diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index e45a8f9597194810190d3c937f99deb854239f42..840bfed312f6bd1059ecfa89850386e62200fa55 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -66,7 +66,7 @@ config BONDING 'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux. The driver supports multiple bonding modes to allow for both high - perfomance and high availability operation. + performance and high availability operation. Refer to for more information. @@ -698,8 +698,8 @@ config VORTEX depends on NET_VENDOR_3COM && (PCI || EISA) select MII ---help--- - This option enables driver support for a large number of 10mbps and - 10/100mbps EISA, PCI and PCMCIA 3Com network cards: + This option enables driver support for a large number of 10Mbps and + 10/100Mbps EISA, PCI and PCMCIA 3Com network cards: "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI "Boomerang" (EtherLink XL 3c900 or 3c905) PCI @@ -1021,7 +1021,7 @@ config EEXPRESS_PRO depends on NET_ISA ---help--- If you have a network (Ethernet) card of this type, say Y. This - driver supports intel i82595{FX,TX} based boards. Note however + driver supports Intel i82595{FX,TX} based boards. Note however that the EtherExpress PRO/100 Ethernet card has its own separate driver. Please read the Ethernet-HOWTO, available from . @@ -1207,7 +1207,7 @@ config IBM_EMAC_RX_SKB_HEADROOM help Additional receive skb headroom. Note, that driver will always reserve at least 2 bytes to make IP header - aligned, so usualy there is no need to add any additional + aligned, so usually there is no need to add any additional headroom. If unsure, set to 0. @@ -1933,7 +1933,7 @@ config MYRI_SBUS will be called myri_sbus. This is recommended. config NS83820 - tristate "National Semiconduct DP83820 support" + tristate "National Semiconductor DP83820 support" depends on PCI help This is a driver for the National Semiconductor DP83820 series @@ -2513,7 +2513,7 @@ config PPP_FILTER Say Y here if you want to be able to filter the packets passing over PPP interfaces. This allows you to control which packets count as activity (i.e. which packets will reset the idle timer or bring up - a demand-dialled link) and which packets are to be dropped entirely. + a demand-dialed link) and which packets are to be dropped entirely. You need to say Y here if you wish to use the pass-filter and active-filter options to pppd. @@ -2701,8 +2701,8 @@ config SHAPER for more information. An alternative to this traffic shaper is the experimental - Class-Based Queueing (CBQ) scheduling support which you get if you - say Y to "QoS and/or fair queueing" above. + Class-Based Queuing (CBQ) scheduling support which you get if you + say Y to "QoS and/or fair queuing" above. To compile this driver as a module, choose M here: the module will be called shaper. If unsure, say N. diff --git a/drivers/net/arcnet/Kconfig b/drivers/net/arcnet/Kconfig index 948de2532a1ef375e0a3f13d58acd17a00b7515b..7284ccad0b919383a72ef6da0589c1d256cc6a8e 100644 --- a/drivers/net/arcnet/Kconfig +++ b/drivers/net/arcnet/Kconfig @@ -68,10 +68,10 @@ config ARCNET_CAP packet is stuffed with an extra 4 byte "cookie" which doesn't actually appear on the network. After transmit the driver will send back a packet with protocol byte 0 containing the status of the - transmition: + transmission: 0=no hardware acknowledge 1=excessive nak - 2=transmition accepted by the reciever hardware + 2=transmission accepted by the receiver hardware