Documentation/dynamic-debug-howto.txt: convert it to ReST markup

- use a quote blocks where needed;
- fix the chapter/section/subsection markups;
- use ``foo`` for monotonic;
- use .. note:: for the line-range note;
- cleanup whitespaces;
- add it to the user's book.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Documentation/dynamic-debug-howto.txt

+Dynamic debug
++++++++++++++
+
 
 Introduction
 ============
@@ -6,16 +9,16 @@ This document describes how to use the dynamic debug (dyndbg) feature.
 
 Dynamic debug is designed to allow you to dynamically enable/disable
 kernel code to obtain additional kernel information.  Currently, if
-CONFIG_DYNAMIC_DEBUG is set, then all pr_debug()/dev_dbg() and
-print_hex_dump_debug()/print_hex_dump_bytes() calls can be dynamically
+``CONFIG_DYNAMIC_DEBUG`` is set, then all ``pr_debug()``/``dev_dbg()`` and
+``print_hex_dump_debug()``/``print_hex_dump_bytes()`` calls can be dynamically
 enabled per-callsite.
 
-If CONFIG_DYNAMIC_DEBUG is not set, print_hex_dump_debug() is just
-shortcut for print_hex_dump(KERN_DEBUG).
+If ``CONFIG_DYNAMIC_DEBUG`` is not set, ``print_hex_dump_debug()`` is just
+shortcut for ``print_hex_dump(KERN_DEBUG)``.
 
-For print_hex_dump_debug()/print_hex_dump_bytes(), format string is
-its 'prefix_str' argument, if it is constant string; or "hexdump"
-in case 'prefix_str' is build dynamically.
+For ``print_hex_dump_debug()``/``print_hex_dump_bytes()``, format string is
+its ``prefix_str`` argument, if it is constant string; or ``hexdump``
+in case ``prefix_str`` is build dynamically.
 
 Dynamic debug has even more useful features:
 
@@ -28,96 +31,95 @@ Dynamic debug has even more useful features:
    - module name
    - format string
 
- * Provides a debugfs control file: <debugfs>/dynamic_debug/control
+ * Provides a debugfs control file: ``<debugfs>/dynamic_debug/control``
    which can be read to display the complete list of known debug
    statements, to help guide you
 
 Controlling dynamic debug Behaviour
 ===================================
 
-The behaviour of pr_debug()/dev_dbg()s are controlled via writing to a
+The behaviour of ``pr_debug()``/``dev_dbg()`` are controlled via writing to a
 control file in the 'debugfs' filesystem. Thus, you must first mount
 the debugfs filesystem, in order to make use of this feature.
 Subsequently, we refer to the control file as:
-<debugfs>/dynamic_debug/control. For example, if you want to enable
-printing from source file 'svcsock.c', line 1603 you simply do:
+``<debugfs>/dynamic_debug/control``. For example, if you want to enable
+printing from source file ``svcsock.c``, line 1603 you simply do::
 
-nullarbor:~ # echo 'file svcsock.c line 1603 +p' >
+  nullarbor:~ # echo 'file svcsock.c line 1603 +p' >
 				<debugfs>/dynamic_debug/control
 
-If you make a mistake with the syntax, the write will fail thus:
+If you make a mistake with the syntax, the write will fail thus::
 
-nullarbor:~ # echo 'file svcsock.c wtf 1 +p' >
+  nullarbor:~ # echo 'file svcsock.c wtf 1 +p' >
 				<debugfs>/dynamic_debug/control
--bash: echo: write error: Invalid argument
+  -bash: echo: write error: Invalid argument
 
 Viewing Dynamic Debug Behaviour
-===========================
+===============================
 
 You can view the currently configured behaviour of all the debug
-statements via:
+statements via::
 
