) {
u8 hi, lo;
hi = brcmf_sdcard_cfg_read(bus->sdiodev,
SDIO_FUNC_1,
SBSDIO_FUNC1_WFRAMEBCHI,
NULL);
lo = brcmf_sdcard_cfg_read(bus->sdiodev,
SDIO_FUNC_1,
SBSDIO_FUNC1_WFRAMEBCLO,
NULL);
bus->f1regdata += 2;
if ((hi == 0) && (lo == 0))
break;
}
brcmf_sdcard_abort(bus->sdiodev, SDIO_FUNC_2);
brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM,
NULL);
bus->f1regdata++;
for (i = 0; i < 3; i++) {
u8 hi, lo;
hi = brcmf_sdcard_cfg_read(bus->sdiodev,
SDIO_FUNC_1,
SBSDIO_FUNC1_WFRAMEBCHI,
NULL);
lo = brcmf_sdcard_cfg_read(bus->sdiodev,
SDIO_FUNC_1,
SBSDIO_FUNC1_WFRAMEBCLO,
NULL);
bus->f1regdata += 2;
if ((hi == 0) && (lo == 0))
break;
}
if (ret == 0)
bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
} while ((ret < 0) && retrydata && retries++ < TXRETRIES);
}
if (ret == 0)
bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQUENCE_WRAP;
done:
/* restore pkt buffer pointer before calling tx complete routine */
......@@ -3259,16 +3239,14 @@ brcmf_sdbrcm_bus_txctl(struct brcmf_bus *bus, unsigned char *msg, uint msglen)
len = (msglen += SDPCM_HDRLEN);
/* Add alignment padding (optional for ctl frames) */
if (brcmf_alignctl) {
doff = ((unsigned long)frame % BRCMF_SDALIGN);
if (doff) {
frame -= doff;
len += doff;
msglen += doff;
memset(frame, 0, doff + SDPCM_HDRLEN);
}
/* precondition: doff < BRCMF_SDALIGN */
doff = ((unsigned long)frame % BRCMF_SDALIGN);
if (doff) {
frame -= doff;
len += doff;
msglen += doff;
memset(frame, 0, doff + SDPCM_HDRLEN);
}
/* precondition: doff < BRCMF_SDALIGN */
doff += SDPCM_HDRLEN;
/* Round send length to next SDIO block */
......@@ -3281,7 +3259,7 @@ brcmf_sdbrcm_bus_txctl(struct brcmf_bus *bus, unsigned char *msg, uint msglen)
}
/* Satisfy length-alignment requirements */
if (forcealign && (len & (ALIGNMENT - 1)))
if (len & (ALIGNMENT - 1))
len = roundup(len, ALIGNMENT);
/* precondition: IS_ALIGNED((unsigned long)frame, 2) */
......@@ -4825,14 +4803,9 @@ void *brcmf_sdbrcm_probe(u16 bus_no, u16 slot, u16 func, uint bustype,
*/
brcmf_txbound = BRCMF_TXBOUND;
brcmf_rxbound = BRCMF_RXBOUND;
brcmf_alignctl = true;
brcmf_readahead = true;
retrydata = false;
brcmf_dongle_memsize = 0;
brcmf_txminmax = BRCMF_TXMINMAX;
forcealign = true;
brcmf_c_init();
brcmf_dbg(TRACE, "Enter\n");
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册