From 7086400d87a06588c13270949db9134afc9553ba Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Wed, 27 Apr 2011 09:13:56 +0000 Subject: [PATCH] ixgbe: Combine SFP and multi-speed fiber task into single service task This change is meant to address several race conditions with multi-speed fiber SFP+ modules in 82599 adapters. Specifically issues have been seen in which both the SFP configuration and the multi-speed fiber configuration are running simultaneously which will result in the device getting into an erroneous link down state. Signed-off-by: Alexander Duyck Tested-by: Evan Swanson Signed-off-by: Jeff Kirsher --- drivers/net/ixgbe/ixgbe.h | 26 +-- drivers/net/ixgbe/ixgbe_main.c | 388 +++++++++++++++++---------------- 2 files changed, 213 insertions(+), 201 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index ec948ffec553..cbb04ba58289 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -367,19 +367,20 @@ struct ixgbe_adapter { #define IXGBE_FLAG_VMDQ_ENABLED (u32)(1 << 19) #define IXGBE_FLAG_FAN_FAIL_CAPABLE (u32)(1 << 20) #define IXGBE_FLAG_NEED_LINK_UPDATE (u32)(1 << 22) -#define IXGBE_FLAG_IN_SFP_LINK_TASK (u32)(1 << 23) -#define IXGBE_FLAG_IN_SFP_MOD_TASK (u32)(1 << 24) -#define IXGBE_FLAG_FDIR_HASH_CAPABLE (u32)(1 << 25) -#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE (u32)(1 << 26) -#define IXGBE_FLAG_FCOE_CAPABLE (u32)(1 << 27) -#define IXGBE_FLAG_FCOE_ENABLED (u32)(1 << 28) -#define IXGBE_FLAG_SRIOV_CAPABLE (u32)(1 << 29) -#define IXGBE_FLAG_SRIOV_ENABLED (u32)(1 << 30) +#define IXGBE_FLAG_NEED_LINK_CONFIG (u32)(1 << 23) +#define IXGBE_FLAG_FDIR_HASH_CAPABLE (u32)(1 << 24) +#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE (u32)(1 << 25) +#define IXGBE_FLAG_FCOE_CAPABLE (u32)(1 << 26) +#define IXGBE_FLAG_FCOE_ENABLED (u32)(1 << 27) +#define IXGBE_FLAG_SRIOV_CAPABLE (u32)(1 << 28) +#define IXGBE_FLAG_SRIOV_ENABLED (u32)(1 << 29) u32 flags2; #define IXGBE_FLAG2_RSC_CAPABLE (u32)(1) #define IXGBE_FLAG2_RSC_ENABLED (u32)(1 << 1) #define IXGBE_FLAG2_TEMP_SENSOR_CAPABLE (u32)(1 << 2) +#define IXGBE_FLAG2_SEARCH_FOR_SFP (u32)(1 << 4) +#define IXGBE_FLAG2_SFP_NEEDS_RESET (u32)(1 << 5) unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; u16 bd_number; @@ -455,13 +456,11 @@ struct ixgbe_adapter { struct work_struct reset_task; struct work_struct watchdog_task; - struct work_struct sfp_task; - struct work_struct multispeed_fiber_task; - struct work_struct sfp_config_module_task; struct work_struct fdir_reinit_task; struct work_struct check_overtemp_task; + struct work_struct service_task; struct timer_list watchdog_timer; - struct timer_list sfp_timer; + struct timer_list service_timer; u32 fdir_pballoc; u32 atr_sample_rate; spinlock_t fdir_perfect_lock; @@ -492,7 +491,8 @@ enum ixbge_state_t { __IXGBE_TESTING, __IXGBE_RESETTING, __IXGBE_DOWN, - __IXGBE_SFP_MODULE_NOT_FOUND + __IXGBE_SERVICE_SCHED, + __IXGBE_IN_SFP_INIT, }; struct ixgbe_rsc_cb { diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index f8196e0d2745..a5d4226eee0c 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -191,6 +191,22 @@ static inline void ixgbe_disable_sriov(struct ixgbe_adapter *adapter) adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED; } +static void ixgbe_service_event_schedule(struct ixgbe_adapter *adapter) +{ + if (!test_bit(__IXGBE_DOWN, &adapter->state) && + !test_and_set_bit(__IXGBE_SERVICE_SCHED, &adapter->state)) + schedule_work(&adapter->service_task); +} + +static void ixgbe_service_event_complete(struct ixgbe_adapter *adapter) +{ + BUG_ON(!test_bit(__IXGBE_SERVICE_SCHED, &adapter->state)); + + /* flush memory to make sure state is correct before next watchog */ + smp_mb__before_clear_bit(); + clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state); +} + struct ixgbe_reg_info { u32 ofs; char *name; @@ -1858,15 +1874,19 @@ static void ixgbe_check_sfp_event(struct ixgbe_adapter *adapter, u32 eicr) if (eicr & IXGBE_EICR_GPI_SDP2) { /* Clear the interrupt */ IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2); - if (!test_bit(__IXGBE_DOWN, &adapter->state)) - schedule_work(&adapter->sfp_config_module_task); + if (!test_bit(__IXGBE_DOWN, &adapter->state)) { + adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; + ixgbe_service_event_schedule(adapter); + } } if (eicr & IXGBE_EICR_GPI_SDP1) { /* Clear the interrupt */ IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1); - if (!test_bit(__IXGBE_DOWN, &adapter->state)) - schedule_work(&adapter->multispeed_fiber_task); + if (!test_bit(__IXGBE_DOWN, &adapter->state)) { + adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; + ixgbe_service_event_schedule(adapter); + } } } @@ -1937,8 +1957,10 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data) ixgbe_check_fan_failure(adapter, eicr); + /* re-enable the original interrupt state, no lsc, no queues */ if (!test_bit(__IXGBE_DOWN, &adapter->state)) - IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_OTHER); + IXGBE_WRITE_REG(hw, IXGBE_EIMS, eicr & + ~(IXGBE_EIMS_LSC | IXGBE_EIMS_RTX_QUEUE)); return IRQ_HANDLED; } @@ -3772,31 +3794,16 @@ static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw) **/ static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter) { - struct ixgbe_hw *hw = &adapter->hw; + /* + * We are assuming the worst case scenerio here, and that + * is that an SFP was inserted/removed after the reset + * but before SFP detection was enabled. As such the best + * solution is to just start searching as soon as we start + */ + if (adapter->hw.mac.type == ixgbe_mac_82598EB) + adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP; - if (hw->phy.multispeed_fiber) { - /* - * In multispeed fiber setups, the device may not have - * had a physical connection when the driver loaded. - * If that's the case, the initial link configuration - * couldn't get the MAC into 10G or 1G mode, so we'll - * never have a link status change interrupt fire. - * We need to try and force an autonegotiation - * session, then bring up link. - */ - if (hw->mac.ops.setup_sfp) - hw->mac.ops.setup_sfp(hw); - if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK)) - schedule_work(&adapter->multispeed_fiber_task); - } else { - /* - * Direct Attach Cu and non-multispeed fiber modules - * still need to be configured properly prior to - * attempting link. - */ - if (!(adapter->flags & IXGBE_FLAG_IN_SFP_MOD_TASK)) - schedule_work(&adapter->sfp_config_module_task); - } + adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; } /** @@ -3926,17 +3933,6 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) e_crit(drv, "Fan has stopped, replace the adapter\n"); } - /* - * For hot-pluggable SFP+ devices, a new SFP+ module may have - * arrived before interrupts were enabled but after probe. Such - * devices wouldn't have their type identified yet. We need to - * kick off the SFP+ module setup first, then try to bring up link. - * If we're not hot-pluggable SFP+, we just need to configure link - * and bring it up. - */ - if (hw->phy.type == ixgbe_phy_none) - schedule_work(&adapter->sfp_config_module_task); - /* enable transmits */ netif_tx_start_all_queues(adapter->netdev); @@ -3945,6 +3941,7 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; adapter->link_check_timeout = jiffies; mod_timer(&adapter->watchdog_timer, jiffies); + mod_timer(&adapter->service_timer, jiffies); /* Set PF Reset Done bit so PF/VF Mail Ops can work */ ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); @@ -3957,6 +3954,9 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) void ixgbe_reinit_locked(struct ixgbe_adapter *adapter) { WARN_ON(in_interrupt()); + /* put off any impending NetWatchDogTimeout */ + adapter->netdev->trans_start = jiffies; + while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) usleep_range(1000, 2000); ixgbe_down(adapter); @@ -3985,10 +3985,20 @@ void ixgbe_reset(struct ixgbe_adapter *adapter) struct ixgbe_hw *hw = &adapter->hw; int err; + /* lock SFP init bit to prevent race conditions with the watchdog */ + while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + usleep_range(1000, 2000); + + /* clear all SFP and link config related flags while holding SFP_INIT */ + adapter->flags2 &= ~(IXGBE_FLAG2_SEARCH_FOR_SFP | + IXGBE_FLAG2_SFP_NEEDS_RESET); + adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; + err = hw->mac.ops.init_hw(hw); switch (err) { case 0: case IXGBE_ERR_SFP_NOT_PRESENT: + case IXGBE_ERR_SFP_NOT_SUPPORTED: break; case IXGBE_ERR_MASTER_REQUESTS_PENDING: e_dev_err("master disable timed out\n"); @@ -4006,6 +4016,8 @@ void ixgbe_reset(struct ixgbe_adapter *adapter) e_dev_err("Hardware Error: %d\n", err); } + clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); + /* reprogram the RAR[0] in case user changed it. */ hw->mac.ops.set_rar(hw, 0, hw->mac.addr, adapter->num_vfs, IXGBE_RAH_AV); @@ -4167,11 +4179,9 @@ void ixgbe_down(struct ixgbe_adapter *adapter) netif_tx_stop_all_queues(netdev); - clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); - del_timer_sync(&adapter->sfp_timer); del_timer_sync(&adapter->watchdog_timer); cancel_work_sync(&adapter->watchdog_task); - + /* call carrier off first to avoid false dev_watchdog timeouts */ netif_carrier_off(netdev); netif_tx_disable(netdev); @@ -4179,6 +4189,10 @@ void ixgbe_down(struct ixgbe_adapter *adapter) ixgbe_napi_disable_all(adapter); + adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; + + del_timer_sync(&adapter->service_timer); + /* Cleanup the affinity_hint CPU mask memory and callback */ for (i = 0; i < num_q_vectors; i++) { struct ixgbe_q_vector *q_vector = adapter->q_vector[i]; @@ -5147,57 +5161,6 @@ void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter) ixgbe_reset_interrupt_capability(adapter); } -/** - * ixgbe_sfp_timer - worker thread to find a missing module - * @data: pointer to our adapter struct - **/ -static void ixgbe_sfp_timer(unsigned long data) -{ - struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data; - - /* - * Do the sfp_timer outside of interrupt context due to the - * delays that sfp+ detection requires - */ - schedule_work(&adapter->sfp_task); -} - -/** - * ixgbe_sfp_task - worker thread to find a missing module - * @work: pointer to work_struct containing our data - **/ -static void ixgbe_sfp_task(struct work_struct *work) -{ - struct ixgbe_adapter *adapter = container_of(work, - struct ixgbe_adapter, - sfp_task); - struct ixgbe_hw *hw = &adapter->hw; - - if ((hw->phy.type == ixgbe_phy_nl) && - (hw->phy.sfp_type == ixgbe_sfp_type_not_present)) { - s32 ret = hw->phy.ops.identify_sfp(hw); - if (ret == IXGBE_ERR_SFP_NOT_PRESENT) - goto reschedule; - ret = hw->phy.ops.reset(hw); - if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) { - e_dev_err("failed to initialize because an unsupported " - "SFP+ module type was detected.\n"); - e_dev_err("Reload the driver after installing a " - "supported module.\n"); - unregister_netdev(adapter->netdev); - } else { - e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type); - } - /* don't need this routine any more */ - clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); - } - return; -reschedule: - if (test_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state)) - mod_timer(&adapter->sfp_timer, - round_jiffies(jiffies + (2 * HZ))); -} - /** * ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter) * @adapter: board private structure to initialize @@ -6041,65 +6004,6 @@ static void ixgbe_watchdog(unsigned long data) schedule_work(&adapter->watchdog_task); } -/** - * ixgbe_multispeed_fiber_task - worker thread to configure multispeed fiber - * @work: pointer to work_struct containing our data - **/ -static void ixgbe_multispeed_fiber_task(struct work_struct *work) -{ - struct ixgbe_adapter *adapter = container_of(work, - struct ixgbe_adapter, - multispeed_fiber_task); - struct ixgbe_hw *hw = &adapter->hw; - u32 autoneg; - bool negotiation; - - adapter->flags |= IXGBE_FLAG_IN_SFP_LINK_TASK; - autoneg = hw->phy.autoneg_advertised; - if ((!autoneg) && (hw->mac.ops.get_link_capabilities)) - hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation); - hw->mac.autotry_restart = false; - if (hw->mac.ops.setup_link) - hw->mac.ops.setup_link(hw, autoneg, negotiation, true); - adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; - adapter->flags &= ~IXGBE_FLAG_IN_SFP_LINK_TASK; -} - -/** - * ixgbe_sfp_config_module_task - worker thread to configure a new SFP+ module - * @work: pointer to work_struct containing our data - **/ -static void ixgbe_sfp_config_module_task(struct work_struct *work) -{ - struct ixgbe_adapter *adapter = container_of(work, - struct ixgbe_adapter, - sfp_config_module_task); - struct ixgbe_hw *hw = &adapter->hw; - u32 err; - - adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK; - - /* Time for electrical oscillations to settle down */ - msleep(100); - err = hw->phy.ops.identify_sfp(hw); - - if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { - e_dev_err("failed to initialize because an unsupported SFP+ " - "module type was detected.