Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 7c8c6b97 编写于 作者: P Paul Mackerras
浏览文件
操作

powerpc: Merge lmb.c and make MM initialization use it. 

This also creates merged versions of do_init_bootmem, paging_init
and mem_init and moves them to arch/powerpc/mm/mem.c.  It gets rid
of the mem_pieces stuff.

I made memory_limit a parameter to lmb_enforce_memory_limit rather
than a global referenced by that function.  This will require some
small changes to ppc64 if we want to continue building ARCH=ppc64
using the merged lmb.c.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 9b6b563c
显示空白变更内容
内联 并排
Showing with 520 addition and 707 deletion
arch/powerpc/mm/Makefile
浏览文件 @ 7c8c6b97
......@@ -2,9 +2,9 @@
# Makefile for the linux ppc-specific parts of the memory manager.
#
obj-y := fault.o mem.o
obj-y := fault.o mem.o lmb.o
obj-$(CONFIG_PPC32) += init.o pgtable.o mmu_context.o \
mem_pieces.o tlb.o
tlb.o
obj-$(CONFIG_PPC64) += init64.o pgtable64.o mmu_context64.o
obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu.o hash_32.o
obj-$(CONFIG_40x) += 4xx_mmu.o
......
arch/powerpc/mm/init.c
浏览文件 @ 7c8c6b97
......@@ -45,8 +45,9 @@
#include <asm/tlb.h>
#include <asm/bootinfo.h>
#include <asm/prom.h>
#include <asm/lmb.h>
#include <asm/sections.h>
#include "mem_pieces.h"
#include "mmu_decl.h"
#if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
......@@ -65,17 +66,11 @@ unsigned long total_lowmem;
unsigned long ppc_memstart;
unsigned long ppc_memoffset = PAGE_OFFSET;
int mem_init_done;
int init_bootmem_done;
int boot_mapsize;
#ifdef CONFIG_PPC_PMAC
unsigned long agp_special_page;
#endif
extern char _end[];
extern char etext[], _stext[];
extern char __init_begin, __init_end;
#ifdef CONFIG_HIGHMEM
pte_t *kmap_pte;
pgprot_t kmap_prot;
......@@ -85,15 +80,15 @@ EXPORT_SYMBOL(kmap_pte);
#endif
void MMU_init(void);
void set_phys_avail(unsigned long total_ram);
/* XXX should be in current.h -- paulus */
extern struct task_struct *current_set[NR_CPUS];
char *klimit = _end;
struct mem_pieces phys_avail;
struct device_node *memory_node;
extern int init_bootmem_done;
/*
* this tells the system to map all of ram with the segregs
* (i.e. page tables) instead of the bats.
......@@ -102,84 +97,14 @@ struct device_node *memory_node;
int __map_without_bats;
int __map_without_ltlbs;
/* max amount of RAM to use */
unsigned long __max_memory;
/* max amount of low RAM to map in */
unsigned long __max_low_memory = MAX_LOW_MEM;
/*
* Read in a property describing some pieces of memory.
* limit of what is accessible with initial MMU setup -
* 256MB usually, but only 16MB on 601.
*/
static int __init get_mem_prop(char *name, struct mem_pieces *mp)
{
struct reg_property *rp;
int i, s;
unsigned int *ip;
int nac = prom_n_addr_cells(memory_node);
int nsc = prom_n_size_cells(memory_node);
ip = (unsigned int *) get_property(memory_node, name, &s);
if (ip == NULL) {
printk(KERN_ERR "error: couldn't get %s property on /memory\n",
name);
return 0;
}
s /= (nsc + nac) * 4;
rp = mp->regions;
for (i = 0; i < s; ++i, ip += nac+nsc) {
if (nac >= 2 && ip[nac-2] != 0)
continue;
rp->address = ip[nac-1];
if (nsc >= 2 && ip[nac+nsc-2] != 0)
rp->size = ~0U;
else
rp->size = ip[nac+nsc-1];
++rp;
}
mp->n_regions = rp - mp->regions;
/* Make sure the pieces are sorted. */
mem_pieces_sort(mp);
mem_pieces_coalesce(mp);
return 1;
}
/*
* Collect information about physical RAM and which pieces are
* already in use from the device tree.
*/
unsigned long __init find_end_of_memory(void)
{
unsigned long a, total;
struct mem_pieces phys_mem;
/*
* Find out where physical memory is, and check that it
* starts at 0 and is contiguous. It seems that RAM is
* always physically contiguous on Power Macintoshes.
*
* Supporting discontiguous physical memory isn't hard,
* it just makes the virtual <-> physical mapping functions
* more complicated (or else you end up wasting space
* in mem_map).
*/
memory_node = find_devices("memory");
if (memory_node == NULL || !get_mem_prop("reg", &phys_mem)
|| phys_mem.n_regions == 0)
panic("No RAM??");
a = phys_mem.regions[0].address;
if (a != 0)
panic("RAM doesn't start at physical address 0");
total = phys_mem.regions[0].size;
if (phys_mem.n_regions > 1) {
printk("RAM starting at 0x%x is not contiguous\n",
phys_mem.regions[1].address);
printk("Using RAM from 0 to 0x%lx\n", total-1);
}
return total;
}
unsigned long __initial_memory_limit = 0x10000000;
/*
* Check for command-line options that affect what MMU_init will do.
