diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 8b3aa4ca59a2228f522876902c601a44deb73661..1b8a45a4642a504086603b71e2d49aee7dbf8a1d 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -203,12 +203,6 @@ config MACH_OMAP3_TORPEDO
 	 for full description please see the products webpage at
 	 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
 
-config MACH_OVERO
-	bool "Gumstix Overo board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ff634a1c26f563b2fd8a386efb9b6fcdf9be5ab5..a60e986897137e7e666b4b2a437a683e45cbce43 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -246,7 +246,6 @@ obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
 obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
 obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
-obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o sdram-nokia.o
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
deleted file mode 100644
index 2dae6ccd39bb9757956279a08399257cd4bcfc26..0000000000000000000000000000000000000000
--- a/arch/arm/mach-omap2/board-overo.c
+++ /dev/null
@@ -1,571 +0,0 @@
-/*
- * board-overo.c (Gumstix Overo)
- *
- * Initial code: Steve Sakoman <steve@sakoman.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/spi/spi.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "common.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "gpmc.h"
-#include "hsmmc.h"
-#include "board-flash.h"
-#include "common-board-devices.h"
-
-#define	NAND_CS			0
-
-#define OVERO_GPIO_BT_XGATE	15
-#define OVERO_GPIO_W2W_NRESET	16
-#define OVERO_GPIO_PENDOWN	114
-#define OVERO_GPIO_BT_NRESET	164
-#define OVERO_GPIO_USBH_CPEN	168
-#define OVERO_GPIO_USBH_NRESET	183
-
-#define OVERO_SMSC911X_CS      5
-#define OVERO_SMSC911X_GPIO    176
-#define OVERO_SMSC911X_NRESET  64
-#define OVERO_SMSC911X2_CS     4
-#define OVERO_SMSC911X2_GPIO   65
-
-/* whether to register LCD35 instead of LCD43 */
-static bool overo_use_lcd35;
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
-	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
-/* fixed regulator for ads7846 */
-static struct regulator_consumer_supply ads7846_supply[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-static struct regulator_init_data vads7846_regulator = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ads7846_supply),
-	.consumer_supplies	= ads7846_supply,
-};
-
-static struct fixed_voltage_config vads7846 = {
-	.supply_name		= "vads7846",
-	.microvolts		= 3300000, /* 3.3V */
-	.gpio			= -EINVAL,
-	.startup_delay		= 0,
-	.init_data		= &vads7846_regulator,
-};
-
-static struct platform_device vads7846_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &vads7846,
-	},
-};
-
-static void __init overo_ads7846_init(void)
-{
-	omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL);
-	platform_device_register(&vads7846_device);
-}
-
-#else
-static inline void __init overo_ads7846_init(void) { return; }
-#endif
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-
-#include <linux/smsc911x.h>
-#include "gpmc-smsc911x.h"
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.id		= 0,
-	.cs             = OVERO_SMSC911X_CS,
-	.gpio_irq       = OVERO_SMSC911X_GPIO,
-	.gpio_reset     = OVERO_SMSC911X_NRESET,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static struct omap_smsc911x_platform_data smsc911x2_cfg = {
-	.id		= 1,
-	.cs             = OVERO_SMSC911X2_CS,
-	.gpio_irq       = OVERO_SMSC911X2_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static void __init overo_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&smsc911x_cfg);
-	gpmc_smsc911x_init(&smsc911x2_cfg);
-}
-
-#else
-static inline void __init overo_init_smsc911x(void) { return; }
-#endif
-
-/* DSS */
-#define OVERO_GPIO_LCD_EN 144
-#define OVERO_GPIO_LCD_BL 145
-
-static struct connector_atv_platform_data overo_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.invert_polarity = false,
-};
-
-static struct platform_device overo_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &overo_tv_pdata,
