Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 6cab4860 编写于 作者: D Dmitry Baryshkov 提交者： Russell King
浏览文件
操作

[ARM] 5179/1: Replace obsolete IRQT_* and __IRQT_* values with IRQ_TYPE_* 

IRQT_* and __IRQT_* were obsoleted long ago by patch [3692/1].
Remove them completely. Sed script for the reference:

s/__IRQT_RISEDGE/IRQ_TYPE_EDGE_RISING/g
s/__IRQT_FALEDGE/IRQ_TYPE_EDGE_FALLING/g
s/__IRQT_LOWLVL/IRQ_TYPE_LEVEL_LOW/g
s/__IRQT_HIGHLVL/IRQ_TYPE_LEVEL_HIGH/g
s/IRQT_RISING/IRQ_TYPE_EDGE_RISING/g
s/IRQT_FALLING/IRQ_TYPE_EDGE_FALLING/g
s/IRQT_BOTHEDGE/IRQ_TYPE_EDGE_BOTH/g
s/IRQT_LOW/IRQ_TYPE_LEVEL_LOW/g
s/IRQT_HIGH/IRQ_TYPE_LEVEL_HIGH/g
s/IRQT_PROBE/IRQ_TYPE_PROBE/g
s/IRQT_NOEDGE/IRQ_TYPE_NONE/g
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 d9ecdb28
显示空白变更内容
内联 并排
Showing with 227 addition and 250 deletion
Documentation/arm/Interrupts
浏览文件 @ 6cab4860
...@@ -138,14 +138,8 @@ So, what's changed? ...@@ -138,14 +138,8 @@ So, what's changed?
Set active the IRQ edge(s)/level. This replaces the Set active the IRQ edge(s)/level. This replaces the
SA1111 INTPOL manipulation, and the set_GPIO_IRQ_edge() SA1111 INTPOL manipulation, and the set_GPIO_IRQ_edge()
function. Type should be one of the following: function. Type should be one of IRQ_TYPE_xxx defined in
<linux/irq.h>
#define IRQT_NOEDGE (0)
#define IRQT_RISING (__IRQT_RISEDGE)
#define IRQT_FALLING (__IRQT_FALEDGE)
#define IRQT_BOTHEDGE (__IRQT_RISEDGE|__IRQT_FALEDGE)
#define IRQT_LOW (__IRQT_LOWLVL)
#define IRQT_HIGH (__IRQT_HIGHLVL)
3. set_GPIO_IRQ_edge() is obsolete, and should be replaced by set_irq_type. 3. set_GPIO_IRQ_edge() is obsolete, and should be replaced by set_irq_type.
......
arch/arm/common/locomo.c
浏览文件 @ 6cab4860
...@@ -331,17 +331,17 @@ static int locomo_gpio_type(unsigned int irq, unsigned int type) ...@@ -331,17 +331,17 @@ static int locomo_gpio_type(unsigned int irq, unsigned int type)
mask = 1 << (irq - LOCOMO_IRQ_GPIO_START); mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
if (type == IRQT_PROBE) { if (type == IRQ_TYPE_PROBE) {
if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
return 0; return 0;
type = __IRQT_RISEDGE | __IRQT_FALEDGE; type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
} }
if (type & __IRQT_RISEDGE) if (type & IRQ_TYPE_EDGE_RISING)
GPIO_IRQ_rising_edge |= mask; GPIO_IRQ_rising_edge |= mask;
else else
GPIO_IRQ_rising_edge &= ~mask; GPIO_IRQ_rising_edge &= ~mask;
if (type & __IRQT_FALEDGE) if (type & IRQ_TYPE_EDGE_FALLING)
GPIO_IRQ_falling_edge |= mask; GPIO_IRQ_falling_edge |= mask;
else else
GPIO_IRQ_falling_edge &= ~mask; GPIO_IRQ_falling_edge &= ~mask;
...@@ -473,7 +473,7 @@ static void locomo_setup_irq(struct locomo *lchip) ...@@ -473,7 +473,7 @@ static void locomo_setup_irq(struct locomo *lchip)
/* /*
* Install handler for IRQ_LOCOMO_HW. * Install handler for IRQ_LOCOMO_HW.
*/ */
set_irq_type(lchip->irq, IRQT_FALLING); set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
set_irq_chip_data(lchip->irq, irqbase); set_irq_chip_data(lchip->irq, irqbase);
set_irq_chained_handler(lchip->irq, locomo_handler); set_irq_chained_handler(lchip->irq, locomo_handler);
......
arch/arm/common/sa1111.c
浏览文件 @ 6cab4860
...@@ -241,14 +241,14 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags) ...@@ -241,14 +241,14 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
void __iomem *mapbase = get_irq_chip_data(irq); void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long ip0; unsigned long ip0;
if (flags == IRQT_PROBE) if (flags == IRQ_TYPE_PROBE)
return 0; return 0;
if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0) if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
return -EINVAL; return -EINVAL;
ip0 = sa1111_readl(mapbase + SA1111_INTPOL0); ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
if (flags & __IRQT_RISEDGE) if (flags & IRQ_TYPE_EDGE_RISING)
ip0 &= ~mask; ip0 &= ~mask;
else else
ip0 |= mask; ip0 |= mask;
...@@ -338,14 +338,14 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags) ...@@ -338,14 +338,14 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
void __iomem *mapbase = get_irq_chip_data(irq); void __iomem *mapbase = get_irq_chip_data(irq);
unsigned long ip1; unsigned long ip1;
if (flags == IRQT_PROBE) if (flags == IRQ_TYPE_PROBE)
return 0; return 0;
if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0) if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
return -EINVAL; return -EINVAL;
ip1 = sa1111_readl(mapbase + SA1111_INTPOL1); ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
if (flags & __IRQT_RISEDGE) if (flags & IRQ_TYPE_EDGE_RISING)
ip1 &= ~mask; ip1 &= ~mask;
else else
ip1 |= mask; ip1 |= mask;
...@@ -427,7 +427,7 @@ static void sa1111_setup_irq(struct sa1111 *sachip) ...@@ -427,7 +427,7 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
/* /*
* Register SA1111 interrupt * Register SA1111 interrupt
*/ */
set_irq_type(sachip->irq, IRQT_RISING); set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
set_irq_data(sachip->irq, irqbase); set_irq_data(sachip->irq, irqbase);
set_irq_chained_handler(sachip->irq, sa1111_irq_handler); set_irq_chained_handler(sachip->irq, sa1111_irq_handler);
} }
......
arch/arm/mach-at91/board-cap9adk.c
浏览文件 @ 6cab4860
...@@ -330,10 +330,10 @@ static void __init cap9adk_board_init(void) ...@@ -330,10 +330,10 @@ static void __init cap9adk_board_init(void)
/* Serial */ /* Serial */
at91_add_device_serial(); at91_add_device_serial();
/* USB Host */ /* USB Host */
set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH); set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
at91_add_device_usbh(&cap9adk_usbh_data); at91_add_device_usbh(&cap9adk_usbh_data);
/* USB HS */ /* USB HS */
set_irq_type(AT91CAP9_ID_UDPHS, IRQT_HIGH); set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
at91_add_device_usba(&cap9adk_usba_udc_data); at91_add_device_usba(&cap9adk_usba_udc_data);
/* SPI */ /* SPI */
at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices)); at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
...@@ -350,7 +350,7 @@ static void __init cap9adk_board_init(void) ...@@ -350,7 +350,7 @@ static void __init cap9adk_board_init(void)
/* I2C */ /* I2C */
at91_add_device_i2c(NULL, 0); at91_add_device_i2c(NULL, 0);
/* LCD Controller */ /* LCD Controller */
set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH); set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
at91_add_device_lcdc(&cap9adk_lcdc_data); at91_add_device_lcdc(&cap9adk_lcdc_data);
/* AC97 */ /* AC97 */
at91_add_device_ac97(&cap9adk_ac97_data); at91_add_device_ac97(&cap9adk_ac97_data);
......
arch/arm/mach-at91/irq.c
浏览文件 @ 6cab4860
...@@ -56,19 +56,19 @@ static int at91_aic_set_type(unsigned irq, unsigned type) ...@@ -56,19 +56,19 @@ static int at91_aic_set_type(unsigned irq, unsigned type)
unsigned int smr, srctype; unsigned int smr, srctype;
switch (type) { switch (type) {
case IRQT_HIGH: case IRQ_TYPE_LEVEL_HIGH:
srctype = AT91_AIC_SRCTYPE_HIGH; srctype = AT91_AIC_SRCTYPE_HIGH;
break; break;
case IRQT_RISING: case IRQ_TYPE_EDGE_RISING:
srctype = AT91_AIC_SRCTYPE_RISING; srctype = AT91_AIC_SRCTYPE_RISING;
break; break;
case IRQT_LOW: case IRQ_TYPE_LEVEL_LOW:
if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */ if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */
srctype = AT91_AIC_SRCTYPE_LOW; srctype = AT91_AIC_SRCTYPE_LOW;
else else
return -EINVAL; return -EINVAL;
break; break;
case IRQT_FALLING: case IRQ_TYPE_EDGE_FALLING:
if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */ if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */
srctype = AT91_AIC_SRCTYPE_FALLING; srctype = AT91_AIC_SRCTYPE_FALLING;
else else
......
