perf: add OMAP support for the new power events

The patch adds the new power management trace points for
the OMAP architecture.

The trace points are for:
- default idle handler. Since the cpuidle framework is
  instrumented in the generic way there is no need to
  add trace points in the OMAP specific cpuidle handler;
- SoC clocks changes (enable, disable, set_rate),
- power domain states: the desired target state and -if different-
  the actually hit state.

Because of the generic nature of the changes, OMAP3 and OMAP4 are supported.

Tested on OMAP3 with suspend/resume, cpuidle, basic DVFS.
Signed-off-by: NJean Pihet <j-pihet@ti.com>
Acked-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NKevin Hilman <khilman@ti.com>

arch/arm/mach-omap2/clock.c

@@ -22,7 +22,9 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/bitops.h>
+#include <trace/events/power.h>
 
+#include <asm/cpu.h>
 #include <plat/clock.h>
 #include "clockdomain.h"
 #include <plat/cpu.h>
@@ -261,8 +263,10 @@ void omap2_clk_disable(struct clk *clk)
 
 	pr_debug("clock: %s: disabling in hardware\n", clk->name);
 
-	if (clk->ops && clk->ops->disable)
+	if (clk->ops && clk->ops->disable) {
+		trace_clock_disable(clk->name, 0, smp_processor_id());
 		clk->ops->disable(clk);
+	}
 
 	if (clk->clkdm)
 		clkdm_clk_disable(clk->clkdm, clk);
@@ -314,6 +318,7 @@ int omap2_clk_enable(struct clk *clk)
 	}
 
 	if (clk->ops && clk->ops->enable) {
+		trace_clock_enable(clk->name, 1, smp_processor_id());
 		ret = clk->ops->enable(clk);
 		if (ret) {
 			WARN(1, "clock: %s: could not enable: %d\n",
@@ -353,8 +358,10 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 	pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate);
 
 	/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
-	if (clk->set_rate)
+	if (clk->set_rate) {
+		trace_clock_set_rate(clk->name, rate, smp_processor_id());
 		ret = clk->set_rate(clk, rate);
+	}
 
 	return ret;
 }

arch/arm/mach-omap2/pm34xx.c

@@ -29,6 +29,7 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/console.h>
+#include <trace/events/power.h>
 
 #include <plat/sram.h>
 #include "clockdomain.h"
@@ -519,8 +520,14 @@ static void omap3_pm_idle(void)
 	if (omap_irq_pending() || need_resched())
 		goto out;
 
+	trace_power_start(POWER_CSTATE, 1, smp_processor_id());
+	trace_cpu_idle(1, smp_processor_id());
+
 	omap_sram_idle();
 
+	trace_power_end(smp_processor_id());
+	trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
+
 out:
 	local_fiq_enable();
 	local_irq_enable();

arch/arm/mach-omap2/powerdomain.c

@@ -19,12 +19,15 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/string.h>
+#include <trace/events/power.h>
+
 #include "cm2xxx_3xxx.h"
 #include "prcm44xx.h"
 #include "cm44xx.h"
 #include "prm2xxx_3xxx.h"
 #include "prm44xx.h"
 
+#include <asm/cpu.h>
 #include <plat/cpu.h>
 #include "powerdomain.h"
 #include "clockdomain.h"
@@ -32,6 +35,8 @@
 
 #include "pm.h"
 
+#define PWRDM_TRACE_STATES_FLAG	(1<<31)
+
 enum {
 	PWRDM_STATE_NOW = 0,
 	PWRDM_STATE_PREV,
@@ -130,8 +135,7 @@ static void _update_logic_membank_counters(struct powerdomain *pwrdm)
 static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
 {
 
-	int prev;
-	int state;
+	int prev, state, trace_state = 0;
 
 	if (pwrdm == NULL)
 		return -EINVAL;
@@ -148,6 +152,17 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
 			pwrdm->state_counter[prev]++;
 		if (prev == PWRDM_POWER_RET)
 			_update_logic_membank_counters(pwrdm);
+		/*
+		 * If the power domain did not hit the desired state,
+		 * generate a trace event with both the desired and hit states
+		 */
+		if (state != prev) {
+			trace_state = (PWRDM_TRACE_STATES_FLAG |
+				       ((state & OMAP_POWERSTATE_MASK) << 8) |
+				       ((prev & OMAP_POWERSTATE_MASK) << 0));
+			trace_power_domain_target(pwrdm->name, trace_state,
+						  smp_processor_id());
+		}
 		break;
 	default:
 		return -EINVAL;
@@ -406,8 +421,13 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
 	pr_debug("powerdomain: setting next powerstate for %s to %0x\n",
 		 pwrdm->name, pwrst);
 
-	if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst)
+	if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
+		/* Trace the pwrdm desired target state */
+		trace_power_domain_target(pwrdm->name, pwrst,
+					  smp_processor_id());
+		/* Program the pwrdm desired target state */
 		ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst);
+	}
 
 	return ret;
 }