-nullarbor:~ # cat <debugfs>/dynamic_debug/control
-# filename:lineno [module]function flags format
-/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:323 [svcxprt_rdma]svc_rdma_cleanup =_ "SVCRDMA Module Removed, deregister RPC RDMA transport\012"
-/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:341 [svcxprt_rdma]svc_rdma_init =_ "\011max_inline       : %d\012"
-/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:340 [svcxprt_rdma]svc_rdma_init =_ "\011sq_depth         : %d\012"
-/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:338 [svcxprt_rdma]svc_rdma_init =_ "\011max_requests     : %d\012"
-...
+  nullarbor:~ # cat <debugfs>/dynamic_debug/control
+  # filename:lineno [module]function flags format
+  /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:323 [svcxprt_rdma]svc_rdma_cleanup =_ "SVCRDMA Module Removed, deregister RPC RDMA transport\012"
+  /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:341 [svcxprt_rdma]svc_rdma_init =_ "\011max_inline       : %d\012"
+  /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:340 [svcxprt_rdma]svc_rdma_init =_ "\011sq_depth         : %d\012"
+  /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:338 [svcxprt_rdma]svc_rdma_init =_ "\011max_requests     : %d\012"
+  ...
 
 
 You can also apply standard Unix text manipulation filters to this
-data, e.g.
+data, e.g.::
 
-nullarbor:~ # grep -i rdma <debugfs>/dynamic_debug/control  | wc -l
-62
+  nullarbor:~ # grep -i rdma <debugfs>/dynamic_debug/control  | wc -l
+  62
 
-nullarbor:~ # grep -i tcp <debugfs>/dynamic_debug/control | wc -l
-42
+  nullarbor:~ # grep -i tcp <debugfs>/dynamic_debug/control | wc -l
+  42
 
 The third column shows the currently enabled flags for each debug
 statement callsite (see below for definitions of the flags).  The
-default value, with no flags enabled, is "=_".  So you can view all
-the debug statement callsites with any non-default flags:
-
-nullarbor:~ # awk '$3 != "=_"' <debugfs>/dynamic_debug/control
-# filename:lineno [module]function flags format
-/usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c:1603 [sunrpc]svc_send p "svc_process: st_sendto returned %d\012"
+default value, with no flags enabled, is ``=_``.  So you can view all
+the debug statement callsites with any non-default flags::
 
+  nullarbor:~ # awk '$3 != "=_"' <debugfs>/dynamic_debug/control
+  # filename:lineno [module]function flags format
+  /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c:1603 [sunrpc]svc_send p "svc_process: st_sendto returned %d\012"
 
 Command Language Reference
 ==========================
 
 At the lexical level, a command comprises a sequence of words separated
-by spaces or tabs.  So these are all equivalent:
+by spaces or tabs.  So these are all equivalent::
 
-nullarbor:~ # echo -c 'file svcsock.c line 1603 +p' >
+  nullarbor:~ # echo -c 'file svcsock.c line 1603 +p' >
 				<debugfs>/dynamic_debug/control
-nullarbor:~ # echo -c '  file   svcsock.c     line  1603 +p  ' >
+  nullarbor:~ # echo -c '  file   svcsock.c     line  1603 +p  ' >
 				<debugfs>/dynamic_debug/control
-nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
+  nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
 				<debugfs>/dynamic_debug/control
 
 Command submissions are bounded by a write() system call.
-Multiple commands can be written together, separated by ';' or '\n'.
+Multiple commands can be written together, separated by ``;`` or ``\n``::
 
   ~# echo "func pnpacpi_get_resources +p; func pnp_assign_mem +p" \
      > <debugfs>/dynamic_debug/control
 
-If your query set is big, you can batch them too:
+If your query set is big, you can batch them too::
 
   ~# cat query-batch-file > <debugfs>/dynamic_debug/control
 
-A another way is to use wildcard. The match rule support '*' (matches
-zero or more characters) and '?' (matches exactly one character).For
-example, you can match all usb drivers:
+A another way is to use wildcard. The match rule support ``*`` (matches
+zero or more characters) and ``?`` (matches exactly one character).For
+example, you can match all usb drivers::
 
   ~# echo "file drivers/usb/* +p" > <debugfs>/dynamic_debug/control
 
 At the syntactical level, a command comprises a sequence of match
-specifications, followed by a flags change specification.
+specifications, followed by a flags change specification::
 
-command ::= match-spec* flags-spec
+  command ::= match-spec* flags-spec
 
 The match-spec's are used to choose a subset of the known pr_debug()
 callsites to which to apply the flags-spec.  Think of them as a query
@@ -126,35 +128,39 @@ match-specs will select all debug statement callsites.
 