-};
-
-static const struct display_timing overo_lcd43_videomode = {
-	.pixelclock	= { 0, 9200000, 0 },
-
-	.hactive = { 0, 480, 0 },
-	.hfront_porch = { 0, 8, 0 },
-	.hback_porch = { 0, 4, 0 },
-	.hsync_len = { 0, 41, 0 },
-
-	.vactive = { 0, 272, 0 },
-	.vfront_porch = { 0, 4, 0 },
-	.vback_porch = { 0, 2, 0 },
-	.vsync_len = { 0, 10, 0 },
-
-	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
-		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
-};
-
-static struct panel_dpi_platform_data overo_lcd43_pdata = {
-	.name                   = "lcd43",
-	.source                 = "dpi.0",
-
-	.data_lines		= 24,
-
-	.display_timing		= &overo_lcd43_videomode,
-
-	.enable_gpio		= OVERO_GPIO_LCD_EN,
-	.backlight_gpio		= OVERO_GPIO_LCD_BL,
-};
-
-static struct platform_device overo_lcd43_device = {
-	.name                   = "panel-dpi",
-	.id                     = 0,
-	.dev.platform_data      = &overo_lcd43_pdata,
-};
-
-static struct connector_dvi_platform_data overo_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = 3,
-};
-
-static struct platform_device overo_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &overo_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data overo_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = -1,
-};
-
-static struct platform_device overo_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &overo_tfp410_pdata,
-};
-
-static struct omap_dss_board_info overo_dss_data = {
-	.default_display_name = "lcd43",
-};
-
-static void __init overo_display_init(void)
-{
-	omap_display_init(&overo_dss_data);
-
-	if (!overo_use_lcd35)
-		platform_device_register(&overo_lcd43_device);
-	platform_device_register(&overo_tfp410_device);
-	platform_device_register(&overo_dvi_connector_device);
-	platform_device_register(&overo_tv_connector_device);
-}
-
-static struct mtd_partition overo_nand_partitions[] = {
-	{
-		.name           = "xloader",
-		.offset         = 0,			/* Offset = 0x00000 */
-		.size           = 4 * NAND_BLOCK_SIZE,
-		.mask_flags     = MTD_WRITEABLE
-	},
-	{
-		.name           = "uboot",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size           = 14 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "uboot environment",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x240000 */
-		.size           = 2 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "linux",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
-		.size           = 32 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.transceiver	= true,
-		.ocr_mask	= 0x00100000,	/* 3.3V */
-	},
-	{}	/* Terminator */
-};
-
-static struct regulator_consumer_supply overo_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "overo:red:gpio21",
-		.default_trigger	= "heartbeat",
-		.gpio			= 21,
-		.active_low		= true,
-	},
-	{
-		.name			= "overo:blue:gpio22",
-		.default_trigger	= "none",
-		.gpio			= 22,
-		.active_low		= true,
-	},
-	{
-		.name			= "overo:blue:COM",
-		.default_trigger	= "mmc0",
-		.gpio			= -EINVAL,	/* gets replaced */
-		.active_low		= true,
-	},
-};
-
-static struct gpio_led_platform_data gpio_leds_pdata = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device gpio_leds_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_leds_pdata,
-	},
-};
-
-static void __init overo_init_led(void)
-{
-	platform_device_register(&gpio_leds_device);
-}
-
-#else
-static inline void __init overo_init_led(void) { return; }
-#endif
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-static struct gpio_keys_button gpio_buttons[] = {
-	{
-		.code			= BTN_0,
-		.gpio			= 23,
-		.desc			= "button0",
-		.wakeup			= 1,
-	},
-	{
-		.code			= BTN_1,
-		.gpio			= 14,
-		.desc			= "button1",
-		.wakeup			= 1,
-	},
-};
-
-static struct gpio_keys_platform_data gpio_keys_pdata = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_keys_pdata,
-	},
-};
-
-static void __init overo_init_keys(void)
-{
