diff --git a/arch/ppc/platforms/pmac_cpufreq.c b/arch/ppc/platforms/pmac_cpufreq.c index 9c85f9ca1cfb32110bb2dfd94396b7d048560a9a..f7fb2786cd505a7701fe2322c73b169af4ff2133 100644 --- a/arch/ppc/platforms/pmac_cpufreq.c +++ b/arch/ppc/platforms/pmac_cpufreq.c @@ -1,13 +1,18 @@ /* * arch/ppc/platforms/pmac_cpufreq.c * - * Copyright (C) 2002 - 2004 Benjamin Herrenschmidt + * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt * Copyright (C) 2004 John Steele Scott * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * + * TODO: Need a big cleanup here. Basically, we need to have different + * cpufreq_driver structures for the different type of HW instead of the + * current mess. We also need to better deal with the detection of the + * type of machine. + * */ #include @@ -35,6 +40,7 @@ #include #include #include +#include /* WARNING !!! This will cause calibrate_delay() to be called, * but this is an __init function ! So you MUST go edit @@ -61,11 +67,13 @@ extern void low_sleep_handler(void); static unsigned int low_freq; static unsigned int hi_freq; static unsigned int cur_freq; +static unsigned int sleep_freq; /* * Different models uses different mecanisms to switch the frequency */ static int (*set_speed_proc)(int low_speed); +static unsigned int (*get_speed_proc)(void); /* * Some definitions used by the various speedprocs @@ -73,6 +81,8 @@ static int (*set_speed_proc)(int low_speed); static u32 voltage_gpio; static u32 frequency_gpio; static u32 slew_done_gpio; +static int no_schedule; +static int has_cpu_l2lve; #define PMAC_CPU_LOW_SPEED 1 @@ -90,6 +100,14 @@ static struct cpufreq_frequency_table pmac_cpu_freqs[] = { {0, CPUFREQ_TABLE_END}, }; +static inline void local_delay(unsigned long ms) +{ + if (no_schedule) + mdelay(ms); + else + msleep(ms); +} + static inline void wakeup_decrementer(void) { set_dec(tb_ticks_per_jiffy); @@ -118,20 +136,48 @@ static inline void debug_calc_bogomips(void) */ static int __pmac cpu_750fx_cpu_speed(int low_speed) { -#ifdef DEBUG_FREQ - printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); -#endif + u32 hid2; + + if (low_speed == 0) { + /* ramping up, set voltage first */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); + /* Make sure we sleep for at least 1ms */ + local_delay(10); + + /* tweak L2 for high voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 &= ~0x2000; + mtspr(SPRN_HID2, hid2); + } + } #ifdef CONFIG_6xx low_choose_750fx_pll(low_speed); #endif -#ifdef DEBUG_FREQ - printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); - debug_calc_bogomips(); -#endif + if (low_speed == 1) { + /* tweak L2 for low voltage */ + if (has_cpu_l2lve) { + hid2 = mfspr(SPRN_HID2); + hid2 |= 0x2000; + mtspr(SPRN_HID2, hid2); + } + + /* ramping down, set voltage last */ + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); + local_delay(10); + } return 0; } +static unsigned int __pmac cpu_750fx_get_cpu_speed(void) +{ + if (mfspr(SPRN_HID1) & HID1_PS) + return low_freq; + else + return hi_freq; +} + /* Switch CPU speed using DFS */ static int __pmac dfs_set_cpu_speed(int low_speed) { @@ -139,22 +185,25 @@ static int __pmac dfs_set_cpu_speed(int low_speed) /* ramping up, set voltage first */ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); /* Make sure we sleep for at least 1ms */ - msleep(1); + local_delay(1); } /* set frequency */ +#ifdef CONFIG_6xx low_choose_7447a_dfs(low_speed); +#endif + udelay(100); if (low_speed == 1) { /* ramping down, set voltage last */ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - msleep(1); + local_delay(1); } return 0; } -static unsigned int __pmac dfs_get_cpu_speed(unsigned int cpu) +static unsigned int __pmac dfs_get_cpu_speed(void) { if (mfspr(SPRN_HID1) & HID1_DFS) return low_freq; @@ -167,30 +216,35 @@ static unsigned int __pmac dfs_get_cpu_speed(unsigned int cpu) */ static int __pmac gpios_set_cpu_speed(int low_speed) { - int gpio; + int gpio, timeout = 0; /* If ramping up, set voltage first */ if (low_speed == 0) { pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); /* Delay is way too big but it's ok, we schedule */ - msleep(10); + local_delay(10); } /* Set frequency */ + gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); + if (low_speed == ((gpio & 0x01) == 0)) + goto skip; + pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, low_speed ? 