......@@ -194,27 +119,6 @@ void MMU_setup(void)
if (strstr(cmd_line, "noltlbs")) {
__map_without_ltlbs = 1;
}
/* Look for mem= option on command line */
if (strstr(cmd_line, "mem=")) {
char *p, *q;
unsigned long maxmem = 0;
for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
q = p + 4;
if (p > cmd_line && p[-1] != ' ')
continue;
maxmem = simple_strtoul(q, &q, 0);
if (*q == 'k' || *q == 'K') {
maxmem <<= 10;
++q;
} else if (*q == 'm' || *q == 'M') {
maxmem <<= 20;
++q;
}
}
__max_memory = maxmem;
}
}
/*
......@@ -227,23 +131,22 @@ void __init MMU_init(void)
if (ppc_md.progress)
ppc_md.progress("MMU:enter", 0x111);
/* 601 can only access 16MB at the moment */
if (PVR_VER(mfspr(SPRN_PVR)) == 1)
__initial_memory_limit = 0x01000000;
/* parse args from command line */
MMU_setup();
/*
* Figure out how much memory we have, how much
* is lowmem, and how much is highmem. If we were
* passed the total memory size from the bootloader,
* just use it.
*/
if (boot_mem_size)
total_memory = boot_mem_size;
else
total_memory = find_end_of_memory();
if (lmb.memory.cnt > 1) {
lmb.memory.cnt = 1;
lmb_analyze();
printk(KERN_WARNING "Only using first contiguous memory region");
}
if (__max_memory && total_memory > __max_memory)
total_memory = __max_memory;
total_memory = lmb_end_of_DRAM();
total_lowmem = total_memory;
#ifdef CONFIG_FSL_BOOKE
/* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
* entries, so we need to adjust lowmem to match the amount we can map
......@@ -256,7 +159,6 @@ void __init MMU_init(void)
total_memory = total_lowmem;
#endif /* CONFIG_HIGHMEM */
}
set_phys_avail(total_lowmem);
/* Initialize the MMU hardware */
if (ppc_md.progress)
......@@ -303,7 +205,8 @@ void __init *early_get_page(void)
if (init_bootmem_done) {
p = alloc_bootmem_pages(PAGE_SIZE);
} else {
p = mem_pieces_find(PAGE_SIZE, PAGE_SIZE);
p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
__initial_memory_limit));
}
return p;
}
......@@ -353,229 +256,3 @@ void free_initrd_mem(unsigned long start, unsigned long end)
}
}
#endif
/*
* Initialize the bootmem system and give it all the memory we
* have available.
*/
void __init do_init_bootmem(void)
{
unsigned long start, size;
int i;
/*
* Find an area to use for the bootmem bitmap.
* We look for the first area which is at least
* 128kB in length (128kB is enough for a bitmap
* for 4GB of memory, using 4kB pages), plus 1 page
* (in case the address isn't page-aligned).
*/
start = 0;
size = 0;
for (i = 0; i < phys_avail.n_regions; ++i) {
unsigned long a = phys_avail.regions[i].address;
unsigned long s = phys_avail.regions[i].size;
if (s <= size)
continue;
start = a;
size = s;
if (s >= 33 * PAGE_SIZE)
break;
}
start = PAGE_ALIGN(start);
min_low_pfn = start >> PAGE_SHIFT;
max_low_pfn = (PPC_MEMSTART + total_lowmem) >> PAGE_SHIFT;
max_pfn = (PPC_MEMSTART + total_memory) >> PAGE_SHIFT;
boot_mapsize = init_bootmem_node(&contig_page_data, min_low_pfn,
PPC_MEMSTART >> PAGE_SHIFT,
max_low_pfn);
/* remove the bootmem bitmap from the available memory */
mem_pieces_remove(&phys_avail, start, boot_mapsize, 1);
/* add everything in phys_avail into the bootmem map */
for (i = 0; i < phys_avail.n_regions; ++i)
free_bootmem(phys_avail.regions[i].address,
phys_avail.regions[i].size);
init_bootmem_done = 1;
}
/*
* paging_init() sets up the page tables - in fact we've already done this.
*/
void __init paging_init(void)
{
unsigned long zones_size[MAX_NR_ZONES], i;
#ifdef CONFIG_HIGHMEM
map_page(PKMAP_BASE, 0, 0); /* XXX gross */
pkmap_page_table = pte_offset_kernel(pmd_offset(pgd_offset_k
(PKMAP_BASE), PKMAP_BASE), PKMAP_BASE);
map_page(KMAP_FIX_BEGIN, 0, 0); /* XXX gross */
kmap_pte = pte_offset_kernel(pmd_offset(pgd_offset_k
(KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN);
kmap_prot = PAGE_KERNEL;
#endif /* CONFIG_HIGHMEM */
/*
* All pages are DMA-able so we put them all in the DMA zone.