-	platform_device_register(&gpio_keys_device);
-}
-
-#else
-static inline void __init overo_init_keys(void) { return; }
-#endif
-
-static int overo_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-#endif
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data overo_gpio_data = {
-	.use_leds	= true,
-	.setup		= overo_twl_gpio_setup,
-};
-
-static struct regulator_init_data overo_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(overo_vmmc1_supply),
-	.consumer_supplies	= overo_vmmc1_supply,
-};
-
-static struct twl4030_platform_data overo_twldata = {
-	.gpio		= &overo_gpio_data,
-	.vmmc1		= &overo_vmmc1,
-};
-
-static int __init overo_i2c_init(void)
-{
-	omap3_pmic_get_config(&overo_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	overo_twldata.vpll2->constraints.name = "VDVI";
-
-	omap3_pmic_init("tps65950", &overo_twldata);
-	/* i2c2 pins are used for gpio */
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static struct panel_lb035q02_platform_data overo_lcd35_pdata = {
-	.name                   = "lcd35",
-	.source                 = "dpi.0",
-
-	.data_lines		= 24,
-
-	.enable_gpio		= OVERO_GPIO_LCD_EN,
-	.backlight_gpio		= OVERO_GPIO_LCD_BL,
-};
-
-/*
- * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The
- * selection is done based on the overo_use_lcd35 field. If new SPI
- * devices are added here, extra work is needed to make only the lgphilips panel
- * affected by the overo_use_lcd35 field.
- */
-static struct spi_board_info overo_spi_board_info[] __initdata = {
-	{
-		.modalias		= "panel_lgphilips_lb035q02",
-		.bus_num		= 1,
-		.chip_select		= 1,
-		.max_speed_hz		= 500000,
-		.mode			= SPI_MODE_3,
-		.platform_data		= &overo_lcd35_pdata,
-	},
-};
-
-static int __init overo_spi_init(void)
-{
-	overo_ads7846_init();
-
-	if (overo_use_lcd35) {
-		spi_register_board_info(overo_spi_board_info,
-				ARRAY_SIZE(overo_spi_board_info));
-	}
-	return 0;
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 2,
-		.reset_gpio = OVERO_GPIO_USBH_NRESET,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct gpio overo_bt_gpios[] __initdata = {
-	{ OVERO_GPIO_BT_XGATE,	GPIOF_OUT_INIT_LOW,	"lcd enable"    },
-	{ OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH,	"lcd bl enable" },
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
-};
-
-static void __init overo_init(void)
-{
-	int ret;
-
-	if (strstr(boot_command_line, "omapdss.def_disp=lcd35"))
-		overo_use_lcd35 = true;
-
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	overo_i2c_init();
-	omap_hsmmc_init(mmc);
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-	board_nand_init(overo_nand_partitions,
-			ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-	overo_spi_init();
-	overo_init_smsc911x();
-	overo_init_led();
-	overo_init_keys();
-	omap_twl4030_audio_init("overo", NULL);
-
-	overo_display_init();
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
-	ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH,
-			       "OVERO_GPIO_W2W_NRESET");
-	if (ret == 0) {
-		gpio_export(OVERO_GPIO_W2W_NRESET, 0);
-		gpio_set_value(OVERO_GPIO_W2W_NRESET, 0);
-		udelay(10);
-		gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
-	} else {
-		pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n");
-	}
-
-	ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
-	if (ret) {
-		pr_err("%s: could not obtain BT gpios\n", __func__);
-	} else {
-		gpio_export(OVERO_GPIO_BT_XGATE, 0);
-		gpio_export(OVERO_GPIO_BT_NRESET, 0);
-		gpio_set_value(OVERO_GPIO_BT_NRESET, 0);
-		mdelay(6);
-		gpio_set_value(OVERO_GPIO_BT_NRESET, 1);
-	}
-
-	ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH,
-			       "OVERO_GPIO_USBH_CPEN");
-	if (ret == 0)
-		gpio_export(OVERO_GPIO_USBH_CPEN, 0);
-	else
-		pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n");
-}
-
-MACHINE_START(OVERO, "Gumstix Overo")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= overo_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END