 A match specification comprises a keyword, which controls the
 attribute of the callsite to be compared, and a value to compare
-against.  Possible keywords are:
+against.  Possible keywords are:::
 
-match-spec ::= 'func' string |
+  match-spec ::= 'func' string |
 		 'file' string |
 		 'module' string |
 		 'format' string |
 		 'line' line-range
 
-line-range ::= lineno |
+  line-range ::= lineno |
 		 '-'lineno |
 		 lineno'-' |
 		 lineno'-'lineno
-// Note: line-range cannot contain space, e.g.
-// "1-30" is valid range but "1 - 30" is not.
 
-lineno ::= unsigned-int
+  lineno ::= unsigned-int
+
+.. note::
+
+  ``line-range`` cannot contain space, e.g.
+  "1-30" is valid range but "1 - 30" is not.
+
 
 The meanings of each keyword are:
 
 func
     The given string is compared against the function name
-    of each callsite.  Example:
+    of each callsite.  Example::
 
 	func svc_tcp_accept
 
 file
     The given string is compared against either the full pathname, the
     src-root relative pathname, or the basename of the source file of
-    each callsite.  Examples:
+    each callsite.  Examples::
 
 	file svcsock.c
 	file kernel/freezer.c
@@ -163,8 +169,8 @@ file
 module
     The given string is compared against the module name
     of each callsite.  The module name is the string as
-    seen in "lsmod", i.e. without the directory or the .ko
-    suffix and with '-' changed to '_'.  Examples:
+    seen in ``lsmod``, i.e. without the directory or the ``.ko``
+    suffix and with ``-`` changed to ``_``.  Examples::
 
 	module sunrpc
 	module nfsd
@@ -174,10 +180,10 @@ format
     string.  Note that the string does not need to match the
     entire format, only some part.  Whitespace and other
     special characters can be escaped using C octal character
-    escape \ooo notation, e.g. the space character is \040.
+    escape ``\ooo`` notation, e.g. the space character is ``\040``.
     Alternatively, the string can be enclosed in double quote
-    characters (") or single quote characters (').
-    Examples:
+    characters (``"``) or single quote characters (``'``).
+    Examples::
 
 	format svcrdma:         // many of the NFS/RDMA server pr_debugs
 	format readahead        // some pr_debugs in the readahead cache
@@ -187,12 +193,12 @@ format
 
 line
     The given line number or range of line numbers is compared
-    against the line number of each pr_debug() callsite.  A single
+    against the line number of each ``pr_debug()`` callsite.  A single
     line number matches the callsite line number exactly.  A
     range of line numbers matches any callsite between the first
     and last line number inclusive.  An empty first number means
     the first line in the file, an empty line number means the
-    last number in the file.  Examples:
+    last number in the file.  Examples::
 
 	line 1603           // exactly line 1603
 	line 1600-1605      // the six lines from line 1600 to line 1605
@@ -201,13 +207,13 @@ line
 
 The flags specification comprises a change operation followed
 by one or more flag characters.  The change operation is one
-of the characters:
+of the characters::
 
   -    remove the given flags
   +    add the given flags
   =    set the flags to the given flags
 
-The flags are:
+The flags are::
 
   p    enables the pr_debug() callsite.
   f    Include the function name in the printed message
@@ -216,14 +222,14 @@ The flags are:
   t    Include thread ID in messages not generated from interrupt context
   _    No flags are set. (Or'd with others on input)
 
-For print_hex_dump_debug() and print_hex_dump_bytes(), only 'p' flag
+For ``print_hex_dump_debug()`` and ``print_hex_dump_bytes()``, only ``p`` flag
 have meaning, other flags ignored.
 