*/
zones_size[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
for (i = 1; i < MAX_NR_ZONES; i++)
zones_size[i] = 0;
#ifdef CONFIG_HIGHMEM
zones_size[ZONE_HIGHMEM] = (total_memory - total_lowmem) >> PAGE_SHIFT;
#endif /* CONFIG_HIGHMEM */
free_area_init(zones_size);
}
void __init mem_init(void)
{
unsigned long addr;
int codepages = 0;
int datapages = 0;
int initpages = 0;
#ifdef CONFIG_HIGHMEM
unsigned long highmem_mapnr;
highmem_mapnr = total_lowmem >> PAGE_SHIFT;
#endif /* CONFIG_HIGHMEM */
max_mapnr = total_memory >> PAGE_SHIFT;
high_memory = (void *) __va(PPC_MEMSTART + total_lowmem);
num_physpages = max_mapnr; /* RAM is assumed contiguous */
totalram_pages += free_all_bootmem();
#ifdef CONFIG_BLK_DEV_INITRD
/* if we are booted from BootX with an initial ramdisk,
make sure the ramdisk pages aren't reserved. */
if (initrd_start) {
for (addr = initrd_start; addr < initrd_end; addr += PAGE_SIZE)
ClearPageReserved(virt_to_page(addr));
}
#endif /* CONFIG_BLK_DEV_INITRD */
#ifdef CONFIG_PPC_OF
/* mark the RTAS pages as reserved */
if ( rtas_data )
for (addr = (ulong)__va(rtas_data);
addr < PAGE_ALIGN((ulong)__va(rtas_data)+rtas_size) ;
addr += PAGE_SIZE)
SetPageReserved(virt_to_page(addr));
#endif
#ifdef CONFIG_PPC_PMAC
if (agp_special_page)
SetPageReserved(virt_to_page(agp_special_page));
#endif
for (addr = PAGE_OFFSET; addr < (unsigned long)high_memory;
addr += PAGE_SIZE) {
if (!PageReserved(virt_to_page(addr)))
continue;
if (addr < (ulong) etext)
codepages++;
else if (addr >= (unsigned long)&__init_begin
&& addr < (unsigned long)&__init_end)
initpages++;
else if (addr < (ulong) klimit)
datapages++;
}
#ifdef CONFIG_HIGHMEM
{
unsigned long pfn;
for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
struct page *page = mem_map + pfn;
ClearPageReserved(page);
set_page_count(page, 1);
__free_page(page);
totalhigh_pages++;
}
totalram_pages += totalhigh_pages;
}
#endif /* CONFIG_HIGHMEM */
printk("Memory: %luk available (%dk kernel code, %dk data, %dk init, %ldk highmem)\n",
(unsigned long)nr_free_pages()<< (PAGE_SHIFT-10),
codepages<< (PAGE_SHIFT-10), datapages<< (PAGE_SHIFT-10),
initpages<< (PAGE_SHIFT-10),
(unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
#ifdef CONFIG_PPC_PMAC
if (agp_special_page)
printk(KERN_INFO "AGP special page: 0x%08lx\n", agp_special_page);
#endif
mem_init_done = 1;
}
/*
* Set phys_avail to the amount of physical memory,
* less the kernel text/data/bss.
*/
void __init
set_phys_avail(unsigned long total_memory)
{
unsigned long kstart, ksize;
/*
* Initially, available physical memory is equivalent to all
* physical memory.
*/
phys_avail.regions[0].address = PPC_MEMSTART;
phys_avail.regions[0].size = total_memory;
phys_avail.n_regions = 1;
/*
* Map out the kernel text/data/bss from the available physical
* memory.
*/
kstart = __pa(_stext); /* should be 0 */
ksize = PAGE_ALIGN(klimit - _stext);
mem_pieces_remove(&phys_avail, kstart, ksize, 0);
mem_pieces_remove(&phys_avail, 0, 0x4000, 0);
#if defined(CONFIG_BLK_DEV_INITRD)
/* Remove the init RAM disk from the available memory. */
if (initrd_start) {
mem_pieces_remove(&phys_avail, __pa(initrd_start),
initrd_end - initrd_start, 1);
}
#endif /* CONFIG_BLK_DEV_INITRD */
#ifdef CONFIG_PPC_OF
/* remove the RTAS pages from the available memory */
if (rtas_data)
mem_pieces_remove(&phys_avail, rtas_data, rtas_size, 1);
#endif
#ifdef CONFIG_PPC_PMAC
/* Because of some uninorth weirdness, we need a page of
* memory as high as possible (it must be outside of the
* bus address seen as the AGP aperture). It will be used
* by the r128 DRM driver
*
* FIXME: We need to make sure that page doesn't overlap any of the\
* above. This could be done by improving mem_pieces_find to be able
* to do a backward search from the end of the list.
*/
if (_machine == _MACH_Pmac && find_devices("uni-north-agp")) {
agp_special_page = (total_memory - PAGE_SIZE);
mem_pieces_remove(&phys_avail, agp_special_page, PAGE_SIZE, 0);
agp_special_page = (unsigned long)__va(agp_special_page);
}
#endif /* CONFIG_PPC_PMAC */
}
/* Mark some memory as reserved by removing it from phys_avail. */
void __init reserve_phys_mem(unsigned long start, unsigned long size)
{
mem_pieces_remove(&phys_avail, start, size, 1);
}
arch/powerpc/mm/init64.c
浏览文件 @ 7c8c6b97
......@@ -166,77 +166,6 @@ void free_initrd_mem(unsigned long start, unsigned long end)
}
#endif
/*
* Initialize the bootmem system and give it all the memory we
* have available.
*/
#ifndef CONFIG_NEED_MULTIPLE_NODES
void __init do_init_bootmem(void)
{
unsigned long i;
unsigned long start, bootmap_pages;
unsigned long total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT;
int boot_mapsize;
/*
* Find an area to use for the bootmem bitmap. Calculate the size of
* bitmap required as (Total Memory) / PAGE_SIZE / BITS_PER_BYTE.
* Add 1 additional page in case the address isn't page-aligned.
*/
bootmap_pages = bootmem_bootmap_pages(total_pages);
start = lmb_alloc(bootmap_pages<<PAGE_SHIFT, PAGE_SIZE);
BUG_ON(!start);
boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages);
max_pfn = max_low_pfn;
/* Add all physical memory to the bootmem map, mark each area
* present.
