Merge tag 'drm-vc4-fixes-2016-03-03' of github.com:anholt/linux into drm-next

This pull request fixes the major VC4 HDMI modesetting bugs found when
the first wave of users showed up in Raspbian.

* tag 'drm-vc4-fixes-2016-03-03' of github.com:anholt/linux:
  drm/vc4: Initialize scaler DISPBKGND on modeset.
  drm/vc4: Fix setting of vertical timings in the CRTC.
  drm/vc4: Fix the name of the VSYNCD_EVEN register.
  drm/vc4: Add another reg to HDMI debug dumping.
  drm/vc4: Bring HDMI up from power off if necessary.
  drm/vc4: Fix a framebuffer reference leak on async flip interrupt.

drivers/gpu/drm/vc4/vc4_crtc.c

@@ -88,7 +88,7 @@ static const struct {
 } crtc_regs[] = {
 	CRTC_REG(PV_CONTROL),
 	CRTC_REG(PV_V_CONTROL),
-	CRTC_REG(PV_VSYNCD),
+	CRTC_REG(PV_VSYNCD_EVEN),
 	CRTC_REG(PV_HORZA),
 	CRTC_REG(PV_HORZB),
 	CRTC_REG(PV_VERTA),
@@ -188,6 +188,8 @@ static int vc4_get_clock_select(struct drm_crtc *crtc)
 
 static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
 {
+	struct drm_device *dev = crtc->dev;
+	struct vc4_dev *vc4 = to_vc4_dev(dev);
 	struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
 	struct drm_crtc_state *state = crtc->state;
 	struct drm_display_mode *mode = &state->adjusted_mode;
@@ -217,6 +219,16 @@ static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
 				 PV_HORZB_HFP) |
 		   VC4_SET_FIELD(mode->hdisplay, PV_HORZB_HACTIVE));
 
+	CRTC_WRITE(PV_VERTA,
+		   VC4_SET_FIELD(mode->vtotal - mode->vsync_end,
+				 PV_VERTA_VBP) |
+		   VC4_SET_FIELD(mode->vsync_end - mode->vsync_start,
+				 PV_VERTA_VSYNC));
+	CRTC_WRITE(PV_VERTB,
+		   VC4_SET_FIELD(mode->vsync_start - mode->vdisplay,
+				 PV_VERTB_VFP) |
+		   VC4_SET_FIELD(vactive, PV_VERTB_VACTIVE));
+
 	if (interlace) {
 		CRTC_WRITE(PV_VERTA_EVEN,
 			   VC4_SET_FIELD(mode->vtotal - mode->vsync_end - 1,
@@ -246,6 +258,10 @@ static void vc4_crtc_mode_set_nofb(struct drm_crtc *crtc)
 		   PV_CONTROL_FIFO_CLR |
 		   PV_CONTROL_EN);
 
+	HVS_WRITE(SCALER_DISPBKGNDX(vc4_crtc->channel),
+		  SCALER_DISPBKGND_AUTOHS |
+		  (interlace ? SCALER_DISPBKGND_INTERLACE : 0));
+
 	if (debug_dump_regs) {
 		DRM_INFO("CRTC %d regs after:\n", drm_crtc_index(crtc));
 		vc4_crtc_dump_regs(vc4_crtc);
@@ -527,6 +543,7 @@ static int vc4_async_page_flip(struct drm_crtc *crtc,
 	/* Make sure all other async modesetes have landed. */
 	ret = down_interruptible(&vc4->async_modeset);
 	if (ret) {
+		drm_framebuffer_unreference(fb);
 		kfree(flip_state);
 		return ret;
 	}

drivers/gpu/drm/vc4/vc4_hdmi.c

@@ -95,6 +95,7 @@ static const struct {
 	HDMI_REG(VC4_HDMI_SW_RESET_CONTROL),
 	HDMI_REG(VC4_HDMI_HOTPLUG_INT),
 	HDMI_REG(VC4_HDMI_HOTPLUG),
+	HDMI_REG(VC4_HDMI_RAM_PACKET_CONFIG),
 	HDMI_REG(VC4_HDMI_HORZA),
 	HDMI_REG(VC4_HDMI_HORZB),
 	HDMI_REG(VC4_HDMI_FIFO_CTL),
@@ -495,6 +496,16 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 		goto err_put_i2c;
 	}
 
