mmc: dw_mmc: Convert to mmc_send_tuning()

Instead of having a local hack taking care of sending the tuning
command and as well to verify the response pattern, let's convert to
the common mmc_send_tuning() API.

This change affects the Exynos variant, since it's the only one which
support the dw_mmc's ->execute_tuning() callback.

It's seems like dw_mmc internal logic expects failed data transfers to
be ended using a stop command. Let the tuning requests also fall into
this category, since there are data transfer involved.
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Acked-by: NJaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: NAlim Akhtar <alim.akhtar@samsung.com>
Tested-by: NAlim Akhtar <alim.akhtar@samsung.com>

drivers/mmc/host/dw_mmc-exynos.c

@@ -340,64 +340,23 @@ static s8 dw_mci_exynos_get_best_clksmpl(u8 candiates)
 	return loc;
 }
 
-static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot, u32 opcode,
-					struct dw_mci_tuning_data *tuning_data)
+static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot)
 {
 	struct dw_mci *host = slot->host;
 	struct mmc_host *mmc = slot->mmc;
-	const u8 *blk_pattern = tuning_data->blk_pattern;
-	u8 *blk_test;
-	unsigned int blksz = tuning_data->blksz;
 	u8 start_smpl, smpl, candiates = 0;
 	s8 found = -1;
 	int ret = 0;
 
-	blk_test = kmalloc(blksz, GFP_KERNEL);
-	if (!blk_test)
-		return -ENOMEM;
-
 	start_smpl = dw_mci_exynos_get_clksmpl(host);
 
 	do {
-		struct mmc_request mrq = {NULL};
-		struct mmc_command cmd = {0};
-		struct mmc_command stop = {0};
-		struct mmc_data data = {0};
-		struct scatterlist sg;
-
-		cmd.opcode = opcode;
-		cmd.arg = 0;
-		cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-
-		stop.opcode = MMC_STOP_TRANSMISSION;
-		stop.arg = 0;
-		stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
-
-		data.blksz = blksz;
-		data.blocks = 1;
-		data.flags = MMC_DATA_READ;
-		data.sg = &sg;
-		data.sg_len = 1;
-
-		sg_init_one(&sg, blk_test, blksz);
-		mrq.cmd = &cmd;
-		mrq.stop = &stop;
-		mrq.data = &data;
-		host->mrq = &mrq;
-
 		mci_writel(host, TMOUT, ~0);
 		smpl = dw_mci_exynos_move_next_clksmpl(host);
 
-		mmc_wait_for_req(mmc, &mrq);
-
-		if (!cmd.error && !data.error) {
-			if (!memcmp(blk_pattern, blk_test, blksz))
+		if (!mmc_send_tuning(mmc))
 			candiates |= (1 << smpl);
-		} else {
-			dev_dbg(host->dev,
-				"Tuning error: cmd.error:%d, data.error:%d\n",
-				cmd.error, data.error);
-		}
+
 	} while (start_smpl != smpl);
 
 	found = dw_mci_exynos_get_best_clksmpl(candiates);
@@ -406,7 +365,6 @@ static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot, u32 opcode,
 	else
 		ret = -EIO;
 
-	kfree(blk_test);
 	return ret;
 }
 

drivers/mmc/host/dw_mmc.c

@@ -314,7 +314,9 @@ static u32 dw_mci_prep_stop_abort(struct dw_mci *host, struct mmc_command *cmd)
 	if (cmdr == MMC_READ_SINGLE_BLOCK ||
 	    cmdr == MMC_READ_MULTIPLE_BLOCK ||
 	    cmdr == MMC_WRITE_BLOCK ||
-	    cmdr == MMC_WRITE_MULTIPLE_BLOCK) {
+	    cmdr == MMC_WRITE_MULTIPLE_BLOCK ||
+	    cmdr == MMC_SEND_TUNING_BLOCK ||
+	    cmdr == MMC_SEND_TUNING_BLOCK_HS200) {
 		stop->opcode = MMC_STOP_TRANSMISSION;
 		stop->arg = 0;
 		stop->flags = MMC_RSP_R1B | MMC_CMD_AC;
@@ -1312,30 +1314,10 @@ static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	struct dw_mci_slot *slot = mmc_priv(mmc);
 	struct dw_mci *host = slot->host;
 	const struct dw_mci_drv_data *drv_data = host->drv_data;
-	struct dw_mci_tuning_data tuning_data;
 	int err = -ENOSYS;
 
-	if (opcode == MMC_SEND_TUNING_BLOCK_HS200) {
-		if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) {
-			tuning_data.blk_pattern = tuning_blk_pattern_8bit;
-			tuning_data.blksz = sizeof(tuning_blk_pattern_8bit);
-		} else if (mmc->ios.bus_width == MMC_BUS_WIDTH_4) {
-			tuning_data.blk_pattern = tuning_blk_pattern_4bit;
-			tuning_data.blksz = sizeof(tuning_blk_pattern_4bit);
-		} else {
-			return -EINVAL;
-		}
-	} else if (opcode == MMC_SEND_TUNING_BLOCK) {
-		tuning_data.blk_pattern = tuning_blk_pattern_4bit;
-		tuning_data.blksz = sizeof(tuning_blk_pattern_4bit);
-	} else {
-		dev_err(host->dev,
-			"Undefined command(%d) for tuning\n", opcode);
-		return -EINVAL;
-	}
-
 	if (drv_data && drv_data->execute_tuning)
-		err = drv_data->execute_tuning(slot, opcode, &tuning_data);
+		err = drv_data->execute_tuning(slot);
 	return err;
 }
 

drivers/mmc/host/dw_mmc.h

@@ -249,11 +249,6 @@ struct dw_mci_slot {
 	int			sdio_id;
 };
 
-struct dw_mci_tuning_data {
-	const u8 *blk_pattern;
-	unsigned int blksz;
-};
-
 /**
  * dw_mci driver data - dw-mshc implementation specific driver data.
  * @caps: mmc subsystem specified capabilities of the controller(s).
@@ -275,7 +270,6 @@ struct dw_mci_drv_data {
 	void		(*prepare_command)(struct dw_mci *host, u32 *cmdr);
 	void		(*set_ios)(struct dw_mci *host, struct mmc_ios *ios);
 	int		(*parse_dt)(struct dw_mci *host);
-	int		(*execute_tuning)(struct dw_mci_slot *slot, u32 opcode,
-					struct dw_mci_tuning_data *tuning_data);
+	int		(*execute_tuning)(struct dw_mci_slot *slot);
 };
 #endif /* _DW_MMC_H_ */