*/
for (i=0; i < lmb.memory.cnt; i++)
free_bootmem(lmb.memory.region[i].base,
lmb_size_bytes(&lmb.memory, i));
/* reserve the sections we're already using */
for (i=0; i < lmb.reserved.cnt; i++)
reserve_bootmem(lmb.reserved.region[i].base,
lmb_size_bytes(&lmb.reserved, i));
for (i=0; i < lmb.memory.cnt; i++)
memory_present(0, lmb_start_pfn(&lmb.memory, i),
lmb_end_pfn(&lmb.memory, i));
}
/*
* paging_init() sets up the page tables - in fact we've already done this.
*/
void __init paging_init(void)
{
unsigned long zones_size[MAX_NR_ZONES];
unsigned long zholes_size[MAX_NR_ZONES];
unsigned long total_ram = lmb_phys_mem_size();
unsigned long top_of_ram = lmb_end_of_DRAM();
printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
top_of_ram, total_ram);
printk(KERN_INFO "Memory hole size: %ldMB\n",
(top_of_ram - total_ram) >> 20);
/*
* All pages are DMA-able so we put them all in the DMA zone.
*/
memset(zones_size, 0, sizeof(zones_size));
memset(zholes_size, 0, sizeof(zholes_size));
zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT;
free_area_init_node(0, NODE_DATA(0), zones_size,
__pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size);
}
#endif /* ! CONFIG_NEED_MULTIPLE_NODES */
static struct kcore_list kcore_vmem;
static int __init setup_kcore(void)
......@@ -264,61 +193,6 @@ static int __init setup_kcore(void)
}
module_init(setup_kcore);
void __init mem_init(void)
{
#ifdef CONFIG_NEED_MULTIPLE_NODES
int nid;
#endif
pg_data_t *pgdat;
unsigned long i;
struct page *page;
unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize;
num_physpages = max_low_pfn; /* RAM is assumed contiguous */
high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
#ifdef CONFIG_NEED_MULTIPLE_NODES
for_each_online_node(nid) {
if (NODE_DATA(nid)->node_spanned_pages != 0) {
printk("freeing bootmem node %x\n", nid);
totalram_pages +=
free_all_bootmem_node(NODE_DATA(nid));
}
}
#else
max_mapnr = num_physpages;
totalram_pages += free_all_bootmem();
#endif
for_each_pgdat(pgdat) {
for (i = 0; i < pgdat->node_spanned_pages; i++) {
page = pgdat_page_nr(pgdat, i);
if (PageReserved(page))
reservedpages++;
}
}
codesize = (unsigned long)&_etext - (unsigned long)&_stext;
initsize = (unsigned long)&__init_end - (unsigned long)&__init_begin;
datasize = (unsigned long)&_edata - (unsigned long)&__init_end;
bsssize = (unsigned long)&__bss_stop - (unsigned long)&__bss_start;
printk(KERN_INFO "Memory: %luk/%luk available (%luk kernel code, "
"%luk reserved, %luk data, %luk bss, %luk init)\n",
(unsigned long)nr_free_pages() << (PAGE_SHIFT-10),
num_physpages << (PAGE_SHIFT-10),
codesize >> 10,
reservedpages << (PAGE_SHIFT-10),
datasize >> 10,
bsssize >> 10,
initsize >> 10);
mem_init_done = 1;
/* Initialize the vDSO */
vdso_init();
}
void __iomem * reserve_phb_iospace(unsigned long size)
{
void __iomem *virt_addr;
......
arch/powerpc/mm/lmb.c 0 → 100644
浏览文件 @ 7c8c6b97
/*
* Procedures for maintaining information about logical memory blocks.
*
* Peter Bergner, IBM Corp. June 2001.
* Copyright (C) 2001 Peter Bergner.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/bitops.h>
#include <asm/types.h>
#include <asm/page.h>
#include <asm/prom.h>
#include <asm/lmb.h>
#ifdef CONFIG_PPC32
#include "mmu_decl.h" /* for __max_low_memory */
#endif
struct lmb lmb;
#undef DEBUG
void lmb_dump_all(void)
{
#ifdef DEBUG
unsigned long i;
udbg_printf("lmb_dump_all:\n");
udbg_printf(" memory.cnt = 0x%lx\n",
lmb.memory.cnt);
udbg_printf(" memory.size = 0x%lx\n",
lmb.memory.size);
for (i=0; i < lmb.memory.cnt ;i++) {
udbg_printf(" memory.region[0x%x].base = 0x%lx\n",
i, lmb.memory.region[i].base);
udbg_printf(" .size = 0x%lx\n",
lmb.memory.region[i].size);
}
udbg_printf("\n reserved.cnt = 0x%lx\n",
lmb.reserved.cnt);
udbg_printf(" reserved.size = 0x%lx\n",
lmb.reserved.size);
for (i=0; i < lmb.reserved.cnt ;i++) {
udbg_printf(" reserved.region[0x%x].base = 0x%lx\n",
i, lmb.reserved.region[i].base);
udbg_printf(" .size = 0x%lx\n",
lmb.reserved.region[i].size);
}
#endif /* DEBUG */
}
static unsigned long __init lmb_addrs_overlap(unsigned long base1,
unsigned long size1, unsigned long base2, unsigned long size2)
{
return ((base1 < (base2+size2)) && (base2 < (base1+size1)));
}
static long __init lmb_addrs_adjacent(unsigned long base1, unsigned long size1,
unsigned long base2, unsigned long size2)
{
if (base2 == base1 + size1)
return 1;
else if (base1 == base2 + size2)
return -1;
return 0;
}
static long __init lmb_regions_adjacent(struct lmb_region *rgn,
unsigned long r1, unsigned long r2)
{
unsigned long base1 = rgn->region[r1].base;
unsigned long size1 = rgn->region[r1].size;
unsigned long base2 = rgn->region[r2].base;
unsigned long size2 = rgn->region[r2].size;
return lmb_addrs_adjacent(base1, size1, base2, size2);
}
/* Assumption: base addr of region 1 < base addr of region 2 */
static void __init lmb_coalesce_regions(struct lmb_region *rgn,
unsigned long r1, unsigned long r2)
{
unsigned long i;
rgn->region[r1].size += rgn->region[r2].size;
for (i=r2; i < rgn->cnt-1; i++) {
rgn->region[i].base = rgn->region[i+1].base;
rgn->region[i].size = rgn->region[i+1].size;
}
rgn->cnt--;
}
/* This routine called with relocation disabled. */
void __init lmb_init(void)
{
/* Create a dummy zero size LMB which will get coalesced away later.
