diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt
index 9c58f724396ab0881e851eaef1ed3a5902c14115..9d9ff5184939615668ed32164fc92e8dc32873c8 100644
--- a/Documentation/devicetree/bindings/sound/sgtl5000.txt
+++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt
@@ -37,6 +37,15 @@ VDDIO		1.8V		2.5V		3.3V
 2 =		3.33 mA		5.74 mA		8.03  mA
 3 =		4.99 mA		8.61 mA		12.05 mA
 
+- sclk-strength: the SCLK pad strength. Possible values are:
+0, 1, 2 and 3 as per the table below:
+
+VDDIO		1.8V		2.5V		3.3V
+0 = 		Disable
+1 =		1.66 mA		2.87 mA		4.02  mA
+2 =		3.33 mA		5.74 mA		8.03  mA
+3 =		4.99 mA		8.61 mA		12.05 mA
+
 Example:
 
 sgtl5000: codec@a {
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index add18d6d77da8d57707c640272a4f5c523974a6c..a6a4748c97f9d62f4e76e17f0428d20e837fb061 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -116,6 +116,13 @@ enum  {
 	I2S_LRCLK_STRENGTH_HIGH,
 };
 
+enum  {
+	I2S_SCLK_STRENGTH_DISABLE,
+	I2S_SCLK_STRENGTH_LOW,
+	I2S_SCLK_STRENGTH_MEDIUM,
+	I2S_SCLK_STRENGTH_HIGH,
+};
+
 /* sgtl5000 private structure in codec */
 struct sgtl5000_priv {
 	int sysclk;	/* sysclk rate */
@@ -129,6 +136,7 @@ struct sgtl5000_priv {
 	u8 micbias_resistor;
 	u8 micbias_voltage;
 	u8 lrclk_strength;
+	u8 sclk_strength;
 };
 
 /*
@@ -1302,7 +1310,9 @@ static int sgtl5000_probe(struct snd_soc_component *component)
 			SGTL5000_DAC_MUTE_RIGHT |
 			SGTL5000_DAC_MUTE_LEFT);
 
-	reg = ((sgtl5000->lrclk_strength) << SGTL5000_PAD_I2S_LRCLK_SHIFT | 0x5f);
+	reg = ((sgtl5000->lrclk_strength) << SGTL5000_PAD_I2S_LRCLK_SHIFT |
+	       (sgtl5000->sclk_strength) << SGTL5000_PAD_I2S_SCLK_SHIFT |
+	       0x1f);
 	snd_soc_component_write(component, SGTL5000_CHIP_PAD_STRENGTH, reg);
 
 	snd_soc_component_write(component, SGTL5000_CHIP_ANA_CTRL,
@@ -1542,6 +1552,13 @@ static int sgtl5000_i2c_probe(struct i2c_client *client,
 		sgtl5000->lrclk_strength = value;
 	}
 
+	sgtl5000->sclk_strength = I2S_SCLK_STRENGTH_LOW;
+	if (!of_property_read_u32(np, "sclk-strength", &value)) {
+		if (value > I2S_SCLK_STRENGTH_HIGH)
+			value = I2S_SCLK_STRENGTH_LOW;
+		sgtl5000->sclk_strength = value;
+	}
+
 	/* Ensure sgtl5000 will start with sane register values */
 	sgtl5000_fill_defaults(client);