diff --git a/CREDITS b/CREDITS index cb02b9923a5261769e0b8f1b92713575c480b3ac..8592e45e3932022b27eac6c09a79aeb85a967fc1 100644 --- a/CREDITS +++ b/CREDITS @@ -1910,6 +1910,15 @@ S: 660 Harvard Ave. #7 S: Santa Clara, CA 95051 S: USA +N: Kukjin Kim +E: kgene@kernel.org +D: Samsung S3C, S5P and Exynos ARM architectures + +N: Sangbeom Kim +E: sbkim73@samsung.com +D: Samsung SoC Audio (ASoC) drivers +D: Samsung PMIC (RTC, regulators, MFD) drivers + N: Russell King E: rmk@arm.linux.org.uk D: Linux/arm integrator, maintainer & hacker diff --git a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml index 6ebcbc15369181988c02e4bee352b43d3162863b..b66a07e21d1e5de756438bc5f690459aa00a00c1 100644 --- a/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml +++ b/Documentation/devicetree/bindings/sram/allwinner,sun4i-a10-system-control.yaml @@ -33,6 +33,9 @@ properties: - const: allwinner,sun4i-a10-system-control - const: allwinner,sun8i-a23-system-control - const: allwinner,sun8i-h3-system-control + - items: + - const: allwinner,sun8i-v3s-system-control + - const: allwinner,sun8i-h3-system-control - items: - const: allwinner,sun8i-r40-system-control - const: allwinner,sun4i-a10-system-control diff --git a/MAINTAINERS b/MAINTAINERS index e73636b75f29de8644c5c260b60f029e36df635a..608fc8484c02fc0c32c843912e1d8a988d7bd02c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2375,7 +2375,6 @@ F: sound/soc/rockchip/ N: rockchip ARM/SAMSUNG EXYNOS ARM ARCHITECTURES -M: Kukjin Kim <kgene@kernel.org> M: Krzysztof Kozlowski <krzk@kernel.org> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-samsung-soc@vger.kernel.org @@ -2642,10 +2641,8 @@ F: drivers/pinctrl/visconti/ N: visconti ARM/UNIPHIER ARCHITECTURE -M: Masahiro Yamada <yamada.masahiro@socionext.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained -T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git +S: Orphan F: Documentation/devicetree/bindings/arm/socionext/uniphier.yaml F: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml F: Documentation/devicetree/bindings/pinctrl/socionext,uniphier-pinctrl.yaml @@ -5006,9 +5003,8 @@ T: git git://linuxtv.org/media_tree.git F: drivers/media/platform/sti/delta DENALI NAND DRIVER -M: Masahiro Yamada <yamada.masahiro@socionext.com> L: linux-mtd@lists.infradead.org -S: Supported +S: Orphan F: drivers/mtd/nand/raw/denali* DESIGNWARE EDMA CORE IP DRIVER @@ -15372,7 +15368,6 @@ F: security/safesetid/ SAMSUNG AUDIO (ASoC) DRIVERS M: Krzysztof Kozlowski <krzk@kernel.org> -M: Sangbeom Kim <sbkim73@samsung.com> M: Sylwester Nawrocki <s.nawrocki@samsung.com> L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Supported @@ -15407,7 +15402,6 @@ S: Maintained F: drivers/platform/x86/samsung-laptop.c SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS -M: Sangbeom Kim <sbkim73@samsung.com> M: Krzysztof Kozlowski <krzk@kernel.org> M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> L: linux-kernel@vger.kernel.org @@ -15489,7 +15483,6 @@ F: include/linux/clk/samsung.h F: include/linux/platform_data/clk-s3c2410.h SAMSUNG SPI DRIVERS -M: Kukjin Kim <kgene@kernel.org> M: Krzysztof Kozlowski <krzk@kernel.org> M: Andi Shyti <andi@etezian.org> L: linux-spi@vger.kernel.org diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts index f1a41152e9dd70d57beaa6eed9608433cf64b25e..adde62d6fce73b99e9f088fd61916a5e4833f910 100644 --- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts +++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts @@ -227,12 +227,12 @@ /delete-property/ #size-cells; spi-slave; status = "okay"; - ready-gpio = <&gpio 125 GPIO_ACTIVE_HIGH>; + ready-gpios = <&gpio 125 GPIO_ACTIVE_HIGH>; slave { compatible = "olpc,xo1.75-ec"; spi-cpha; - cmd-gpio = <&gpio 155 GPIO_ACTIVE_HIGH>; + cmd-gpios = <&gpio 155 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi index cc4efd0efabd2664cd0fb7afc6232a981dff5f0f..4ae630d37d094fd47505c1f26a142a70bbba28ca 100644 --- a/arch/arm/boot/dts/mmp3.dtsi +++ b/arch/arm/boot/dts/mmp3.dtsi @@ -296,6 +296,7 @@ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&soc_clocks MMP2_CLK_CCIC0>; clock-names = "axi"; + power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>; #clock-cells = <0>; clock-output-names = "mclk"; status = "disabled"; @@ -307,6 +308,7 @@ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&soc_clocks MMP2_CLK_CCIC1>; clock-names = "axi"; + power-domains = <&soc_clocks MMP3_POWER_DOMAIN_CAMERA>; #clock-cells = <0>; clock-output-names = "mclk"; status = "disabled"; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index ca109dc182388dfd193d9505d556ce77c5aec940..2e77ccec3fc16553d813b0d925841a98945cc82a 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -89,6 +89,14 @@ states = <1800000 0x1>, <2900000 0x0>; }; + + vin: vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -150,11 +158,18 @@ regulators { compatible = "st,stpmic1-regulators"; + buck1-supply = <&vin>; + buck2-supply = <&vin>; + buck3-supply = <&vin>; + buck4-supply = <&vin>; ldo1-supply = <&v3v3>; ldo2-supply = <&v3v3>; ldo3-supply = <&vdd_ddr>; + ldo4-supply = <&vin>; ldo5-supply = <&v3v3>; ldo6-supply = <&v3v3>; + vref_ddr-supply = <&vin>; + boost-supply = <&vin>; pwr_sw1-supply = <&bst_out>; pwr_sw2-supply = <&bst_out>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi index a5307745719a02fc2b78bc7302fe57dfe930d23c..93398cfae97ee41d10bddf0d4dc7cc7d3ea05ca2 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi @@ -80,6 +80,14 @@ dais = <&sai2a_port &sai2b_port &i2s2_port>; status = "okay"; }; + + vin: vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; }; &adc { @@ -240,9 +248,18 @@ regulators { compatible = "st,stpmic1-regulators"; + buck1-supply = <&vin>; + buck2-supply = <&vin>; + buck3-supply = <&vin>; + buck4-supply = <&vin>; ldo1-supply = <&v3v3>; + ldo2-supply = <&vin>; ldo3-supply = <&vdd_ddr>; + ldo4-supply = <&vin>; + ldo5-supply = <&vin>; ldo6-supply = <&v3v3>; + vref_ddr-supply = <&vin>; + boost-supply = <&vin>; pwr_sw1-supply = <&bst_out>; pwr_sw2-supply = <&bst_out>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 0f95a6ef8543a77513cabf78c131d8afa3589565..1c5a666c54b533245f03844a2ca3cd03d8cd055f 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -143,7 +143,7 @@ trips { cpu_alert0: cpu-alert0 { /* milliCelsius */ - temperature = <850000>; + temperature = <85000>; hysteresis = <2000>; type = "passive"; }; diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index aeb1209e080463f2f2c69e5c8669d814cd6cf10f..bb70acc6b52648a61d0459786eb940c41b6ec469 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -93,6 +93,7 @@ CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_SPI_SPIDEV=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_MXC=y CONFIG_W1=y CONFIG_W1_MASTER_MXC=y CONFIG_W1_SLAVE_THERM=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 0fa79bd00219140264aea6668157076cfafd3747..221f5c340c8653e40a6be937080669236554180d 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -217,6 +217,7 @@ CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCF857X=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_74X164=y +CONFIG_GPIO_MXC=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_SYSCON=y CONFIG_POWER_RESET_SYSCON_POWEROFF=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 70b709a669d2b681ab29b2ffc875834cd62f7d10..e00be9faa23bfa7e1a28a8b8f8d0bd8ba0c60a2b 