diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h index aa482841270befd1082d3ae3931b5214d4120139..b520c4b5678a2480b8e454b25b7f3b9034c84dae 100644 --- a/arch/arm/mach-davinci/include/mach/nand.h +++ b/arch/arm/mach-davinci/include/mach/nand.h @@ -68,10 +68,14 @@ struct davinci_nand_pdata { /* platform_data */ /* none == NAND_ECC_NONE (strongly *not* advised!!) * soft == NAND_ECC_SOFT - * 1-bit == NAND_ECC_HW - * 4-bit == NAND_ECC_HW_SYNDROME (not on all chips) + * else == NAND_ECC_HW, according to ecc_bits + * + * All DaVinci-family chips support 1-bit hardware ECC. + * Newer ones also support 4-bit ECC, but are awkward + * using it with large page chips. */ nand_ecc_modes_t ecc_mode; + u8 ecc_bits; /* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */ unsigned options; diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 68b747584bc8ca1b143b204cb7d432fb3970dc31..cb5a05e015314600e39ca8f776ec99c8d353137f 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -44,7 +44,7 @@ * and some flavors of secondary chipselect (e.g. based on A12) as used * with multichip packages. * - * The 1-bit ECC hardware is supported, but not yet the newer 4-bit ECC + * The 1-bit ECC hardware is supported, as well as the newer 4-bit ECC * available on chips like the DM355 and OMAP-L137 and needed with the * more error-prone MLC NAND chips. * @@ -54,11 +54,14 @@ struct davinci_nand_info { struct mtd_info mtd; struct nand_chip chip; + struct nand_ecclayout ecclayout; struct device *dev; struct clk *clk; bool partitioned; + bool is_readmode; + void __iomem *base; void __iomem *vaddr; @@ -73,6 +76,7 @@ struct davinci_nand_info { }; static DEFINE_SPINLOCK(davinci_nand_lock); +static bool ecc4_busy; #define to_davinci_nand(m) container_of(m, struct davinci_nand_info, mtd) @@ -217,6 +221,192 @@ static int nand_davinci_correct_1bit(struct mtd_info *mtd, u_char *dat, /*----------------------------------------------------------------------*/ +/* + * 4-bit hardware ECC ... context maintained over entire AEMIF + * + * This is a syndrome engine, but we avoid NAND_ECC_HW_SYNDROME + * since that forces use of a problematic "infix OOB" layout. + * Among other things, it trashes manufacturer bad block markers. + * Also, and specific to this hardware, it ECC-protects the "prepad" + * in the OOB ... while having ECC protection for parts of OOB would + * seem useful, the current MTD stack sometimes wants to update the + * OOB without recomputing ECC. + */ + +static void nand_davinci_hwctl_4bit(struct mtd_info *mtd, int mode) +{ + struct davinci_nand_info *info = to_davinci_nand(mtd); + unsigned long flags; + u32 val; + + spin_lock_irqsave(&davinci_nand_lock, flags); + + /* Start 4-bit ECC calculation for read/write */ + val = davinci_nand_readl(info, NANDFCR_OFFSET); + val &= ~(0x03 << 4); + val |= (info->core_chipsel << 4) | BIT(12); + davinci_nand_writel(info, NANDFCR_OFFSET, val); + + info->is_readmode = (mode == NAND_ECC_READ); + + spin_unlock_irqrestore(&davinci_nand_lock, flags); +} + +/* Read raw ECC code after writing to NAND. */ +static void +nand_davinci_readecc_4bit(struct davinci_nand_info *info, u32 code[4]) +{ + const u32 mask = 0x03ff03ff; + + code[0] = davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET) & mask; + code[1] = davinci_nand_readl(info, NAND_4BIT_ECC2_OFFSET) & mask; + code[2] = davinci_nand_readl(info, NAND_4BIT_ECC3_OFFSET) & mask; + code[3] = davinci_nand_readl(info, NAND_4BIT_ECC4_OFFSET) & mask; +} + +/* Terminate read ECC; or return ECC (as bytes) of data written to NAND. */ +static int nand_davinci_calculate_4bit(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_code) +{ + struct davinci_nand_info *info = to_davinci_nand(mtd); + u32 raw_ecc[4], *p; + unsigned i; + + /* After a read, terminate ECC calculation by a dummy read + * of some 4-bit ECC register. ECC covers everything that + * was read; correct() just uses the hardware state, so + * ecc_code is not needed. + */ + if (info->is_readmode) { + davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET); + return 0; + } + + /* Pack eight raw 10-bit ecc values into ten bytes, making + * two passes which each convert four