arch/arm/mach-ep93xx/core.c
浏览文件 @ 6cab4860
...@@ -226,7 +226,7 @@ static void ep93xx_gpio_irq_ack(unsigned int irq) ...@@ -226,7 +226,7 @@ static void ep93xx_gpio_irq_ack(unsigned int irq)
int port = line >> 3; int port = line >> 3;
int port_mask = 1 << (line & 7); int port_mask = 1 << (line & 7);
if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
gpio_int_type2[port] ^= port_mask; /* switch edge direction */ gpio_int_type2[port] ^= port_mask; /* switch edge direction */
ep93xx_gpio_update_int_params(port); ep93xx_gpio_update_int_params(port);
} }
...@@ -240,7 +240,7 @@ static void ep93xx_gpio_irq_mask_ack(unsigned int irq) ...@@ -240,7 +240,7 @@ static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
int port = line >> 3; int port = line >> 3;
int port_mask = 1 << (line & 7); int port_mask = 1 << (line & 7);
if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
gpio_int_type2[port] ^= port_mask; /* switch edge direction */ gpio_int_type2[port] ^= port_mask; /* switch edge direction */
gpio_int_unmasked[port] &= ~port_mask; gpio_int_unmasked[port] &= ~port_mask;
...@@ -283,27 +283,27 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) ...@@ -283,27 +283,27 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
gpio_direction_input(gpio); gpio_direction_input(gpio);
switch (type) { switch (type) {
case IRQT_RISING: case IRQ_TYPE_EDGE_RISING:
gpio_int_type1[port] |= port_mask; gpio_int_type1[port] |= port_mask;
gpio_int_type2[port] |= port_mask; gpio_int_type2[port] |= port_mask;
desc->handle_irq = handle_edge_irq; desc->handle_irq = handle_edge_irq;
break; break;
case IRQT_FALLING: case IRQ_TYPE_EDGE_FALLING:
gpio_int_type1[port] |= port_mask; gpio_int_type1[port] |= port_mask;
gpio_int_type2[port] &= ~port_mask; gpio_int_type2[port] &= ~port_mask;
desc->handle_irq = handle_edge_irq; desc->handle_irq = handle_edge_irq;
break; break;
case IRQT_HIGH: case IRQ_TYPE_LEVEL_HIGH:
gpio_int_type1[port] &= ~port_mask; gpio_int_type1[port] &= ~port_mask;
gpio_int_type2[port] |= port_mask; gpio_int_type2[port] |= port_mask;
desc->handle_irq = handle_level_irq; desc->handle_irq = handle_level_irq;
break; break;
case IRQT_LOW: case IRQ_TYPE_LEVEL_LOW:
gpio_int_type1[port] &= ~port_mask; gpio_int_type1[port] &= ~port_mask;
gpio_int_type2[port] &= ~port_mask; gpio_int_type2[port] &= ~port_mask;
desc->handle_irq = handle_level_irq; desc->handle_irq = handle_level_irq;
break; break;
case IRQT_BOTHEDGE: case IRQ_TYPE_EDGE_BOTH:
gpio_int_type1[port] |= port_mask; gpio_int_type1[port] |= port_mask;
/* set initial polarity based on current input level */ /* set initial polarity based on current input level */
if (gpio_get_value(gpio)) if (gpio_get_value(gpio))
......
arch/arm/mach-imx/irq.c
浏览文件 @ 6cab4860
...@@ -111,7 +111,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type) ...@@ -111,7 +111,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
reg = irq >> 5; reg = irq >> 5;
bit = 1 << (irq % 32); bit = 1 << (irq % 32);
if (type == IRQT_PROBE) { if (type == IRQ_TYPE_PROBE) {
/* Don't mess with enabled GPIOs using preconfigured edges or /* Don't mess with enabled GPIOs using preconfigured edges or
GPIOs set to alternate function during probe */ GPIOs set to alternate function during probe */
/* TODO: support probe */ /* TODO: support probe */
...@@ -120,7 +120,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type) ...@@ -120,7 +120,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
// return 0; // return 0;
// if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2))) // if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
// return 0; // return 0;
// type = __IRQT_RISEDGE | __IRQT_FALEDGE; // type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
} }
GIUS(reg) |= bit; GIUS(reg) |= bit;
...@@ -128,19 +128,19 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type) ...@@ -128,19 +128,19 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
DEBUG_IRQ("setting type of irq %d to ", _irq); DEBUG_IRQ("setting type of irq %d to ", _irq);
if (type & __IRQT_RISEDGE) { if (type & IRQ_TYPE_EDGE_RISING) {
DEBUG_IRQ("rising edges\n"); DEBUG_IRQ("rising edges\n");
irq_type = 0x0; irq_type = 0x0;
} }
if (type & __IRQT_FALEDGE) { if (type & IRQ_TYPE_EDGE_FALLING) {
DEBUG_IRQ("falling edges\n"); DEBUG_IRQ("falling edges\n");
irq_type = 0x1; irq_type = 0x1;
} }
if (type & __IRQT_LOWLVL) { if (type & IRQ_TYPE_LEVEL_LOW) {
DEBUG_IRQ("low level\n"); DEBUG_IRQ("low level\n");
irq_type = 0x3; irq_type = 0x3;
} }
if (type & __IRQT_HIGHLVL) { if (type & IRQ_TYPE_LEVEL_HIGH) {
DEBUG_IRQ("high level\n"); DEBUG_IRQ("high level\n");
irq_type = 0x2; irq_type = 0x2;
} }
......
arch/arm/mach-ixp2000/core.c
浏览文件 @ 6cab4860
...@@ -329,19 +329,19 @@ static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type) ...@@ -329,19 +329,19 @@ static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type)
/* /*
* Then, set the proper trigger type. * Then, set the proper trigger type.
*/ */
if (type & IRQT_FALLING) if (type & IRQ_TYPE_EDGE_FALLING)
GPIO_IRQ_falling_edge |= 1 << line; GPIO_IRQ_falling_edge |= 1 << line;
else else
GPIO_IRQ_falling_edge &= ~(1 << line); GPIO_IRQ_falling_edge &= ~(1 << line);
if (type & IRQT_RISING) if (type & IRQ_TYPE_EDGE_RISING)
GPIO_IRQ_rising_edge |= 1 << line; GPIO_IRQ_rising_edge |= 1 << line;
else else
GPIO_IRQ_rising_edge &= ~(1 << line); GPIO_IRQ_rising_edge &= ~(1 << line);
if (type & IRQT_LOW) if (type & IRQ_TYPE_LEVEL_LOW)
GPIO_IRQ_level_low |= 1 << line; GPIO_IRQ_level_low |= 1 << line;
else else
GPIO_IRQ_level_low &= ~(1 << line); GPIO_IRQ_level_low &= ~(1 << line);
if (type & IRQT_HIGH) if (type & IRQ_TYPE_LEVEL_HIGH)
GPIO_IRQ_level_high |= 1 << line; GPIO_IRQ_level_high |= 1 << line;
else else
GPIO_IRQ_level_high &= ~(1 << line); GPIO_IRQ_level_high &= ~(1 << line);
......
arch/arm/mach-ixp23xx/core.c
浏览文件 @ 6cab4860
...@@ -126,23 +126,23 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type) ...@@ -126,23 +126,23 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
return -EINVAL; return -EINVAL;
switch (type) { switch (type) {
case IRQT_BOTHEDGE: case IRQ_TYPE_EDGE_BOTH:
int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL; int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
irq_type = IXP23XX_IRQ_EDGE; irq_type = IXP23XX_IRQ_EDGE;
break; break;
case IRQT_RISING: case IRQ_TYPE_EDGE_RISING:
int_style = IXP23XX_GPIO_STYLE_RISING_EDGE; int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
irq_type = IXP23XX_IRQ_EDGE; irq_type = IXP23XX_IRQ_EDGE;
break; break;
case IRQT_FALLING: case IRQ_TYPE_EDGE_FALLING:
int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE; int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
irq_type = IXP23XX_IRQ_EDGE; irq_type = IXP23XX_IRQ_EDGE;
break; break;
case IRQT_HIGH: case IRQ_TYPE_LEVEL_HIGH:
int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH; int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
irq_type = IXP23XX_IRQ_LEVEL; irq_type = IXP23XX_IRQ_LEVEL;
break; break;
case IRQT_LOW: case IRQ_TYPE_LEVEL_LOW:
int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW; int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
irq_type = IXP23XX_IRQ_LEVEL; irq_type = IXP23XX_IRQ_LEVEL;
break; break;
......
arch/arm/mach-ixp23xx/roadrunner.c
浏览文件 @ 6cab4860
...@@ -110,8 +110,8 @@ static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) ...@@ -110,8 +110,8 @@ static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
static void __init roadrunner_pci_preinit(void) static void __init roadrunner_pci_preinit(void)
{ {
set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW); set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW); set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
ixp23xx_pci_preinit(); ixp23xx_pci_preinit();
} }
......
arch/arm/mach-ixp4xx/avila-pci.c
浏览文件 @ 6cab4860
...@@ -30,10 +30,10 @@ ...@@ -30,10 +30,10 @@
void __init avila_pci_preinit(void) void __init avila_pci_preinit(void)
{ {
set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW); set_irq_type(IRQ_AVILA_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW); set_irq_type(IRQ_AVILA_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW); set_irq_type(IRQ_AVILA_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW); set_irq_type(IRQ_AVILA_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
ixp4xx_pci_preinit(); ixp4xx_pci_preinit();
} }
......
arch/arm/mach-ixp4xx/common.c
浏览文件 @ 6cab4860
...@@ -142,23 +142,23 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) ...@@ -142,23 +142,23 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
return -EINVAL; return -EINVAL;
switch (type){ switch (type){
case IRQT_BOTHEDGE: case IRQ_TYPE_EDGE_BOTH:
int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
irq_type = IXP4XX_IRQ_EDGE; irq_type = IXP4XX_IRQ_EDGE;
break; break;
case IRQT_RISING: case IRQ_TYPE_EDGE_RISING:
int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
irq_type = IXP4XX_IRQ_EDGE; irq_type = IXP4XX_IRQ_EDGE;
break; break;
case IRQT_FALLING: case IRQ_TYPE_EDGE_FALLING:
int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
irq_type = IXP4XX_IRQ_EDGE; irq_type = IXP4XX_IRQ_EDGE;
break; break;
case IRQT_HIGH: case IRQ_TYPE_LEVEL_HIGH:
int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
irq_type = IXP4XX_IRQ_LEVEL; irq_type = IXP4XX_IRQ_LEVEL;
break; break;
case IRQT_LOW: case IRQ_TYPE_LEVEL_LOW:
int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
irq_type = IXP4XX_IRQ_LEVEL; irq_type = IXP4XX_IRQ_LEVEL;
break; break;
......