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -166,6 +166,7 @@ CONFIG_SPI_IMX=y CONFIG_SPI_ORION=y CONFIG_GPIO_ASPEED=m CONFIG_GPIO_ASPEED_SGPIO=y +CONFIG_GPIO_MXC=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_QNAP=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index e731cdf7c88c4ad177513a4be7ff9290007369c1..a611b0c1e540fcada57f3a20dfdcf90e3fad7e36 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -465,6 +465,7 @@ CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_GPIO_TWL4030=y +CONFIG_GPIO_MXC=y CONFIG_POWER_AVS=y CONFIG_ROCKCHIP_IODOMAIN=y CONFIG_POWER_RESET_AS3722=y diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S index 2d962fe488210d309f050e7387bc7f1812210d3f..a3a64bf972507b3c311844fce4838aaed4446168 100644 --- a/arch/arm/mach-mvebu/coherency_ll.S +++ b/arch/arm/mach-mvebu/coherency_ll.S @@ -35,13 +35,8 @@ ENTRY(ll_get_coherency_base) /* * MMU is disabled, use the physical address of the coherency - * base address. However, if the coherency fabric isn't mapped - * (i.e its virtual address is zero), it means coherency is - * not enabled, so we return 0. + * base address, (or 0x0 if the coherency fabric is not mapped) */ - ldr r1, =coherency_base - cmp r1, #0 - beq 2f adr r1, 3f ldr r3, [r1] ldr r1, [r1, r3] diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 6f2494dd6d60b60b5967ddc121d886d4ff00b253..5c4ac1c9f4e0295183c26a97bb8be42861766a67 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -54,6 +54,7 @@ config ARCH_BCM_IPROC config ARCH_BERLIN bool "Marvell Berlin SoC Family" select DW_APB_ICTL + select DW_APB_TIMER_OF select GPIOLIB select PINCTRL help diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index cb1360ae1211e27b7783eac19ad00244f121e12f..7740f97c240f050455eeb25702a9d0a22c6ff483 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -584,3 +584,9 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb { + status = "okay"; + dr_mode = "otg"; + vbus-supply = <&usb_pwr>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index b9efc8469265d871d244c2cb2a89be88152d0bf2..724ee179b316e23d9540736a8eac7adabc4c807f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -171,6 +171,46 @@ #size-cells = <2>; ranges; + usb: usb@ffe09080 { + compatible = "amlogic,meson-axg-usb-ctrl"; + reg = <0x0 0xffe09080 0x0 0x20>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "usb_ctrl", "ddr"; + resets = <&reset RESET_USB_OTG>; + + dr_mode = "otg"; + + phys = <&usb2_phy1>; + phy-names = "usb2-phy1"; + + dwc2: usb@ff400000 { + compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; + reg = <0x0 0xff400000 0x0 0x40000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB1>; + clock-names = "otg"; + phys = <&usb2_phy1>; + dr_mode = "peripheral"; + g-rx-fifo-size = <192>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 16 16 16>; + }; + + dwc3: usb@ff500000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff500000 0x0 0x100000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk; + }; + }; + ethmac: ethernet@ff3f0000 { compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.70a", @@ -187,6 +227,8 @@ "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; + resets = <&reset RESET_ETHERNET>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -1734,6 +1776,16 @@ clock-names = "core", "clkin0", "clkin1"; resets = <&reset RESET_SD_EMMC_C>; }; + + usb2_phy1: phy@9020 { + compatible = "amlogic,meson-gxl-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0x9020 0x0 0x20>; + clocks = <&clkc CLKID_USB>; + clock-names = "phy"; + resets = <&reset RESET_USB_OTG>; + reset-names = "phy"; + }; }; sram: sram@fffc0000 { diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 1e83ec5b8c91a13018b3fc7a1651eca7f75290f7..8514fe6a275a320d6b58bcc578ad56dd129690e6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -209,7 +209,7 @@ }; ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-axg-dwmac", + compatible = "amlogic,meson-g12a-dwmac", "snps,dwmac-3.70a", "snps,dwmac"; reg = <0x0 0xff3f0000 0x0 0x10000>, @@ -224,6 +224,8 @@ "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; + resets = <&reset RESET_ETHERNET>; + reset-names = "stmmaceth"; status = "disabled"; mdio0: mdio { @@ -282,6 +284,8 @@ hwrng: rng@218 { compatible = "amlogic,meson-rng"; reg = <0x0 0x218 0x0 0x4>; + clocks = <&clkc CLKID_RNG0>; + clock-names = "core"; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts index 5de2815ba99de9627aa7c7954df376c1c74fd9d3..ce1198ad34e425ea9077dea51a263dfd9238b63f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dts @@ -19,7 +19,7 @@ regulator-min-microvolt = <680000>; regulator-max-microvolt = <1040000>; - pwms = <&pwm_AO_cd 1 1500 0>; + pwms = <&pwm_ab 0 1500 0>; }; &vddcpu_b { diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 0edd137151f89eb6ba63695d28abdfaf18cf6434..726b91d3a905a5cfd9a9322654570a2074ff58d0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/meson-gxbb-power.h> +#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> #include <dt-bindings/thermal/thermal.h> / { @@ -575,6 +576,8 @@ interrupt-names = "macirq"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; + resets = <&reset RESET_ETHERNET>; + reset-names = "stmmaceth"; power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts index 03733fd92732d4eeb48bd53facedef2bb012a4e9..215d2f70262332ff95a24ce91b78e030a23a7c73 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -20,17 +20,23 @@ compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7", "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; + + aliases { + /* ethernet1 is wan port */ + ethernet1 = &switch0port3; + ethernet3 = &switch0port1; + }; }; &switch0 { ports { - port@1 { + switch0port1: port@1 { reg = <1>; label = "lan1"; phy-handle = <&switch0phy0>; }; - port@3 { + switch0port3: port@3 { reg = <3>; label = "wan"; phy-handle = <&switch0phy2>; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts index 8570c5f47d7d89d0c39e3162cf23034061d1927e..b6f4af8ebafbb9739edcf69dc021c18be3973320 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts @@ -19,17 +19,23 @@ model = "Globalscale Marvell ESPRESSOBin Board V7"; compatible = "globalscale,espressobin-v7", "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; + + aliases { + /* ethernet1 is wan port */ + ethernet1 = &switch0port3; + ethernet3 = &switch0port1; + }; }; &switch0 { ports { - port@1 { + switch0port1: port@1 { reg = <1>; label = "lan1"; phy-handle = <&switch0phy0>; }; - port@3 { + switch0port3: port@3 { reg = <3>; label = "wan"; phy-handle = <&switch0phy2>; diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi index b97218c727277ac1976c6cf2c8c4eeb8375febd6..0775c16e0ec8062cbf77cc3b4bfc4d7540005592 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dtsi @@ -13,6 +13,10 @@ / { aliases { ethernet0 = ð0; + /* for dsa slave device */ + ethernet1 = &switch0port1; + ethernet2 = &switch0port2; + ethernet3 = &switch0port3; serial0 = &uart0; serial1 = &uart1; }; @@ -120,7 +124,7 @@ #address-cells = <1>; #size-cells = <0>; - port@0 { + switch0port0: port@0 { reg = <0>; label = "cpu"; ethernet = <ð0>; @@ -131,19 +135,19 @@ }; }; - port@1 { + switch0port1: port@1 { reg = <1>; label = "wan"; phy-handle = <&switch0phy0>; }; - port@2 { + switch0port2: port@2 { reg = <2>; label = "lan0"; phy-handle = <&switch0phy1>; }; - port@3 { + switch0port3: port@3 { reg = <3>; label = "lan1"; phy-handle = <&switch0phy2>; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 17a2df6a263e8fc96ce9a959b7e08aa1ba50b8cb..5cfe3cf6f2acb2db8020bbf8821aba0a9c787538 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -500,6 +500,7 @@ CONFIG_GPIO_ALTERA=m CONFIG_GPIO_DWAPB=y CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_MPC8XXX=y +CONFIG_GPIO_MXC=y CONFIG_GPIO_PL061=y CONFIG_GPIO_RCAR=y CONFIG_GPIO_UNIPHIER=y diff --git a/drivers/firmware/arm_scmi/base.c b/drivers/firmware/arm_scmi/base.c index 9853bd3c4d456b490855a36425935b29378427c6..017e5d8bd869a752d14bd7cdf58032e9d8a96787 100644 --- a/drivers/firmware/arm_scmi/base.c +++ b/drivers/firmware/arm_scmi/base.c @@ -197,6 +197,8 @@ static int scmi_base_implementation_list_get(const struct scmi_handle *handle, protocols_imp[tot_num_ret + loop] = *(list + loop); tot_num_ret += loop_num_ret; + + scmi_reset_rx_to_maxsz(handle, t); } while (loop_num_ret); scmi_xfer_put(handle, t); diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c index c1cfe3ee3d55a826ff1f97ca8156873a61c212ca..4645677d86f1b1648bccfb99c9f88a2393a98dff 100644 --- a/drivers/firmware/arm_scmi/clock.c +++ b/drivers/firmware/arm_scmi/clock.c @@ -192,6 +192,8 @@ scmi_clock_describe_rates_get(const struct scmi_handle *handle, u32 clk_id, } tot_rate_cnt += num_returned; + + scmi_reset_rx_to_maxsz(handle, t); /* * check for both returned and remaining to avoid infinite * loop due to buggy firmware diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h index 37fb583f1bf5f9e1362b121ca6eb9796345009fc..65063fa948d412e41b81aff9489bcfd0802fd8e2 100644 --- a/drivers/firmware/arm_scmi/common.h +++ b/drivers/firmware/arm_scmi/common.h @@ -147,6 +147,8 @@ int scmi_do_xfer_with_response(const struct scmi_handle *h, struct scmi_xfer *xfer); int scmi_xfer_get_init(const struct scmi_handle *h, u8 msg_id, u8 prot_id, size_t tx_size, size_t rx_size, struct scmi_xfer **p); +void scmi_reset_rx_to_maxsz(const struct scmi_handle *handle, + struct scmi_xfer *xfer); int scmi_handle_put(const struct scmi_handle *handle); struct scmi_handle *scmi_handle_get(struct device *dev); void scmi_set_handle(struct scmi_device *scmi_dev); diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c index c5dea87edf8f2c61b6be519232434be9a91e6f50..3dfd8b6a0ebf789089c17d87a3348619fbccfc27 100644 --- a/drivers/firmware/arm_scmi/driver.c +++ b/drivers/firmware/arm_scmi/driver.c @@ -402,6 +402,14 @@ int scmi_do_xfer(const struct scmi_handle *handle, struct scmi_xfer *xfer) return ret; } +void scmi_reset_rx_to_maxsz(const struct scmi_handle *handle, + struct scmi_xfer *xfer) +{ + struct scmi_info *info = handle_to_scmi_info(handle); + + xfer->rx.len = info->desc->max_msg_size; +} + #define SCMI_MAX_RESPONSE_TIMEOUT (2 * MSEC_PER_SEC) /** diff --git a/drivers/firmware/arm_scmi/notify.c b/drivers/firmware/arm_scmi/notify.c index 2754f9d01636ae711eb31d8ca3f6f83c5bac02d6..ce336899d6366172487dab71e9c9ca77778f3848 100644 --- a/drivers/firmware/arm_scmi/notify.c +++ b/drivers/firmware/arm_scmi/notify.c @@ -1403,15 +1403,21 @@ static void scmi_protocols_late_init(struct work_struct *work) "finalized PENDING handler - key:%X\n", hndl->key); ret = scmi_event_handler_enable_events(hndl); + if (ret) { + dev_dbg(ni->handle->dev, + "purging INVALID handler - key:%X\n", + hndl->key); + scmi_put_active_handler(ni, hndl); + } } else { ret = scmi_valid_pending_handler(ni, hndl); - } - if (ret) { - dev_dbg(ni->handle->dev, - "purging PENDING handler - key:%X\n", - hndl->key); - /* this hndl can be only a pending one */ - scmi_put_handler_unlocked(ni, hndl); + if (ret) { + dev_dbg(ni->handle->dev, + "purging PENDING handler - key:%X\n", + hndl->key); + /* this hndl can be only a pending one */ + scmi_put_handler_unlocked(ni, hndl); + } } } mutex_unlock(&ni->pending_mtx); @@ -1468,7 +1474,7 @@ int scmi_notification_init(struct scmi_handle *handle) ni->gid = gid; ni->handle = handle; - ni->notify_wq = alloc_workqueue("scmi_notify", + ni->notify_wq = alloc_workqueue(dev_name(handle->dev), WQ_UNBOUND | WQ_FREEZABLE | WQ_SYSFS, 0); if (!ni->notify_wq) diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c index ed475b40bd083a0d20424977cfa223633e1199f0..82fb3babff72133f67997491b30beb8a575d87c2 100644 --- a/drivers/firmware/arm_scmi/perf.c +++ b/drivers/firmware/arm_scmi/perf.c @@ -304,6 +304,8 @@ scmi_perf_describe_levels_get(const struct scmi_handle *handle, u32 domain, } tot_opp_cnt += num_returned; + + scmi_reset_rx_to_maxsz(handle, t); /* * check for both returned and remaining to avoid infinite * loop due to buggy firmware diff --git a/drivers/firmware/arm_scmi/reset.c b/drivers/firmware/arm_scmi/reset.c index f063cfe17e0299b04185b47a070c18a779227a4b..a981a22cfe8912b4ae68bbadc18f275ada8c514f 100644 --- a/drivers/firmware/arm_scmi/reset.c +++ b/drivers/firmware/arm_scmi/reset.c @@ -36,9 +36,7 @@ struct scmi_msg_reset_domain_reset { #define EXPLICIT_RESET_ASSERT BIT(1) #define ASYNCHRONOUS_RESET BIT(2) __le32 reset_state; -#define ARCH_RESET_TYPE BIT(31) -#define COLD_RESET_STATE BIT(0) -#define ARCH_COLD_RESET (ARCH_RESET_TYPE | COLD_RESET_STATE) +#define ARCH_COLD_RESET 0 }; struct scmi_msg_reset_notify { diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c index 9703cf6356a0452c3af99d608c6ba52febd6c901..b4232d611033e5ff83168bf6a20772bbe6801c88 100644 --- a/drivers/firmware/arm_scmi/sensors.c +++ b/drivers/firmware/arm_scmi/sensors.c @@ -166,6 +166,8 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle, } desc_index += num_returned; + + scmi_reset_rx_to_maxsz(handle, t); /* * check for both returned and remaining to avoid infinite * loop due to buggy firmware diff --git a/drivers/firmware/arm_scmi/smc.c b/drivers/firmware/arm_scmi/smc.c index 1a03c3ec02300226384d32ad2d1219e9dade9edf..82a82a5dc86ae0e7554256a33d1e9d1e10909901 100644 --- a/drivers/firmware/arm_scmi/smc.c +++ b/drivers/firmware/arm_scmi/smc.c @@ -149,6 +149,6 @@ static const struct scmi_transport_ops scmi_smc_ops = { const struct scmi_desc scmi_smc_desc = { .ops = &scmi_smc_ops, .max_rx_timeout_ms = 30, - .max_msg = 1, + .max_msg = 20, .max_msg_size = 128, }; diff --git a/drivers/soc/ti/ti_sci_pm_domains.c b/drivers/soc/ti/ti_sci_pm_domains.c index af2126d2b2ff9fbf797b59c14602da94e4a8cc8e..8afb3f45d2637b6749b0f121931ab77a614ffd9d 100644 --- a/drivers/soc/ti/ti_sci_pm_domains.c +++ b/drivers/soc/ti/ti_sci_pm_domains.c @@ -91,7 +91,7 @@ static struct generic_pm_domain *ti_sci_pd_xlate( struct genpd_onecell_data *genpd_data = data; unsigned int idx = genpdspec->args[0]; - if (genpdspec->args_count < 2) + if (genpdspec->args_count != 1 && genpdspec->args_count != 2) return ERR_PTR(-EINVAL); if (idx >= genpd_data->num_domains) { diff --git a/drivers/tee/tee_core.c b/drivers/tee/tee_core.c index f53bf336c0a2025cf49c2ab017b7dfb1c4fce7dc..6ade4a5c4840789829fbd28b7825aad3742d9dc5 100644 --- a/drivers/tee/tee_core.c +++ b/drivers/tee/tee_core.c @@ -200,7 +200,8 @@ int tee_session_calc_client_uuid(uuid_t *uuid, u32 connection_method, int name_len; int rc; - if (connection_method == TEE_IOCTL_LOGIN_PUBLIC) { + if (connection_method == TEE_IOCTL_LOGIN_PUBLIC || + connection_method == TEE_IOCTL_LOGIN_REE_KERNEL) { /* Nil UUID to be passed to TEE environment */ uuid_copy(uuid, &uuid_null); return 0;