From 5cedae9ca752a43cfb1074907d12c9f01fbebd45 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Wed, 31 May 2006 16:14:05 -0700 Subject: [PATCH] [PATCH] ARM: Fix XScale PMD setting The ARM Architecture Reference Manual lists bit 4 of the PMD as "implementation defined" and it must be set to zero on Intel XScale CPUs or the cache does not behave properly. Found by Mike Rapoport while debugging a flash issue on the PXA255: http://marc.10east.com/?l=linux-arm-kernel&m=114845287600782&w=1 Signed-off-by: Deepak Saxena Signed-off-by: Linus Torvalds --- arch/arm/mm/mm-armv.c | 4 ++-- include/asm-arm/system.h | 6 ++++++ 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c index f14b2d0f3690..95273de4f772 100644 --- a/arch/arm/mm/mm-armv.c +++ b/arch/arm/mm/mm-armv.c @@ -376,7 +376,7 @@ void __init build_mem_type_table(void) ecc_mask = 0; } - if (cpu_arch <= CPU_ARCH_ARMv5TEJ) { + if (cpu_arch <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) { for (i = 0; i < ARRAY_SIZE(mem_types); i++) { if (mem_types[i].prot_l1) mem_types[i].prot_l1 |= PMD_BIT4; @@ -631,7 +631,7 @@ void setup_mm_for_reboot(char mode) pgd = init_mm.pgd; base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT; - if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ) + if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) base_pmdval |= PMD_BIT4; for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) { diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index 95b3abf4851b..7c9568d30307 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -127,6 +127,12 @@ static inline int cpu_is_xsc3(void) } #endif +#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3) +#define cpu_is_xscale() 0 +#else +#define cpu_is_xscale() 1 +#endif + #define set_cr(x) \ __asm__ __volatile__( \ "mcr p15, 0, %0, c1, c0, 0 @ set CR" \ -- GitLab