arch/arm/mach-ixp4xx/coyote-pci.c
浏览文件 @ 6cab4860
...@@ -27,8 +27,8 @@ ...@@ -27,8 +27,8 @@
void __init coyote_pci_preinit(void) void __init coyote_pci_preinit(void)
{ {
set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW); set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW); set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQ_TYPE_LEVEL_LOW);
ixp4xx_pci_preinit(); ixp4xx_pci_preinit();
} }
......
arch/arm/mach-ixp4xx/dsmg600-pci.c
浏览文件 @ 6cab4860
...@@ -25,12 +25,12 @@ ...@@ -25,12 +25,12 @@
void __init dsmg600_pci_preinit(void) void __init dsmg600_pci_preinit(void)
{ {
set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW); set_irq_type(IRQ_DSMG600_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW); set_irq_type(IRQ_DSMG600_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW); set_irq_type(IRQ_DSMG600_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW); set_irq_type(IRQ_DSMG600_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW); set_irq_type(IRQ_DSMG600_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW); set_irq_type(IRQ_DSMG600_PCI_INTF, IRQ_TYPE_LEVEL_LOW);
ixp4xx_pci_preinit(); ixp4xx_pci_preinit();
} }
......
arch/arm/mach-ixp4xx/fsg-pci.c
浏览文件 @ 6cab4860
...@@ -25,9 +25,9 @@ ...@@ -25,9 +25,9 @@
void __init fsg_pci_preinit(void) void __init fsg_pci_preinit(void)
{ {
set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW); set_irq_type(IRQ_FSG_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW); set_irq_type(IRQ_FSG_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW); set_irq_type(IRQ_FSG_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
ixp4xx_pci_preinit(); ixp4xx_pci_preinit();
} }
......
arch/arm/mach-ixp4xx/gateway7001-pci.c
浏览文件 @ 6cab4860
...@@ -29,8 +29,8 @@ ...@@ -29,8 +29,8 @@
void __init gateway7001_pci_preinit(void) void __init gateway7001_pci_preinit(void)
{ {
set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW); set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW); set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
ixp4xx_pci_preinit(); ixp4xx_pci_preinit();
} }
......
arch/arm/mach-ixp4xx/gtwx5715-pci.c
浏览文件 @ 6cab4860
...@@ -41,10 +41,10 @@ ...@@ -41,10 +41,10 @@
*/ */
void __init gtwx5715_pci_preinit(void) void __init gtwx5715_pci_preinit(void)
{ {
set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQT_LOW); set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQT_LOW); set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQT_LOW); set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQT_LOW); set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
ixp4xx_pci_preinit(); ixp4xx_pci_preinit();
} }
......
arch/arm/mach-ixp4xx/ixdp425-pci.c
浏览文件 @ 6cab4860
...@@ -27,10 +27,10 @@ ...@@ -27,10 +27,10 @@
void __init ixdp425_pci_preinit(void) void __init ixdp425_pci_preinit(void)
{ {
set_irq_type(IRQ_IXDP425_PCI_INTA, IRQT_LOW); set_irq_type(IRQ_IXDP425_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_IXDP425_PCI_INTB, IRQT_LOW); set_irq_type(IRQ_IXDP425_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW); set_irq_type(IRQ_IXDP425_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW); set_irq_type(IRQ_IXDP425_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
ixp4xx_pci_preinit(); ixp4xx_pci_preinit();
} }
......
arch/arm/mach-ixp4xx/ixdpg425-pci.c
浏览文件 @ 6cab4860
...@@ -25,8 +25,8 @@ ...@@ -25,8 +25,8 @@
void __init ixdpg425_pci_preinit(void) void __init ixdpg425_pci_preinit(void)
{ {
set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW); set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW); set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
ixp4xx_pci_preinit(); ixp4xx_pci_preinit();
} }
......
arch/arm/mach-ixp4xx/nas100d-pci.c
浏览文件 @ 6cab4860
...@@ -24,11 +24,11 @@ ...@@ -24,11 +24,11 @@
void __init nas100d_pci_preinit(void) void __init nas100d_pci_preinit(void)
{ {
set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW); set_irq_type(IRQ_NAS100D_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW); set_irq_type(IRQ_NAS100D_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW); set_irq_type(IRQ_NAS100D_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW); set_irq_type(IRQ_NAS100D_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW); set_irq_type(IRQ_NAS100D_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
ixp4xx_pci_preinit(); ixp4xx_pci_preinit();
} }
......
arch/arm/mach-ixp4xx/nslu2-pci.c
浏览文件 @ 6cab4860
...@@ -24,9 +24,9 @@ ...@@ -24,9 +24,9 @@
void __init nslu2_pci_preinit(void) void __init nslu2_pci_preinit(void)
{ {
set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW); set_irq_type(IRQ_NSLU2_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW); set_irq_type(IRQ_NSLU2_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW); set_irq_type(IRQ_NSLU2_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
ixp4xx_pci_preinit(); ixp4xx_pci_preinit();
} }
......
arch/arm/mach-ixp4xx/wg302v2-pci.c
浏览文件 @ 6cab4860
...@@ -29,8 +29,8 @@ ...@@ -29,8 +29,8 @@
void __init wg302v2_pci_preinit(void) void __init wg302v2_pci_preinit(void)
{ {
set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW); set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW); set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
ixp4xx_pci_preinit(); ixp4xx_pci_preinit();
} }
......
arch/arm/mach-ks8695/irq.c
浏览文件 @ 6cab4860
...@@ -72,21 +72,21 @@ static int ks8695_irq_set_type(unsigned int irqno, unsigned int type) ...@@ -72,21 +72,21 @@ static int ks8695_irq_set_type(unsigned int irqno, unsigned int type)
ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC); ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
switch (type) { switch (type) {
case IRQT_HIGH: case IRQ_TYPE_LEVEL_HIGH:
mode = IOPC_TM_HIGH; mode = IOPC_TM_HIGH;
level_triggered = 1; level_triggered = 1;
break; break;
case IRQT_LOW: case IRQ_TYPE_LEVEL_LOW:
mode = IOPC_TM_LOW; mode = IOPC_TM_LOW;
level_triggered = 1; level_triggered = 1;
break; break;
case IRQT_RISING: case IRQ_TYPE_EDGE_RISING:
mode = IOPC_TM_RISING; mode = IOPC_TM_RISING;
break; break;
case IRQT_FALLING: case IRQ_TYPE_EDGE_FALLING:
mode = IOPC_TM_FALLING; mode = IOPC_TM_FALLING;
break; break;
case IRQT_BOTHEDGE: case IRQ_TYPE_EDGE_BOTH:
mode = IOPC_TM_EDGE; mode = IOPC_TM_EDGE;
break; break;
default: default:
......
arch/arm/mach-netx/generic.c
浏览文件 @ 6cab4860
...@@ -99,19 +99,19 @@ netx_hif_irq_type(unsigned int _irq, unsigned int type) ...@@ -99,19 +99,19 @@ netx_hif_irq_type(unsigned int _irq, unsigned int type)
irq = _irq - NETX_IRQ_HIF_CHAINED(0); irq = _irq - NETX_IRQ_HIF_CHAINED(0);
if (type & __IRQT_RISEDGE) { if (type & IRQ_TYPE_EDGE_RISING) {
DEBUG_IRQ("rising edges\n"); DEBUG_IRQ("rising edges\n");
val |= (1 << 26) << irq; val |= (1 << 26) << irq;
} }
if (type & __IRQT_FALEDGE) { if (type & IRQ_TYPE_EDGE_FALLING) {
DEBUG_IRQ("falling edges\n"); DEBUG_IRQ("falling edges\n");
val &= ~((1 << 26) << irq); val &= ~((1 << 26) << irq);
} }
if (type & __IRQT_LOWLVL) { if (type & IRQ_TYPE_LEVEL_LOW) {
DEBUG_IRQ("low level\n"); DEBUG_IRQ("low level\n");
val &= ~((1 << 26) << irq); val &= ~((1 << 26) << irq);
} }
if (type & __IRQT_HIGHLVL) { if (type & IRQ_TYPE_LEVEL_HIGH) {
DEBUG_IRQ("high level\n"); DEBUG_IRQ("high level\n");
val |= (1 << 26) << irq; val |= (1 << 26) << irq;
} }
......
arch/arm/mach-omap1/board-osk.c
浏览文件 @ 6cab4860
...@@ -288,7 +288,7 @@ static void __init osk_init_cf(void) ...@@ -288,7 +288,7 @@ static void __init osk_init_cf(void)
return; return;
} }
/* the CF I/O IRQ is really active-low */ /* the CF I/O IRQ is really active-low */
set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING); set_irq_type(OMAP_GPIO_IRQ(62), IRQ_TYPE_EDGE_FALLING);
} }
static void __init osk_init_irq(void) static void __init osk_init_irq(void)
...@@ -483,7 +483,7 @@ static void __init osk_mistral_init(void) ...@@ -483,7 +483,7 @@ static void __init osk_mistral_init(void)
omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */ omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */
gpio_request(4, "ts_int"); gpio_request(4, "ts_int");
gpio_direction_input(4); gpio_direction_input(4);
set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING); set_irq_type(OMAP_GPIO_IRQ(4), IRQ_TYPE_EDGE_FALLING);
spi_register_board_info(mistral_boardinfo, spi_register_board_info(mistral_boardinfo,
ARRAY_SIZE(mistral_boardinfo)); ARRAY_SIZE(mistral_boardinfo));
...@@ -494,7 +494,7 @@ static void __init osk_mistral_init(void) ...@@ -494,7 +494,7 @@ static void __init osk_mistral_init(void)
int ret = 0; int ret = 0;
gpio_direction_input(OMAP_MPUIO(2)); gpio_direction_input(OMAP_MPUIO(2));
set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING); set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQ_TYPE_EDGE_RISING);
#ifdef CONFIG_PM #ifdef CONFIG_PM
/* share the IRQ in case someone wants to use the /* share the IRQ in case someone wants to use the
* button for more than wakeup from system sleep. * button for more than wakeup from system sleep.
