From 6bdd533cee9aadbcd476af30bfff079abe68fcdb Mon Sep 17 00:00:00 2001 From: Sean Young Date: Sun, 27 May 2018 12:24:10 +0100 Subject: [PATCH] bpf: add selftest for lirc_mode2 type program This is simple test over rc-loopback. Acked-by: Yonghong Song Signed-off-by: Sean Young Signed-off-by: Daniel Borkmann --- tools/bpf/bpftool/prog.c | 1 + tools/include/uapi/linux/bpf.h | 79 +++++-- tools/include/uapi/linux/lirc.h | 217 ++++++++++++++++++ tools/lib/bpf/libbpf.c | 1 + tools/testing/selftests/bpf/.gitignore | 1 + tools/testing/selftests/bpf/Makefile | 7 +- tools/testing/selftests/bpf/bpf_helpers.h | 5 + .../testing/selftests/bpf/test_lirc_mode2.sh | 28 +++ .../selftests/bpf/test_lirc_mode2_kern.c | 23 ++ .../selftests/bpf/test_lirc_mode2_user.c | 149 ++++++++++++ 10 files changed, 494 insertions(+), 17 deletions(-) create mode 100644 tools/include/uapi/linux/lirc.h create mode 100755 tools/testing/selftests/bpf/test_lirc_mode2.sh create mode 100644 tools/testing/selftests/bpf/test_lirc_mode2_kern.c create mode 100644 tools/testing/selftests/bpf/test_lirc_mode2_user.c diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c index 39b88e760367..a4f435203fef 100644 --- a/tools/bpf/bpftool/prog.c +++ b/tools/bpf/bpftool/prog.c @@ -71,6 +71,7 @@ static const char * const prog_type_name[] = { [BPF_PROG_TYPE_SK_MSG] = "sk_msg", [BPF_PROG_TYPE_RAW_TRACEPOINT] = "raw_tracepoint", [BPF_PROG_TYPE_CGROUP_SOCK_ADDR] = "cgroup_sock_addr", + [BPF_PROG_TYPE_LIRC_MODE2] = "lirc_mode2", }; static void print_boot_time(__u64 nsecs, char *buf, unsigned int size) diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index 3f556b35ac8d..64ac0f7a689e 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -143,6 +143,7 @@ enum bpf_prog_type { BPF_PROG_TYPE_RAW_TRACEPOINT, BPF_PROG_TYPE_CGROUP_SOCK_ADDR, BPF_PROG_TYPE_LWT_SEG6LOCAL, + BPF_PROG_TYPE_LIRC_MODE2, }; enum bpf_attach_type { @@ -162,6 +163,7 @@ enum bpf_attach_type { BPF_CGROUP_INET6_POST_BIND, BPF_CGROUP_UDP4_SENDMSG, BPF_CGROUP_UDP6_SENDMSG, + BPF_LIRC_MODE2, __MAX_BPF_ATTACH_TYPE }; @@ -1852,10 +1854,10 @@ union bpf_attr { * If lookup is successful and result shows packet is to be * forwarded, the neighbor tables are searched for the nexthop. * If successful (ie., FIB lookup shows forwarding and nexthop - * is resolved), the nexthop address is returned in ipv4_dst, - * ipv6_dst or mpls_out based on family, smac is set to mac - * address of egress device, dmac is set to nexthop mac address, - * rt_metric is set to metric from route. + * is resolved), the nexthop address is returned in ipv4_dst + * or ipv6_dst based on family, smac is set to mac address of + * egress device, dmac is set to nexthop mac address, rt_metric + * is set to metric from route (IPv4/IPv6 only). * * *plen* argument is the size of the passed in struct. * *flags* argument can be a combination of one or more of the @@ -2005,6 +2007,53 @@ union bpf_attr { * direct packet access. * Return * 0 on success, or a negative error in case of failure. + * + * int bpf_rc_keydown(void *ctx, u32 protocol, u64 scancode, u32 toggle) + * Description + * This helper is used