ARM: at91: add gpio suspend/resume support when using pinctrl

gpio suspend/resume and wakeup sources where not managed when using pinctrl so
it was impossible to wake up the system with a gpio.
Signed-off-by: NLudovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

arch/arm/mach-at91/include/mach/gpio.h

@@ -209,6 +209,14 @@ extern int at91_get_gpio_value(unsigned pin);
 extern void at91_gpio_suspend(void);
 extern void at91_gpio_resume(void);
 
+#ifdef CONFIG_PINCTRL_AT91
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+#else
+static inline void at91_pinctrl_gpio_suspend(void) {}
+static inline void at91_pinctrl_gpio_resume(void) {}
+#endif
+
 #endif	/* __ASSEMBLY__ */
 
 #endif

arch/arm/mach-at91/pm.c

@@ -201,6 +201,9 @@ extern u32 at91_slow_clock_sz;
 
 static int at91_pm_enter(suspend_state_t state)
 {
+	if (of_have_populated_dt())
+		at91_pinctrl_gpio_suspend();
+	else
 		at91_gpio_suspend();
 	at91_irq_suspend();
 
@@ -286,6 +289,9 @@ static int at91_pm_enter(suspend_state_t state)
 error:
 	target_state = PM_SUSPEND_ON;
 	at91_irq_resume();
+	if (of_have_populated_dt())
+		at91_pinctrl_gpio_resume();
+	else
 		at91_gpio_resume();
 	return 0;
 }

drivers/pinctrl/pinctrl-at91.c

@@ -1277,21 +1277,80 @@ static int alt_gpio_irq_type(struct irq_data *d, unsigned type)
 }
 
 #ifdef CONFIG_PM
+
+static u32 wakeups[MAX_GPIO_BANKS];
+static u32 backups[MAX_GPIO_BANKS];
+
 static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
 {
 	struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
 	unsigned	bank = at91_gpio->pioc_idx;
+	unsigned mask = 1 << d->hwirq;
 
 	if (unlikely(bank >= MAX_GPIO_BANKS))
 		return -EINVAL;
 
+	if (state)
+		wakeups[bank] |= mask;
+	else
+		wakeups[bank] &= ~mask;
+
 	irq_set_irq_wake(at91_gpio->pioc_virq, state);
 
 	return 0;
 }
+
+void at91_pinctrl_gpio_suspend(void)
+{
+	int i;
+
+	for (i = 0; i < gpio_banks; i++) {
+		void __iomem  *pio;
+
+		if (!gpio_chips[i])
+			continue;
+
+		pio = gpio_chips[i]->regbase;
+
+		backups[i] = __raw_readl(pio + PIO_IMR);
+		__raw_writel(backups[i], pio + PIO_IDR);
+		__raw_writel(wakeups[i], pio + PIO_IER);
+
+		if (!wakeups[i]) {
+			clk_unprepare(gpio_chips[i]->clock);
+			clk_disable(gpio_chips[i]->clock);
+		} else {
+			printk(KERN_DEBUG "GPIO-%c may wake for %08x\n",
+			       'A'+i, wakeups[i]);
+		}
+	}
+}
+
+void at91_pinctrl_gpio_resume(void)
+{
+	int i;
+
+	for (i = 0; i < gpio_banks; i++) {
+		void __iomem  *pio;
+
+		if (!gpio_chips[i])
+			continue;
+
+		pio = gpio_chips[i]->regbase;
+
+		if (!wakeups[i]) {
+			if (clk_prepare(gpio_chips[i]->clock) == 0)
+				clk_enable(gpio_chips[i]->clock);
+		}
+
+		__raw_writel(wakeups[i], pio + PIO_IDR);
+		__raw_writel(backups[i], pio + PIO_IER);
+	}
+}
+
 #else
 #define gpio_irq_set_wake	NULL
-#endif
+#endif /* CONFIG_PM */
 
 static struct irq_chip gpio_irqchip = {
 	.name		= "GPIO",