......
arch/arm/mach-omap1/board-palmz71.c
浏览文件 @ 6cab4860
...@@ -298,11 +298,11 @@ palmz71_powercable(int irq, void *dev_id) ...@@ -298,11 +298,11 @@ palmz71_powercable(int irq, void *dev_id)
if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) { if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) {
printk(KERN_INFO "PM: Power cable connected\n"); printk(KERN_INFO "PM: Power cable connected\n");
set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
IRQT_FALLING); IRQ_TYPE_EDGE_FALLING);
} else { } else {
printk(KERN_INFO "PM: Power cable disconnected\n"); printk(KERN_INFO "PM: Power cable disconnected\n");
set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
IRQT_RISING); IRQ_TYPE_EDGE_RISING);
} }
return IRQ_HANDLED; return IRQ_HANDLED;
} }
......
arch/arm/mach-omap1/board-voiceblue.c
浏览文件 @ 6cab4860
...@@ -186,10 +186,10 @@ static void __init voiceblue_init(void) ...@@ -186,10 +186,10 @@ static void __init voiceblue_init(void)
omap_request_gpio(13); omap_request_gpio(13);
omap_request_gpio(14); omap_request_gpio(14);
omap_request_gpio(15); omap_request_gpio(15);
set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING); set_irq_type(OMAP_GPIO_IRQ(12), IRQ_TYPE_EDGE_RISING);
set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING); set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING); set_irq_type(OMAP_GPIO_IRQ(14), IRQ_TYPE_EDGE_RISING);
set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING); set_irq_type(OMAP_GPIO_IRQ(15), IRQ_TYPE_EDGE_RISING);
platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
omap_board_config = voiceblue_config; omap_board_config = voiceblue_config;
......
arch/arm/mach-omap1/fpga.c
浏览文件 @ 6cab4860
...@@ -181,7 +181,7 @@ void omap1510_fpga_init_irq(void) ...@@ -181,7 +181,7 @@ void omap1510_fpga_init_irq(void)
*/ */
omap_request_gpio(13); omap_request_gpio(13);
omap_set_gpio_direction(13, 1); omap_set_gpio_direction(13, 1);
set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING); set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
} }
......
arch/arm/mach-omap2/board-apollon.c
浏览文件 @ 6cab4860
...@@ -337,17 +337,17 @@ static void __init apollon_sw_init(void) ...@@ -337,17 +337,17 @@ static void __init apollon_sw_init(void)
omap_request_gpio(SW_DOWN_GPIO58); omap_request_gpio(SW_DOWN_GPIO58);
omap_set_gpio_direction(SW_DOWN_GPIO58, 1); omap_set_gpio_direction(SW_DOWN_GPIO58, 1);
set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING); set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt, if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
IRQF_SHARED, "enter sw", IRQF_SHARED, "enter sw",
&apollon_sw_interrupt)) &apollon_sw_interrupt))
return; return;
set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING); set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt, if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
IRQF_SHARED, "up sw", IRQF_SHARED, "up sw",
&apollon_sw_interrupt)) &apollon_sw_interrupt))
return; return;
set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING); set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt, if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
IRQF_SHARED, "down sw", IRQF_SHARED, "down sw",
&apollon_sw_interrupt)) &apollon_sw_interrupt))
......
arch/arm/mach-orion5x/db88f5281-setup.c
浏览文件 @ 6cab4860
...@@ -213,7 +213,7 @@ void __init db88f5281_pci_preinit(void) ...@@ -213,7 +213,7 @@ void __init db88f5281_pci_preinit(void)
pin = DB88F5281_PCI_SLOT0_IRQ_PIN; pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
if (gpio_request(pin, "PCI Int1") == 0) { if (gpio_request(pin, "PCI Int1") == 0) {
if (gpio_direction_input(pin) == 0) { if (gpio_direction_input(pin) == 0) {
set_irq_type(gpio_to_irq(pin), IRQT_LOW); set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else { } else {
printk(KERN_ERR "db88f5281_pci_preinit faield to " printk(KERN_ERR "db88f5281_pci_preinit faield to "
"set_irq_type pin %d\n", pin); "set_irq_type pin %d\n", pin);
...@@ -226,7 +226,7 @@ void __init db88f5281_pci_preinit(void) ...@@ -226,7 +226,7 @@ void __init db88f5281_pci_preinit(void)
pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN; pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
if (gpio_request(pin, "PCI Int2") == 0) { if (gpio_request(pin, "PCI Int2") == 0) {
if (gpio_direction_input(pin) == 0) { if (gpio_direction_input(pin) == 0) {
set_irq_type(gpio_to_irq(pin), IRQT_LOW); set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else { } else {
printk(KERN_ERR "db88f5281_pci_preinit faield " printk(KERN_ERR "db88f5281_pci_preinit faield "
"to set_irq_type pin %d\n", pin); "to set_irq_type pin %d\n", pin);
......
arch/arm/mach-orion5x/irq.c
浏览文件 @ 6cab4860
...@@ -91,27 +91,27 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type) ...@@ -91,27 +91,27 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
desc = irq_desc + irq; desc = irq_desc + irq;
switch (type) { switch (type) {
case IRQT_HIGH: case IRQ_TYPE_LEVEL_HIGH:
desc->handle_irq = handle_level_irq; desc->handle_irq = handle_level_irq;
desc->status |= IRQ_LEVEL; desc->status |= IRQ_LEVEL;
orion5x_clrbits(GPIO_IN_POL, (1 << pin)); orion5x_clrbits(GPIO_IN_POL, (1 << pin));
break; break;
case IRQT_LOW: case IRQ_TYPE_LEVEL_LOW:
desc->handle_irq = handle_level_irq; desc->handle_irq = handle_level_irq;
desc->status |= IRQ_LEVEL; desc->status |= IRQ_LEVEL;
orion5x_setbits(GPIO_IN_POL, (1 << pin)); orion5x_setbits(GPIO_IN_POL, (1 << pin));
break; break;
case IRQT_RISING: case IRQ_TYPE_EDGE_RISING:
desc->handle_irq = handle_edge_irq; desc->handle_irq = handle_edge_irq;
desc->status &= ~IRQ_LEVEL; desc->status &= ~IRQ_LEVEL;
orion5x_clrbits(GPIO_IN_POL, (1 << pin)); orion5x_clrbits(GPIO_IN_POL, (1 << pin));
break; break;
case IRQT_FALLING: case IRQ_TYPE_EDGE_FALLING:
desc->handle_irq = handle_edge_irq; desc->handle_irq = handle_edge_irq;
desc->status &= ~IRQ_LEVEL; desc->status &= ~IRQ_LEVEL;
orion5x_setbits(GPIO_IN_POL, (1 << pin)); orion5x_setbits(GPIO_IN_POL, (1 << pin));
break; break;
case IRQT_BOTHEDGE: case IRQ_TYPE_EDGE_BOTH:
desc->handle_irq = handle_edge_irq; desc->handle_irq = handle_edge_irq;
desc->status &= ~IRQ_LEVEL; desc->status &= ~IRQ_LEVEL;
/* /*
...@@ -156,7 +156,7 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) ...@@ -156,7 +156,7 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
if (cause & (1 << pin)) { if (cause & (1 << pin)) {
irq = gpio_to_irq(pin); irq = gpio_to_irq(pin);
desc = irq_desc + irq; desc = irq_desc + irq;
if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
/* Swap polarity (race with GPIO line) */ /* Swap polarity (race with GPIO line) */
u32 polarity = readl(GPIO_IN_POL); u32 polarity = readl(GPIO_IN_POL);
polarity ^= 1 << pin; polarity ^= 1 << pin;
......
arch/arm/mach-orion5x/rd88f5182-setup.c
浏览文件 @ 6cab4860
...@@ -148,7 +148,7 @@ void __init rd88f5182_pci_preinit(void) ...@@ -148,7 +148,7 @@ void __init rd88f5182_pci_preinit(void)
pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
if (gpio_request(pin, "PCI IntA") == 0) { if (gpio_request(pin, "PCI IntA") == 0) {
if (gpio_direction_input(pin) == 0) { if (gpio_direction_input(pin) == 0) {
set_irq_type(gpio_to_irq(pin), IRQT_LOW); set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else { } else {
printk(KERN_ERR "rd88f5182_pci_preinit faield to " printk(KERN_ERR "rd88f5182_pci_preinit faield to "
"set_irq_type pin %d\n", pin); "set_irq_type pin %d\n", pin);
...@@ -161,7 +161,7 @@ void __init rd88f5182_pci_preinit(void) ...@@ -161,7 +161,7 @@ void __init rd88f5182_pci_preinit(void)
pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
if (gpio_request(pin, "PCI IntB") == 0) { if (gpio_request(pin, "PCI IntB") == 0) {
if (gpio_direction_input(pin) == 0) { if (gpio_direction_input(pin) == 0) {
set_irq_type(gpio_to_irq(pin), IRQT_LOW); set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else { } else {
printk(KERN_ERR "rd88f5182_pci_preinit faield to " printk(KERN_ERR "rd88f5182_pci_preinit faield to "
"set_irq_type pin %d\n", pin); "set_irq_type pin %d\n", pin);
......