in programs implementing IR decoding, to + * report a successfully decoded key press with *scancode*, + * *toggle* value in the given *protocol*. The scancode will be + * translated to a keycode using the rc keymap, and reported as + * an input key down event. After a period a key up event is + * generated. This period can be extended by calling either + * **bpf_rc_keydown** () again with the same values, or calling + * **bpf_rc_repeat** (). + * + * Some protocols include a toggle bit, in case the button was + * released and pressed again between consecutive scancodes. + * + * The *ctx* should point to the lirc sample as passed into + * the program. + * + * The *protocol* is the decoded protocol number (see + * **enum rc_proto** for some predefined values). + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_BPF_LIRC_MODE2** configuration option set to + * "**y**". + * + * Return + * 0 + * + * int bpf_rc_repeat(void *ctx) + * Description + * This helper is used in programs implementing IR decoding, to + * report a successfully decoded repeat key message. This delays + * the generation of a key up event for previously generated + * key down event. + * + * Some IR protocols like NEC have a special IR message for + * repeating last button, for when a button is held down. + * + * The *ctx* should point to the lirc sample as passed into + * the program. + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_BPF_LIRC_MODE2** configuration option set to + * "**y**". + * + * Return + * 0 */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -2083,7 +2132,9 @@ union bpf_attr { FN(lwt_push_encap), \ FN(lwt_seg6_store_bytes), \ FN(lwt_seg6_adjust_srh), \ - FN(lwt_seg6_action), + FN(lwt_seg6_action), \ + FN(rc_repeat), \ + FN(rc_keydown), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call @@ -2537,8 +2588,10 @@ struct bpf_raw_tracepoint_args { #define BPF_FIB_LOOKUP_OUTPUT BIT(1) struct bpf_fib_lookup { - /* input */ - __u8 family; /* network family, AF_INET, AF_INET6, AF_MPLS */ + /* input: network family for lookup (AF_INET, AF_INET6) + * output: network family of egress nexthop + */ + __u8 family; /* set if lookup is to consider L4 data - e.g., FIB rules */ __u8 l4_protocol; @@ -2554,22 +2607,20 @@ struct bpf_fib_lookup { __u8 tos; /* AF_INET */ __be32 flowlabel; /* AF_INET6 */ - /* output: metric of fib result */ - __u32 rt_metric; + /* output: metric of fib result (IPv4/IPv6 only) */ + __u32 rt_metric; }; union { - __be32 mpls_in; __be32 ipv4_src; __u32 ipv6_src[4]; /* in6_addr; network order */ }; - /* input to bpf_fib_lookup, *dst is destination address. - * output: bpf_fib_lookup sets to gateway address + /* input to bpf_fib_lookup, ipv{4,6}_dst is destination address in + * network header. output: bpf_fib_lookup sets to gateway address + * if FIB lookup returns gateway route */ union { - /* return for MPLS lookups */ - __be32 mpls_out[4]; /* support up to 4 labels */ __be32 ipv4_dst; __u32 ipv6_dst[4]; /* in6_addr; network order */ }; diff --git a/tools/include/uapi/linux/lirc.h b/tools/include/uapi/linux/lirc.h new file mode 100644 index 000000000000..f189931042a7 --- /dev/null +++ b/tools/include/uapi/linux/lirc.h @@ -0,0 +1,217 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * lirc.h - linux infrared remote control header file + * last modified 2010/07/13 by Jarod Wilson + */ + +#ifndef _LINUX_LIRC_H +#define _LINUX_LIRC_H + +#include +#include + +#define PULSE_BIT 0x01000000 +#define PULSE_MASK 0x00FFFFFF + +#define LIRC_MODE2_SPACE 0x00000000 +#define LIRC_MODE2_PULSE 0x01000000 +#define LIRC_MODE2_FREQUENCY 0x02000000 +#define LIRC_MODE2_TIMEOUT 0x03000000 + +#define LIRC_VALUE_MASK 0x00FFFFFF +#define LIRC_MODE2_MASK 0xFF000000 + +#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) +#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) +#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) +#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) + +#define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK) +#define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK) + +#define LIRC_IS_SPACE(val) (LIRC_MODE2(val) == LIRC_MODE2_SPACE) +#define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE) +#define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY) +#define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT) + +/* used heavily by lirc userspace */ +#define lirc_t int + +/*** lirc compatible hardware features ***/ + +#define LIRC_MODE2SEND(x) (x) +#define LIRC_SEND2MODE(x) (x) +#define LIRC_MODE2REC(x) ((x) << 16) +#define LIRC_REC2MODE(x) ((x) >> 16) + +#define LIRC_MODE_RAW 0x00000001 +#define LIRC_MODE_PULSE 0x00000002 +#define LIRC_MODE_MODE2 0x00000004 +#define LIRC_MODE_SCANCODE 0x00000008 +#define LIRC_MODE_LIRCCODE 0x00000010 + + +#define LIRC_CAN_SEND_RAW LIRC_MODE2SEND(LIRC_MODE_RAW) +#define LIRC_CAN_SEND_PULSE LIRC_MODE2SEND(LIRC_MODE_PULSE) +#define LIRC_CAN_SEND_MODE2 LIRC_MODE2SEND(LIRC_MODE_MODE2) +#define LIRC_CAN_SEND_LIRCCODE LIRC_MODE2SEND(LIRC_MODE_LIRCCODE) + +#define LIRC_CAN_SEND_MASK 0x0000003f + +#define LIRC_CAN_SET_SEND_CARRIER 0x00000100 +#define LIRC_CAN_SET_SEND_DUTY_CYCLE 0x00000200 +#define LIRC_CAN_SET_TRANSMITTER_MASK 0x00000400 + +#define LIRC_CAN_REC_RAW LIRC_MODE2REC(LIRC_MODE_RAW) +#define LIRC_CAN_REC_PULSE LIRC_MODE2REC(LIRC_MODE_PULSE) +#define LIRC_CAN_REC_MODE2 LIRC_MODE2REC(LIRC_MODE_MODE2) +#define LIRC_CAN_REC_SCANCODE LIRC_MODE2REC(LIRC_MODE_SCANCODE) +#define LIRC_CAN_REC_LIRCCODE LIRC_MODE2REC(LIRC_MODE_LIRCCODE) + +#define LIRC_CAN_REC_MASK LIRC_MODE2REC(LIRC_CAN_SEND_MASK) + +#define LIRC_CAN_SET_REC_CARRIER (LIRC_CAN_SET_SEND_CARRIER << 16) +#define LIRC_CAN_SET_REC_DUTY_CYCLE (LIRC_CAN_SET_SEND_DUTY_CYCLE << 16) + +#define LIRC_CAN_SET_REC_DUTY_CYCLE_RANGE 0x40000000 +#define LIRC_CAN_SET_REC_CARRIER_RANGE 0x80000000 +#define LIRC_CAN_GET_REC_RESOLUTION 0x20000000 +#define LIRC_CAN_SET_REC_TIMEOUT 0x10000000 +#define LIRC_CAN_SET_REC_FILTER 0x08000000 + +#define LIRC_CAN_MEASURE_CARRIER 0x02000000 +#define LIRC_CAN_USE_WIDEBAND_RECEIVER 0x04000000 + +#define LIRC_CAN_SEND(x) ((x)&LIRC_CAN_SEND_MASK) +#define LIRC_CAN_REC(x) ((x)&LIRC_CAN_REC_MASK) + +#define LIRC_CAN_NOTIFY_DECODE 0x01000000 + +/*** IOCTL commands for