提交 701d0515 编写于 作者: D Dave Stevenson 提交者: Zheng Zengkai

media: tc358743: Add support for 972Mbit/s link freq.

raspberrypi inclusion
category: feature
bugzilla: 50432

--------------------------------

Adds register setups for running the CSI lanes at 972Mbit/s,
which allows 1080P50 UYVY down 2 lanes.
Signed-off-by: NDave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: NFang Yafen <yafen@iscas.ac.cn>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
上级 68ab5e18
...@@ -1979,6 +1979,7 @@ static int tc358743_probe_of(struct tc358743_state *state) ...@@ -1979,6 +1979,7 @@ static int tc358743_probe_of(struct tc358743_state *state)
/* /*
* The CSI bps per lane must be between 62.5 Mbps and 1 Gbps. * The CSI bps per lane must be between 62.5 Mbps and 1 Gbps.
* The default is 594 Mbps for 4-lane 1080p60 or 2-lane 720p60. * The default is 594 Mbps for 4-lane 1080p60 or 2-lane 720p60.
* 972 Mbps allows 1080P50 UYVY over 2-lane.
*/ */
bps_pr_lane = 2 * endpoint.link_frequencies[0]; bps_pr_lane = 2 * endpoint.link_frequencies[0];
if (bps_pr_lane < 62500000U || bps_pr_lane > 1000000000U) { if (bps_pr_lane < 62500000U || bps_pr_lane > 1000000000U) {
...@@ -1991,12 +1992,15 @@ static int tc358743_probe_of(struct tc358743_state *state) ...@@ -1991,12 +1992,15 @@ static int tc358743_probe_of(struct tc358743_state *state)
state->pdata.refclk_hz * state->pdata.pll_prd; state->pdata.refclk_hz * state->pdata.pll_prd;
/* /*
* FIXME: These timings are from REF_02 for 594 Mbps per lane (297 MHz * FIXME: These timings are from REF_02 for 594 or 972 Mbps per lane
* link frequency). In principle it should be possible to calculate * (297 MHz or 486 MHz link frequency).
* In principle it should be possible to calculate
* them based on link frequency and resolution. * them based on link frequency and resolution.
*/ */
if (bps_pr_lane != 594000000U) switch (bps_pr_lane) {
default:
dev_warn(dev, "untested bps per lane: %u bps\n", bps_pr_lane); dev_warn(dev, "untested bps per lane: %u bps\n", bps_pr_lane);
case 594000000U:
state->pdata.lineinitcnt = 0xe80; state->pdata.lineinitcnt = 0xe80;
state->pdata.lptxtimecnt = 0x003; state->pdata.lptxtimecnt = 0x003;
/* tclk-preparecnt: 3, tclk-zerocnt: 20 */ /* tclk-preparecnt: 3, tclk-zerocnt: 20 */
...@@ -2008,6 +2012,21 @@ static int tc358743_probe_of(struct tc358743_state *state) ...@@ -2008,6 +2012,21 @@ static int tc358743_probe_of(struct tc358743_state *state)
state->pdata.tclk_postcnt = 0x008; state->pdata.tclk_postcnt = 0x008;
state->pdata.ths_trailcnt = 0x2; state->pdata.ths_trailcnt = 0x2;
state->pdata.hstxvregcnt = 0; state->pdata.hstxvregcnt = 0;
break;
case 972000000U:
state->pdata.lineinitcnt = 0x1b58;
state->pdata.lptxtimecnt = 0x007;
/* tclk-preparecnt: 6, tclk-zerocnt: 40 */
state->pdata.tclk_headercnt = 0x2806;
state->pdata.tclk_trailcnt = 0x00;
/* ths-preparecnt: 6, ths-zerocnt: 8 */
state->pdata.ths_headercnt = 0x0806;
state->pdata.twakeup = 0x4268;
state->pdata.tclk_postcnt = 0x008;
state->pdata.ths_trailcnt = 0x5;
state->pdata.hstxvregcnt = 0;
break;
}
state->reset_gpio = devm_gpiod_get_optional(dev, "reset", state->reset_gpio = devm_gpiod_get_optional(dev, "reset",
GPIOD_OUT_LOW); GPIOD_OUT_LOW);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册