From 61e118dd7755417c541a8ecf32a82c3971258cff Mon Sep 17 00:00:00 2001 From: Enric Balletbo i Serra Date: Fri, 8 Oct 2010 10:22:19 -0700 Subject: [PATCH] omap3: Add external VBUS power switch and overcurrent detect onIGEP v2 board GPIO for various devices are missing from the board initialization. This patch adds support for the VBUS and over current gpios. Without this patch, input/outputs from these two sources are ignored. Signed-off-by: Enric Balletbo i Serra Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-igep0020.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index c437031554b0..2f40d77a2f1e 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -275,6 +275,22 @@ static int igep2_twl_gpio_setup(struct device *dev, igep2_vmmc1_supply.dev = mmc[0].dev; igep2_vmmc2_supply.dev = mmc[1].dev; + /* + * REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + if ((gpio_request(gpio + 1, "GPIO_EHCI_NOC") < 0) || + (gpio_direction_input(gpio + 1) < 0)) + pr_err("IGEP2: Could not obtain gpio for EHCI NOC"); + + /* + * TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN + * (out, active low) + */ + if ((gpio_request(gpio + TWL4030_GPIO_MAX, "GPIO_USBH_CPEN") < 0) || + (gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0) < 0)) + pr_err("IGEP2: Could not obtain gpio for USBH_CPEN"); + return 0; }; -- GitLab