arch/arm/mach-orion5x/ts209-setup.c
浏览文件 @ 6cab4860
...@@ -117,7 +117,7 @@ void __init qnap_ts209_pci_preinit(void) ...@@ -117,7 +117,7 @@ void __init qnap_ts209_pci_preinit(void)
pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN; pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
if (gpio_request(pin, "PCI Int1") == 0) { if (gpio_request(pin, "PCI Int1") == 0) {
if (gpio_direction_input(pin) == 0) { if (gpio_direction_input(pin) == 0) {
set_irq_type(gpio_to_irq(pin), IRQT_LOW); set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else { } else {
printk(KERN_ERR "qnap_ts209_pci_preinit failed to " printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
"set_irq_type pin %d\n", pin); "set_irq_type pin %d\n", pin);
...@@ -131,7 +131,7 @@ void __init qnap_ts209_pci_preinit(void) ...@@ -131,7 +131,7 @@ void __init qnap_ts209_pci_preinit(void)
pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN; pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
if (gpio_request(pin, "PCI Int2") == 0) { if (gpio_request(pin, "PCI Int2") == 0) {
if (gpio_direction_input(pin) == 0) { if (gpio_direction_input(pin) == 0) {
set_irq_type(gpio_to_irq(pin), IRQT_LOW); set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else { } else {
printk(KERN_ERR "qnap_ts209_pci_preinit failed " printk(KERN_ERR "qnap_ts209_pci_preinit failed "
"to set_irq_type pin %d\n", pin); "to set_irq_type pin %d\n", pin);
......
arch/arm/mach-pnx4008/irq.c
浏览文件 @ 6cab4860
...@@ -56,28 +56,28 @@ static void pnx4008_mask_ack_irq(unsigned int irq) ...@@ -56,28 +56,28 @@ static void pnx4008_mask_ack_irq(unsigned int irq)
static int pnx4008_set_irq_type(unsigned int irq, unsigned int type) static int pnx4008_set_irq_type(unsigned int irq, unsigned int type)
{ {
switch (type) { switch (type) {
case IRQT_RISING: case IRQ_TYPE_EDGE_RISING:
__raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */ __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */
__raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /*rising edge */ __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /*rising edge */
set_irq_handler(irq, handle_edge_irq); set_irq_handler(irq, handle_edge_irq);
break; break;
case IRQT_FALLING: case IRQ_TYPE_EDGE_FALLING:
__raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */ __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */
__raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*falling edge */ __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*falling edge */
set_irq_handler(irq, handle_edge_irq); set_irq_handler(irq, handle_edge_irq);
break; break;
case IRQT_LOW: case IRQ_TYPE_LEVEL_LOW:
__raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */ __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */
__raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*low level */ __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*low level */
set_irq_handler(irq, handle_level_irq); set_irq_handler(irq, handle_level_irq);
break; break;
case IRQT_HIGH: case IRQ_TYPE_LEVEL_HIGH:
__raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */ __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */
__raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /* high level */ __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /* high level */
set_irq_handler(irq, handle_level_irq); set_irq_handler(irq, handle_level_irq);
break; break;
/* IRQT_BOTHEDGE is not supported */ /* IRQ_TYPE_EDGE_BOTH is not supported */
default: default:
printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type); printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
return -1; return -1;
......
arch/arm/mach-pxa/cm-x270-pci.c
浏览文件 @ 6cab4860
...@@ -71,7 +71,7 @@ void __cmx270_pci_init_irq(int irq_gpio) ...@@ -71,7 +71,7 @@ void __cmx270_pci_init_irq(int irq_gpio)
cmx270_it8152_irq_gpio = irq_gpio; cmx270_it8152_irq_gpio = irq_gpio;
set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING); set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux); set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
} }
......
arch/arm/mach-pxa/lpd270.c
浏览文件 @ 6cab4860
...@@ -113,7 +113,7 @@ static void __init lpd270_init_irq(void) ...@@ -113,7 +113,7 @@ static void __init lpd270_init_irq(void)
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
} }
set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
set_irq_type(IRQ_GPIO(0), IRQT_FALLING); set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
} }
......
arch/arm/mach-pxa/lubbock.c
浏览文件 @ 6cab4860
...@@ -152,7 +152,7 @@ static void __init lubbock_init_irq(void) ...@@ -152,7 +152,7 @@ static void __init lubbock_init_irq(void)
} }
set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler); set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
set_irq_type(IRQ_GPIO(0), IRQT_FALLING); set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
} }
#ifdef CONFIG_PM #ifdef CONFIG_PM
......
arch/arm/mach-pxa/mainstone.c
浏览文件 @ 6cab4860
...@@ -191,7 +191,7 @@ static void __init mainstone_init_irq(void) ...@@ -191,7 +191,7 @@ static void __init mainstone_init_irq(void)
MST_INTSETCLR = 0; MST_INTSETCLR = 0;
set_irq_chained_handler(IRQ_GPIO(0), mainstone_irq_handler); set_irq_chained_handler(IRQ_GPIO(0), mainstone_irq_handler);
set_irq_type(IRQ_GPIO(0), IRQT_FALLING); set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
} }
#ifdef CONFIG_PM #ifdef CONFIG_PM
......
arch/arm/mach-pxa/sharpsl_pm.c
浏览文件 @ 6cab4860
...@@ -146,18 +146,18 @@ void sharpsl_pm_pxa_init(void) ...@@ -146,18 +146,18 @@ void sharpsl_pm_pxa_init(void)
if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) { if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin)); dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
} }
else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE); else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH);
if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) { if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock)); dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
} }
else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING); else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING);
if (sharpsl_pm.machinfo->gpio_fatal) { if (sharpsl_pm.machinfo->gpio_fatal) {
if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) { if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal)); dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
} }
else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING); else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING);
} }
if (sharpsl_pm.machinfo->batfull_irq) if (sharpsl_pm.machinfo->batfull_irq)
...@@ -166,7 +166,7 @@ void sharpsl_pm_pxa_init(void) ...@@ -166,7 +166,7 @@ void sharpsl_pm_pxa_init(void)
if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) { if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull)); dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
} }
else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING); else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING);
} }
} }
......
arch/arm/mach-pxa/trizeps4.c
浏览文件 @ 6cab4860
...@@ -122,7 +122,7 @@ static struct resource dm9000_resources[] = { ...@@ -122,7 +122,7 @@ static struct resource dm9000_resources[] = {
[2] = { [2] = {
.start = TRIZEPS4_ETH_IRQ, .start = TRIZEPS4_ETH_IRQ,
.end = TRIZEPS4_ETH_IRQ, .end = TRIZEPS4_ETH_IRQ,
.flags = (IORESOURCE_IRQ | IRQT_RISING), .flags = (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING),
}, },
}; };
......
arch/arm/mach-sa1100/cerf.c
浏览文件 @ 6cab4860
...@@ -96,7 +96,7 @@ static struct resource cerf_flash_resource = { ...@@ -96,7 +96,7 @@ static struct resource cerf_flash_resource = {
static void __init cerf_init_irq(void) static void __init cerf_init_irq(void)
{ {
sa1100_init_irq(); sa1100_init_irq();
set_irq_type(CERF_ETH_IRQ, IRQT_RISING); set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING);
} }
static struct map_desc cerf_io_desc[] __initdata = { static struct map_desc cerf_io_desc[] __initdata = {
......
arch/arm/mach-sa1100/h3600.c
浏览文件 @ 6cab4860
...@@ -834,7 +834,7 @@ static void __init h3800_init_irq(void) ...@@ -834,7 +834,7 @@ static void __init h3800_init_irq(void)
set_irq_chip(irq, &h3800_gpio_irqchip); set_irq_chip(irq, &h3800_gpio_irqchip);
} }
#endif #endif
set_irq_type(IRQ_GPIO_H3800_ASIC, IRQT_RISING); set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING);
set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux); set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux);
} }
......
arch/arm/mach-sa1100/irq.c
浏览文件 @ 6cab4860
...@@ -46,17 +46,17 @@ static int sa1100_gpio_type(unsigned int irq, unsigned int type) ...@@ -46,17 +46,17 @@ static int sa1100_gpio_type(unsigned int irq, unsigned int type)
else else
mask = GPIO11_27_MASK(irq); mask = GPIO11_27_MASK(irq);
if (type == IRQT_PROBE) { if (type == IRQ_TYPE_PROBE) {
if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
return 0; return 0;
type = __IRQT_RISEDGE | __IRQT_FALEDGE; type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
} }
if (type & __IRQT_RISEDGE) { if (type & IRQ_TYPE_EDGE_RISING) {
GPIO_IRQ_rising_edge |= mask; GPIO_IRQ_rising_edge |= mask;
} else } else
GPIO_IRQ_rising_edge &= ~mask; GPIO_IRQ_rising_edge &= ~mask;
if (type & __IRQT_FALEDGE) { if (type & IRQ_TYPE_EDGE_FALLING) {
GPIO_IRQ_falling_edge |= mask; GPIO_IRQ_falling_edge |= mask;
} else } else
GPIO_IRQ_falling_edge &= ~mask; GPIO_IRQ_falling_edge &= ~mask;
......
arch/arm/mach-sa1100/neponset.c
浏览文件 @ 6cab4860
...@@ -151,7 +151,7 @@ static int __devinit neponset_probe(struct platform_device *dev) ...@@ -151,7 +151,7 @@ static int __devinit neponset_probe(struct platform_device *dev)
/* /*
* Install handler for GPIO25. * Install handler for GPIO25.