values (in upper and + * lower halves of two 32-bit words) into five bytes. The + * ROM boot loader uses this same packing scheme. + */ + nand_davinci_readecc_4bit(info, raw_ecc); + for (i = 0, p = raw_ecc; i < 2; i++, p += 2) { + *ecc_code++ = p[0] & 0xff; + *ecc_code++ = ((p[0] >> 8) & 0x03) | ((p[0] >> 14) & 0xfc); + *ecc_code++ = ((p[0] >> 22) & 0x0f) | ((p[1] << 4) & 0xf0); + *ecc_code++ = ((p[1] >> 4) & 0x3f) | ((p[1] >> 10) & 0xc0); + *ecc_code++ = (p[1] >> 18) & 0xff; + } + + return 0; +} + +/* Correct up to 4 bits in data we just read, using state left in the + * hardware plus the ecc_code computed when it was first written. + */ +static int nand_davinci_correct_4bit(struct mtd_info *mtd, + u_char *data, u_char *ecc_code, u_char *null) +{ + int i; + struct davinci_nand_info *info = to_davinci_nand(mtd); + unsigned short ecc10[8]; + unsigned short *ecc16; + u32 syndrome[4]; + unsigned num_errors, corrected; + + /* All bytes 0xff? It's an erased page; ignore its ECC. */ + for (i = 0; i < 10; i++) { + if (ecc_code[i] != 0xff) + goto compare; + } + return 0; + +compare: + /* Unpack ten bytes into eight 10 bit values. We know we're + * little-endian, and use type punning for less shifting/masking. + */ + if (WARN_ON(0x01 & (unsigned) ecc_code)) + return -EINVAL; + ecc16 = (unsigned short *)ecc_code; + + ecc10[0] = (ecc16[0] >> 0) & 0x3ff; + ecc10[1] = ((ecc16[0] >> 10) & 0x3f) | ((ecc16[1] << 6) & 0x3c0); + ecc10[2] = (ecc16[1] >> 4) & 0x3ff; + ecc10[3] = ((ecc16[1] >> 14) & 0x3) | ((ecc16[2] << 2) & 0x3fc); + ecc10[4] = (ecc16[2] >> 8) | ((ecc16[3] << 8) & 0x300); + ecc10[5] = (ecc16[3] >> 2) & 0x3ff; + ecc10[6] = ((ecc16[3] >> 12) & 0xf) | ((ecc16[4] << 4) & 0x3f0); + ecc10[7] = (ecc16[4] >> 6) & 0x3ff; + + /* Tell ECC controller about the expected ECC codes. */ + for (i = 7; i >= 0; i--) + davinci_nand_writel(info, NAND_4BIT_ECC_LOAD_OFFSET, ecc10[i]); + + /* Allow time for syndrome calculation ... then read it. + * A syndrome of all zeroes 0 means no detected errors. + */ + davinci_nand_readl(info, NANDFSR_OFFSET); + nand_davinci_readecc_4bit(info, syndrome); + if (!(syndrome[0] | syndrome[1] | syndrome[2] | syndrome[3])) + return 0; + + /* Start address calculation, and wait for it to complete. + * We _could_ start reading more data while this is working, + * to speed up the overall page read. + */ + davinci_nand_writel(info, NANDFCR_OFFSET, + davinci_nand_readl(info, NANDFCR_OFFSET) | BIT(13)); + for (;;) { + u32 fsr = davinci_nand_readl(info, NANDFSR_OFFSET); + + switch ((fsr >> 8) & 0x0f) { + case 0: /* no error, should not happen */ + return 0; + case 1: /* five or more errors detected */ + return -EIO; + case 2: /* error addresses computed */ + case 3: + num_errors = 1 + ((fsr >> 16) & 0x03); + goto correct; + default: /* still working on it */ + cpu_relax(); + continue; + } + } + +correct: + /* correct each error */ + for (i = 0, corrected = 0; i < num_errors; i++) { + int error_address, error_value; + + if (i > 1) { + error_address = davinci_nand_readl(info, + NAND_ERR_ADD2_OFFSET); + error_value = davinci_nand_readl(info, + NAND_ERR_ERRVAL2_OFFSET); + } else { + error_address = davinci_nand_readl(info, + NAND_ERR_ADD1_OFFSET); + error_value = davinci_nand_readl(info, + NAND_ERR_ERRVAL1_OFFSET); + } + + if (i & 1) { + error_address >>= 16; + error_value >>= 16; + } + error_address &= 0x3ff; + error_address = (512 + 7) - error_address; + + if (error_address < 512) { + data[error_address] ^= error_value; + corrected++; + } + } + + return corrected; +} + +/*----------------------------------------------------------------------*/ + /* * NOTE: NAND boot requires ALE == EM_A[1], CLE == EM_A[2], so that's * how these chips are normally wired. This translates to both 8 and 16 @@ -294,6 +484,23 @@ static void __init nand_dm6446evm_flash_init(struct davinci_nand_info *info) /*----------------------------------------------------------------------*/ +/* An ECC layout for using 4-bit ECC with small-page flash, storing + * ten ECC bytes plus the manufacturer's bad block marker byte, and + * and not overlapping the default BBT markers. + */ +static struct nand_ecclayout hwecc4_small __initconst = { + .eccbytes = 10, + .eccpos = { 0, 1, 2, 3, 4, + /* offset 5 holds the badblock marker */ + 6, 7, + 13, 14, 15, }, + .oobfree = { + {.offset = 8, .length = 5, }, + {.offset = 16, }, + }, +}; + + static int __init nand_davinci_probe(struct platform_device *pdev) { struct davinci_nand_pdata *pdata = pdev->dev.platform_data; @@ -378,24 +585,41 @@ static int __init nand_davinci_probe(struct platform_device *pdev) /* Use board-specific ECC config */ ecc_mode = pdata->ecc_mode; + ret = -EINVAL; switch (ecc_mode) { case NAND_ECC_NONE: case NAND_ECC_SOFT: + pdata->ecc_bits = 0; break; case NAND_ECC_HW: - info->chip.ecc.calculate = nand_davinci_calculate_1bit; - info->chip.ecc.correct = nand_davinci_correct_1bit; - info->chip.ecc.hwctl = nand_davinci_hwctl_1bit; + if (pdata->ecc_bits == 4) { + /* No sanity checks: CPUs must support this, + * and the chips may not use NAND_BUSWIDTH_16. + */ + + /* No sharing 4-bit hardware between chipselects yet */ + spin_lock_irq(&davinci_nand_lock); + if (ecc4_busy) + ret = -EBUSY; + else + ecc4_busy = true; + spin_unlock_irq(&davinci_nand_lock); + + if (ret == -EBUSY) + goto err_ecc; + + info->chip.ecc.calculate = nand_davinci_calculate_4bit; + info->chip.ecc.correct = nand_davinci_correct_4bit; + info->chip.ecc.hwctl = nand_davinci_hwctl_4bit; + info->chip.ecc.bytes = 10; + } else { + info->chip.ecc.calculate = nand_davinci_calculate_1bit; + info->chip.ecc.correct = nand_davinci_correct_1bit; + info->chip.ecc.hwctl = nand_davinci_hwctl_1bit; + info->chip.ecc.bytes = 3; + } info->chip.ecc.size = 512; - info->chip.ecc.bytes = 3; break; - case NAND_ECC_HW_SYNDROME: - /* FIXME implement */ - info->chip.ecc.size = 512; - info->chip.ecc.bytes = 10; - - dev_warn(&pdev->dev, "4-bit ECC nyet supported\n"); - /* FALL THROUGH */ default: ret = -EINVAL; goto err_ecc; @@ -435,12 +659,56 @@ static int __init nand_davinci_probe(struct platform_device *pdev) spin_unlock_irq(&davinci_nand_lock); /* Scan to find existence of the device(s) */ - ret = nand_scan(&info->mtd, pdata->mask_chipsel ? 2 : 1); + ret = nand_scan_ident(&info->mtd, pdata->mask_chipsel ? 2 : 1); if (ret < 0) { dev_dbg(&pdev->dev, "no NAND chip(s) found\n"); goto err_scan; } + /* Update ECC layout if needed ... for 1-bit HW ECC, the default + * is OK, but it allocates 6 bytes when only 3 are needed (for + * each 512 bytes). For the 4-bit HW ECC, that default is not + * usable: 10 bytes are needed, not 6. + */ + if (pdata->ecc_bits == 4) { + int chunks = info->mtd.writesize / 512; + + if (!chunks || info->mtd.oobsize < 16) { + dev_dbg(&pdev->dev, "too small\n"); + ret = -EINVAL; + goto err_scan; + } + + /* For small page chips, preserve the manufacturer's + * badblock marking data ... and make sure a flash BBT + * table marker fits in the free bytes. + */ + if (chunks == 1) { + info->ecclayout = hwecc4_small; + info->ecclayout.oobfree[1].length = + info->mtd.oobsize - 16; + goto syndrome_done; + } + + /* For large page chips we'll be wanting to use a + * not-yet-implemented mode that reads OOB data + * before reading the body of the page, to avoid + * the "infix OOB" model of NAND_ECC_HW_SYNDROME + * (and preserve manufacturer badblock markings). + */ + dev_warn(&pdev->dev, "no 4-bit ECC support yet " + "for large page NAND\n"); + ret = -EIO; + goto err_scan; + +syndrome_done: + info->chip.ecc.layout = &info->ecclayout; + } + + ret = nand_scan_tail(&info->mtd); + if (ret < 0) + goto err_scan; + if (mtd_has_partitions()) { struct mtd_partition *mtd_parts = NULL; int mtd_parts_nb = 0; @@ -503,6 +771,11 @@ static int __init nand_davinci_probe(struct platform_device *pdev) err_clk_enable: clk_put(info->clk); + spin_lock_irq(&davinci_nand_lock); + if (ecc_mode == NAND_ECC_HW_SYNDROME) + ecc4_busy = false; + spin_unlock_irq(&davinci_nand_lock); + err_ecc: err_clk: err_ioremap: @@ -526,6 +799,11 @@ static int __exit nand_davinci_remove(struct platform_device *pdev) else status = del_mtd_device(&info->mtd); + spin_lock_irq(&davinci_nand_lock); + if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME) + ecc4_busy = false; + spin_unlock_irq(&davinci_nand_lock); + iounmap(info->base); iounmap(info->vaddr);