0x04 : 0x05); udelay(200); do { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(1); + if (++timeout > 100) + break; + local_delay(1); gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); } while((gpio & 0x02) == 0); - + skip: /* If ramping down, set voltage last */ if (low_speed == 1) { pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); /* Delay is way too big but it's ok, we schedule */ - msleep(10); + local_delay(10); } #ifdef DEBUG_FREQ @@ -207,6 +261,8 @@ static int __pmac pmu_set_cpu_speed(int low_speed) struct adb_request req; unsigned long save_l2cr; unsigned long save_l3cr; + unsigned int pic_prio; + unsigned long flags; preempt_disable(); @@ -214,7 +270,8 @@ static int __pmac pmu_set_cpu_speed(int low_speed) printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); #endif /* Disable all interrupt sources on openpic */ - openpic_set_priority(0xf); + pic_prio = openpic_get_priority(); + openpic_set_priority(0xf); /* Make sure the decrementer won't interrupt us */ asm volatile("mtdec %0" : : "r" (0x7fffffff)); @@ -224,7 +281,7 @@ static int __pmac pmu_set_cpu_speed(int low_speed) asm volatile("mtdec %0" : : "r" (0x7fffffff)); /* We can now disable MSR_EE */ - local_irq_disable(); + local_irq_save(flags); /* Giveup the FPU & vec */ enable_kernel_fp(); @@ -277,10 +334,10 @@ static int __pmac pmu_set_cpu_speed(int low_speed) wakeup_decrementer(); /* Restore interrupts */ - openpic_set_priority(0); + openpic_set_priority(pic_prio); /* Let interrupts flow again ... */ - local_irq_enable(); + local_irq_restore(flags); #ifdef DEBUG_FREQ debug_calc_bogomips(); @@ -291,9 +348,11 @@ static int __pmac pmu_set_cpu_speed(int low_speed) return 0; } -static int __pmac do_set_cpu_speed(int speed_mode) +static int __pmac do_set_cpu_speed(int speed_mode, int notify) { struct cpufreq_freqs freqs; + unsigned long l3cr; + static unsigned long prev_l3cr; freqs.old = cur_freq; freqs.new = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq; @@ -302,14 +361,35 @@ static int __pmac do_set_cpu_speed(int speed_mode) if (freqs.old == freqs.new) return 0; - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + if (notify) + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + if (speed_mode == PMAC_CPU_LOW_SPEED && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if (l3cr & L3CR_L3E) { + prev_l3cr = l3cr; + _set_L3CR(0); + } + } set_speed_proc(speed_mode == PMAC_CPU_LOW_SPEED); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + if (speed_mode == PMAC_CPU_HIGH_SPEED && + cpu_has_feature(CPU_FTR_L3CR)) { + l3cr = _get_L3CR(); + if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) + _set_L3CR(prev_l3cr); + } + if (notify) + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); cur_freq = (speed_mode == PMAC_CPU_HIGH_SPEED) ? hi_freq : low_freq; return 0; } +static unsigned int __pmac pmac_cpufreq_get_speed(unsigned int cpu) +{ + return cur_freq; +} + static int __pmac pmac_cpufreq_verify(struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs); @@ -325,7 +405,7 @@ static int __pmac pmac_cpufreq_target( struct cpufreq_policy *policy, target_freq, relation, &newstate)) return -EINVAL; - return do_set_cpu_speed(newstate); + return do_set_cpu_speed(newstate, 1); } unsigned int __pmac pmac_get_one_cpufreq(int i) @@ -349,19 +429,65 @@ static int __pmac pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) static