lirc driver ***/ + +#define LIRC_GET_FEATURES _IOR('i', 0x00000000, __u32) + +#define LIRC_GET_SEND_MODE _IOR('i', 0x00000001, __u32) +#define LIRC_GET_REC_MODE _IOR('i', 0x00000002, __u32) +#define LIRC_GET_REC_RESOLUTION _IOR('i', 0x00000007, __u32) + +#define LIRC_GET_MIN_TIMEOUT _IOR('i', 0x00000008, __u32) +#define LIRC_GET_MAX_TIMEOUT _IOR('i', 0x00000009, __u32) + +/* code length in bits, currently only for LIRC_MODE_LIRCCODE */ +#define LIRC_GET_LENGTH _IOR('i', 0x0000000f, __u32) + +#define LIRC_SET_SEND_MODE _IOW('i', 0x00000011, __u32) +#define LIRC_SET_REC_MODE _IOW('i', 0x00000012, __u32) +/* Note: these can reset the according pulse_width */ +#define LIRC_SET_SEND_CARRIER _IOW('i', 0x00000013, __u32) +#define LIRC_SET_REC_CARRIER _IOW('i', 0x00000014, __u32) +#define LIRC_SET_SEND_DUTY_CYCLE _IOW('i', 0x00000015, __u32) +#define LIRC_SET_TRANSMITTER_MASK _IOW('i', 0x00000017, __u32) + +/* + * when a timeout != 0 is set the driver will send a + * LIRC_MODE2_TIMEOUT data packet, otherwise LIRC_MODE2_TIMEOUT is + * never sent, timeout is disabled by default + */ +#define LIRC_SET_REC_TIMEOUT _IOW('i', 0x00000018, __u32) + +/* 1 enables, 0 disables timeout reports in MODE2 */ +#define LIRC_SET_REC_TIMEOUT_REPORTS _IOW('i', 0x00000019, __u32) + +/* + * if enabled from the next key press on the driver will send + * LIRC_MODE2_FREQUENCY packets + */ +#define LIRC_SET_MEASURE_CARRIER_MODE _IOW('i', 0x0000001d, __u32) + +/* + * to set a range use LIRC_SET_REC_CARRIER_RANGE with the + * lower bound first and later LIRC_SET_REC_CARRIER with the upper bound + */ +#define LIRC_SET_REC_CARRIER_RANGE _IOW('i', 0x0000001f, __u32) + +#define LIRC_SET_WIDEBAND_RECEIVER _IOW('i', 0x00000023, __u32) + +/* + * struct lirc_scancode - decoded scancode with protocol for use with + * LIRC_MODE_SCANCODE + * + * @timestamp: Timestamp in nanoseconds using CLOCK_MONOTONIC when IR + * was decoded. + * @flags: should be 0 for transmit. When receiving scancodes, + * LIRC_SCANCODE_FLAG_TOGGLE or LIRC_SCANCODE_FLAG_REPEAT can be set + * depending on the protocol + * @rc_proto: see enum rc_proto + * @keycode: the translated keycode. Set to 0 for transmit. + * @scancode: the scancode received or to be sent + */ +struct lirc_scancode { + __u64 timestamp; + __u16 flags; + __u16 rc_proto; + __u32 keycode; + __u64 scancode; +}; + +/* Set if the toggle bit of rc-5 or rc-6 is enabled */ +#define LIRC_SCANCODE_FLAG_TOGGLE 1 +/* Set if this is a nec or sanyo repeat */ +#define LIRC_SCANCODE_FLAG_REPEAT 2 + +/** + * enum rc_proto - the Remote Controller protocol + * + * @RC_PROTO_UNKNOWN: Protocol not known + * @RC_PROTO_OTHER: Protocol known but proprietary + * @RC_PROTO_RC5: Philips RC5 protocol + * @RC_PROTO_RC5X_20: Philips RC5x 20 bit protocol + * @RC_PROTO_RC5_SZ: StreamZap variant of RC5 + * @RC_PROTO_JVC: JVC protocol + * @RC_PROTO_SONY12: Sony 12 bit protocol + * @RC_PROTO_SONY15: Sony 15 bit protocol + * @RC_PROTO_SONY20: Sony 20 bit protocol + * @RC_PROTO_NEC: NEC protocol + * @RC_PROTO_NECX: Extended NEC protocol + * @RC_PROTO_NEC32: NEC 32 bit protocol + * @RC_PROTO_SANYO: Sanyo