提交 7b29dc21 编写于 作者: J John W. Linville

Merge branch 'master' of...

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem
......@@ -4645,10 +4645,16 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
case 1:
break;
case 2:
if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
else
scaledPower = 0;
break;
case 3:
if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
else
scaledPower = 0;
break;
}
......
......@@ -524,10 +524,16 @@ static void ath9k_hw_set_ar9287_power_per_rate_table(struct ath_hw *ah,
case 1:
break;
case 2:
if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
else
scaledPower = 0;
break;
case 3:
if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
else
scaledPower = 0;
break;
}
scaledPower = max((u16)0, scaledPower);
......
......@@ -1543,7 +1543,7 @@ static void iwl4965_temperature_calib(struct iwl_priv *priv)
s32 temp;
temp = iwl4965_hw_get_temperature(priv);
if (temp < 0)
if (IWL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(temp))
return;
if (priv->temperature != temp) {
......
......@@ -603,19 +603,27 @@ struct iwl_cfg iwl6050_2abg_cfg = {
IWL_DEVICE_6050,
};
#define IWL_DEVICE_6150 \
.fw_name_pre = IWL6050_FW_PRE, \
.ucode_api_max = IWL6050_UCODE_API_MAX, \
.ucode_api_min = IWL6050_UCODE_API_MIN, \
.ops = &iwl6150_ops, \
.eeprom_ver = EEPROM_6150_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION, \
.base_params = &iwl6050_base_params, \
.need_dc_calib = true, \
.led_mode = IWL_LED_BLINK, \
.internal_wimax_coex = true
struct iwl_cfg iwl6150_bgn_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN",
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
.eeprom_ver = EEPROM_6150_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION,
.ops = &iwl6150_ops,
.base_params = &iwl6050_base_params,
IWL_DEVICE_6150,
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.led_mode = IWL_LED_RF_STATE,
.internal_wimax_coex = true,
};
struct iwl_cfg iwl6150_bg_cfg = {
.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BG",
IWL_DEVICE_6150,
};
struct iwl_cfg iwl6000_3agn_cfg = {
......
......@@ -3831,11 +3831,11 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
/* 6150 WiFi/WiMax Series */
{IWL_PCI_DEVICE(0x0885, 0x1305, iwl6150_bgn_cfg)},
{IWL_PCI_DEVICE(0x0885, 0x1306, iwl6150_bgn_cfg)},
{IWL_PCI_DEVICE(0x0885, 0x1307, iwl6150_bg_cfg)},
{IWL_PCI_DEVICE(0x0885, 0x1325, iwl6150_bgn_cfg)},
{IWL_PCI_DEVICE(0x0885, 0x1326, iwl6150_bgn_cfg)},
{IWL_PCI_DEVICE(0x0885, 0x1327, iwl6150_bg_cfg)},
{IWL_PCI_DEVICE(0x0886, 0x1315, iwl6150_bgn_cfg)},
{IWL_PCI_DEVICE(0x0886, 0x1316, iwl6150_bgn_cfg)},
{IWL_PCI_DEVICE(0x0886, 0x1317, iwl6150_bg_cfg)},
/* 1000 Series WiFi */
{IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},
......
......@@ -89,6 +89,7 @@ extern struct iwl_cfg iwl6000_3agn_cfg;
extern struct iwl_cfg iwl6050_2agn_cfg;
extern struct iwl_cfg iwl6050_2abg_cfg;
extern struct iwl_cfg iwl6150_bgn_cfg;
extern struct iwl_cfg iwl6150_bg_cfg;
extern struct iwl_cfg iwl1000_bgn_cfg;
extern struct iwl_cfg iwl1000_bg_cfg;
extern struct iwl_cfg iwl100_bgn_cfg;
......
......@@ -994,6 +994,8 @@ static void lbs_submit_command(struct lbs_private *priv,
cmd = cmdnode->cmdbuf;
spin_lock_irqsave(&priv->driver_lock, flags);
priv->seqnum++;
cmd->seqnum = cpu_to_le16(priv->seqnum);
priv->cur_cmd = cmdnode;
spin_unlock_irqrestore(&priv->driver_lock, flags);
......@@ -1621,11 +1623,9 @@ struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv,
/* Copy the incoming command to the buffer */
memcpy(cmdnode->cmdbuf, in_cmd, in_cmd_size);
/* Set sequence number, clean result, move to buffer */
priv->seqnum++;
/* Set command, clean result, move to buffer */
cmdnode->cmdbuf->command = cpu_to_le16(command);
cmdnode->cmdbuf->size = cpu_to_le16(in_cmd_size);
cmdnode->cmdbuf->seqnum = cpu_to_le16(priv->seqnum);
cmdnode->cmdbuf->result = 0;
lbs_deb_host("PREP_CMD: command 0x%04x\n", command);
......