u32 __pmac read_gpio(struct device_node *np) { u32 *reg = (u32 *)get_property(np, "reg", NULL); + u32 offset; if (reg == NULL) return 0; /* That works for all keylargos but shall be fixed properly - * some day... + * some day... The problem is that it seems we can't rely + * on the "reg" property of the GPIO nodes, they are either + * relative to the base of KeyLargo or to the base of the + * GPIO space, and the device-tree doesn't help. + */ + offset = *reg; + if (offset < KEYLARGO_GPIO_LEVELS0) + offset += KEYLARGO_GPIO_LEVELS0; + return offset; +} + +static int __pmac pmac_cpufreq_suspend(struct cpufreq_policy *policy, u32 state) +{ + /* Ok, this could be made a bit smarter, but let's be robust for now. We + * always force a speed change to high speed before sleep, to make sure + * we have appropriate voltage and/or bus speed for the wakeup process, + * and to make sure our loops_per_jiffies are "good enough", that is will + * not cause too short delays if we sleep in low speed and wake in high + * speed.. */ - return 0x50 + (*reg); + no_schedule = 1; + sleep_freq = cur_freq; + if (cur_freq == low_freq) + do_set_cpu_speed(PMAC_CPU_HIGH_SPEED, 0); + return 0; +} + +static int __pmac pmac_cpufreq_resume(struct cpufreq_policy *policy) +{ + /* If we resume, first check if we have a get() function */ + if (get_speed_proc) + cur_freq = get_speed_proc(); + else + cur_freq = 0; + + /* We don't, hrm... we don't really know our speed here, best + * is that we force a switch to whatever it was, which is + * probably high speed due to our suspend() routine + */ + do_set_cpu_speed(sleep_freq == low_freq ? PMAC_CPU_LOW_SPEED + : PMAC_CPU_HIGH_SPEED, 0); + + no_schedule = 0; + return 0; } static struct cpufreq_driver pmac_cpufreq_driver = { .verify = pmac_cpufreq_verify, .target = pmac_cpufreq_target, + .get = pmac_cpufreq_get_speed, .init = pmac_cpufreq_cpu_init, + .suspend = pmac_cpufreq_suspend, + .resume = pmac_cpufreq_resume, + .flags = CPUFREQ_PM_NO_WARN, .name = "powermac", .owner = THIS_MODULE, }; @@ -461,14 +587,14 @@ static int __pmac pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) static int __pmac pmac_cpufreq_init_7447A(struct device_node *cpunode) { struct device_node *volt_gpio_np; - u32 *reg; - struct cpufreq_driver *driver = &pmac_cpufreq_driver; - /* Look for voltage GPIO */ + if (get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); - reg = (u32 *)get_property(volt_gpio_np, "reg", NULL); - voltage_gpio = *reg; - if (!volt_gpio_np){ + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + if (!voltage_gpio){ printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); return 1; } @@ -478,9 +604,37 @@ static int __pmac pmac_cpufreq_init_7447A(struct device_node *cpunode) low_freq = cur_freq/2; /* Read actual frequency from CPU */ - driver->get = dfs_get_cpu_speed; - cur_freq = driver->get(0); + cur_freq = dfs_get_cpu_speed(); set_speed_proc = dfs_set_cpu_speed; + get_speed_proc = dfs_get_cpu_speed; + + return 0; +} + +static int __pmac pmac_cpufreq_init_750FX(struct device_node *cpunode) +{ + struct device_node *volt_gpio_np; + u32 pvr, *value; + + if (get_property(cpunode, "dynamic-power-step", NULL) == NULL) + return 1; + + hi_freq = cur_freq; + value = (u32 *)get_property(cpunode, "reduced-clock-frequency", NULL); + if (!value) + return 1; + low_freq = (*value) / 1000; + + volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); + if (volt_gpio_np) + voltage_gpio = read_gpio(volt_gpio_np); + + pvr = mfspr(SPRN_PVR); + has_cpu_l2lve = !