* This simplifies the lmb_add() code below...
*/
lmb.memory.region[0].base = 0;
lmb.memory.region[0].size = 0;
lmb.memory.cnt = 1;
/* Ditto. */
lmb.reserved.region[0].base = 0;
lmb.reserved.region[0].size = 0;
lmb.reserved.cnt = 1;
}
/* This routine may be called with relocation disabled. */
void __init lmb_analyze(void)
{
int i;
lmb.memory.size = 0;
for (i = 0; i < lmb.memory.cnt; i++)
lmb.memory.size += lmb.memory.region[i].size;
}
/* This routine called with relocation disabled. */
static long __init lmb_add_region(struct lmb_region *rgn, unsigned long base,
unsigned long size)
{
unsigned long i, coalesced = 0;
long adjacent;
/* First try and coalesce this LMB with another. */
for (i=0; i < rgn->cnt; i++) {
unsigned long rgnbase = rgn->region[i].base;
unsigned long rgnsize = rgn->region[i].size;
adjacent = lmb_addrs_adjacent(base,size,rgnbase,rgnsize);
if ( adjacent > 0 ) {
rgn->region[i].base -= size;
rgn->region[i].size += size;
coalesced++;
break;
}
else if ( adjacent < 0 ) {
rgn->region[i].size += size;
coalesced++;
break;
}
}
if ((i < rgn->cnt-1) && lmb_regions_adjacent(rgn, i, i+1) ) {
lmb_coalesce_regions(rgn, i, i+1);
coalesced++;
}
if (coalesced)
return coalesced;
if (rgn->cnt >= MAX_LMB_REGIONS)
return -1;
/* Couldn't coalesce the LMB, so add it to the sorted table. */
for (i = rgn->cnt-1; i >= 0; i--) {
if (base < rgn->region[i].base) {
rgn->region[i+1].base = rgn->region[i].base;
rgn->region[i+1].size = rgn->region[i].size;
} else {
rgn->region[i+1].base = base;
rgn->region[i+1].size = size;
break;
}
}
rgn->cnt++;
return 0;
}
/* This routine may be called with relocation disabled. */
long __init lmb_add(unsigned long base, unsigned long size)
{
struct lmb_region *_rgn = &(lmb.memory);
/* On pSeries LPAR systems, the first LMB is our RMO region. */
if (base == 0)
lmb.rmo_size = size;
return lmb_add_region(_rgn, base, size);
}
long __init lmb_reserve(unsigned long base, unsigned long size)
{
struct lmb_region *_rgn = &(lmb.reserved);
return lmb_add_region(_rgn, base, size);
}
long __init lmb_overlaps_region(struct lmb_region *rgn, unsigned long base,
unsigned long size)
{
unsigned long i;
for (i=0; i < rgn->cnt; i++) {
unsigned long rgnbase = rgn->region[i].base;
unsigned long rgnsize = rgn->region[i].size;
if ( lmb_addrs_overlap(base,size,rgnbase,rgnsize) ) {
break;
}
}
return (i < rgn->cnt) ? i : -1;
}
unsigned long __init lmb_alloc(unsigned long size, unsigned long align)
{
return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE);
}
unsigned long __init lmb_alloc_base(unsigned long size, unsigned long align,
unsigned long max_addr)
{
long i, j;
unsigned long base = 0;
#ifdef CONFIG_PPC32
/* On 32-bit, make sure we allocate lowmem */
if (max_addr == LMB_ALLOC_ANYWHERE)
max_addr = __max_low_memory;
#endif
for (i = lmb.memory.cnt-1; i >= 0; i--) {
unsigned long lmbbase = lmb.memory.region[i].base;
unsigned long lmbsize = lmb.memory.region[i].size;
if (max_addr == LMB_ALLOC_ANYWHERE)
base = _ALIGN_DOWN(lmbbase + lmbsize - size, align);
else if (lmbbase < max_addr) {
base = min(lmbbase + lmbsize, max_addr);
base = _ALIGN_DOWN(base - size, align);
} else
continue;
while ((lmbbase <= base) &&
((j = lmb_overlaps_region(&lmb.reserved, base, size)) >= 0) )
base = _ALIGN_DOWN(lmb.reserved.region[j].base - size,
align);
if ((base != 0) && (lmbbase <= base))
break;
}
if (i < 0)
return 0;
lmb_add_region(&lmb.reserved, base, size);
return base;
}
/* You must call lmb_analyze() before this. */
unsigned long __init lmb_phys_mem_size(void)
{
return lmb.memory.size;
}
unsigned long __init lmb_end_of_DRAM(void)
{
int idx = lmb.memory.cnt - 1;
return (lmb.memory.region[idx].base + lmb.memory.region[idx].size);
}
/*
* Truncate the lmb list to memory_limit if it's set
* You must call lmb_analyze() after this.