protocol + * @RC_PROTO_MCIR2_KBD: RC6-ish MCE keyboard + * @RC_PROTO_MCIR2_MSE: RC6-ish MCE mouse + * @RC_PROTO_RC6_0: Philips RC6-0-16 protocol + * @RC_PROTO_RC6_6A_20: Philips RC6-6A-20 protocol + * @RC_PROTO_RC6_6A_24: Philips RC6-6A-24 protocol + * @RC_PROTO_RC6_6A_32: Philips RC6-6A-32 protocol + * @RC_PROTO_RC6_MCE: MCE (Philips RC6-6A-32 subtype) protocol + * @RC_PROTO_SHARP: Sharp protocol + * @RC_PROTO_XMP: XMP protocol + * @RC_PROTO_CEC: CEC protocol + * @RC_PROTO_IMON: iMon Pad protocol + */ +enum rc_proto { + RC_PROTO_UNKNOWN = 0, + RC_PROTO_OTHER = 1, + RC_PROTO_RC5 = 2, + RC_PROTO_RC5X_20 = 3, + RC_PROTO_RC5_SZ = 4, + RC_PROTO_JVC = 5, + RC_PROTO_SONY12 = 6, + RC_PROTO_SONY15 = 7, + RC_PROTO_SONY20 = 8, + RC_PROTO_NEC = 9, + RC_PROTO_NECX = 10, + RC_PROTO_NEC32 = 11, + RC_PROTO_SANYO = 12, + RC_PROTO_MCIR2_KBD = 13, + RC_PROTO_MCIR2_MSE = 14, + RC_PROTO_RC6_0 = 15, + RC_PROTO_RC6_6A_20 = 16, + RC_PROTO_RC6_6A_24 = 17, + RC_PROTO_RC6_6A_32 = 18, + RC_PROTO_RC6_MCE = 19, + RC_PROTO_SHARP = 20, + RC_PROTO_XMP = 21, + RC_PROTO_CEC = 22, + RC_PROTO_IMON = 23, +}; + +#endif diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index b1a60ac8424e..a1e96b5de5ff 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -1462,6 +1462,7 @@ static bool bpf_prog_type__needs_kver(enum bpf_prog_type type) case BPF_PROG_TYPE_CGROUP_DEVICE: case BPF_PROG_TYPE_SK_MSG: case BPF_PROG_TYPE_CGROUP_SOCK_ADDR: + case BPF_PROG_TYPE_LIRC_MODE2: return false; case BPF_PROG_TYPE_UNSPEC: case BPF_PROG_TYPE_KPROBE: diff --git a/tools/testing/selftests/bpf/.gitignore b/tools/testing/selftests/bpf/.gitignore index adc8e5474b66..6ea835982464 100644 --- a/tools/testing/selftests/bpf/.gitignore +++ b/tools/testing/selftests/bpf/.gitignore @@ -17,3 +17,4 @@ test_sock_addr urandom_read test_btf test_sockmap +test_lirc_mode2_user diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index a1b66da965d0..553d1816b77a 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -24,7 +24,7 @@ urandom_read: urandom_read.c # Order correspond to 'make run_tests' order TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs \ test_align test_verifier_log test_dev_cgroup test_tcpbpf_user \ - test_sock test_btf test_sockmap + test_sock test_btf test_sockmap test_lirc_mode2_user TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o test_obj_id.o \ test_pkt_md_access.o test_xdp_redirect.o test_xdp_meta.o sockmap_parse_prog.o \ @@ -34,7 +34,7 @@ TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o test sockmap_tcp_msg_prog.o connect4_prog.o connect6_prog.o test_adjust_tail.o \ test_btf_haskv.o test_btf_nokv.o test_sockmap_kern.o test_tunnel_kern.o \ test_get_stack_rawtp.o test_sockmap_kern.o test_sockhash_kern.o \ - test_lwt_seg6local.o sendmsg4_prog.o sendmsg6_prog.o + test_lwt_seg6local.o sendmsg4_prog.o sendmsg6_prog.o test_lirc_mode2_kern.o # Order correspond to 'make run_tests' order TEST_PROGS := test_kmod.sh \ @@ -44,7 +44,8 @@ TEST_PROGS := test_kmod.sh \ test_offload.py \ test_sock_addr.sh \ test_tunnel.sh \ - test_lwt_seg6local.sh + test_lwt_seg6local.sh \ + test_lirc_mode2.sh # Compile but