From 70cf15335eb35d562a4ec6d8860611c87f775cf2 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 2 Aug 2010 15:53:14 +0200 Subject: [PATCH] ath9k: use AP beacon miss as a trigger for fast recalibration When beacons get stuck in AP mode, the most likely cause is interference. Such interference can often go on for a while, and too many consecutive beacon misses can lead to connected clients getting dropped. Since connected clients might not be subjected to the same interference if that happens to be very local, the AP should try to deal with it as good as it can. One way to do this is to trigger an NF calibration with automatic baseband update right after the beacon miss. In my tests with very strong interference, this allowed the AP to continue transmitting beacons after only 2-3 misses, which allows a normal client to stay connected. With some of the newer - really sensitive - chips, the maximum noise floor limit is very low, which can be problematic during very strong interference. To avoid an endless loop of stuck beacons -> nfcal -> periodic calibration -> stuck beacons, the beacon miss event also sets a flag, which allows the calibration code to bypass the chip specific maximum NF value. This flag is automatically cleared, as soon as the first NF median goes back below the limits for all chains. In my tests, this allowed an ath9k AP to survive very strong interference (measured NF: -68, or sometimes even higher) without losing connectivity to its clients. Even under these conditions, I was able to transmit several mbits/s through the interface. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/beacon.c | 1 + drivers/net/wireless/ath/ath9k/calib.c | 66 +++++++++++++++++++++++-- drivers/net/wireless/ath/ath9k/calib.h | 1 + drivers/net/wireless/ath/ath9k/hw.h | 1 + 4 files changed, 65 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 102f1234f794..081192e78a46 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -362,6 +362,7 @@ void ath_beacon_tasklet(unsigned long data) ath_print(common, ATH_DBG_BSTUCK, "missed %u consecutive beacons\n", sc->beacon.bmisscnt); + ath9k_hw_bstuck_nfcal(ah); } else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) { ath_print(common, ATH_DBG_BSTUCK, "beacon is officially stuck\n"); diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c index ccb1b2eae85e..67ee5d735cc1 100644 --- a/drivers/net/wireless/ath/ath9k/calib.c +++ b/drivers/net/wireless/ath/ath9k/calib.c @@ -65,12 +65,16 @@ static s16 ath9k_hw_get_default_nf(struct ath_hw *ah, static void ath9k_hw_update_nfcal_hist_buffer(struct ath_hw *ah, - struct ath9k_nfcal_hist *h, + struct ath9k_hw_cal_data *cal, int16_t *nfarray) { + struct ath_common *common = ath9k_hw_common(ah); struct ath_nf_limits *limit; + struct ath9k_nfcal_hist *h; + bool high_nf_mid = false; int i; + h = cal->nfCalHist; limit = ath9k_hw_get_nf_limits(ah, ah->curchan); for (i = 0; i < NUM_NF_READINGS; i++) { @@ -87,9 +91,38 @@ static void ath9k_hw_update_nfcal_hist_buffer(struct ath_hw *ah, ath9k_hw_get_nf_hist_mid(h[i].nfCalBuffer); } - if (h[i].privNF > limit->max) - h[i].privNF = limit->max; + if (!h[i].privNF) + continue; + + if (h[i].privNF > limit->max) { + high_nf_mid = true; + + ath_print(common, ATH_DBG_CALIBRATE, + "NFmid[%d] (%d) > MAX (%d), %s\n", + i, h[i].privNF, limit->max, + (cal->nfcal_interference ? + "not corrected (due to interference)" : + "correcting to MAX")); + + /* + * Normally we limit the average noise floor by the + * hardware specific maximum here. However if we have + * encountered stuck beacons because of interference, + * we bypass this limit here in order to better deal + * with our environment. + */ + if (!cal->nfcal_interference) + h[i].privNF = limit->max; + } } + + /* + * If the noise floor seems normal for all chains, assume that + * there is no significant interference in the environment anymore. + * Re-enable the enforcement of the NF maximum again. + */ + if (!high_nf_mid) + cal->nfcal_interference = false; } static bool ath9k_hw_get_nf_thresh(struct ath_hw *ah, @@ -339,7 +372,7 @@ bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan) h = caldata->nfCalHist; caldata->nfcal_pending = false; - ath9k_hw_update_nfcal_hist_buffer(ah, h, nfarray); + ath9k_hw_update_nfcal_hist_buffer(ah, caldata, nfarray); caldata->rawNoiseFloor = h[0].privNF; return true; } @@ -374,3 +407,28 @@ s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan) return ah->caldata->rawNoiseFloor; } EXPORT_SYMBOL(ath9k_hw_getchan_noise); + +void ath9k_hw_bstuck_nfcal(struct ath_hw *ah) +{ + struct ath9k_hw_cal_data *caldata = ah->caldata; + + if (unlikely(!caldata)) + return; + + /* + * If beacons are stuck, the most likely cause is interference. + * Triggering a noise floor calibration at this point helps the + * hardware adapt to a noisy environment much faster. + * To ensure that we recover from stuck beacons quickly, let + * the baseband update the internal NF value itself, similar to + * what is being done after a full reset. + */ + if (!caldata->nfcal_pending) + ath9k_hw_start_nfcal(ah, true); + else if (!(REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF)) + ath9k_hw_getnf(ah, ah->curchan); + + caldata->nfcal_interference = true; +} +EXPORT_SYMBOL(ath9k_hw_bstuck_nfcal); + diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h index 0a304b3eeeb6..5b053a6260b2 100644 --- a/drivers/net/wireless/ath/ath9k/calib.h +++ b/drivers/net/wireless/ath/ath9k/calib.h @@ -113,6 +113,7 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan); bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan); void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah, struct ath9k_channel *chan); +void ath9k_hw_bstuck_nfcal(struct ath_hw *ah); s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan); void ath9k_hw_reset_calibration(struct ath_hw *ah, struct ath9k_cal_list *currCal); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 399f7c1283cd..1601dd439890 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -355,6 +355,7 @@ struct ath9k_hw_cal_data { int16_t rawNoiseFloor; bool paprd_done; bool nfcal_pending; + bool nfcal_interference; u16 small_signal_gain[AR9300_MAX_CHAINS]; u32 pa_table[AR9300_MAX_CHAINS][PAPRD_TABLE_SZ]; struct ath9k_nfcal_hist nfCalHist[NUM_NF_READINGS]; -- GitLab