-For display, the flags are preceded by '='
+For display, the flags are preceded by ``=``
 (mnemonic: what the flags are currently equal to).
 
-Note the regexp ^[-+=][flmpt_]+$ matches a flags specification.
-To clear all flags at once, use "=_" or "-flmpt".
+Note the regexp ``^[-+=][flmpt_]+$`` matches a flags specification.
+To clear all flags at once, use ``=_`` or ``-flmpt``.
 
 
 Debug messages during Boot Process
@@ -231,107 +237,114 @@ Debug messages during Boot Process
 
 To activate debug messages for core code and built-in modules during
 the boot process, even before userspace and debugfs exists, use
-dyndbg="QUERY", module.dyndbg="QUERY", or ddebug_query="QUERY"
-(ddebug_query is obsoleted by dyndbg, and deprecated).  QUERY follows
+``dyndbg="QUERY"``, ``module.dyndbg="QUERY"``, or ``ddebug_query="QUERY"``
+(``ddebug_query`` is obsoleted by ``dyndbg``, and deprecated).  QUERY follows
 the syntax described above, but must not exceed 1023 characters.  Your
 bootloader may impose lower limits.
 
-These dyndbg params are processed just after the ddebug tables are
+These ``dyndbg`` params are processed just after the ddebug tables are
 processed, as part of the arch_initcall.  Thus you can enable debug
 messages in all code run after this arch_initcall via this boot
 parameter.
 
-On an x86 system for example ACPI enablement is a subsys_initcall and
+On an x86 system for example ACPI enablement is a subsys_initcall and::
+
    dyndbg="file ec.c +p"
+
 will show early Embedded Controller transactions during ACPI setup if
 your machine (typically a laptop) has an Embedded Controller.
 PCI (or other devices) initialization also is a hot candidate for using
 this boot parameter for debugging purposes.
 
-If foo module is not built-in, foo.dyndbg will still be processed at
+If ``foo`` module is not built-in, ``foo.dyndbg`` will still be processed at
 boot time, without effect, but will be reprocessed when module is
-loaded later.  dyndbg_query= and bare dyndbg= are only processed at
+loaded later. ``dyndbg_query=`` and bare ``dyndbg=`` are only processed at
 boot.
 
 
 Debug Messages at Module Initialization Time
 ============================================
 
-When "modprobe foo" is called, modprobe scans /proc/cmdline for
-foo.params, strips "foo.", and passes them to the kernel along with
-params given in modprobe args or /etc/modprob.d/*.conf files,
+When ``modprobe foo`` is called, modprobe scans ``/proc/cmdline`` for
+``foo.params``, strips ``foo.``, and passes them to the kernel along with
+params given in modprobe args or ``/etc/modprob.d/*.conf`` files,
 in the following order:
 
-1. # parameters given via /etc/modprobe.d/*.conf
+1. parameters given via ``/etc/modprobe.d/*.conf``::
+
 	options foo dyndbg=+pt
 	options foo dyndbg # defaults to +p
 
-2. # foo.dyndbg as given in boot args, "foo." is stripped and passed
+2. ``foo.dyndbg`` as given in boot args, ``foo.`` is stripped and passed::
+
 	foo.dyndbg=" func bar +p; func buz +mp"
 
-3. # args to modprobe
+3. args to modprobe::
+
 	modprobe foo dyndbg==pmf # override previous settings
 
-These dyndbg queries are applied in order, with last having final say.
-This allows boot args to override or modify those from /etc/modprobe.d
+These ``dyndbg`` queries are applied in order, with last having final say.
+This allows boot args to override or modify those from ``/etc/modprobe.d``
 (sensible, since 1 is system wide, 2 is kernel or boot specific), and
 modprobe args to override both.
 
-In the foo.dyndbg="QUERY" form, the query must exclude "module foo".
-"foo" is extracted from the param-name, and applied to each query in
-"QUERY", and only 1 match-spec of each type is allowed.
+In the ``foo.dyndbg="QUERY"`` form, the query must exclude ``module foo``.
+``foo`` is extracted from the param-name, and applied to each query in
+``QUERY``, and only 1 match-spec of each type is allowed.
 