not part of 'make run_tests' TEST_GEN_PROGS_EXTENDED = test_libbpf_open test_sock_addr diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h index 334d3e8c5e89..a66a9d91acf4 100644 --- a/tools/testing/selftests/bpf/bpf_helpers.h +++ b/tools/testing/selftests/bpf/bpf_helpers.h @@ -126,6 +126,11 @@ static int (*bpf_lwt_seg6_action)(void *ctx, unsigned int action, void *param, static int (*bpf_lwt_seg6_adjust_srh)(void *ctx, unsigned int offset, unsigned int len) = (void *) BPF_FUNC_lwt_seg6_adjust_srh; +static int (*bpf_rc_repeat)(void *ctx) = + (void *) BPF_FUNC_rc_repeat; +static int (*bpf_rc_keydown)(void *ctx, unsigned int protocol, + unsigned long long scancode, unsigned int toggle) = + (void *) BPF_FUNC_rc_keydown; /* llvm builtin functions that eBPF C program may use to * emit BPF_LD_ABS and BPF_LD_IND instructions diff --git a/tools/testing/selftests/bpf/test_lirc_mode2.sh b/tools/testing/selftests/bpf/test_lirc_mode2.sh new file mode 100755 index 000000000000..ce2e15e4f976 --- /dev/null +++ b/tools/testing/selftests/bpf/test_lirc_mode2.sh @@ -0,0 +1,28 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +GREEN='\033[0;92m' +RED='\033[0;31m' +NC='\033[0m' # No Color + +modprobe rc-loopback + +for i in /sys/class/rc/rc* +do + if grep -q DRV_NAME=rc-loopback $i/uevent + then + LIRCDEV=$(grep DEVNAME= $i/lirc*/uevent | sed sQDEVNAME=Q/dev/Q) + fi +done + +if [ -n $LIRCDEV ]; +then + TYPE=lirc_mode2 + ./test_lirc_mode2_user $LIRCDEV + ret=$? + if [ $ret -ne 0 ]; then + echo -e ${RED}"FAIL: $TYPE"${NC} + else + echo -e ${GREEN}"PASS: $TYPE"${NC} + fi +fi diff --git a/tools/testing/selftests/bpf/test_lirc_mode2_kern.c b/tools/testing/selftests/bpf/test_lirc_mode2_kern.c new file mode 100644 index 000000000000..ba26855563a5 --- /dev/null +++ b/tools/testing/selftests/bpf/test_lirc_mode2_kern.c @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0 +// test ir decoder +// +// Copyright (C) 2018 Sean Young + +#include +#include +#include "bpf_helpers.h" + +SEC("lirc_mode2") +int bpf_decoder(unsigned int *sample) +{ + if (LIRC_IS_PULSE(*sample)) { + unsigned int duration = LIRC_VALUE(*sample); + + if (duration & 0x10000) + bpf_rc_keydown(sample, 0x40, duration & 0xffff, 0); + } + + return 0; +} + +char _license[] SEC("license") = "GPL"; diff --git a/tools/testing/selftests/bpf/test_lirc_mode2_user.c b/tools/testing/selftests/bpf/test_lirc_mode2_user.c new file mode 100644 index 000000000000..d470d63c33db --- /dev/null +++ b/tools/testing/selftests/bpf/test_lirc_mode2_user.c @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0 +// test ir decoder +// +// Copyright (C) 2018 Sean Young + +// A lirc chardev is a device representing a consumer IR (cir) device which +// can receive infrared signals from remote control and/or transmit IR. +// +// IR is sent as a series of pulses and space somewhat like morse code. The +// BPF program can decode this into scancodes so that rc-core can translate +// this into input key codes using the rc keymap. +// +// This test works by sending IR over rc-loopback, so the IR is processed by +// BPF and then decoded into scancodes. The