提交 593ee4ed 编写于 作者: L Linus Torvalds

Merge tag 'char-misc-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are a number of small driver fixes for 4.8-rc5.

  The largest thing here is deleting an obsolete driver,
  drivers/misc/bh1780gli.c, as the functionality of it was replaced by
  an iio driver a while ago.

  The other fixes are things that have been reported, or reverts of
  broken stuff (the binder change).  All of these changes have been in
  linux-next for a while with no reported issues"

* tag 'char-misc-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  thunderbolt: Don't declare Falcon Ridge unsupported
  thunderbolt: Add support for INTEL_FALCON_RIDGE_2C controller.
  thunderbolt: Fix resume quirk for Falcon Ridge 4C.
  lkdtm: Mark lkdtm_rodata_do_nothing() notrace
  mei: me: disable driver on SPT SPS firmware
  Revert "android: binder: fix dangling pointer comparison"
  drivers/iio/light/Kconfig: SENSORS_BH1780 cleanup
  android: binder: fix dangling pointer comparison
  misc: delete bh1780 driver
...@@ -76,7 +76,6 @@ config BH1750 ...@@ -76,7 +76,6 @@ config BH1750
config BH1780 config BH1780
tristate "ROHM BH1780 ambient light sensor" tristate "ROHM BH1780 ambient light sensor"
depends on I2C depends on I2C
depends on !SENSORS_BH1780
help help
Say Y here to build support for the ROHM BH1780GLI ambient Say Y here to build support for the ROHM BH1780GLI ambient
light sensor. light sensor.
......
...@@ -345,16 +345,6 @@ config SENSORS_TSL2550 ...@@ -345,16 +345,6 @@ config SENSORS_TSL2550
This driver can also be built as a module. If so, the module This driver can also be built as a module. If so, the module
will be called tsl2550. will be called tsl2550.
config SENSORS_BH1780
tristate "ROHM BH1780GLI ambient light sensor"
depends on I2C && SYSFS
help
If you say yes here you get support for the ROHM BH1780GLI
ambient light sensor.
This driver can also be built as a module. If so, the module
will be called bh1780gli.
config SENSORS_BH1770 config SENSORS_BH1770
tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor" tristate "BH1770GLC / SFH7770 combined ALS - Proximity sensor"
depends on I2C depends on I2C
......
...@@ -19,7 +19,6 @@ obj-$(CONFIG_TIFM_CORE) += tifm_core.o ...@@ -19,7 +19,6 @@ obj-$(CONFIG_TIFM_CORE) += tifm_core.o
obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
obj-$(CONFIG_PHANTOM) += phantom.o obj-$(CONFIG_PHANTOM) += phantom.o
obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o obj-$(CONFIG_QCOM_COINCELL) += qcom-coincell.o
obj-$(CONFIG_SENSORS_BH1780) += bh1780gli.o
obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o
obj-$(CONFIG_SENSORS_APDS990X) += apds990x.o obj-$(CONFIG_SENSORS_APDS990X) += apds990x.o
obj-$(CONFIG_SGI_IOC4) += ioc4.o obj-$(CONFIG_SGI_IOC4) += ioc4.o
......
/*
* bh1780gli.c
* ROHM Ambient Light Sensor Driver
*
* Copyright (C) 2010 Texas Instruments
* Author: Hemanth V <hemanthv@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/of.h>
#define BH1780_REG_CONTROL 0x80
#define BH1780_REG_PARTID 0x8A
#define BH1780_REG_MANFID 0x8B
#define BH1780_REG_DLOW 0x8C
#define BH1780_REG_DHIGH 0x8D
#define BH1780_REVMASK (0xf)
#define BH1780_POWMASK (0x3)
#define BH1780_POFF (0x0)
#define BH1780_PON (0x3)
/* power on settling time in ms */
#define BH1780_PON_DELAY 2
struct bh1780_data {
struct i2c_client *client;
int power_state;
/* lock for sysfs operations */
struct mutex lock;
};
static int bh1780_write(struct bh1780_data *ddata, u8 reg, u8 val, char *msg)
{
int ret = i2c_smbus_write_byte_data(ddata->client, reg, val);
if (ret < 0)
dev_err(&ddata->client->dev,
"i2c_smbus_write_byte_data failed error %d Register (%s)\n",
ret, msg);
return ret;
}
static int bh1780_read(struct bh1780_data *ddata, u8 reg, char *msg)
{
int ret = i2c_smbus_read_byte_data(ddata->client, reg);
if (ret < 0)
dev_err(&ddata->client->dev,
"i2c_smbus_read_byte_data failed error %d Register (%s)\n",
ret, msg);
return ret;
}
static ssize_t bh1780_show_lux(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct platform_device *pdev = to_platform_device(dev);
struct bh1780_data *ddata = platform_get_drvdata(pdev);
int lsb, msb;
lsb = bh1780_read(ddata, BH1780_REG_DLOW, "DLOW");
if (lsb < 0)
return lsb;
msb = bh1780_read(ddata, BH1780_REG_DHIGH, "DHIGH");
if (msb < 0)
return msb;
return sprintf(buf, "%d\n", (msb << 8) | lsb);
}
static ssize_t bh1780_show_power_state(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct platform_device *pdev = to_platform_device(dev);