......@@ -1157,6 +1157,9 @@ struct conf_sched_scan_settings {
/* time to wait on the channel for passive scans (in TUs) */
u32 dwell_time_passive;
/* time to wait on the channel for DFS scans (in TUs) */
u32 dwell_time_dfs;
/* number of probe requests to send on each channel in active scans */
u8 num_probe_reqs;
......
......@@ -311,6 +311,7 @@ static struct conf_drv_settings default_conf = {
.min_dwell_time_active = 8,
.max_dwell_time_active = 30,
.dwell_time_passive = 100,
.dwell_time_dfs = 150,
.num_probe_reqs = 2,
.rssi_threshold = -90,
.snr_threshold = 0,
......
......@@ -331,16 +331,22 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
int i, j;
u32 flags;
bool force_passive = !req->n_ssids;
for (i = 0, j = start;
i < req->n_channels && j < MAX_CHANNELS_ALL_BANDS;
i++) {
flags = req->channels[i]->flags;
if (!(flags & IEEE80211_CHAN_DISABLED) &&
((flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive) &&
((flags & IEEE80211_CHAN_RADAR) == radar) &&
(req->channels[i]->band == band)) {
if (force_passive)
flags |= IEEE80211_CHAN_PASSIVE_SCAN;
if ((req->channels[i]->band == band) &&
!(flags & IEEE80211_CHAN_DISABLED) &&
(!!(flags & IEEE80211_CHAN_RADAR) == radar) &&
/* if radar is set, we ignore the passive flag */
(radar ||
!!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive)) {
wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ",
req->channels[i]->band,
req->channels[i]->center_freq);
......@@ -350,7 +356,12 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
wl1271_debug(DEBUG_SCAN, "max_power %d",
req->channels[i]->max_power);
if (flags & IEEE80211_CHAN_PASSIVE_SCAN) {
if (flags & IEEE80211_CHAN_RADAR) {
channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS;
channels[j].passive_duration =
cpu_to_le16(c->dwell_time_dfs);
}
else if (flags & IEEE80211_CHAN_PASSIVE_SCAN) {
channels[j].passive_duration =
cpu_to_le16(c->dwell_time_passive);
} else {
......@@ -359,7 +370,7 @@ wl1271_scan_get_sched_scan_channels(struct wl1271 *wl,
channels[j].max_duration =
cpu_to_le16(c->max_dwell_time_active);
}
channels[j].tx_power_att = req->channels[j]->max_power;
channels[j].tx_power_att = req->channels[i]->max_power;
channels[j].channel = req->channels[i]->hw_value;
j++;
......@@ -386,7 +397,11 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl,
wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
IEEE80211_BAND_2GHZ,
false, false, idx);
idx += cfg->active[0];
/*
* 5GHz channels always start at position 14, not immediately
* after the last 2.4GHz channel
*/
idx = 14;
cfg->passive[1] =
wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
......@@ -394,22 +409,23 @@ wl1271_scan_sched_scan_channels(struct wl1271 *wl,
false, true, idx);
idx += cfg->passive[1];
cfg->active[1] =
cfg->dfs =
wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
IEEE80211_BAND_5GHZ,
false, false, 14);
idx += cfg->active[1];
true, true, idx);
idx += cfg->dfs;
cfg->dfs =
cfg->active[1] =
wl1271_scan_get_sched_scan_channels(wl, req, cfg->channels,
IEEE80211_BAND_5GHZ,
true, false, idx);
idx += cfg->dfs;
false, false, idx);
idx += cfg->active[1];
wl1271_debug(DEBUG_SCAN, " 2.4GHz: active %d passive %d",
cfg->active[0], cfg->passive[0]);
wl1271_debug(DEBUG_SCAN, " 5GHz: active %d passive %d",
cfg->active[1], cfg->passive[1]);
wl1271_debug(DEBUG_SCAN, " DFS: %d", cfg->dfs);
return idx;
}
......@@ -421,6 +437,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
struct wl1271_cmd_sched_scan_config *cfg = NULL;
struct conf_sched_scan_settings *c = &wl->conf.sched_scan;
int i, total_channels, ret;
bool force_passive = !req->n_ssids;
wl1271_debug(DEBUG_CMD, "cmd sched_scan scan config");
......@@ -444,7 +461,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
for (i = 0; i < SCAN_MAX_CYCLE_INTERVALS; i++)
cfg->intervals[i] = cpu_to_le32(req->interval);
if (req->ssids[0].ssid_len && req->ssids[0].ssid) {
if (!force_passive && req->ssids[0].ssid_len && req->ssids[0].ssid) {
cfg->filter_type = SCAN_SSID_FILTER_SPECIFIC;
cfg->ssid_len = req->ssids[0].ssid_len;
memcpy(cfg->ssid, req->ssids[0].ssid,
......@@ -461,7 +478,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
goto out;
}
if (cfg->active[0]) {
if (!force_passive && cfg->active[0]) {
ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid,
req->ssids[0].ssid_len,
ies->ie[IEEE80211_BAND_2GHZ],
......@@ -473,7 +490,7 @@ int wl1271_scan_sched_scan_config(struct wl1271 *wl,
}
}
if (cfg->active[1]) {
if (!force_passive && cfg->active[1]) {
ret = wl1271_cmd_build_probe_req(wl, req->ssids[0].ssid,
req->ssids[0].ssid_len,
ies->ie[IEEE80211_BAND_5GHZ],
......
