Skip to content

K
Kernel

openeuler / Kernel
大约 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 6da5238f 编写于 作者: M Mike Rapoport 提交者： Russell King
浏览文件
操作

ARM: 8993/1: remove it8152 PCI controller driver 

The it8152 PCI host controller was only used by cm-x2xx platforms.
Since these platforms were removed, there is no point to keep it8152
driver.
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMike Rapoport <rppt@linux.ibm.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
上级 b4d5ec9b
隐藏空白更改
内联 并排
Showing with 0 addition and 492 deletion
arch/arm/Kconfig
浏览文件 @ 6da5238f
...@@ -1148,12 +1148,6 @@ config PCI_NANOENGINE ...@@ -1148,12 +1148,6 @@ config PCI_NANOENGINE
help help
Enable PCI on the BSE nanoEngine board. Enable PCI on the BSE nanoEngine board.
config PCI_HOST_ITE8152
bool
depends on PCI && MACH_ARMCORE
default y
select DMABOUNCE
config ARM_ERRATA_814220 config ARM_ERRATA_814220
bool "ARM errata: Cache maintenance by set/way operations can execute out of order" bool "ARM errata: Cache maintenance by set/way operations can execute out of order"
depends on CPU_V7 depends on CPU_V7
......
arch/arm/common/Makefile
浏览文件 @ 6da5238f
...@@ -12,7 +12,6 @@ obj-$(CONFIG_SHARP_LOCOMO) += locomo.o ...@@ -12,7 +12,6 @@ obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o
obj-$(CONFIG_CPU_V7) += secure_cntvoff.o obj-$(CONFIG_CPU_V7) += secure_cntvoff.o
obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o
obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
CFLAGS_REMOVE_mcpm_entry.o = -pg CFLAGS_REMOVE_mcpm_entry.o = -pg
AFLAGS_mcpm_head.o := -march=armv7-a AFLAGS_mcpm_head.o := -march=armv7-a
......
arch/arm/common/it8152.c 已删除 100644 → 0
浏览文件 @ b4d5ec9b
// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/common/it8152.c
*
* Copyright Compulab Ltd, 2002-2007
* Mike Rapoport <mike@compulab.co.il>
*
* The DMA bouncing part is taken from arch/arm/mach-ixp4xx/common-pci.c
* (see this file for respective copyrights)
*
* Thanks to Guennadi Liakhovetski <gl@dsa-ac.de> for IRQ enumberation
* and demux code.
*/
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/ptrace.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/export.h>
#include <asm/mach/pci.h>
#include <asm/hardware/it8152.h>
#define MAX_SLOTS 21
static void it8152_mask_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
if (irq >= IT8152_LD_IRQ(0)) {
__raw_writel((__raw_readl(IT8152_INTC_LDCNIMR) |
(1 << (irq - IT8152_LD_IRQ(0)))),
IT8152_INTC_LDCNIMR);
} else if (irq >= IT8152_LP_IRQ(0)) {
__raw_writel((__raw_readl(IT8152_INTC_LPCNIMR) |
(1 << (irq - IT8152_LP_IRQ(0)))),
IT8152_INTC_LPCNIMR);
} else if (irq >= IT8152_PD_IRQ(0)) {
__raw_writel((__raw_readl(IT8152_INTC_PDCNIMR) |
(1 << (irq - IT8152_PD_IRQ(0)))),
IT8152_INTC_PDCNIMR);
}
}