Received packets are also stuffed with the extra 4 bytes but it will be random data. diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index 7a081346f07932a977e2743626b40afb6d291b68..c81fe1c382d5f9296b9939c8e2f7d0dbd42d1fa7 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -283,7 +283,7 @@ config USB_IRDA Say Y here if you want to build support for the USB IrDA FIR Dongle device driver. To compile it as a module, choose M here: the module will be called irda-usb. IrDA-USB support the various IrDA USB - dongles available and most of their pecularities. Those dongles + dongles available and most of their peculiarities. Those dongles plug in the USB port of your computer, are plug and play, and support SIR and FIR (4Mbps) speeds. On the other hand, those dongles tend to be less efficient than a FIR chipset. @@ -360,7 +360,7 @@ config ALI_FIR help Say Y here if you want to build support for the ALi M5123 FIR Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C, - M1535, M1535D, M1535+, M1535D Sourth Bridge. This driver supports + M1535, M1535D, M1535+, M1535D South Bridge. This driver supports SIR, MIR and FIR (4Mbps) speeds. To compile it as a module, choose M here: the module will be called diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 18c27e1e78840b7832eb4a0d069039843da95be0..883cf7da10fcb0f41ab9e4f5fd16626213f7a620 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -459,7 +459,7 @@ config WANPIPE_FR bool "WANPIPE Frame Relay support" depends on VENDOR_SANGOMA help - Connect a WANPIPE card to a Frame Relay network, or use Frame Felay + Connect a WANPIPE card to a Frame Relay network, or use Frame Relay API to develop custom applications. Contains the Ethernet Bridging over Frame Relay feature, where diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index a1ede41d90716920827fbb63c011457173ead90f..5b0a19a5058d2ccb9c310485e04482999b7cbe51 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -136,8 +136,9 @@ comment "Wireless 802.11b ISA/PCI cards support" config IPW2100 tristate "Intel PRO/Wireless 2100 Network Connection" - depends on NET_RADIO && PCI && IEEE80211 + depends on NET_RADIO && PCI select FW_LOADER + select IEEE80211 ---help--- A driver for the Intel PRO/Wireless 2100 Network Connection 802.11b wireless network adapter. @@ -189,8 +190,9 @@ config IPW2100_DEBUG config IPW2200 tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection" - depends on NET_RADIO && IEEE80211 && PCI + depends on NET_RADIO && PCI select FW_LOADER + select IEEE80211 ---help--- A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network Connection adapters. @@ -202,7 +204,7 @@ config IPW2200 In order to use this driver, you will need a firmware image for it. You can obtain the firmware from . See the above referenced README.ipw2200 - for information on where to install the firmare images. + for information on where to install the firmware images. You will also very likely need the Wireless Tools in order to configure your card: @@ -214,6 +216,19 @@ config IPW2200 say M here and read . The module will be called ipw2200.ko. +config IPW2200_MONITOR + bool "Enable promiscuous mode" + depends on IPW2200 + ---help--- + Enables promiscuous/monitor mode support for the ipw2200 driver. + With this feature compiled into the driver, you can switch to + promiscuous mode via the Wireless Tool's Monitor mode. While in this + mode, no packets can be sent. + +config IPW_QOS + bool "Enable QoS support" + depends on IPW2200 && EXPERIMENTAL + config IPW2200_DEBUG bool "Enable full debugging output in IPW2200 module." depends on IPW2200 @@ -247,7 +262,7 @@ config AIRO PCI 802.11 wireless cards. It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X - with or without encryption) as well as card before the Cisco - aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). + acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). This driver support both the standard Linux Wireless Extensions and Cisco proprietary API, so both the Linux Wireless Tools and the @@ -396,7 +411,7 @@ config AIRO_CS driver part of the Linux Pcmcia package. It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X - with or without encryption) as well as card before the Cisco - aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also + acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom 802.11b cards. diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index ef6495b07890daa73191aad9f1e4706e3a482a0c..864937a409e514747770c27e52e786abbfafb12e 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -5036,7 +5036,6 @@ static int set_wep_key(struct airo_info *ai, u16 index, wkr.len = sizeof(wkr); wkr.kindex = 0xffff; wkr.mac[0] = (char)index; - if (perm) printk(KERN_INFO "Setting transmit key to %d\n", index); if (perm) ai->defindex = (char)index; } else { // We are actually setting the key @@ -5045,7 +5044,6 @@ static int set_wep_key(struct airo_info *ai, u16 index, wkr.klen = keylen; memcpy( wkr.key, key, keylen ); memcpy( wkr.mac, macaddr, ETH_ALEN ); - printk(KERN_INFO "Setting key %d\n", index); } if (perm) disable_MAC(ai, lock); @@ -6266,7 +6264,7 @@ static int airo_set_encodeext(struct net_device *dev, CapabilityRid cap_rid; /* Card capability info */ int perm = ( encoding->flags & IW_ENCODE_TEMP ? 0 : 1 ); u16 currentAuthType = local->config.authType; - int idx, key_len, alg = ext->alg; /* Check encryption mode */ + int idx, key_len, alg = ext->alg, set_key = 1; wep_key_t key; /* Is WEP supported ? */ @@ -6289,10 +6287,15 @@ static int airo_set_encodeext(struct net_device *dev, if (encoding->flags & IW_ENCODE_DISABLED) alg = IW_ENCODE_ALG_NONE; - /* Just setting the transmit key? */ if (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY) { + /* Only set transmit key index here, actual + * key is set below if needed. + */ set_wep_key(local, idx, NULL, 0, perm, 1); - } else { + set_key = ext->key_len > 0 ? 1 : 0; + } + + if (set_key) { /* Set the requested key first */ memset(key.key, 0, MAX_KEY_SIZE); switch (alg) { diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index dfc24016ba81735a721b169d561e4993dcf3bdb1..87afa6878f26c98a79e8800982a2f7ae8bfb20ed 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -137,44 +137,6 @@ static struct { #define MAC_BOOT_COMPLETE 0x0010 // MAC boot has been completed #define MAC_INIT_OK 0x0002 // MAC boot has been completed -#define C80211_SUBTYPE_MGMT_ASS_REQUEST 0x00 -#define C80211_SUBTYPE_MGMT_ASS_RESPONSE 0x10 -#define C80211_SUBTYPE_MGMT_REASS_REQUEST 0x20 -#define C80211_SUBTYPE_MGMT_REASS_RESPONSE 0x30 -#define C80211_SUBTYPE_MGMT_ProbeRequest 0x40 -#define C80211_SUBTYPE_MGMT_ProbeResponse 0x50 -#define C80211_SUBTYPE_MGMT_BEACON 0x80 -#define C80211_SUBTYPE_MGMT_ATIM 0x90 -#define C80211_SUBTYPE_MGMT_DISASSOSIATION 0xA0 -#define C80211_SUBTYPE_MGMT_Authentication 0xB0 -#define C80211_SUBTYPE_MGMT_Deauthentication 0xC0 - -#define C80211_MGMT_AAN_OPENSYSTEM 0x0000 -#define C80211_MGMT_AAN_SHAREDKEY 0x0001 - -#define C80211_MGMT_CAPABILITY_ESS 0x0001 // see 802.11 p.58 -#define C80211_MGMT_CAPABILITY_IBSS 0x0002 // - " - -#define C80211_MGMT_CAPABILITY_CFPollable 0x0004 // - " - -#define C80211_MGMT_CAPABILITY_CFPollRequest 0x0008 // - " - -#define C80211_MGMT_CAPABILITY_Privacy 0x0010 // - " - - -#define C80211_MGMT_SC_Success 0 -#define C80211_MGMT_SC_Unspecified 1 -#define C80211_MGMT_SC_SupportCapabilities 10 -#define C80211_MGMT_SC_ReassDenied 11 -#define C80211_MGMT_SC_AssDenied 12 -#define C80211_MGMT_SC_AuthAlgNotSupported 13 -#define C80211_MGMT_SC_AuthTransSeqNumError 14 -#define C80211_MGMT_SC_AuthRejectChallenge 15 -#define C80211_MGMT_SC_AuthRejectTimeout 16 -#define C80211_MGMT_SC_AssDeniedHandleAP 17 -#define C80211_MGMT_SC_AssDeniedBSSRate 18 - -#define C80211_MGMT_ElementID_SSID 0 -#define C80211_MGMT_ElementID_SupportedRates 1 -#define C80211_MGMT_ElementID_ChallengeText 16 -#define C80211_MGMT_CAPABILITY_ShortPreamble 0x0020 - #define MIB_MAX_DATA_BYTES 212 #define MIB_HEADER_SIZE 4 /* first four fields */ @@ -2835,7 +2797,7 @@ static void handle_beacon_probe(struct atmel_private *priv, u16 capability, u8 channel) { int rejoin = 0; - int new = capability & C80211_MGMT_CAPABILITY_ShortPreamble ? + int new = capability & MFIE_TYPE_POWER_CONSTRAINT ? SHORT_PREAMBLE : LONG_PREAMBLE; if (priv->preamble != new) { @@ -2921,11 +2883,11 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) memcpy(header.addr2, priv->dev->dev_addr, 6); memcpy(header.addr3, priv->CurrentBSSID, 6); - body.capability = cpu_to_le16(C80211_MGMT_CAPABILITY_ESS); + body.capability = cpu_to_le16(WLAN_CAPABILITY_ESS); if (priv->wep_is_on) - body.capability |= cpu_to_le16(C80211_MGMT_CAPABILITY_Privacy); + body.capability |= cpu_to_le16(WLAN_CAPABILITY_PRIVACY); if (priv->preamble == SHORT_PREAMBLE) - body.capability |= cpu_to_le16(C80211_MGMT_CAPABILITY_ShortPreamble); + body.capability |= cpu_to_le16(MFIE_TYPE_POWER_CONSTRAINT); body.listen_interval = cpu_to_le16(priv->listen_interval * priv->beacon_period); @@ -2939,10 +2901,10 @@ static void send_association_request(struct atmel_private *priv, int is_reassoc) bodysize = 12 + priv->SSID_size; } - ssid_el_p[0] = C80211_MGMT_ElementID_SSID; + ssid_el_p[0] = MFIE_TYPE_SSID; ssid_el_p[1] = priv->SSID_size; memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size); - ssid_el_p[2 + priv->SSID_size] = C80211_MGMT_ElementID_SupportedRates; + ssid_el_p[2 + priv->SSID_size] = MFIE_TYPE_RATES; ssid_el_p[3 + priv->SSID_size] = 4; /* len of suported rates */ memcpy(ssid_el_p + 4 + priv->SSID_size, atmel_basic_rates, 4); @@ -3004,7 +2966,7 @@ static void store_bss_info(struct atmel_private *priv, u16 beacon_period, u8 channel, u8 rssi, u8 ssid_len, u8 *ssid, int is_beacon) { - u8 *bss = capability & C80211_MGMT_CAPABILITY_ESS ? header->addr2 : header->addr3; + u8 *bss = capability & WLAN_CAPABILITY_ESS ? header->addr2 : header->addr3; int i, index; for (index = -1, i = 0; i < priv->BSS_list_entries; i++) @@ -3030,16 +2992,16 @@ static void store_bss_info(struct atmel_private *priv, priv->BSSinfo[index].channel = channel; priv->BSSinfo[index].beacon_period = beacon_period; - priv->BSSinfo[index].UsingWEP = capability & C80211_MGMT_CAPABILITY_Privacy; + priv->BSSinfo[index].UsingWEP = capability & WLAN_CAPABILITY_PRIVACY; memcpy(priv->BSSinfo[index].SSID, ssid, ssid_len); priv->BSSinfo[index].SSIDsize = ssid_len; - if (capability & C80211_MGMT_CAPABILITY_IBSS) + if (capability & WLAN_CAPABILITY_IBSS) priv->BSSinfo[index].BSStype = IW_MODE_ADHOC; - else if (capability & C80211_MGMT_CAPABILITY_ESS) + else if (capability & WLAN_CAPABILITY_ESS) priv->BSSinfo[index].BSStype =IW_MODE_INFRA; - priv->BSSinfo[index].preamble = capability & C80211_MGMT_CAPABILITY_ShortPreamble ? + priv->BSSinfo[index].preamble = capability & MFIE_TYPE_POWER_CONSTRAINT ? SHORT_PREAMBLE : LONG_PREAMBLE; } @@ -3050,7 +3012,7 @@ static void authenticate(struct atmel_private *priv, u16 frame_len) u16 trans_seq_no = le16_to_cpu(auth->trans_seq); u16 system = le16_to_cpu(auth->alg); - if (status == C80211_MGMT_SC_Success && !priv->wep_is_on) { + if (status == WLAN_STATUS_SUCCESS && !priv->wep_is_on) { /* no WEP */ if (priv->station_was_associated) { atmel_enter_state(priv, STATION_STATE_REASSOCIATING); @@ -3063,19 +3025,19 @@ static void authenticate(struct atmel_private *priv, u16 frame_len) } } - if (status == C80211_MGMT_SC_Success && priv->wep_is_on) { + if (status == WLAN_STATUS_SUCCESS && priv->wep_is_on) { int should_associate = 0; /* WEP */ if (trans_seq_no != priv->ExpectedAuthentTransactionSeqNum) return; - if (system == C80211_MGMT_AAN_OPENSYSTEM) { + if (system == WLAN_AUTH_OPEN) { if (trans_seq_no == 0x0002) { should_associate = 1; } - } else if (system == C80211_MGMT_AAN_SHAREDKEY) { + } else if (system == WLAN_AUTH_SHARED_KEY) { if (trans_seq_no == 0x0002 && - auth->el_id == C80211_MGMT_ElementID_ChallengeText) { + auth->el_id == MFIE_TYPE_CHALLENGE) { send_authentication_request(priv, system, auth->chall_text, auth->chall_text_len); return; } else if (trans_seq_no == 0x0004) { @@ -3140,8 +3102,8 @@ static void associate(struct atmel_private *priv, u16 frame_len, u16 subtype) if (frame_len < 8 + rates_len) return; - if (status == C80211_MGMT_SC_Success) { - if (subtype == C80211_SUBTYPE_MGMT_ASS_RESPONSE) + if (status == WLAN_STATUS_SUCCESS) { + if (subtype == IEEE80211_STYPE_ASSOC_RESP) priv->AssociationRequestRetryCnt = 0; else priv->ReAssociationRequestRetryCnt = 0; @@ -3178,9 +3140,9 @@ static void associate(struct atmel_private *priv, u16 frame_len, u16 subtype) return; } - if (subtype == C80211_SUBTYPE_MGMT_ASS_RESPONSE && - status != C80211_MGMT_SC_AssDeniedBSSRate && - status != C80211_MGMT_SC_SupportCapabilities && + if (subtype == IEEE80211_STYPE_ASSOC_RESP && + status != WLAN_STATUS_ASSOC_DENIED_RATES && + status != WLAN_STATUS_CAPS_UNSUPPORTED && priv->AssociationRequestRetryCnt < MAX_ASSOCIATION_RETRIES) { mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); priv->AssociationRequestRetryCnt++; @@ -3188,9 +3150,9 @@ static void associate(struct atmel_private *priv, u16 frame_len, u16 subtype) return; } - if (subtype == C80211_SUBTYPE_MGMT_REASS_RESPONSE && - status != C80211_MGMT_SC_AssDeniedBSSRate && - status != C80211_MGMT_SC_SupportCapabilities && + if (subtype == IEEE80211_STYPE_REASSOC_RESP && + status != WLAN_STATUS_ASSOC_DENIED_RATES && + status != WLAN_STATUS_CAPS_UNSUPPORTED && priv->AssociationRequestRetryCnt < MAX_ASSOCIATION_RETRIES) { mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); priv->ReAssociationRequestRetryCnt++; @@ -3325,8 +3287,8 @@ static void atmel_management_frame(struct atmel_private *priv, subtype = le16_to_cpu(header->frame_ctl) & IEEE80211_FCTL_STYPE; switch (subtype) { - case C80211_SUBTYPE_MGMT_BEACON: - case C80211_SUBTYPE_MGMT_ProbeResponse: + case IEEE80211_STYPE_BEACON: + case IEEE80211_STYPE_PROBE_RESP: /* beacon frame has multiple variable-length fields - never let an engineer loose with a data structure design. */ @@ -3384,19 +3346,19 @@ static void atmel_management_frame(struct atmel_private *priv, beacon_interval, channel, rssi, ssid_length, &beacon->rates_el_id, - subtype == C80211_SUBTYPE_MGMT_BEACON); + subtype == IEEE80211_STYPE_BEACON); } break; - case C80211_SUBTYPE_MGMT_Authentication: + case IEEE80211_STYPE_AUTH: if (priv->station_state == STATION_STATE_AUTHENTICATING) authenticate(priv, frame_len); break; - case C80211_SUBTYPE_MGMT_ASS_RESPONSE: - case C80211_SUBTYPE_MGMT_REASS_RESPONSE: + case IEEE80211_STYPE_ASSOC_RESP: + case IEEE80211_STYPE_REASSOC_RESP: if (priv->station_state == STATION_STATE_ASSOCIATING || priv->station_state == STATION_STATE_REASSOCIATING) @@ -3404,7 +3366,7 @@ static void atmel_management_frame(struct atmel_private *priv, break; - case C80211_SUBTYPE_MGMT_DISASSOSIATION: + case IEEE80211_STYPE_DISASSOC: if (priv->station_is_associated && priv->operating_mode == IW_MODE_INFRA && is_frame_from_current_bss(priv, header)) { @@ -3417,7 +3379,7 @@ static void atmel_management_frame(struct atmel_private *priv, break; - case C80211_SUBTYPE_MGMT_Deauthentication: + case IEEE80211_STYPE_DEAUTH: if (priv->operating_mode == IW_MODE_INFRA && is_frame_from_current_bss(priv, header)) { priv->station_was_associated = 0; @@ -3453,12 +3415,12 @@ static void atmel_management_timer(u_long a) priv->AuthenticationRequestRetryCnt = 0; restart_search(priv); } else { - int auth = C80211_MGMT_AAN_OPENSYSTEM; + int auth = WLAN_AUTH_OPEN; priv->AuthenticationRequestRetryCnt++; priv->CurrentAuthentTransactionSeqNum = 0x0001; mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); if (priv->wep_is_on && priv->exclude_unencrypted) - auth = C80211_MGMT_AAN_SHAREDKEY; + auth = WLAN_AUTH_SHARED_KEY; send_authentication_request(priv, auth, NULL, 0); } break; @@ -3558,14 +3520,14 @@ static void atmel_command_irq(struct atmel_private *priv) priv->station_was_associated = priv->station_is_associated; atmel_enter_state(priv, STATION_STATE_READY); } else { - int auth = C80211_MGMT_AAN_OPENSYSTEM; + int auth = WLAN_AUTH_OPEN; priv->AuthenticationRequestRetryCnt = 0; atmel_enter_state(priv, STATION_STATE_AUTHENTICATING); mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES); priv->CurrentAuthentTransactionSeqNum = 0x0001; if (priv->wep_is_on && priv->exclude_unencrypted) - auth = C80211_MGMT_AAN_SHAREDKEY; + auth = WLAN_AUTH_SHARED_KEY; send_authentication_request(priv, auth, NULL, 0); } return; diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 44024c76d1871a3bb6696227b2def267ac475231..ed37141319ea9b8ecc64c8834b81b471198f0612 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -5533,8 +5533,8 @@ static int ipw_best_network(struct ipw_priv *priv, return 0; } - if (!priv->ieee->wpa_enabled && (network->wpa_ie_len > 0 || - network->rsn_ie_len > 0)) { + if (priv->ieee->wpa_enabled && + network->wpa_ie_len == 0 && network->rsn_ie_len == 0) { IPW_DEBUG_ASSOC("Network '%s (" MAC_FMT ")' excluded " "because of WPA capability mismatch.\n", escape_essid(network->ssid, network->ssid_len), @@ -7061,8 +7061,7 @@ static int ipw_associate_network(struct ipw_priv *priv, priv->assoc_request.auth_type = AUTH_SHARED_KEY; priv->assoc_request.auth_key = priv->ieee->sec.active_key; - if ((priv->ieee->sec.level == SEC_LEVEL_1) && - !