((pvr & 0xf00) == 0x100); + + set_speed_proc = cpu_750fx_cpu_speed; + get_speed_proc = cpu_750fx_get_cpu_speed; + cur_freq = cpu_750fx_get_cpu_speed(); return 0; } @@ -543,16 +697,8 @@ static int __init pmac_cpufreq_setup(void) set_speed_proc = pmu_set_cpu_speed; } /* Else check for 750FX */ - else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) { - if (get_property(cpunode, "dynamic-power-step", NULL) == NULL) - goto out; - hi_freq = cur_freq; - value = (u32 *)get_property(cpunode, "reduced-clock-frequency", NULL); - if (!value) - goto out; - low_freq = (*value) / 1000; - set_speed_proc = cpu_750fx_cpu_speed; - } + else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) + pmac_cpufreq_init_750FX(cpunode); out: if (set_speed_proc == NULL) return -ENODEV; diff --git a/arch/ppc/platforms/pmac_feature.c b/arch/ppc/platforms/pmac_feature.c index 8e60550863a6e4fb535a122948bfcd274ca61718..eda9c80746a4c785cdb85b62624d188c9d8c013f 100644 --- a/arch/ppc/platforms/pmac_feature.c +++ b/arch/ppc/platforms/pmac_feature.c @@ -1779,32 +1779,6 @@ core99_sleep_state(struct device_node* node, long param, long value) if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) return -EPERM; -#ifdef CONFIG_CPU_FREQ_PMAC - /* XXX should be elsewhere */ - if (machine_is_compatible("PowerBook6,5") || - machine_is_compatible("PowerBook6,4") || - machine_is_compatible("PowerBook5,5") || - machine_is_compatible("PowerBook5,4")) { - struct device_node *volt_gpio_np; - u32 *reg = NULL; - - volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); - if (volt_gpio_np != NULL) - reg = (u32 *)get_property(volt_gpio_np, "reg", NULL); - if (reg != NULL) { - /* Set the CPU voltage high if sleeping */ - if (value == 1) { - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, - *reg, 0x05); - } else if (value == 0 && (mfspr(SPRN_HID1) & HID1_DFS)) { - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, - *reg, 0x04); - } - mdelay(2); - } - } -#endif /* CONFIG_CPU_FREQ_PMAC */ - if (value == 1) return core99_sleep(); else if (value == 0) diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c index 406f36a8a681ffbcd65b21d816f903a70d8bfe58..7619e16fccaef18ddd666a5058487283f884af5c 100644 --- a/arch/ppc/syslib/open_pic.c +++ b/arch/ppc/syslib/open_pic.c @@ -78,7 +78,6 @@ static void openpic_mapirq(u_int irq, cpumask_t cpumask, cpumask_t keepmask); */ #ifdef notused static void openpic_enable_8259_pass_through(void); -static u_int openpic_get_priority(void); static u_int openpic_get_spurious(void); static void openpic_set_sense(u_int irq, int sense); #endif /* notused */ @@ -465,8 +464,7 @@ void openpic_eoi(void) (void)openpic_read(&OpenPIC->THIS_CPU.EOI); } -#ifdef notused -static u_int openpic_get_priority(void) +u_int openpic_get_priority(void) { DECL_THIS_CPU; @@ -474,7 +472,6 @@ static u_int openpic_get_priority(void) return openpic_readfield(&OpenPIC->THIS_CPU.Current_Task_Priority, OPENPIC_CURRENT_TASK_PRIORITY_MASK); } -#endif /* notused */ void openpic_set_priority(u_int pri) { diff --git a/include/asm-ppc/open_pic.h b/include/asm-ppc/open_pic.h index 58545e4cdbc0f6c564d2fe9f953fbd5e76de6873..dbe853319741e9e96049b7c6c6c9f089284e6ff6 100644 --- a/include/asm-ppc/open_pic.h +++ b/include/asm-ppc/open_pic.h @@ -56,6 +56,7 @@ extern void smp_openpic_message_pass(int target, int msg, unsigned long data, int wait); extern void openpic_set_k2_cascade(int irq); extern void openpic_set_priority(u_int pri); +extern u_int openpic_get_priority(void); extern inline int openpic_to_irq(int irq) { diff --git a/include/asm-ppc/reg.h b/include/asm-ppc/reg.h index 3372dee36a8cca24bdd36257c5063abf1b23ca51..c418aab7cd346a7967581c150789cbb0480c2363 100644 --- a/include/asm-ppc/reg.h +++ b/include/asm-ppc/reg.h @@ -181,6 +181,7 @@ #define HID1_PC3 (1<<13) /* 7450 PLL_CFG[3] */ #define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */ #define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */ +#define HID1_PS (1<<16) /* 750FX PLL selection */ #define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */ #define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */ #define SPRN_HID4 0x3F4 /* 970 HID4 */