*/
void __init lmb_enforce_memory_limit(unsigned long memory_limit)
{
unsigned long i, limit;
if (! memory_limit)
return;
limit = memory_limit;
for (i = 0; i < lmb.memory.cnt; i++) {
if (limit > lmb.memory.region[i].size) {
limit -= lmb.memory.region[i].size;
continue;
}
lmb.memory.region[i].size = limit;
lmb.memory.cnt = i + 1;
break;
}
}
arch/powerpc/mm/mem.c
浏览文件 @ 7c8c6b97
......@@ -45,8 +45,9 @@
#include <asm/tlb.h>
#include <asm/bootinfo.h>
#include <asm/prom.h>
#include <asm/lmb.h>
#include <asm/sections.h>
#include "mem_pieces.h"
#include "mmu_decl.h"
#ifndef CPU_FTR_COHERENT_ICACHE
......@@ -54,6 +55,9 @@
#define CPU_FTR_NOEXECUTE 0
#endif
int init_bootmem_done;
int mem_init_done;
/*
* This is called by /dev/mem to know if a given address has to
* be mapped non-cacheable or not
......@@ -130,6 +134,185 @@ void show_mem(void)
printk("%ld pages swap cached\n", cached);
}
/*
* Initialize the bootmem system and give it all the memory we
* have available. If we are using highmem, we only put the
* lowmem into the bootmem system.
*/
#ifndef CONFIG_NEED_MULTIPLE_NODES
void __init do_init_bootmem(void)
{
unsigned long i;
unsigned long start, bootmap_pages;
unsigned long total_pages;
int boot_mapsize;
max_pfn = total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT;
#ifdef CONFIG_HIGHMEM
total_pages = total_lowmem >> PAGE_SHIFT;
#endif
/*
* Find an area to use for the bootmem bitmap. Calculate the size of
* bitmap required as (Total Memory) / PAGE_SIZE / BITS_PER_BYTE.
* Add 1 additional page in case the address isn't page-aligned.
*/
bootmap_pages = bootmem_bootmap_pages(total_pages);
start = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
BUG_ON(!start);
boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages);
/* Add all physical memory to the bootmem map, mark each area
* present.
*/
for (i = 0; i < lmb.memory.cnt; i++) {
unsigned long base = lmb.memory.region[i].base;
unsigned long size = lmb_size_bytes(&lmb.memory, i);
#ifdef CONFIG_HIGHMEM
if (base >= total_lowmem)
continue;
if (base + size > total_lowmem)
size = total_lowmem - base;
#endif
free_bootmem(base, size);
}
/* reserve the sections we're already using */
for (i = 0; i < lmb.reserved.cnt; i++)
reserve_bootmem(lmb.reserved.region[i].base,
lmb_size_bytes(&lmb.reserved, i));
/* XXX need to clip this if using highmem? */
for (i = 0; i < lmb.memory.cnt; i++)
memory_present(0, lmb_start_pfn(&lmb.memory, i),
lmb_end_pfn(&lmb.memory, i));
init_bootmem_done = 1;
}
/*
* paging_init() sets up the page tables - in fact we've already done this.
*/
void __init paging_init(void)
{
unsigned long zones_size[MAX_NR_ZONES];
unsigned long zholes_size[MAX_NR_ZONES];
unsigned long total_ram = lmb_phys_mem_size();
unsigned long top_of_ram = lmb_end_of_DRAM();
#ifdef CONFIG_HIGHMEM
map_page(PKMAP_BASE, 0, 0); /* XXX gross */
pkmap_page_table = pte_offset_kernel(pmd_offset(pgd_offset_k
(PKMAP_BASE), PKMAP_BASE), PKMAP_BASE);
map_page(KMAP_FIX_BEGIN, 0, 0); /* XXX gross */
kmap_pte = pte_offset_kernel(pmd_offset(pgd_offset_k
(KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN);
kmap_prot = PAGE_KERNEL;
#endif /* CONFIG_HIGHMEM */
printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
top_of_ram, total_ram);
printk(KERN_INFO "Memory hole size: %ldMB\n",
(top_of_ram - total_ram) >> 20);
/*
* All pages are DMA-able so we put them all in the DMA zone.