struct bh1780_data *ddata = platform_get_drvdata(pdev);
int state;
state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL");
if (state < 0)
return state;
return sprintf(buf, "%d\n", state & BH1780_POWMASK);
}
static ssize_t bh1780_store_power_state(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct platform_device *pdev = to_platform_device(dev);
struct bh1780_data *ddata = platform_get_drvdata(pdev);
unsigned long val;
int error;
error = kstrtoul(buf, 0, &val);
if (error)
return error;
if (val < BH1780_POFF || val > BH1780_PON)
return -EINVAL;
mutex_lock(&ddata->lock);
error = bh1780_write(ddata, BH1780_REG_CONTROL, val, "CONTROL");
if (error < 0) {
mutex_unlock(&ddata->lock);
return error;
}
msleep(BH1780_PON_DELAY);
ddata->power_state = val;
mutex_unlock(&ddata->lock);
return count;
}
static DEVICE_ATTR(lux, S_IRUGO, bh1780_show_lux, NULL);
static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO,
bh1780_show_power_state, bh1780_store_power_state);
static struct attribute *bh1780_attributes[] = {
&dev_attr_power_state.attr,
&dev_attr_lux.attr,
NULL
};
static const struct attribute_group bh1780_attr_group = {
.attrs = bh1780_attributes,
};
static int bh1780_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
struct bh1780_data *ddata;
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
return -EIO;
ddata = devm_kzalloc(&client->dev, sizeof(struct bh1780_data),
GFP_KERNEL);
if (ddata == NULL)
return -ENOMEM;
ddata->client = client;
i2c_set_clientdata(client, ddata);
ret = bh1780_read(ddata, BH1780_REG_PARTID, "PART ID");
if (ret < 0)
return ret;
dev_info(&client->dev, "Ambient Light Sensor, Rev : %d\n",
(ret & BH1780_REVMASK));
mutex_init(&ddata->lock);
return sysfs_create_group(&client->dev.kobj, &bh1780_attr_group);
}
static int bh1780_remove(struct i2c_client *client)
{
sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int bh1780_suspend(struct device *dev)
{
struct bh1780_data *ddata;
int state, ret;
struct i2c_client *client = to_i2c_client(dev);
ddata = i2c_get_clientdata(client);
state = bh1780_read(ddata, BH1780_REG_CONTROL, "CONTROL");
if (state < 0)
return state;
ddata->power_state = state & BH1780_POWMASK;
ret = bh1780_write(ddata, BH1780_REG_CONTROL, BH1780_POFF,
"CONTROL");
if (ret < 0)
return ret;
return 0;
}
static int bh1780_resume(struct device *dev)
{
struct bh1780_data *ddata;
int state, ret;
struct i2c_client *client = to_i2c_client(dev);
ddata = i2c_get_clientdata(client);
state = ddata->power_state;
ret = bh1780_write(ddata, BH1780_REG_CONTROL, state,
"CONTROL");
if (ret < 0)
return ret;
return 0;
}
#endif /* CONFIG_PM_SLEEP */
static SIMPLE_DEV_PM_OPS(bh1780_pm, bh1780_suspend, bh1780_resume);
static const struct i2c_device_id bh1780_id[] = {
{ "bh1780", 0 },
{ },
};
MODULE_DEVICE_TABLE(i2c, bh1780_id);
#ifdef CONFIG_OF
static const struct of_device_id of_bh1780_match[] = {
{ .compatible = "rohm,bh1780gli", },
{},
};
MODULE_DEVICE_TABLE(of, of_bh1780_match);
#endif
static struct i2c_driver bh1780_driver = {
.probe = bh1780_probe,
.remove = bh1780_remove,
.id_table = bh1780_id,
.driver = {
.name = "bh1780",
.pm = &bh1780_pm,
.of_match_table = of_match_ptr(of_bh1780_match),
},
};
module_i2c_driver(bh1780_driver);
MODULE_DESCRIPTION("BH1780GLI Ambient Light Sensor Driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Hemanth V <hemanthv@ti.com>");
...@@ -4,7 +4,7 @@ ...@@ -4,7 +4,7 @@
*/ */
#include "lkdtm.h" #include "lkdtm.h"
void lkdtm_rodata_do_nothing(void) void notrace lkdtm_rodata_do_nothing(void)
{ {
/* Does nothing. We just want an architecture agnostic "return". */ /* Does nothing. We just want an architecture agnostic "return". */
} }
...@@ -1263,8 +1263,14 @@ static bool mei_me_fw_type_nm(struct pci_dev *pdev) ...@@ -1263,8 +1263,14 @@ static bool mei_me_fw_type_nm(struct pci_dev *pdev)
static bool mei_me_fw_type_sps(struct pci_dev *pdev) static bool mei_me_fw_type_sps(struct pci_dev *pdev)
{ {
u32 reg; u32 reg;
/* Read ME FW Status check for SPS Firmware */ unsigned int devfn;
pci_read_config_dword(pdev, PCI_CFG_HFS_1, &reg);
/*
* Read ME FW Status register to check for SPS Firmware
* The SPS FW is only signaled in pci function 0
*/
devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_1, &reg);
trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg); trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg);
/* if bits [19:16] = 15, running SPS Firmware */ /* if bits [19:16] = 15, running SPS Firmware */
return (reg & 0xf0000) == 0xf0000; return (reg & 0xf0000) == 0xf0000;
......
