arm64: dts: ti: k3-*: Fix whitespace around flash@0 nodes

The OSPI flash nodes are missing a space before the opening brace. Fix
that.
Signed-off-by: NPratyush Yadav <p.yadav@ti.com>
Signed-off-by: NNishanth Menon <nm@ti.com>
Reviewed-by: Apurva Nandan<a-nandan@ti.com>
Link: https://lore.kernel.org/r/20220217181025.1815118-1-p.yadav@ti.com

arch/arm64/boot/dts/ti/k3-am642-evm.dts

@@ -498,7 +498,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
 
-	flash@0{
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <8>;

arch/arm64/boot/dts/ti/k3-am642-sk.dts

@@ -369,7 +369,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
 
-	flash@0{
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <8>;

arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi

@@ -256,7 +256,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
 
-	flash@0{
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <8>;

arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts

@@ -482,7 +482,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
 
-	flash@0{
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <1>;

arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi

@@ -171,7 +171,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
 
-	flash@0{
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <8>;