*/
memset(zones_size, 0, sizeof(zones_size));
memset(zholes_size, 0, sizeof(zholes_size));
zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT;
#ifdef CONFIG_HIGHMEM
zones_size[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
zones_size[ZONE_HIGHMEM] = (total_memory - total_lowmem) >> PAGE_SHIFT;
zholes_size[ZONE_HIGHMEM] = (top_of_ram - total_ram) >> PAGE_SHIFT;
#else
zones_size[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
zholes_size[ZONE_DMA] = (top_of_ram - total_ram) >> PAGE_SHIFT;
#endif /* CONFIG_HIGHMEM */
free_area_init_node(0, NODE_DATA(0), zones_size,
__pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size);
}
#endif /* ! CONFIG_NEED_MULTIPLE_NODES */
void __init mem_init(void)
{
#ifdef CONFIG_NEED_MULTIPLE_NODES
int nid;
#endif
pg_data_t *pgdat;
unsigned long i;
struct page *page;
unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize;
num_physpages = max_pfn; /* RAM is assumed contiguous */
high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
#ifdef CONFIG_NEED_MULTIPLE_NODES
for_each_online_node(nid) {
if (NODE_DATA(nid)->node_spanned_pages != 0) {
printk("freeing bootmem node %x\n", nid);
totalram_pages +=
free_all_bootmem_node(NODE_DATA(nid));
}
}
#else
max_mapnr = num_physpages;
totalram_pages += free_all_bootmem();
#endif
for_each_pgdat(pgdat) {
for (i = 0; i < pgdat->node_spanned_pages; i++) {
page = pgdat_page_nr(pgdat, i);
if (PageReserved(page))
reservedpages++;
}
}
codesize = (unsigned long)&_sdata - (unsigned long)&_stext;
datasize = (unsigned long)&__init_begin - (unsigned long)&_sdata;
initsize = (unsigned long)&__init_end - (unsigned long)&__init_begin;
bsssize = (unsigned long)&__bss_stop - (unsigned long)&__bss_start;
#ifdef CONFIG_HIGHMEM
{
unsigned long pfn, highmem_mapnr;
highmem_mapnr = total_lowmem >> PAGE_SHIFT;
for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
struct page *page = pfn_to_page(pfn);
ClearPageReserved(page);
set_page_count(page, 1);
__free_page(page);
totalhigh_pages++;
}
totalram_pages += totalhigh_pages;
printk(KERN_INFO "High memory: %luk\n",
totalhigh_pages << (PAGE_SHIFT-10));
}
#endif /* CONFIG_HIGHMEM */
printk(KERN_INFO "Memory: %luk/%luk available (%luk kernel code, "
"%luk reserved, %luk data, %luk bss, %luk init)\n",
(unsigned long)nr_free_pages() << (PAGE_SHIFT-10),
num_physpages << (PAGE_SHIFT-10),
codesize >> 10,
reservedpages << (PAGE_SHIFT-10),
datasize >> 10,
bsssize >> 10,
initsize >> 10);
mem_init_done = 1;
#ifdef CONFIG_PPC64
/* Initialize the vDSO */
vdso_init();
#endif
}
/*
* This is called when a page has been modified by the kernel.
* It just marks the page as not i-cache clean. We do the i-cache
......
arch/powerpc/mm/mem_pieces.c 已删除 100644 → 0
浏览文件 @ 9b6b563c
/*
* Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
* Changes to accommodate Power Macintoshes.
* Cort Dougan <cort@cs.nmt.edu>
* Rewrites.
* Grant Erickson <grant@lcse.umn.edu>
* General rework and split from mm/init.c.
*
* Module name: mem_pieces.c
*
* Description:
* Routines and data structures for manipulating and representing
* phyiscal memory extents (i.e. address/length pairs).
*
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/init.h>
#include <asm/page.h>
#include "mem_pieces.h"
extern struct mem_pieces phys_avail;
static void mem_pieces_print(struct mem_pieces *);
/*
* Scan a region for a piece of a given size with the required alignment.
*/
void __init *
mem_pieces_find(unsigned int size, unsigned int align)
{
int i;
unsigned a, e;
struct mem_pieces *mp = &phys_avail;
for (i = 0; i < mp->n_regions; ++i) {
a = mp->regions[i].address;
e = a + mp->regions[i].size;
a = (a + align - 1) & -align;
if (a + size <= e) {
mem_pieces_remove(mp, a, size, 1);
return (void *) __va(a);
}
}
panic("Couldn't find %u bytes at %u alignment\n", size, align);
return NULL;
}
/*
* Remove some memory from an array of pieces
*/
void __init
mem_pieces_remove(struct mem_pieces *mp, unsigned int start, unsigned int size,
int must_exist)
{
int i, j;
unsigned int end, rs, re;
struct reg_property *rp;
end = start + size;
for (i = 0, rp = mp->regions; i < mp->n_regions; ++i, ++rp) {
if (end > rp->address && start < rp->address + rp->size)
break;
}
if (i >= mp->n_regions) {
if (must_exist)
printk("mem_pieces_remove: [%x,%x) not in any region\n",
start, end);
return;
}
for (; i < mp->n_regions && end > rp->address; ++i, ++rp) {
rs = rp->address;
re = rs + rp->size;
if (must_exist && (start < rs || end > re)) {
printk("mem_pieces_remove: bad overlap [%x,%x) with",
start, end);
mem_pieces_print(mp);
must_exist = 0;
}
if (start > rs) {
rp->size = start - rs;
if (end < re) {
/* need to split this entry */
if (mp->n_regions >= MEM_PIECES_MAX)
panic("eek... mem_pieces overflow");
for (j = mp->n_regions; j > i + 1; --j)
mp->regions[j] = mp->regions[j-1];
++mp->n_regions;
rp[1].address = end;
rp[1].size = re - end;
}
} else {
if (end < re) {
rp->address = end;
rp->size = re - end;
} else {
/* need to delete this entry */
for (j = i; j < mp->n_regions - 1; ++j)
mp->regions[j] = mp->regions[j+1];
--mp->n_regions;
--i;
--rp;
}
}
}
}
static void __init
mem_pieces_print(struct mem_pieces *mp)
{
int i;
for (i = 0; i < mp->n_regions; ++i)
printk(" [%x, %x)", mp->regions[i].address,
mp->regions[i].address + mp->regions[i].size);
printk("\n");
}
void __init
mem_pieces_sort(struct mem_pieces *mp)
{
unsigned long a, s;
int i, j;
for (i = 1; i < mp->n_regions; ++i) {
a = mp->regions[i].address;
s = mp->regions[i].size;
for (j = i - 1; j >= 0; --j) {
if (a >= mp->regions[j].address)
break;
mp->regions[j+1] = mp->regions[j];
}
mp->regions[j+1].address = a;
mp->regions[j+1].size = s;
}
}
void __init
mem_pieces_coalesce(struct mem_pieces *mp)
{
unsigned long a, s, ns;
int i, j, d;
d = 0;
for (i = 0; i < mp->n_regions; i = j) {
a = mp->regions[i].address;
s = mp->regions[i].size;
for (j = i + 1; j < mp->n_regions
&& mp->regions[j].address - a <= s; ++j) {
ns = mp->regions[j].address + mp->regions[j].size - a;
if (ns > s)
s = ns;
}
mp->regions[d].address = a;
mp->regions[d].size = s;
++d;
}
mp->n_regions = d;
}
arch/powerpc/mm/mem_pieces.h 已删除 100644 → 0
浏览文件 @ 9b6b563c
/*
* Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
* Changes to accommodate Power Macintoshes.
