提交 6033a949 编写于 作者: B Brian Norris

mtd: nand: pxa3xx: make ECC configuration checks more explicit

The Armada BCH configuration in this driver uses one of the two
following ECC schemes:

 16-bit correction per 2048 bytes
 16-bit correction per 1024 bytes

These are sufficient for mapping to the 4-bit per 512-bytes and 8-bit
per 512-bytes (respectively) minimum correctability requirements of many
common NAND.

The current code only checks for the required strength (4-bit or 8-bit)
without checking the ECC step size that is associated with that strength
(and simply assumes it is 512). While that is often a safe assumption to
make, let's make it explicit, since we have that information.
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Acked-by: NEzequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: NDaniel Mack <zonque@gmail.com>
上级 87f5336e
......@@ -1360,9 +1360,13 @@ static int pxa_ecc_init(struct pxa3xx_nand_info *info,
static int armada370_ecc_init(struct pxa3xx_nand_info *info,
struct nand_ecc_ctrl *ecc,
int strength, int page_size)
int strength, int ecc_stepsize, int page_size)
{
if (strength == 4 && page_size == 4096) {
/*
* Required ECC: 4-bit correction per 512 bytes
* Select: 16-bit correction per 2048 bytes
*/
if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) {
info->ecc_bch = 1;
info->chunk_size = 2048;
info->spare_size = 32;
......@@ -1373,7 +1377,11 @@ static int armada370_ecc_init(struct pxa3xx_nand_info *info,
ecc->strength = 16;
return 1;
} else if (strength == 8 && page_size == 4096) {
/*
* Required ECC: 8-bit correction per 512 bytes
* Select: 16-bit correction per 1024 bytes
*/
} else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) {
info->ecc_bch = 1;
info->chunk_size = 1024;
info->spare_size = 0;
......@@ -1481,6 +1489,7 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd)
if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
ret = armada370_ecc_init(info, &chip->ecc,
chip->ecc_strength_ds,
chip->ecc_step_ds,
mtd->writesize);
else
ret = pxa_ecc_init(info, &chip->ecc,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册