......@@ -137,6 +137,9 @@ enum {
SCAN_BSS_TYPE_ANY,
};
#define SCAN_CHANNEL_FLAGS_DFS BIT(0)
#define SCAN_CHANNEL_FLAGS_DFS_ENABLED BIT(1)
struct conn_scan_ch_params {
__le16 min_duration;
__le16 max_duration;
......
......@@ -1533,6 +1533,31 @@ static void __exit usb_exit(void)
module_init(usb_init);
module_exit(usb_exit);
static int zd_ep_regs_out_msg(struct usb_device *udev, void *data, int len,
int *actual_length, int timeout)
{
/* In USB 2.0 mode EP_REGS_OUT endpoint is interrupt type. However in
* USB 1.1 mode endpoint is bulk. Select correct type URB by endpoint
* descriptor.
*/
struct usb_host_endpoint *ep;
unsigned int pipe;
pipe = usb_sndintpipe(udev, EP_REGS_OUT);
ep = usb_pipe_endpoint(udev, pipe);
if (!ep)
return -EINVAL;
if (usb_endpoint_xfer_int(&ep->desc)) {
return usb_interrupt_msg(udev, pipe, data, len,
actual_length, timeout);
} else {
pipe = usb_sndbulkpipe(udev, EP_REGS_OUT);
return usb_bulk_msg(udev, pipe, data, len, actual_length,
timeout);
}
}
static int usb_int_regs_length(unsigned int count)
{
return sizeof(struct usb_int_regs) + count * sizeof(struct reg_data);
......@@ -1648,15 +1673,14 @@ int zd_usb_ioread16v(struct zd_usb *usb, u16 *values,
udev = zd_usb_to_usbdev(usb);
prepare_read_regs_int(usb);
r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT),
req, req_len, &actual_req_len, 50 /* ms */);
r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
if (r) {
dev_dbg_f(zd_usb_dev(usb),
"error in usb_interrupt_msg(). Error number %d\n", r);
"error in zd_ep_regs_out_msg(). Error number %d\n", r);
goto error;
}
if (req_len != actual_req_len) {
dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()\n"
dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()\n"
" req_len %d != actual_req_len %d\n",
req_len, actual_req_len);
r = -EIO;
......@@ -1818,9 +1842,17 @@ int zd_usb_iowrite16v_async(struct zd_usb *usb, const struct zd_ioreq16 *ioreqs,
rw->value = cpu_to_le16(ioreqs[i].value);
}
/* In USB 2.0 mode endpoint is interrupt type. However in USB 1.1 mode
* endpoint is bulk. Select correct type URB by endpoint descriptor.