* Cort Dougan <cort@cs.nmt.edu>
* Rewrites.
* Grant Erickson <grant@lcse.umn.edu>
* General rework and split from mm/init.c.
*
* Module name: mem_pieces.h
*
* Description:
* Routines and data structures for manipulating and representing
* phyiscal memory extents (i.e. address/length pairs).
*
*/
#ifndef __MEM_PIECES_H__
#define __MEM_PIECES_H__
#include <asm/prom.h>
#ifdef __cplusplus
extern "C" {
#endif
/* Type Definitions */
#define MEM_PIECES_MAX 32
struct mem_pieces {
int n_regions;
struct reg_property regions[MEM_PIECES_MAX];
};
/* Function Prototypes */
extern void *mem_pieces_find(unsigned int size, unsigned int align);
extern void mem_pieces_remove(struct mem_pieces *mp, unsigned int start,
unsigned int size, int must_exist);
extern void mem_pieces_coalesce(struct mem_pieces *mp);
extern void mem_pieces_sort(struct mem_pieces *mp);
#ifdef __cplusplus
}
#endif
#endif /* __MEM_PIECES_H__ */
arch/powerpc/mm/mmu_decl.h
浏览文件 @ 7c8c6b97
......@@ -36,6 +36,8 @@ extern unsigned long ioremap_base;
extern unsigned long ioremap_bot;
extern unsigned int rtas_data, rtas_size;
extern unsigned long __max_low_memory;
extern unsigned long __initial_memory_limit;
extern unsigned long total_memory;
extern unsigned long total_lowmem;
extern int mem_init_done;
......
arch/powerpc/mm/pgtable.c
浏览文件 @ 7c8c6b97
......@@ -190,8 +190,7 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
* Don't allow anybody to remap normal RAM that we're using.
* mem_init() sets high_memory so only do the check after that.
*/
if ( mem_init_done && (p < virt_to_phys(high_memory)) )
{
if (mem_init_done && (p < virt_to_phys(high_memory))) {
printk("__ioremap(): phys addr "PHYS_FMT" is RAM lr %p\n", p,
__builtin_return_address(0));
return NULL;
......
arch/powerpc/mm/ppc_mmu.c
浏览文件 @ 7c8c6b97
......@@ -32,9 +32,9 @@
#include <asm/prom.h>
#include <asm/mmu.h>
#include <asm/machdep.h>
#include <asm/lmb.h>
#include "mmu_decl.h"
#include "mem_pieces.h"
PTE *Hash, *Hash_end;
unsigned long Hash_size, Hash_mask;
......@@ -215,17 +215,6 @@ void __init MMU_init_hw(void)
#define MIN_N_HPTEG 1024 /* min 64kB hash table */
#endif
#ifdef CONFIG_POWER4
/* The hash table has already been allocated and initialized
in prom.c */
n_hpteg = Hash_size >> LG_HPTEG_SIZE;
lg_n_hpteg = __ilog2(n_hpteg);
/* Remove the hash table from the available memory */
if (Hash)
reserve_phys_mem(__pa(Hash), Hash_size);
#else /* CONFIG_POWER4 */
/*
* Allow 1 HPTE (1/8 HPTEG) for each page of memory.
* This is less than the recommended amount, but then
......@@ -245,10 +234,10 @@ void __init MMU_init_hw(void)
* Find some memory for the hash table.
*/
if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
Hash = mem_pieces_find(Hash_size, Hash_size);
Hash = __va(lmb_alloc_base(Hash_size, Hash_size,
__initial_memory_limit));
cacheable_memzero(Hash, Hash_size);
_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
#endif /* CONFIG_POWER4 */
Hash_end = (PTE *) ((unsigned long)Hash + Hash_size);
......
include/asm-ppc/page.h
浏览文件 @ 7c8c6b97
......@@ -34,6 +34,17 @@ typedef unsigned long pte_basic_t;
#define PTE_FMT "%.8lx"
#endif
/* align addr on a size boundary - adjust address up/down if needed */
#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1)))
#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1)))
/* align addr on a size boundary - adjust address up if needed */
#define _ALIGN(addr,size) _ALIGN_UP(addr,size)
/* to align the pointer to the (next) page boundary */
#define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE)
#undef STRICT_MM_TYPECHECKS
#ifdef STRICT_MM_TYPECHECKS
......@@ -76,13 +87,6 @@ typedef unsigned long pgprot_t;
#endif
/* align addr on a size boundary - adjust address up if needed -- Cort */
#define _ALIGN(addr,size) (((addr)+(size)-1)&(~((size)-1)))
/* to align the pointer to the (next) page boundary */
#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK)
struct page;
extern void clear_pages(void *page, int order);
static inline void clear_page(void *page) { clear_pages(page, 0); }
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或