static void it8152_unmask_irq(struct irq_data *d)
{
unsigned int irq = d->irq;
if (irq >= IT8152_LD_IRQ(0)) {
__raw_writel((__raw_readl(IT8152_INTC_LDCNIMR) &
~(1 << (irq - IT8152_LD_IRQ(0)))),
IT8152_INTC_LDCNIMR);
} else if (irq >= IT8152_LP_IRQ(0)) {
__raw_writel((__raw_readl(IT8152_INTC_LPCNIMR) &
~(1 << (irq - IT8152_LP_IRQ(0)))),
IT8152_INTC_LPCNIMR);
} else if (irq >= IT8152_PD_IRQ(0)) {
__raw_writel((__raw_readl(IT8152_INTC_PDCNIMR) &
~(1 << (irq - IT8152_PD_IRQ(0)))),
IT8152_INTC_PDCNIMR);
}
}
static struct irq_chip it8152_irq_chip = {
.name = "it8152",
.irq_ack = it8152_mask_irq,
.irq_mask = it8152_mask_irq,
.irq_unmask = it8152_unmask_irq,
};
void it8152_init_irq(void)
{
int irq;
__raw_writel((0xffff), IT8152_INTC_PDCNIMR);
__raw_writel((0), IT8152_INTC_PDCNIRR);
__raw_writel((0xffff), IT8152_INTC_LPCNIMR);
__raw_writel((0), IT8152_INTC_LPCNIRR);
__raw_writel((0xffff), IT8152_INTC_LDCNIMR);
__raw_writel((0), IT8152_INTC_LDCNIRR);
for (irq = IT8152_IRQ(0); irq <= IT8152_LAST_IRQ; irq++) {
irq_set_chip_and_handler(irq, &it8152_irq_chip,
handle_level_irq);
irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
}
}
void it8152_irq_demux(struct irq_desc *desc)
{
int bits_pd, bits_lp, bits_ld;
int i;
while (1) {
/* Read all */
bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
bits_lp = __raw_readl(IT8152_INTC_LPCNIRR);
bits_ld = __raw_readl(IT8152_INTC_LDCNIRR);
/* Ack */
__raw_writel((~bits_pd), IT8152_INTC_PDCNIRR);
__raw_writel((~bits_lp), IT8152_INTC_LPCNIRR);
__raw_writel((~bits_ld), IT8152_INTC_LDCNIRR);
if (!(bits_ld | bits_lp | bits_pd)) {
/* Re-read to guarantee, that there was a moment of
time, when they all three were 0. */
bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
bits_lp = __raw_readl(IT8152_INTC_LPCNIRR);
bits_ld = __raw_readl(IT8152_INTC_LDCNIRR);
if (!(bits_ld | bits_lp | bits_pd))
return;
}
bits_pd &= ((1 << IT8152_PD_IRQ_COUNT) - 1);
while (bits_pd) {
i = __ffs(bits_pd);
generic_handle_irq(IT8152_PD_IRQ(i));
bits_pd &= ~(1 << i);
}
bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1);
while (bits_lp) {
i = __ffs(bits_lp);
generic_handle_irq(IT8152_LP_IRQ(i));
bits_lp &= ~(1 << i);
}
bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1);
while (bits_ld) {
i = __ffs(bits_ld);
generic_handle_irq(IT8152_LD_IRQ(i));
bits_ld &= ~(1 << i);
}
}
}
/* mapping for on-chip devices */
int __init it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
if ((dev->vendor == PCI_VENDOR_ID_ITE) &&
(dev->device == PCI_DEVICE_ID_ITE_8152)) {
if ((dev->class >> 8) == PCI_CLASS_MULTIMEDIA_AUDIO)
return IT8152_AUDIO_INT;
if ((dev->class >> 8) == PCI_CLASS_SERIAL_USB)
return IT8152_USB_INT;
if ((dev->class >> 8) == PCI_CLASS_SYSTEM_DMA)
return IT8152_CDMA_INT;
}
return 0;
}
static unsigned long it8152_pci_dev_base_address(struct pci_bus *bus,