*/
if (usb_endpoint_xfer_int(&ep->desc))
usb_fill_int_urb(urb, udev, usb_sndintpipe(udev, EP_REGS_OUT),
req, req_len, iowrite16v_urb_complete, usb,
ep->desc.bInterval);
else
usb_fill_bulk_urb(urb, udev, usb_sndbulkpipe(udev, EP_REGS_OUT),
req, req_len, iowrite16v_urb_complete, usb);
urb->transfer_flags |= URB_FREE_BUFFER;
/* Submit previous URB */
......@@ -1924,15 +1956,14 @@ int zd_usb_rfwrite(struct zd_usb *usb, u32 value, u8 bits)
}
udev = zd_usb_to_usbdev(usb);
r = usb_interrupt_msg(udev, usb_sndintpipe(udev, EP_REGS_OUT),
req, req_len, &actual_req_len, 50 /* ms */);
r = zd_ep_regs_out_msg(udev, req, req_len, &actual_req_len, 50 /*ms*/);
if (r) {
dev_dbg_f(zd_usb_dev(usb),
"error in usb_interrupt_msg(). Error number %d\n", r);
"error in zd_ep_regs_out_msg(). Error number %d\n", r);
goto out;
}
if (req_len != actual_req_len) {
dev_dbg_f(zd_usb_dev(usb), "error in usb_interrupt_msg()"
dev_dbg_f(zd_usb_dev(usb), "error in zd_ep_regs_out_msg()"
" req_len %d != actual_req_len %d\n",
req_len, actual_req_len);
r = -EIO;
......
......@@ -1003,8 +1003,12 @@ struct ieee80211_ht_info {
#define WLAN_CAPABILITY_ESS (1<<0)
#define WLAN_CAPABILITY_IBSS (1<<1)
/* A mesh STA sets the ESS and IBSS capability bits to zero */
#define WLAN_CAPABILITY_IS_MBSS(cap) \
/*
* A mesh STA sets the ESS and IBSS capability bits to zero.
* however, this holds true for p2p probe responses (in the p2p_find
* phase) as well.
*/
#define WLAN_CAPABILITY_IS_STA_BSS(cap) \
(!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)))
#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
......
......@@ -906,7 +906,7 @@ static struct l2cap_chan *l2cap_global_chan_by_psm(int state, __le16 psm, bdaddr
if (c->psm == psm) {
/* Exact match. */
if (!bacmp(&bt_sk(sk)->src, src)) {
read_unlock_bh(&chan_list_lock);
read_unlock(&chan_list_lock);
return c;
}
......
......@@ -267,13 +267,35 @@ static bool is_bss(struct cfg80211_bss *a,
return memcmp(ssidie + 2, ssid, ssid_len) == 0;
}
static bool is_mesh_bss(struct cfg80211_bss *a)
{
const u8 *ie;
if (!WLAN_CAPABILITY_IS_STA_BSS(a->capability))
return false;
ie = cfg80211_find_ie(WLAN_EID_MESH_ID,
a->information_elements,
a->len_information_elements);
if (!ie)
return false;
ie = cfg80211_find_ie(WLAN_EID_MESH_CONFIG,
a->information_elements,
a->len_information_elements);
if (!ie)
return false;
return true;
}
static bool is_mesh(struct cfg80211_bss *a,
const u8 *meshid, size_t meshidlen,
const u8 *meshcfg)
{
const u8 *ie;
if (!WLAN_CAPABILITY_IS_MBSS(a->capability))
if (!WLAN_CAPABILITY_IS_STA_BSS(a->capability))
return false;
ie = cfg80211_find_ie(WLAN_EID_MESH_ID,
......@@ -311,7 +333,7 @@ static int cmp_bss(struct cfg80211_bss *a,
if (a->channel != b->channel)
return b->channel->center_freq - a->channel->center_freq;
if (WLAN_CAPABILITY_IS_MBSS(a->capability | b->capability)) {
if (is_mesh_bss(a) && is_mesh_bss(b)) {
r = cmp_ies(WLAN_EID_MESH_ID,
a->information_elements,
a->len_information_elements,
......@@ -457,7 +479,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
struct cfg80211_internal_bss *res)
{
struct cfg80211_internal_bss *found = NULL;
const u8 *meshid, *meshcfg;
/*
* The reference to "res" is donated to this function.
......@@ -470,22 +491,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
res->ts = jiffies;
if (WLAN_CAPABILITY_IS_MBSS(res->pub.capability)) {
/* must be mesh, verify */
meshid = cfg80211_find_ie(WLAN_EID_MESH_ID,
res->pub.information_elements,
res->pub.len_information_elements);
meshcfg = cfg80211_find_ie(WLAN_EID_MESH_CONFIG,
res->pub.information_elements,
res->pub.len_information_elements);
if (!meshid || !meshcfg ||
meshcfg[1] != sizeof(struct ieee80211_meshconf_ie)) {
/* bogus mesh */
kref_put(&res->ref, bss_release);
return NULL;
}
}
spin_lock_bh(&dev->bss_lock);
found = rb_find_bss(dev, res);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册