...@@ -85,8 +85,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = { ...@@ -85,8 +85,8 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
{MEI_PCI_DEVICE(MEI_DEV_ID_SPT, mei_me_pch8_cfg)}, {MEI_PCI_DEVICE(MEI_DEV_ID_SPT, mei_me_pch8_cfg)},
{MEI_PCI_DEVICE(MEI_DEV_ID_SPT_2, mei_me_pch8_cfg)}, {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_2, mei_me_pch8_cfg)},
{MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H, mei_me_pch8_cfg)}, {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H, mei_me_pch8_sps_cfg)},
{MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H_2, mei_me_pch8_cfg)}, {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H_2, mei_me_pch8_sps_cfg)},
{MEI_PCI_DEVICE(MEI_DEV_ID_BXT_M, mei_me_pch8_cfg)}, {MEI_PCI_DEVICE(MEI_DEV_ID_BXT_M, mei_me_pch8_cfg)},
{MEI_PCI_DEVICE(MEI_DEV_ID_APL_I, mei_me_pch8_cfg)}, {MEI_PCI_DEVICE(MEI_DEV_ID_APL_I, mei_me_pch8_cfg)},
......
...@@ -3327,9 +3327,9 @@ static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev) ...@@ -3327,9 +3327,9 @@ static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev)
if (nhi->vendor != PCI_VENDOR_ID_INTEL if (nhi->vendor != PCI_VENDOR_ID_INTEL
|| (nhi->device != PCI_DEVICE_ID_INTEL_LIGHT_RIDGE && || (nhi->device != PCI_DEVICE_ID_INTEL_LIGHT_RIDGE &&
nhi->device != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C && nhi->device != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C &&
nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI &&
nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI) nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI)
|| nhi->subsystem_vendor != 0x2222 || nhi->class != PCI_CLASS_SYSTEM_OTHER << 8)
|| nhi->subsystem_device != 0x1111)
goto out; goto out;
dev_info(&dev->dev, "quirk: waiting for thunderbolt to reestablish PCI tunnels...\n"); dev_info(&dev->dev, "quirk: waiting for thunderbolt to reestablish PCI tunnels...\n");
device_pm_wait_for_dev(&dev->dev, &nhi->dev); device_pm_wait_for_dev(&dev->dev, &nhi->dev);
...@@ -3343,6 +3343,9 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, ...@@ -3343,6 +3343,9 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C,
quirk_apple_wait_for_thunderbolt); quirk_apple_wait_for_thunderbolt);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE,
quirk_apple_wait_for_thunderbolt);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE, PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE,
quirk_apple_wait_for_thunderbolt); quirk_apple_wait_for_thunderbolt);
......
...@@ -648,6 +648,12 @@ static struct pci_device_id nhi_ids[] = { ...@@ -648,6 +648,12 @@ static struct pci_device_id nhi_ids[] = {
.device = PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, .device = PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C,
.subvendor = 0x2222, .subdevice = 0x1111, .subvendor = 0x2222, .subdevice = 0x1111,
}, },
{
.class = PCI_CLASS_SYSTEM_OTHER << 8, .class_mask = ~0,
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI,
.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID,
},
{ {
.class = PCI_CLASS_SYSTEM_OTHER << 8, .class_mask = ~0, .class = PCI_CLASS_SYSTEM_OTHER << 8, .class_mask = ~0,
.vendor = PCI_VENDOR_ID_INTEL, .vendor = PCI_VENDOR_ID_INTEL,
......
...@@ -372,7 +372,9 @@ struct tb_switch *tb_switch_alloc(struct tb *tb, u64 route) ...@@ -372,7 +372,9 @@ struct tb_switch *tb_switch_alloc(struct tb *tb, u64 route)
if (sw->config.device_id != PCI_DEVICE_ID_INTEL_LIGHT_RIDGE && if (sw->config.device_id != PCI_DEVICE_ID_INTEL_LIGHT_RIDGE &&
sw->config.device_id != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C && sw->config.device_id != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C &&
sw->config.device_id != PCI_DEVICE_ID_INTEL_PORT_RIDGE) sw->config.device_id != PCI_DEVICE_ID_INTEL_PORT_RIDGE &&
sw->config.device_id != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE &&
sw->config.device_id != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE)
tb_sw_warn(sw, "unsupported switch device id %#x\n", tb_sw_warn(sw, "unsupported switch device id %#x\n",
sw->config.device_id); sw->config.device_id);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册