*/ */
set_irq_type(IRQ_GPIO25, IRQT_RISING); set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING);
set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler); set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler);
/* /*
......
arch/arm/mach-sa1100/pleb.c
浏览文件 @ 6cab4860
...@@ -143,7 +143,7 @@ static void __init pleb_map_io(void) ...@@ -143,7 +143,7 @@ static void __init pleb_map_io(void)
GPDR &= ~GPIO_ETH0_IRQ; GPDR &= ~GPIO_ETH0_IRQ;
set_irq_type(GPIO_ETH0_IRQ, IRQT_FALLING); set_irq_type(GPIO_ETH0_IRQ, IRQ_TYPE_EDGE_FALLING);
} }
MACHINE_START(PLEB, "PLEB") MACHINE_START(PLEB, "PLEB")
......
arch/arm/plat-mxc/gpio.c
浏览文件 @ 6cab4860
...@@ -73,19 +73,19 @@ static int gpio_set_irq_type(u32 irq, u32 type) ...@@ -73,19 +73,19 @@ static int gpio_set_irq_type(u32 irq, u32 type)
void __iomem *reg = port->base; void __iomem *reg = port->base;
switch (type) { switch (type) {
case IRQT_RISING: case IRQ_TYPE_EDGE_RISING:
edge = GPIO_INT_RISE_EDGE; edge = GPIO_INT_RISE_EDGE;
break; break;
case IRQT_FALLING: case IRQ_TYPE_EDGE_FALLING:
edge = GPIO_INT_FALL_EDGE; edge = GPIO_INT_FALL_EDGE;
break; break;
case IRQT_LOW: case IRQ_TYPE_LEVEL_LOW:
edge = GPIO_INT_LOW_LEV; edge = GPIO_INT_LOW_LEV;
break; break;
case IRQT_HIGH: case IRQ_TYPE_LEVEL_HIGH:
edge = GPIO_INT_HIGH_LEV; edge = GPIO_INT_HIGH_LEV;
break; break;
default: /* this includes IRQT_BOTHEDGE */ default: /* this includes IRQ_TYPE_EDGE_BOTH */
return -EINVAL; return -EINVAL;
} }
......
arch/arm/plat-omap/gpio.c
浏览文件 @ 6cab4860
...@@ -517,13 +517,13 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, ...@@ -517,13 +517,13 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
u32 gpio_bit = 1 << gpio; u32 gpio_bit = 1 << gpio;
MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
trigger & __IRQT_LOWLVL); trigger & IRQ_TYPE_LEVEL_LOW);
MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
trigger & __IRQT_HIGHLVL); trigger & IRQ_TYPE_LEVEL_HIGH);
MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
trigger & __IRQT_RISEDGE); trigger & IRQ_TYPE_EDGE_RISING);
MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
trigger & __IRQT_FALEDGE); trigger & IRQ_TYPE_EDGE_FALLING);
if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
if (trigger != 0) if (trigger != 0)
...@@ -555,9 +555,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) ...@@ -555,9 +555,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
case METHOD_MPUIO: case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE; reg += OMAP_MPUIO_GPIO_INT_EDGE;
l = __raw_readl(reg); l = __raw_readl(reg);
if (trigger & __IRQT_RISEDGE) if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio; l |= 1 << gpio;
else if (trigger & __IRQT_FALEDGE) else if (trigger & IRQ_TYPE_EDGE_FALLING)
l &= ~(1 << gpio); l &= ~(1 << gpio);
else else
goto bad; goto bad;
...@@ -567,9 +567,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) ...@@ -567,9 +567,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
case METHOD_GPIO_1510: case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL; reg += OMAP1510_GPIO_INT_CONTROL;
l = __raw_readl(reg); l = __raw_readl(reg);
if (trigger & __IRQT_RISEDGE) if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio; l |= 1 << gpio;
else if (trigger & __IRQT_FALEDGE) else if (trigger & IRQ_TYPE_EDGE_FALLING)
l &= ~(1 << gpio); l &= ~(1 << gpio);
else else
goto bad; goto bad;
...@@ -584,9 +584,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) ...@@ -584,9 +584,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
gpio &= 0x07; gpio &= 0x07;
l = __raw_readl(reg); l = __raw_readl(reg);
l &= ~(3 << (gpio << 1)); l &= ~(3 << (gpio << 1));
if (trigger & __IRQT_RISEDGE) if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 2 << (gpio << 1); l |= 2 << (gpio << 1);
if (trigger & __IRQT_FALEDGE) if (trigger & IRQ_TYPE_EDGE_FALLING)
l |= 1 << (gpio << 1); l |= 1 << (gpio << 1);
if (trigger) if (trigger)
/* Enable wake-up during idle for dynamic tick */ /* Enable wake-up during idle for dynamic tick */
...@@ -599,9 +599,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) ...@@ -599,9 +599,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
case METHOD_GPIO_730: case METHOD_GPIO_730:
reg += OMAP730_GPIO_INT_CONTROL; reg += OMAP730_GPIO_INT_CONTROL;
l = __raw_readl(reg); l = __raw_readl(reg);
if (trigger & __IRQT_RISEDGE) if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio; l |= 1 << gpio;
else if (trigger & __IRQT_FALEDGE) else if (trigger & IRQ_TYPE_EDGE_FALLING)
l &= ~(1 << gpio); l &= ~(1 << gpio);
else else
goto bad; goto bad;
...@@ -887,7 +887,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio) ...@@ -887,7 +887,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio)
_set_gpio_direction(bank, get_gpio_index(gpio), 1); _set_gpio_direction(bank, get_gpio_index(gpio), 1);
_set_gpio_irqenable(bank, gpio, 0); _set_gpio_irqenable(bank, gpio, 0);
_clear_gpio_irqstatus(bank, gpio); _clear_gpio_irqstatus(bank, gpio);
_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
} }
/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
...@@ -924,7 +924,7 @@ int omap_request_gpio(int gpio) ...@@ -924,7 +924,7 @@ int omap_request_gpio(int gpio)
/* Set trigger to none. You need to enable the desired trigger with /* Set trigger to none. You need to enable the desired trigger with
* request_irq() or set_irq_type(). * request_irq() or set_irq_type().
*/ */
_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
#ifdef CONFIG_ARCH_OMAP15XX #ifdef CONFIG_ARCH_OMAP15XX
if (bank->method == METHOD_GPIO_1510) { if (bank->method == METHOD_GPIO_1510) {
......
arch/arm/plat-s3c24xx/irq.c
浏览文件 @ 6cab4860
...@@ -292,27 +292,27 @@ s3c_irqext_type(unsigned int irq, unsigned int type) ...@@ -292,27 +292,27 @@ s3c_irqext_type(unsigned int irq, unsigned int type)
/* Set the external interrupt to pointed trigger type */ /* Set the external interrupt to pointed trigger type */
switch (type) switch (type)
{ {
case IRQT_NOEDGE: case IRQ_TYPE_NONE:
printk(KERN_WARNING "No edge setting!\n"); printk(KERN_WARNING "No edge setting!\n");
break; break;
case IRQT_RISING: case IRQ_TYPE_EDGE_RISING:
newvalue = S3C2410_EXTINT_RISEEDGE; newvalue = S3C2410_EXTINT_RISEEDGE;
break; break;
case IRQT_FALLING: case IRQ_TYPE_EDGE_FALLING:
newvalue = S3C2410_EXTINT_FALLEDGE; newvalue = S3C2410_EXTINT_FALLEDGE;
break; break;
case IRQT_BOTHEDGE: case IRQ_TYPE_EDGE_BOTH:
newvalue = S3C2410_EXTINT_BOTHEDGE; newvalue = S3C2410_EXTINT_BOTHEDGE;
break; break;
case IRQT_LOW: case IRQ_TYPE_LEVEL_LOW:
newvalue = S3C2410_EXTINT_LOWLEV; newvalue = S3C2410_EXTINT_LOWLEV;
break; break;
case IRQT_HIGH: case IRQ_TYPE_LEVEL_HIGH:
newvalue = S3C2410_EXTINT_HILEV; newvalue = S3C2410_EXTINT_HILEV;
break; break;
......
drivers/ata/pata_ixp4xx_cf.c
浏览文件 @ 6cab4860
...@@ -169,7 +169,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev) ...@@ -169,7 +169,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0); irq = platform_get_irq(pdev, 0);
if (irq) if (irq)
set_irq_type(irq, IRQT_RISING); set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
/* Setup expansion bus chip selects */ /* Setup expansion bus chip selects */
*data->cs0_cfg = data->cs0_bits; *data->cs0_cfg = data->cs0_bits;
......