unsigned int devfn)
{
unsigned long addr = 0;
if (bus->number == 0) {
if (devfn < PCI_DEVFN(MAX_SLOTS, 0))
addr = (devfn << 8);
} else
addr = (bus->number << 16) | (devfn << 8);
return addr;
}
static int it8152_pci_read_config(struct pci_bus *bus,
unsigned int devfn, int where,
int size, u32 *value)
{
unsigned long addr = it8152_pci_dev_base_address(bus, devfn);
u32 v;
int shift;
shift = (where & 3);
__raw_writel((addr + where), IT8152_PCI_CFG_ADDR);
v = (__raw_readl(IT8152_PCI_CFG_DATA) >> (8 * (shift)));
*value = v;
return PCIBIOS_SUCCESSFUL;
}
static int it8152_pci_write_config(struct pci_bus *bus,
unsigned int devfn, int where,
int size, u32 value)
{
unsigned long addr = it8152_pci_dev_base_address(bus, devfn);
u32 v, vtemp, mask = 0;
int shift;
if (size == 1)
mask = 0xff;
if (size == 2)
mask = 0xffff;
shift = (where & 3);
__raw_writel((addr + where), IT8152_PCI_CFG_ADDR);
vtemp = __raw_readl(IT8152_PCI_CFG_DATA);
if (mask)
vtemp &= ~(mask << (8 * shift));
else
vtemp = 0;
v = (value << (8 * shift));
__raw_writel((addr + where), IT8152_PCI_CFG_ADDR);
__raw_writel((v | vtemp), IT8152_PCI_CFG_DATA);
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops it8152_ops = {
.read = it8152_pci_read_config,
.write = it8152_pci_write_config,
};
static struct resource it8152_io = {
.name = "IT8152 PCI I/O region",
.flags = IORESOURCE_IO,
};
static struct resource it8152_mem = {
.name = "IT8152 PCI memory region",
.start = 0x10000000,
.end = 0x13e00000,
.flags = IORESOURCE_MEM,
};
/*
* The following functions are needed for DMA bouncing.
* ITE8152 chip can address up to 64MByte, so all the devices
* connected to ITE8152 (PCI and USB) should have limited DMA window
*/
static int it8152_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
{
dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
__func__, dma_addr, size);
return (dma_addr + size - PHYS_OFFSET) >= SZ_64M;
}
/*
* Setup DMA mask to 64MB on devices connected to ITE8152. Ignore all
* other devices.
*/
static int it8152_pci_platform_notify(struct device *dev)
{
if (dev_is_pci(dev)) {
if (dev->dma_mask)
*dev->dma_mask = (SZ_64M - 1) | PHYS_OFFSET;
dev->coherent_dma_mask = (SZ_64M - 1) | PHYS_OFFSET;
dmabounce_register_dev(dev, 2048, 4096, it8152_needs_bounce);
}
return 0;
}
static int it8152_pci_platform_notify_remove(struct device *dev)
{
if (dev_is_pci(dev))
dmabounce_unregister_dev(dev);
return 0;
}
int dma_set_coherent_mask(struct device *dev, u64 mask)
{
if (mask >= PHYS_OFFSET + SZ_64M - 1)
return 0;
return -EIO;
}
int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
{
/*
* FIXME: use pci_ioremap_io to remap the IO space here and
* move over to the generic io.h implementation.
* This requires solving the same problem for PXA PCMCIA
* support.