(priv->ieee->host_encrypt || priv->ieee->host_decrypt)) + if (priv->ieee->sec.level == SEC_LEVEL_1) ipw_send_wep_keys(priv, DCW_WEP_KEY_SEC_TYPE_WEP); } else if ((priv->capability & CAP_PRIVACY_ON) && diff --git a/net/ieee80211/ieee80211_geo.c b/net/ieee80211/ieee80211_geo.c index 3027153940fcb48e99ed3fc0311bc9632165969f..192243ab35ed2fce2c9d377aca926657e58a70dc 100644 --- a/net/ieee80211/ieee80211_geo.c +++ b/net/ieee80211/ieee80211_geo.c @@ -50,7 +50,8 @@ int ieee80211_is_valid_channel(struct ieee80211_device *ieee, u8 channel) /* Driver needs to initialize the geography map before using * these helper functions */ - BUG_ON(ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0); + if (ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0) + return 0; if (ieee->freq_band & IEEE80211_24GHZ_BAND) for (i = 0; i < ieee->geo.bg_channels; i++) @@ -78,7 +79,8 @@ int ieee80211_channel_to_index(struct ieee80211_device *ieee, u8 channel) /* Driver needs to initialize the geography map before using * these helper functions */ - BUG_ON(ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0); + if (ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0) + return -1; if (ieee->freq_band & IEEE80211_24GHZ_BAND) for (i = 0; i < ieee->geo.bg_channels; i++) @@ -99,7 +101,8 @@ u8 ieee80211_freq_to_channel(struct ieee80211_device * ieee, u32 freq) /* Driver needs to initialize the geography map before using * these helper functions */ - BUG_ON(ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0); + if (ieee->geo.bg_channels == 0 && ieee->geo.a_channels == 0) + return 0; freq /= 100000; diff --git a/net/ieee80211/ieee80211_module.c b/net/ieee80211/ieee80211_module.c index 5f67c684afc24643e3d3eaee23482b05c9eabdb4..2cb84d84f67136f08dd1c847893ee223ddbc6882 100644 --- a/net/ieee80211/ieee80211_module.c +++ b/net/ieee80211/ieee80211_module.c @@ -213,7 +213,7 @@ void free_ieee80211(struct net_device *dev) static int debug = 0; u32 ieee80211_debug_level = 0; -struct proc_dir_entry *ieee80211_proc = NULL; +static struct proc_dir_entry *ieee80211_proc = NULL; static int show_debug_level(char *page, char **start, off_t offset, int count, int *eof, void *data) diff --git a/net/ieee80211/ieee80211_wx.c b/net/ieee80211/ieee80211_wx.c index e8c55a4d58344e6a57ca7a0a1a7f965b84506337..af7f9bbfd18ab0aacf33dc423fc7452806305bed 100644 --- a/net/ieee80211/ieee80211_wx.c +++ b/net/ieee80211/ieee80211_wx.c @@ -193,33 +193,21 @@ static char *ipw2100_translate_scan(struct ieee80211_device *ieee, if (iwe.u.data.length) start = iwe_stream_add_point(start, stop, &iwe, custom); + memset(&iwe, 0, sizeof(iwe)); if (network->wpa_ie_len) { - char buf[MAX_WPA_IE_LEN * 2 + 30]; - - u8 *p = buf; - p += sprintf(p, "wpa_ie="); - for (i = 0; i < network->wpa_ie_len; i++) { - p += sprintf(p, "%02x", network->wpa_ie[i]); - } - - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = strlen(buf); + char buf[MAX_WPA_IE_LEN]; + memcpy(buf, network->wpa_ie, network->wpa_ie_len); + iwe.cmd = IWEVGENIE; + iwe.u.data.length = network->wpa_ie_len; start = iwe_stream_add_point(start, stop, &iwe, buf); } + memset(&iwe, 0, sizeof(iwe)); if (network->rsn_ie_len) { - char buf[MAX_WPA_IE_LEN * 2 + 30]; - - u8 *p = buf; - p += sprintf(p, "rsn_ie="); - for (i = 0; i < network->rsn_ie_len; i++) { - p += sprintf(p, "%02x", network->rsn_ie[i]); - } - - memset(&iwe, 0, sizeof(iwe)); - iwe.cmd = IWEVCUSTOM; - iwe.u.data.length = strlen(buf); + char buf[MAX_WPA_IE_LEN]; + memcpy(buf, network->rsn_ie, network->rsn_ie_len); + iwe.cmd = IWEVGENIE; + iwe.u.data.length = network->rsn_ie_len; start = iwe_stream_add_point(start, stop, &iwe, buf); }