-The dyndbg option is a "fake" module parameter, which means:
+The ``dyndbg`` option is a "fake" module parameter, which means:
 
 - modules do not need to define it explicitly
 - every module gets it tacitly, whether they use pr_debug or not
-- it doesn't appear in /sys/module/$module/parameters/
-  To see it, grep the control file, or inspect /proc/cmdline.
+- it doesn't appear in ``/sys/module/$module/parameters/``
+  To see it, grep the control file, or inspect ``/proc/cmdline.``
 
-For CONFIG_DYNAMIC_DEBUG kernels, any settings given at boot-time (or
-enabled by -DDEBUG flag during compilation) can be disabled later via
-the sysfs interface if the debug messages are no longer needed:
+For ``CONFIG_DYNAMIC_DEBUG`` kernels, any settings given at boot-time (or
+enabled by ``-DDEBUG`` flag during compilation) can be disabled later via
+the sysfs interface if the debug messages are no longer needed::
 
    echo "module module_name -p" > <debugfs>/dynamic_debug/control
 
 Examples
 ========
 
-// enable the message at line 1603 of file svcsock.c
-nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
+::
+
+  // enable the message at line 1603 of file svcsock.c
+  nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
 				<debugfs>/dynamic_debug/control
 
-// enable all the messages in file svcsock.c
-nullarbor:~ # echo -n 'file svcsock.c +p' >
+  // enable all the messages in file svcsock.c
+  nullarbor:~ # echo -n 'file svcsock.c +p' >
 				<debugfs>/dynamic_debug/control
 
-// enable all the messages in the NFS server module
-nullarbor:~ # echo -n 'module nfsd +p' >
+  // enable all the messages in the NFS server module
+  nullarbor:~ # echo -n 'module nfsd +p' >
 				<debugfs>/dynamic_debug/control
 
-// enable all 12 messages in the function svc_process()
-nullarbor:~ # echo -n 'func svc_process +p' >
+  // enable all 12 messages in the function svc_process()
+  nullarbor:~ # echo -n 'func svc_process +p' >
 				<debugfs>/dynamic_debug/control
 
-// disable all 12 messages in the function svc_process()
-nullarbor:~ # echo -n 'func svc_process -p' >
+  // disable all 12 messages in the function svc_process()
+  nullarbor:~ # echo -n 'func svc_process -p' >
 				<debugfs>/dynamic_debug/control
 
-// enable messages for NFS calls READ, READLINK, READDIR and READDIR+.
-nullarbor:~ # echo -n 'format "nfsd: READ" +p' >
+  // enable messages for NFS calls READ, READLINK, READDIR and READDIR+.
+  nullarbor:~ # echo -n 'format "nfsd: READ" +p' >
 				<debugfs>/dynamic_debug/control
 
-// enable messages in files of which the paths include string "usb"
-nullarbor:~ # echo -n '*usb* +p' > <debugfs>/dynamic_debug/control
+  // enable messages in files of which the paths include string "usb"
+  nullarbor:~ # echo -n '*usb* +p' > <debugfs>/dynamic_debug/control
 
-// enable all messages
-nullarbor:~ # echo -n '+p' > <debugfs>/dynamic_debug/control
+  // enable all messages
+  nullarbor:~ # echo -n '+p' > <debugfs>/dynamic_debug/control
 
-// add module, function to all enabled messages
-nullarbor:~ # echo -n '+mf' > <debugfs>/dynamic_debug/control
+  // add module, function to all enabled messages
+  nullarbor:~ # echo -n '+mf' > <debugfs>/dynamic_debug/control
 
-// boot-args example, with newlines and comments for readability
-Kernel command line: ...
+  // boot-args example, with newlines and comments for readability
+  Kernel command line: ...
     // see whats going on in dyndbg=value processing
     dynamic_debug.verbose=1
     // enable pr_debugs in 2 builtins, #cmt is stripped