*/
it8152_io.start = (unsigned long)IT8152_IO_BASE + 0x12000;
it8152_io.end = (unsigned long)IT8152_IO_BASE + 0x12000 + 0x100000;
sys->mem_offset = 0x10000000;
sys->io_offset = (unsigned long)IT8152_IO_BASE;
if (request_resource(&ioport_resource, &it8152_io)) {
printk(KERN_ERR "PCI: unable to allocate IO region\n");
goto err0;
}
if (request_resource(&iomem_resource, &it8152_mem)) {
printk(KERN_ERR "PCI: unable to allocate memory region\n");
goto err1;
}
pci_add_resource_offset(&sys->resources, &it8152_io, sys->io_offset);
pci_add_resource_offset(&sys->resources, &it8152_mem, sys->mem_offset);
if (platform_notify || platform_notify_remove) {
printk(KERN_ERR "PCI: Can't use platform_notify\n");
goto err2;
}
platform_notify = it8152_pci_platform_notify;
platform_notify_remove = it8152_pci_platform_notify_remove;
return 1;
err2:
release_resource(&it8152_io);
err1:
release_resource(&it8152_mem);
err0:
return -EBUSY;
}
/* ITE bridge requires setting latency timer to avoid early bus access
termination by PCI bus master devices
*/
void pcibios_set_master(struct pci_dev *dev)
{
u8 lat;
/* no need to update on-chip OHCI controller */
if ((dev->vendor == PCI_VENDOR_ID_ITE) &&
(dev->device == PCI_DEVICE_ID_ITE_8152) &&
((dev->class >> 8) == PCI_CLASS_SERIAL_USB))
return;
pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
if (lat < 16)
lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
else if (lat > pcibios_max_latency)
lat = pcibios_max_latency;
else
return;
printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
pci_name(dev), lat);
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}
EXPORT_SYMBOL(dma_set_coherent_mask);
arch/arm/include/asm/hardware/it8152.h 已删除 100644 → 0
浏览文件 @ b4d5ec9b
/* SPDX-License-Identifier: GPL-2.0 */
/*
* linux/include/arm/hardware/it8152.h
*
* Copyright Compulab Ltd., 2006,2007
* Mike Rapoport <mike@compulab.co.il>
*
* ITE 8152 companion chip register definitions
*/
#ifndef __ASM_HARDWARE_IT8152_H
#define __ASM_HARDWARE_IT8152_H
#include <mach/irqs.h>
extern void __iomem *it8152_base_address;
#define IT8152_IO_BASE (it8152_base_address + 0x03e00000)
#define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000)
#define __REG_IT8152(x) (it8152_base_address + (x))
#define IT8152_PCI_CFG_ADDR __REG_IT8152(0x3f00800)
#define IT8152_PCI_CFG_DATA __REG_IT8152(0x3f00804)
#define IT8152_INTC_LDCNIRR __REG_IT8152(0x3f00300)
#define IT8152_INTC_LDPNIRR __REG_IT8152(0x3f00304)
#define IT8152_INTC_LDCNIMR __REG_IT8152(0x3f00308)
#define IT8152_INTC_LDPNIMR __REG_IT8152(0x3f0030C)
#define IT8152_INTC_LDNITR __REG_IT8152(0x3f00310)
#define IT8152_INTC_LDNIAR __REG_IT8152(0x3f00314)
#define IT8152_INTC_LPCNIRR __REG_IT8152(0x3f00320)
#define IT8152_INTC_LPPNIRR __REG_IT8152(0x3f00324)
#define IT8152_INTC_LPCNIMR __REG_IT8152(0x3f00328)
#define IT8152_INTC_LPPNIMR __REG_IT8152(0x3f0032C)
#define IT8152_INTC_LPNITR __REG_IT8152(0x3f00330)
#define IT8152_INTC_LPNIAR __REG_IT8152(0x3f00334)
#define IT8152_INTC_PDCNIRR __REG_IT8152(0x3f00340)
#define IT8152_INTC_PDPNIRR __REG_IT8152(0x3f00344)
#define IT8152_INTC_PDCNIMR __REG_IT8152(0x3f00348)
#define IT8152_INTC_PDPNIMR __REG_IT8152(0x3f0034C)
#define IT8152_INTC_PDNITR __REG_IT8152(0x3f00350)
#define IT8152_INTC_PDNIAR __REG_IT8152(0x3f00354)