lirc chardev must be the one +// associated with rc-loopback, see the output of ir-keytable(1). +// +// The following CONFIG options must be enabled for the test to succeed: +// CONFIG_RC_CORE=y +// CONFIG_BPF_RAWIR_EVENT=y +// CONFIG_RC_LOOPBACK=y + +// Steps: +// 1. Open the /dev/lircN device for rc-loopback (given on command line) +// 2. Attach bpf_lirc_mode2 program which decodes some IR. +// 3. Send some IR to the same IR device; since it is loopback, this will +// end up in the bpf program +// 4. bpf program should decode IR and report keycode +// 5. We can read keycode from same /dev/lirc device + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "bpf_util.h" +#include +#include + +int main(int argc, char **argv) +{ + struct bpf_object *obj; + int ret, lircfd, progfd, mode; + int testir = 0x1dead; + u32 prog_ids[10], prog_flags[10], prog_cnt; + + if (argc != 2) { + printf("Usage: %s /dev/lircN\n", argv[0]); + return 2; + } + + ret = bpf_prog_load("test_lirc_mode2_kern.o", + BPF_PROG_TYPE_LIRC_MODE2, &obj, &progfd); + if (ret) { + printf("Failed to load bpf program\n"); + return 1; + } + + lircfd = open(argv[1], O_RDWR | O_NONBLOCK); + if (lircfd == -1) { + printf("failed to open lirc device %s: %m\n", argv[1]); + return 1; + } + + /* Let's try detach it before it was ever attached */ + ret = bpf_prog_detach2(progfd, lircfd, BPF_LIRC_MODE2); + if (ret != -1 || errno != ENOENT) { + printf("bpf_prog_detach2 not attached should fail: %m\n"); + return 1; + } + + mode = LIRC_MODE_SCANCODE; + if (ioctl(lircfd, LIRC_SET_REC_MODE, &mode)) { + printf("failed to set rec mode: %m\n"); + return 1; + } + + prog_cnt = 10; + ret = bpf_prog_query(lircfd, BPF_LIRC_MODE2, 0, prog_flags, prog_ids, + &prog_cnt); + if (ret) { + printf("Failed to query bpf programs on lirc device: %m\n"); + return 1; + } + + if (prog_cnt != 0) { + printf("Expected nothing to be attached\n"); + return 1; + } + + ret = bpf_prog_attach(progfd, lircfd, BPF_LIRC_MODE2, 0); + if (ret) { + printf("Failed to attach bpf to lirc device: %m\n"); + return 1; + } + + /* Write raw IR */ + ret = write(lircfd, &testir, sizeof(testir)); + if (ret != sizeof(testir)) { + printf("Failed to send test IR message: %m\n"); + return 1; + } + + struct pollfd pfd = { .fd = lircfd, .events = POLLIN }; + struct lirc_scancode lsc; + + poll(&pfd, 1, 100); + + /* Read decoded IR */ + ret = read(lircfd, &lsc, sizeof(lsc)); + if (ret != sizeof(lsc)) { + printf("Failed to read decoded IR: %m\n"); + return 1; + } + + if (lsc.scancode != 0xdead || lsc.rc_proto != 64) { + printf("Incorrect scancode decoded\n"); + return 1; + } + + prog_cnt = 10; + ret = bpf_prog_query(lircfd, BPF_LIRC_MODE2, 0, prog_flags, prog_ids, + &prog_cnt); + if (ret) { + printf("Failed to query bpf programs on lirc device: %m\n"); + return 1; + } + + if (prog_cnt != 1) { + printf("Expected one program to be attached\n"); + return 1; + } + + /* Let's try detaching it now it is actually attached */ + ret = bpf_prog_detach2(progfd, lircfd, BPF_LIRC_MODE2); + if (ret) { + printf("bpf_prog_detach2: returned %m\n"); + return 1; + } + + return 0; +} -- GitLab