drivers/input/touchscreen/corgi_ts.c
浏览文件 @ 6cab4860
...@@ -195,7 +195,7 @@ static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer) ...@@ -195,7 +195,7 @@ static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer)
{ {
if ((GPLR(IRQ_TO_GPIO(corgi_ts->irq_gpio)) & GPIO_bit(IRQ_TO_GPIO(corgi_ts->irq_gpio))) == 0) { if ((GPLR(IRQ_TO_GPIO(corgi_ts->irq_gpio)) & GPIO_bit(IRQ_TO_GPIO(corgi_ts->irq_gpio))) == 0) {
/* Disable Interrupt */ /* Disable Interrupt */
set_irq_type(corgi_ts->irq_gpio, IRQT_NOEDGE); set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_NONE);
if (read_xydata(corgi_ts)) { if (read_xydata(corgi_ts)) {
corgi_ts->pendown = 1; corgi_ts->pendown = 1;
new_data(corgi_ts); new_data(corgi_ts);
...@@ -214,7 +214,7 @@ static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer) ...@@ -214,7 +214,7 @@ static void ts_interrupt_main(struct corgi_ts *corgi_ts, int isTimer)
} }
/* Enable Falling Edge */ /* Enable Falling Edge */
set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING); set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
corgi_ts->pendown = 0; corgi_ts->pendown = 0;
} }
} }
...@@ -258,7 +258,7 @@ static int corgits_resume(struct platform_device *dev) ...@@ -258,7 +258,7 @@ static int corgits_resume(struct platform_device *dev)
corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS); corgi_ssp_ads7846_putget((4u << ADSCTRL_ADR_SH) | ADSCTRL_STS);
/* Enable Falling Edge */ /* Enable Falling Edge */
set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING); set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
corgi_ts->power_mode = PWR_MODE_ACTIVE; corgi_ts->power_mode = PWR_MODE_ACTIVE;
return 0; return 0;
...@@ -333,7 +333,7 @@ static int __init corgits_probe(struct platform_device *pdev) ...@@ -333,7 +333,7 @@ static int __init corgits_probe(struct platform_device *pdev)
corgi_ts->power_mode = PWR_MODE_ACTIVE; corgi_ts->power_mode = PWR_MODE_ACTIVE;
/* Enable Falling Edge */ /* Enable Falling Edge */
set_irq_type(corgi_ts->irq_gpio, IRQT_FALLING); set_irq_type(corgi_ts->irq_gpio, IRQ_TYPE_EDGE_FALLING);
return 0; return 0;
......
drivers/input/touchscreen/mainstone-wm97xx.c
浏览文件 @ 6cab4860
...@@ -198,7 +198,7 @@ static int wm97xx_acc_startup(struct wm97xx *wm) ...@@ -198,7 +198,7 @@ static int wm97xx_acc_startup(struct wm97xx *wm)
switch (wm->id) { switch (wm->id) {
case WM9705_ID2: case WM9705_ID2:
wm->pen_irq = IRQ_GPIO(4); wm->pen_irq = IRQ_GPIO(4);
set_irq_type(IRQ_GPIO(4), IRQT_BOTHEDGE); set_irq_type(IRQ_GPIO(4), IRQ_TYPE_EDGE_BOTH);
break; break;
case WM9712_ID2: case WM9712_ID2:
case WM9713_ID2: case WM9713_ID2:
......
drivers/mfd/asic3.c
浏览文件 @ 6cab4860
...@@ -256,28 +256,28 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type) ...@@ -256,28 +256,28 @@ static int asic3_gpio_irq_type(unsigned int irq, unsigned int type)
bank + ASIC3_GPIO_TRIGGER_TYPE); bank + ASIC3_GPIO_TRIGGER_TYPE);
asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit; asic->irq_bothedge[(irq - asic->irq_base) >> 4] &= ~bit;
if (type == IRQT_RISING) { if (type == IRQ_TYPE_EDGE_RISING) {
trigger |= bit; trigger |= bit;
edge |= bit; edge |= bit;
} else if (type == IRQT_FALLING) { } else if (type == IRQ_TYPE_EDGE_FALLING) {
trigger |= bit; trigger |= bit;
edge &= ~bit; edge &= ~bit;
} else if (type == IRQT_BOTHEDGE) { } else if (type == IRQ_TYPE_EDGE_BOTH) {
trigger |= bit; trigger |= bit;
if (asic3_gpio_get(&asic->gpio, irq - asic->irq_base)) if (asic3_gpio_get(&asic->gpio, irq - asic->irq_base))
edge &= ~bit; edge &= ~bit;
else else
edge |= bit; edge |= bit;
asic->irq_bothedge[(irq - asic->irq_base) >> 4] |= bit; asic->irq_bothedge[(irq - asic->irq_base) >> 4] |= bit;
} else if (type == IRQT_LOW) { } else if (type == IRQ_TYPE_LEVEL_LOW) {
trigger &= ~bit; trigger &= ~bit;
level &= ~bit; level &= ~bit;
} else if (type == IRQT_HIGH) { } else if (type == IRQ_TYPE_LEVEL_HIGH) {
trigger &= ~bit; trigger &= ~bit;
level |= bit; level |= bit;
} else { } else {
/* /*
* if type == IRQT_NOEDGE, we should mask interrupts, but * if type == IRQ_TYPE_NONE, we should mask interrupts, but
* be careful to not unmask them if mask was also called. * be careful to not unmask them if mask was also called.
* Probably need internal state for mask. * Probably need internal state for mask.
*/ */
...@@ -343,7 +343,7 @@ static int __init asic3_irq_probe(struct platform_device *pdev) ...@@ -343,7 +343,7 @@ static int __init asic3_irq_probe(struct platform_device *pdev)
ASIC3_INTMASK_GINTMASK); ASIC3_INTMASK_GINTMASK);
set_irq_chained_handler(asic->irq_nr, asic3_irq_demux); set_irq_chained_handler(asic->irq_nr, asic3_irq_demux);
set_irq_type(asic->irq_nr, IRQT_RISING); set_irq_type(asic->irq_nr, IRQ_TYPE_EDGE_RISING);
set_irq_data(asic->irq_nr, asic); set_irq_data(asic->irq_nr, asic);
return 0; return 0;
......
drivers/mfd/tc6393xb.c
浏览文件 @ 6cab4860
...@@ -324,7 +324,7 @@ static void tc6393xb_attach_irq(struct platform_device *dev) ...@@ -324,7 +324,7 @@ static void tc6393xb_attach_irq(struct platform_device *dev)
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
} }
set_irq_type(tc6393xb->irq, IRQT_FALLING); set_irq_type(tc6393xb->irq, IRQ_TYPE_EDGE_FALLING);
set_irq_data(tc6393xb->irq, tc6393xb); set_irq_data(tc6393xb->irq, tc6393xb);
set_irq_chained_handler(tc6393xb->irq, tc6393xb_irq); set_irq_chained_handler(tc6393xb->irq, tc6393xb_irq);
} }
......
drivers/pcmcia/soc_common.c
浏览文件 @ 6cab4860
...@@ -149,10 +149,10 @@ soc_common_pcmcia_config_skt(struct soc_pcmcia_socket *skt, socket_state_t *stat ...@@ -149,10 +149,10 @@ soc_common_pcmcia_config_skt(struct soc_pcmcia_socket *skt, socket_state_t *stat
*/ */
if (skt->irq_state != 1 && state->io_irq) { if (skt->irq_state != 1 && state->io_irq) {
skt->irq_state = 1; skt->irq_state = 1;
set_irq_type(skt->irq, IRQT_FALLING); set_irq_type(skt->irq, IRQ_TYPE_EDGE_FALLING);
} else if (skt->irq_state == 1 && state->io_irq == 0) { } else if (skt->irq_state == 1 && state->io_irq == 0) {
skt->irq_state = 0; skt->irq_state = 0;
set_irq_type(skt->irq, IRQT_NOEDGE); set_irq_type(skt->irq, IRQ_TYPE_NONE);
} }
skt->cs_state = *state; skt->cs_state = *state;
...@@ -527,7 +527,7 @@ int soc_pcmcia_request_irqs(struct soc_pcmcia_socket *skt, ...@@ -527,7 +527,7 @@ int soc_pcmcia_request_irqs(struct soc_pcmcia_socket *skt,
IRQF_DISABLED, irqs[i].str, skt); IRQF_DISABLED, irqs[i].str, skt);
if (res) if (res)
break; break;
set_irq_type(irqs[i].irq, IRQT_NOEDGE); set_irq_type(irqs[i].irq, IRQ_TYPE_NONE);
} }
if (res) { if (res) {
...@@ -560,7 +560,7 @@ void soc_pcmcia_disable_irqs(struct soc_pcmcia_socket *skt, ...@@ -560,7 +560,7 @@ void soc_pcmcia_disable_irqs(struct soc_pcmcia_socket *skt,
for (i = 0; i < nr; i++) for (i = 0; i < nr; i++)
if (irqs[i].sock == skt->nr) if (irqs[i].sock == skt->nr)
set_irq_type(irqs[i].irq, IRQT_NOEDGE); set_irq_type(irqs[i].irq, IRQ_TYPE_NONE);
} }
EXPORT_SYMBOL(soc_pcmcia_disable_irqs); EXPORT_SYMBOL(soc_pcmcia_disable_irqs);
...@@ -571,8 +571,8 @@ void soc_pcmcia_enable_irqs(struct soc_pcmcia_socket *skt, ...@@ -571,8 +571,8 @@ void soc_pcmcia_enable_irqs(struct soc_pcmcia_socket *skt,
for (i = 0; i < nr; i++) for (i = 0; i < nr; i++)
if (irqs[i].sock == skt->nr) { if (irqs[i].sock == skt->nr) {
set_irq_type(irqs[i].irq, IRQT_RISING); set_irq_type(irqs[i].irq, IRQ_TYPE_EDGE_RISING);
set_irq_type(irqs[i].irq, IRQT_BOTHEDGE); set_irq_type(irqs[i].irq, IRQ_TYPE_EDGE_BOTH);
} }
} }
EXPORT_SYMBOL(soc_pcmcia_enable_irqs); EXPORT_SYMBOL(soc_pcmcia_enable_irqs);
......
drivers/video/am200epd.c
浏览文件 @ 6cab4860
...@@ -221,7 +221,7 @@ static int am200_setup_irq(struct fb_info *info) ...@@ -221,7 +221,7 @@ static int am200_setup_irq(struct fb_info *info)
return retval; return retval;
} }
return set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQT_FALLING); return set_irq_type(IRQ_GPIO(RDY_GPIO_PIN), IRQ_TYPE_EDGE_FALLING);
} }
static void am200_set_rst(struct metronomefb_par *par, int state) static void am200_set_rst(struct metronomefb_par *par, int state)
......
