From 787926b1b2d21d42ca462dc736b77f1a4a30c503 Mon Sep 17 00:00:00 2001 From: Kai Makisara Date: Sun, 13 Nov 2005 10:04:44 +0200 Subject: [PATCH] [SCSI] Fix st oops with new scsi_execute infrastructure Patch from Kai minus last sg_segs clearing which was merged already. > > Was there a oops or lockup or any debug output you can send me? I will try > > some more large request tests with scsi_debug. You also have to compile your > > kernel with SCSI_MAX_PHYS_SEGMENTS == 255 to get larger requests now. > It was an oops in sgl_unmap_user_pages(). The reason is this: /* XXX: just for debug. Remove when PageReserved is removed */ BUG_ON(PageReserved(page)); I was using /dev/zero as input and it triggers this. When I used a file as input, this did not trigger. Should this BUG_ON be removed? In the same log I noticed that there was another ->sg_segs inconsistency. Also, the field ->last_SRpnt was not reset when scsi_execute_async() failed. This caused the error message "Async command already active" later and prevented proper close. While doing the changes, I noticed that the current code (since 2.6.0-test4) does not set the pages dirty when reading with direct i/o. All of these st problems (including the one I sent earlier) are fixed in the patch at the end of this message. These fixes should probably be included already in 2.6.15. After these fixes, the tape seems to operate as expected. Without other changes, the largest block size with sym53c896 SCSI adapter is 384 kB. The maximum number of sg segments is set to 96 and clustering is disabled in the driver. 96 x 4 kB = 384 kB. OK. I enabled clustering and set max_sectors to 10000 in the SCSI HBA driver. Now the block size limit is 5000 kB as expected. Signed-off-by: James Bottomley --- drivers/scsi/st.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c index 26e13dc7bcdb..2096d137f5ee 100644 --- a/drivers/scsi/st.c +++ b/drivers/scsi/st.c @@ -511,9 +511,11 @@ st_do_scsi(struct st_request * SRpnt, struct scsi_tape * STp, unsigned char *cmd if (scsi_execute_async(STp->device, cmd, direction, &((STp->buffer)->sg[0]), bytes, (STp->buffer)->sg_segs, - timeout, retries, SRpnt, st_sleep_done, GFP_KERNEL)) + timeout, retries, SRpnt, st_sleep_done, GFP_KERNEL)) { /* could not allocate the buffer or request was too large */ (STp->buffer)->syscall_result = (-EBUSY); + (STp->buffer)->last_SRpnt = NULL; + } else if (do_wait) { wait_for_completion(waiting); SRpnt->waiting = NULL; @@ -1449,14 +1451,15 @@ static int setup_buffering(struct scsi_tape *STp, const char __user *buf, /* Can be called more than once after each setup_buffer() */ -static void release_buffering(struct scsi_tape *STp) +static void release_buffering(struct scsi_tape *STp, int is_read) { struct st_buffer *STbp; STbp = STp->buffer; if (STbp->do_dio) { - sgl_unmap_user_pages(&(STbp->sg[0]), STbp->do_dio, 0); + sgl_unmap_user_pages(&(STbp->sg[0]), STbp->do_dio, is_read); STbp->do_dio = 0; + STbp->sg_segs = 0; } } @@ -1729,7 +1732,7 @@ st_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos) out: if (SRpnt != NULL) st_release_request(SRpnt); - release_buffering(STp); + release_buffering(STp, 0); up(&STp->lock); return retval; @@ -1787,7 +1790,7 @@ static long read_tape(struct scsi_tape *STp, long count, SRpnt = *aSRpnt; SRpnt = st_do_scsi(SRpnt, STp, cmd, bytes, DMA_FROM_DEVICE, STp->device->timeout, MAX_RETRIES, 1); - release_buffering(STp); + release_buffering(STp, 1); *aSRpnt = SRpnt; if (!SRpnt) return STbp->syscall_result; @@ -2058,7 +2061,7 @@ st_read(struct file *filp, char __user *buf, size_t count, loff_t * ppos) SRpnt = NULL; } if (do_dio) { - release_buffering(STp); + release_buffering(STp, 1); STbp->buffer_bytes = 0; } up(&STp->lock); -- GitLab