+	/* This is the rate that is set by the firmware.  The number
+	 * needs to be a bit higher than the pixel clock rate
+	 * (generally 148.5Mhz).
+	 */
+	ret = clk_set_rate(hdmi->hsm_clock, 163682864);
+	if (ret) {
+		DRM_ERROR("Failed to set HSM clock rate: %d\n", ret);
+		goto err_unprepare_pix;
+	}
+
 	ret = clk_prepare_enable(hdmi->hsm_clock);
 	if (ret) {
 		DRM_ERROR("Failed to turn on HDMI state machine clock: %d\n",
@@ -516,7 +527,24 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 	vc4->hdmi = hdmi;
 
 	/* HDMI core must be enabled. */
-	WARN_ON_ONCE((HD_READ(VC4_HD_M_CTL) & VC4_HD_M_ENABLE) == 0);
+	if (!(HD_READ(VC4_HD_M_CTL) & VC4_HD_M_ENABLE)) {
+		HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_SW_RST);
+		udelay(1);
+		HD_WRITE(VC4_HD_M_CTL, 0);
+
+		HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_ENABLE);
+
+		HDMI_WRITE(VC4_HDMI_SW_RESET_CONTROL,
+			   VC4_HDMI_SW_RESET_HDMI |
+			   VC4_HDMI_SW_RESET_FORMAT_DETECT);
+
+		HDMI_WRITE(VC4_HDMI_SW_RESET_CONTROL, 0);
+
+		/* PHY should be in reset, like
+		 * vc4_hdmi_encoder_disable() does.
+		 */
+		HDMI_WRITE(VC4_HDMI_TX_PHY_RESET_CTL, 0xf << 16);
+	}
 
 	drm_encoder_init(drm, hdmi->encoder, &vc4_hdmi_encoder_funcs,
 			 DRM_MODE_ENCODER_TMDS, NULL);

drivers/gpu/drm/vc4/vc4_regs.h

@@ -187,7 +187,7 @@
 # define PV_VCONTROL_CONTINUOUS			BIT(1)
 # define PV_VCONTROL_VIDEN			BIT(0)
 
-#define PV_VSYNCD				0x08
+#define PV_VSYNCD_EVEN				0x08
 
 #define PV_HORZA				0x0c
 # define PV_HORZA_HBP_MASK			VC4_MASK(31, 16)
@@ -350,6 +350,17 @@
 # define SCALER_DISPCTRLX_HEIGHT_SHIFT		0
 
 #define SCALER_DISPBKGND0                       0x00000044
+# define SCALER_DISPBKGND_AUTOHS		BIT(31)
+# define SCALER_DISPBKGND_INTERLACE		BIT(30)
+# define SCALER_DISPBKGND_GAMMA			BIT(29)
+# define SCALER_DISPBKGND_TESTMODE_MASK		VC4_MASK(28, 25)
+# define SCALER_DISPBKGND_TESTMODE_SHIFT	25
+/* Enables filling the scaler line with the RGB value in the low 24
+ * bits before compositing.  Costs cycles, so should be skipped if
+ * opaque display planes will cover everything.
+ */
+# define SCALER_DISPBKGND_FILL			BIT(24)
+
 #define SCALER_DISPSTAT0                        0x00000048
 #define SCALER_DISPBASE0                        0x0000004c
 # define SCALER_DISPSTATX_MODE_MASK		VC4_MASK(31, 30)
@@ -362,6 +373,9 @@
 # define SCALER_DISPSTATX_EMPTY			BIT(28)
 #define SCALER_DISPCTRL1                        0x00000050
 #define SCALER_DISPBKGND1                       0x00000054
+#define SCALER_DISPBKGNDX(x)			(SCALER_DISPBKGND0 +        \
+						 (x) * (SCALER_DISPBKGND1 - \
+							SCALER_DISPBKGND0))
 #define SCALER_DISPSTAT1                        0x00000058
 #define SCALER_DISPSTATX(x)			(SCALER_DISPSTAT0 +        \
 						 (x) * (SCALER_DISPSTAT1 - \
@@ -456,6 +470,8 @@
 #define VC4_HDMI_TX_PHY_RESET_CTL		0x2c0
 
 #define VC4_HD_M_CTL				0x00c
+# define VC4_HD_M_REGISTER_FILE_STANDBY		(3 << 6)
+# define VC4_HD_M_RAM_STANDBY			(3 << 4)
 # define VC4_HD_M_SW_RST			BIT(2)
 # define VC4_HD_M_ENABLE			BIT(0)