#define IT8152_INTC_INTC_TYPER __REG_IT8152(0x3f003FC)
#define IT8152_GPIO_GPDR __REG_IT8152(0x3f00500)
/*
Interrupt controller per register summary:
---------------------------------------
LCDNIRR:
IT8152_LD_IRQ(8) PCICLK stop
IT8152_LD_IRQ(7) MCLK ready
IT8152_LD_IRQ(6) s/w
IT8152_LD_IRQ(5) UART
IT8152_LD_IRQ(4) GPIO
IT8152_LD_IRQ(3) TIMER 4
IT8152_LD_IRQ(2) TIMER 3
IT8152_LD_IRQ(1) TIMER 2
IT8152_LD_IRQ(0) TIMER 1
LPCNIRR:
IT8152_LP_IRQ(x) serial IRQ x
PCIDNIRR:
IT8152_PD_IRQ(14) PCISERR
IT8152_PD_IRQ(13) CPU/PCI bridge target abort (h2pTADR)
IT8152_PD_IRQ(12) CPU/PCI bridge master abort (h2pMADR)
IT8152_PD_IRQ(11) PCI INTD
IT8152_PD_IRQ(10) PCI INTC
IT8152_PD_IRQ(9) PCI INTB
IT8152_PD_IRQ(8) PCI INTA
IT8152_PD_IRQ(7) serial INTD
IT8152_PD_IRQ(6) serial INTC
IT8152_PD_IRQ(5) serial INTB
IT8152_PD_IRQ(4) serial INTA
IT8152_PD_IRQ(3) serial IRQ IOCHK (IOCHKR)
IT8152_PD_IRQ(2) chaining DMA (CDMAR)
IT8152_PD_IRQ(1) USB (USBR)
IT8152_PD_IRQ(0) Audio controller (ACR)
*/
#define IT8152_IRQ(x) (IRQ_BOARD_START + (x))
#define IT8152_LAST_IRQ (IRQ_BOARD_START + 40)
/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
#define IT8152_LD_IRQ_COUNT 9
#define IT8152_LP_IRQ_COUNT 16
#define IT8152_PD_IRQ_COUNT 15
/* Priorities: */
#define IT8152_PD_IRQ(i) IT8152_IRQ(i)
#define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
#define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
/* frequently used interrupts */
#define IT8152_PCISERR IT8152_PD_IRQ(14)
#define IT8152_H2PTADR IT8152_PD_IRQ(13)
#define IT8152_H2PMAR IT8152_PD_IRQ(12)
#define IT8152_PCI_INTD IT8152_PD_IRQ(11)
#define IT8152_PCI_INTC IT8152_PD_IRQ(10)
#define IT8152_PCI_INTB IT8152_PD_IRQ(9)
#define IT8152_PCI_INTA IT8152_PD_IRQ(8)
#define IT8152_CDMA_INT IT8152_PD_IRQ(2)
#define IT8152_USB_INT IT8152_PD_IRQ(1)
#define IT8152_AUDIO_INT IT8152_PD_IRQ(0)
struct pci_dev;
struct pci_sys_data;
extern void it8152_irq_demux(struct irq_desc *desc);
extern void it8152_init_irq(void);
extern int it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
extern int it8152_pci_setup(int nr, struct pci_sys_data *sys);
extern struct pci_ops it8152_ops;
#endif /* __ASM_HARDWARE_IT8152_H */
arch/arm/kernel/bios32.c
浏览文件 @ 6da5238f
...@@ -252,23 +252,6 @@ static void pci_fixup_cy82c693(struct pci_dev *dev) ...@@ -252,23 +252,6 @@ static void pci_fixup_cy82c693(struct pci_dev *dev)
} }
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693);
static void pci_fixup_it8152(struct pci_dev *dev)
{
int i;
/* fixup for ITE 8152 devices */
/* FIXME: add defines for class 0x68000 and 0x80103 */
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST ||
dev->class == 0x68000 ||
dev->class == 0x80103) {
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
dev->resource[i].start = 0;
dev->resource[i].end = 0;
dev->resource[i].flags = 0;
}
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8152, pci_fixup_it8152);
/* /*
* If the bus contains any of these devices, then we must not turn on * If the bus contains any of these devices, then we must not turn on
* parity checking of any kind. Currently this is CyberPro 20x0 only. * parity checking of any kind. Currently this is CyberPro 20x0 only.
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或