drivers/video/omap/sossi.c
浏览文件 @ 6cab4860
...@@ -646,7 +646,7 @@ static int sossi_init(struct omapfb_device *fbdev) ...@@ -646,7 +646,7 @@ static int sossi_init(struct omapfb_device *fbdev)
sossi_write_reg(SOSSI_INIT1_REG, l); sossi_write_reg(SOSSI_INIT1_REG, l);
if ((r = request_irq(INT_1610_SoSSI_MATCH, sossi_match_irq, if ((r = request_irq(INT_1610_SoSSI_MATCH, sossi_match_irq,
IRQT_FALLING, IRQ_TYPE_EDGE_FALLING,
"sossi_match", sossi.fbdev->dev)) < 0) { "sossi_match", sossi.fbdev->dev)) < 0) {
dev_err(sossi.fbdev->dev, "can't get SoSSI match IRQ\n"); dev_err(sossi.fbdev->dev, "can't get SoSSI match IRQ\n");
goto err; goto err;
......
include/asm-arm/arch-pnx4008/irqs.h
浏览文件 @ 6cab4860
...@@ -135,30 +135,30 @@ ...@@ -135,30 +135,30 @@
#define PNX4008_IRQ_TYPES \ #define PNX4008_IRQ_TYPES \
{ /*IRQ #'s: */ \ { /*IRQ #'s: */ \
IRQT_LOW, IRQT_LOW, IRQT_LOW, IRQT_HIGH, /* 0, 1, 2, 3 */ \ IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 0, 1, 2, 3 */ \
IRQT_LOW, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 4, 5, 6, 7 */ \ IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 4, 5, 6, 7 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 8, 9,10,11 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 8, 9,10,11 */ \
IRQT_LOW, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 12,13,14,15 */ \ IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 16,17,18,19 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 20,21,22,23 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 24,25,26,27 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_LOW, /* 28,29,30,31 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 28,29,30,31 */ \
IRQT_HIGH, IRQT_LOW, IRQT_HIGH, IRQT_HIGH, /* 32,33,34,35 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_FALLING, IRQT_HIGH, /* 36,37,38,39 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 40,41,42,43 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 44,45,46,47 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_LOW, /* 48,49,50,51 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_LOW, /* 48,49,50,51 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 52,53,54,55 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_LOW, IRQT_HIGH, /* 56,57,58,59 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW, IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 60,61,62,63 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 64,65,66,67 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 68,69,70,71 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 72,73,74,75 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 76,77,78,79 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 80,81,82,83 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 84,85,86,87 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 88,89,90,91 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */ \
IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, IRQT_HIGH, /* 92,93,94,95 */ \ IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */ \
} }
/* Start Enable Pin Interrupts - table 58 page 66 */ /* Start Enable Pin Interrupts - table 58 page 66 */
......
include/asm-arm/arch-pxa/idp.h
浏览文件 @ 6cab4860
...@@ -138,18 +138,18 @@ ...@@ -138,18 +138,18 @@
#define TOUCH_PANEL_IRQ IRQ_GPIO(5) #define TOUCH_PANEL_IRQ IRQ_GPIO(5)
#define IDE_IRQ IRQ_GPIO(21) #define IDE_IRQ IRQ_GPIO(21)
#define TOUCH_PANEL_IRQ_EDGE IRQT_FALLING #define TOUCH_PANEL_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
#define ETHERNET_IRQ IRQ_GPIO(4) #define ETHERNET_IRQ IRQ_GPIO(4)
#define ETHERNET_IRQ_EDGE IRQT_RISING #define ETHERNET_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define IDE_IRQ_EDGE IRQT_RISING #define IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define PCMCIA_S0_CD_VALID IRQ_GPIO(7) #define PCMCIA_S0_CD_VALID IRQ_GPIO(7)
#define PCMCIA_S0_CD_VALID_EDGE IRQT_BOTHEDGE #define PCMCIA_S0_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH
#define PCMCIA_S1_CD_VALID IRQ_GPIO(8) #define PCMCIA_S1_CD_VALID IRQ_GPIO(8)
#define PCMCIA_S1_CD_VALID_EDGE IRQT_BOTHEDGE #define PCMCIA_S1_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH
#define PCMCIA_S0_RDYINT IRQ_GPIO(19) #define PCMCIA_S0_RDYINT IRQ_GPIO(19)
#define PCMCIA_S1_RDYINT IRQ_GPIO(22) #define PCMCIA_S1_RDYINT IRQ_GPIO(22)
......
include/asm-arm/arch-pxa/pcm990_baseboard.h
浏览文件 @ 6cab4860
...@@ -29,14 +29,14 @@ ...@@ -29,14 +29,14 @@
/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */ /* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
#define PCM990_CTRL_INT_IRQ_GPIO 9 #define PCM990_CTRL_INT_IRQ_GPIO 9
#define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO) #define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
#define PCM990_CTRL_INT_IRQ_EDGE IRQT_RISING #define PCM990_CTRL_INT_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */ #define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */
#define PCM990_CTRL_BASE 0xea000000 #define PCM990_CTRL_BASE 0xea000000
#define PCM990_CTRL_SIZE (1*1024*1024) #define PCM990_CTRL_SIZE (1*1024*1024)
#define PCM990_CTRL_PWR_IRQ_GPIO 14 #define PCM990_CTRL_PWR_IRQ_GPIO 14
#define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO) #define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
#define PCM990_CTRL_PWR_IRQ_EDGE IRQT_RISING #define PCM990_CTRL_PWR_IRQ_EDGE IRQ_TYPE_EDGE_RISING
/* visible CPLD (U7) registers */ /* visible CPLD (U7) registers */
#define PCM990_CTRL_REG0 0x0000 /* RESET REGISTER */ #define PCM990_CTRL_REG0 0x0000 /* RESET REGISTER */
...@@ -133,7 +133,7 @@ ...@@ -133,7 +133,7 @@
*/ */
#define PCM990_IDE_IRQ_GPIO 13 #define PCM990_IDE_IRQ_GPIO 13
#define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO) #define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
#define PCM990_IDE_IRQ_EDGE IRQT_RISING #define PCM990_IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */ #define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */
#define PCM990_IDE_PLD_BASE 0xee000000 #define PCM990_IDE_PLD_BASE 0xee000000
#define PCM990_IDE_PLD_SIZE (1*1024*1024) #define PCM990_IDE_PLD_SIZE (1*1024*1024)
...@@ -189,11 +189,11 @@ ...@@ -189,11 +189,11 @@
*/ */
#define PCM990_CF_IRQ_GPIO 11 #define PCM990_CF_IRQ_GPIO 11
#define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO) #define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO)
#define PCM990_CF_IRQ_EDGE IRQT_RISING #define PCM990_CF_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define PCM990_CF_CD_GPIO 12 #define PCM990_CF_CD_GPIO 12
#define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO) #define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO)
#define PCM990_CF_CD_EDGE IRQT_RISING #define PCM990_CF_CD_EDGE IRQ_TYPE_EDGE_RISING
#define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */ #define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */
#define PCM990_CF_PLD_BASE 0xef000000 #define PCM990_CF_PLD_BASE 0xef000000
...@@ -259,14 +259,14 @@ ...@@ -259,14 +259,14 @@
*/ */
#define PCM990_AC97_IRQ_GPIO 10 #define PCM990_AC97_IRQ_GPIO 10
#define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO) #define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
#define PCM990_AC97_IRQ_EDGE IRQT_RISING #define PCM990_AC97_IRQ_EDGE IRQ_TYPE_EDGE_RISING
/* /*
* MMC phyCORE * MMC phyCORE
*/ */
#define PCM990_MMC0_IRQ_GPIO 9 #define PCM990_MMC0_IRQ_GPIO 9
#define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO) #define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
#define PCM990_MMC0_IRQ_EDGE IRQT_FALLING #define PCM990_MMC0_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
/* /*
* USB phyCore * USB phyCore
......
include/asm-arm/arch-sa1100/ide.h
浏览文件 @ 6cab4860
...@@ -61,7 +61,7 @@ ide_init_default_hwifs(void) ...@@ -61,7 +61,7 @@ ide_init_default_hwifs(void)
/* Enable GPIO as interrupt line */ /* Enable GPIO as interrupt line */
GPDR &= ~LART_GPIO_IDE; GPDR &= ~LART_GPIO_IDE;
set_irq_type(LART_IRQ_IDE, IRQT_RISING); set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING);
/* set PCMCIA interface timing */ /* set PCMCIA interface timing */
MECR = 0x00060006; MECR = 0x00060006;
......
include/asm-arm/irq.h
浏览文件 @ 6cab4860
...@@ -19,23 +19,6 @@ ...@@ -19,23 +19,6 @@
#define NO_IRQ ((unsigned int)(-1)) #define NO_IRQ ((unsigned int)(-1))
#endif #endif
/*
* Migration helpers
*/
#define __IRQT_FALEDGE IRQ_TYPE_EDGE_FALLING
#define __IRQT_RISEDGE IRQ_TYPE_EDGE_RISING
#define __IRQT_LOWLVL IRQ_TYPE_LEVEL_LOW
#define __IRQT_HIGHLVL IRQ_TYPE_LEVEL_HIGH
#define IRQT_NOEDGE (0)
#define IRQT_RISING (__IRQT_RISEDGE)
#define IRQT_FALLING (__IRQT_FALEDGE)
#define IRQT_BOTHEDGE (__IRQT_RISEDGE|__IRQT_FALEDGE)
#define IRQT_LOW (__IRQT_LOWLVL)
#define IRQT_HIGH (__IRQT_HIGHLVL)
#define IRQT_PROBE IRQ_TYPE_PROBE
#ifndef __ASSEMBLY__ #ifndef __ASSEMBLY__
struct irqaction; struct irqaction;
extern void migrate_irqs(void); extern void migrate_irqs(void);
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或