\n"); - e_dev_err("Reload the driver after installing a supported " - "module.\n"); - unregister_netdev(adapter->netdev); - return; - } - if (hw->mac.ops.setup_sfp) - hw->mac.ops.setup_sfp(hw); - - if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK)) - /* This will also work for DA Twinax connections */ - schedule_work(&adapter->multispeed_fiber_task); - adapter->flags &= ~IXGBE_FLAG_IN_SFP_MOD_TASK; -} - /** * ixgbe_fdir_reinit_task - worker thread to reinit FDIR filter table * @work: pointer to work_struct containing our data @@ -6273,6 +6177,141 @@ static void ixgbe_watchdog_task(struct work_struct *work) mutex_unlock(&ixgbe_watchdog_lock); } +/** + * ixgbe_sfp_detection_subtask - poll for SFP+ cable + * @adapter - the ixgbe adapter structure + **/ +static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + s32 err; + + /* not searching for SFP so there is nothing to do here */ + if (!(adapter->flags2 & IXGBE_FLAG2_SEARCH_FOR_SFP) && + !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) + return; + + /* someone else is in init, wait until next service event */ + if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + return; + + err = hw->phy.ops.identify_sfp(hw); + if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto sfp_out; + + if (err == IXGBE_ERR_SFP_NOT_PRESENT) { + /* If no cable is present, then we need to reset + * the next time we find a good cable. */ + adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; + } + + /* exit on error */ + if (err) + goto sfp_out; + + /* exit if reset not needed */ + if (!(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) + goto sfp_out; + + adapter->flags2 &= ~IXGBE_FLAG2_SFP_NEEDS_RESET; + + /* + * A module may be identified correctly, but the EEPROM may not have + * support for that module. setup_sfp() will fail in that case, so + * we should not allow that module to load. + */ + if (hw->mac.type == ixgbe_mac_82598EB) + err = hw->phy.ops.reset(hw); + else + err = hw->mac.ops.setup_sfp(hw); + + if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto sfp_out; + + adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; + e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type); + +sfp_out: + clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); + + if ((err == IXGBE_ERR_SFP_NOT_SUPPORTED) && + (adapter->netdev->reg_state == NETREG_REGISTERED)) { + e_dev_err("failed to initialize because an unsupported " + "SFP+ module type was detected.\n"); + e_dev_err("Reload the driver after installing a " + "supported module.\n"); + unregister_netdev(adapter->netdev); + } +} + +/** + * ixgbe_sfp_link_config_subtask - set up link SFP after module install + * @adapter - the ixgbe adapter structure + **/ +static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 autoneg; + bool negotiation; + + if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_CONFIG)) + return; + + /* someone else is in init, wait until next service event */ + if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + return; + + adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; + + autoneg = hw->phy.autoneg_advertised; + if ((!autoneg) && (hw->mac.ops.get_link_capabilities)) + hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation); + hw->mac.autotry_restart = false; + if (hw->mac.ops.setup_link) + hw->mac.ops.setup_link(hw, autoneg, negotiation, true); + + adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; + adapter->link_check_timeout = jiffies; + clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); +} + +/** + * ixgbe_service_timer - Timer Call-back + * @data: pointer to adapter cast into an unsigned long + **/ +static void ixgbe_service_timer(unsigned long data) +{ + struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data; + unsigned long next_event_offset; + + /* poll faster when waiting for link */ + if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) + next_event_offset = HZ / 10; + else + next_event_offset = HZ * 2; + + /* Reset the timer */ + mod_timer(&adapter->service_timer, next_event_offset + jiffies); + + ixgbe_service_event_schedule(adapter); +} + +/** + * ixgbe_service_task - manages and runs subtasks + * @work: pointer to work_struct containing our data + **/ +static void ixgbe_service_task(struct work_struct *work) +{ + struct ixgbe_adapter *adapter = container_of(work, + struct ixgbe_adapter, + service_task); + + ixgbe_sfp_detection_subtask(adapter); + ixgbe_sfp_link_config_subtask(adapter); + + ixgbe_service_event_complete(adapter); +} + static int ixgbe_tso(struct ixgbe_adapter *adapter, struct ixgbe_ring *tx_ring, struct sk_buff *skb, u32 tx_flags, u8 *hdr_len, __be16 protocol) @@ -7317,22 +7356,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, hw->phy.mdio.mdio_read = ixgbe_mdio_read; hw->phy.mdio.mdio_write = ixgbe_mdio_write; - /* set up this timer and work struct before calling get_invariants - * which might start the timer - */ - init_timer(&adapter->sfp_timer); - adapter->sfp_timer.function = ixgbe_sfp_timer; - adapter->sfp_timer.data = (unsigned long) adapter; - - INIT_WORK(&adapter->sfp_task, ixgbe_sfp_task); - - /* multispeed fiber has its own tasklet, called from GPI SDP1 context */ - INIT_WORK(&adapter->multispeed_fiber_task, ixgbe_multispeed_fiber_task); - - /* a new SFP+ module arrival, called from GPI SDP2 context */ - INIT_WORK(&adapter->sfp_config_module_task, - ixgbe_sfp_config_module_task); - ii->get_invariants(hw); /* setup the private structure */ @@ -7366,17 +7389,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, hw->phy.reset_if_overtemp = false; if (err == IXGBE_ERR_SFP_NOT_PRESENT && hw->mac.type == ixgbe_mac_82598EB) { - /* - * Start a kernel thread to watch for a module to arrive. - * Only do this for 82598, since 82599 will generate - * interrupts on module arrival. - */ - set_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); - mod_timer(&adapter->sfp_timer, - round_jiffies(jiffies + (2 * HZ))); err = 0; } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { - e_dev_err("failed to initialize because an unsupported SFP+ " + e_dev_err("failed to load because an unsupported SFP+ " "module type was detected.\n"); e_dev_err("Reload the driver after installing a supported " "module.\n"); @@ -7468,6 +7483,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, (hw->mac.type == ixgbe_mac_82599EB)))) hw->mac.ops.disable_tx_laser(hw); + setup_timer(&adapter->service_timer, &ixgbe_service_timer, + (unsigned long) adapter); init_timer(&adapter->watchdog_timer); adapter->watchdog_timer.function = ixgbe_watchdog; adapter->watchdog_timer.data = (unsigned long)adapter; @@ -7475,6 +7492,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, INIT_WORK(&adapter->reset_task, ixgbe_reset_task); INIT_WORK(&adapter->watchdog_task, ixgbe_watchdog_task); + INIT_WORK(&adapter->service_task, ixgbe_service_task); + clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state); + err = ixgbe_init_interrupt_scheme(adapter); if (err) goto err_sw_init; @@ -7593,11 +7613,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, err_eeprom: if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) ixgbe_disable_sriov(adapter); - clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); - del_timer_sync(&adapter->sfp_timer); - cancel_work_sync(&adapter->sfp_task); - cancel_work_sync(&adapter->multispeed_fiber_task); - cancel_work_sync(&adapter->sfp_config_module_task); + adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP; iounmap(hw->hw_addr); err_ioremap: free_netdev(netdev); @@ -7625,19 +7641,15 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) struct net_device *netdev = adapter->netdev; set_bit(__IXGBE_DOWN, &adapter->state); + cancel_work_sync(&adapter->service_task); /* * The timers may be rescheduled, so explicitly disable them * from being rescheduled. */ - clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state); del_timer_sync(&adapter->watchdog_timer); - del_timer_sync(&adapter->sfp_timer); cancel_work_sync(&adapter->watchdog_task); - cancel_work_sync(&adapter->sfp_task); - cancel_work_sync(&adapter->multispeed_fiber_task); - cancel_work_sync(&adapter->sfp_config_module_task); if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE || adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) cancel_work_sync(&adapter->fdir_reinit_task); -- GitLab