ARM i.MX tzic: add handle_irq function

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

arch/arm/plat-mxc/include/mach/common.h

@@ -74,6 +74,7 @@ extern int mx53_revision(void);
 extern int mx53_display_revision(void);
 
 void avic_handle_irq(struct pt_regs *);
+void tzic_handle_irq(struct pt_regs *);
 
 #define imx1_handle_irq avic_handle_irq
 #define imx21_handle_irq avic_handle_irq
@@ -81,5 +82,8 @@ void avic_handle_irq(struct pt_regs *);
 #define imx27_handle_irq avic_handle_irq
 #define imx31_handle_irq avic_handle_irq
 #define imx35_handle_irq avic_handle_irq
+#define imx50_handle_irq tzic_handle_irq
+#define imx51_handle_irq tzic_handle_irq
+#define imx53_handle_irq tzic_handle_irq
 
 #endif

arch/arm/plat-mxc/tzic.c

@@ -42,7 +42,7 @@
 #define TZIC_SRCCLAR0	0x0280	/* Source Clear Register 0 */
 #define TZIC_PRIORITY0	0x0400	/* Priority Register 0 */
 #define TZIC_PND0	0x0D00	/* Pending Register 0 */
-#define TZIC_HIPND0	0x0D80	/* High Priority Pending Register */
+#define TZIC_HIPND(i)	(0x0D80+ ((i) << 2))	/* High Priority Pending Register */
 #define TZIC_WAKEUP0(i)	(0x0E00 + ((i) << 2))	/* Wakeup Config Register */
 #define TZIC_SWINT	0x0F00	/* Software Interrupt Rigger Register */
 #define TZIC_ID0	0x0FD0	/* Indentification Register 0 */
@@ -96,6 +96,28 @@ static __init void tzic_init_gc(unsigned int irq_start)
 	irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0);
 }
 
+asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs)
+{
+	u32 stat;
+	int i, irqofs, handled;
+
+	do {
+		handled = 0;
+
+		for (i = 0; i < 4; i++) {
+			stat = __raw_readl(tzic_base + TZIC_HIPND(i)) &
+				__raw_readl(tzic_base + TZIC_INTSEC0(i));
+
+			while (stat) {
+				handled = 1;
+				irqofs = fls(stat) - 1;
+				handle_IRQ(irqofs + i * 32, regs);
+				stat &= ~(1 << irqofs);
+			}
+		}
+	} while (handled);
+}
+
 /*
  * This function initializes the TZIC hardware and disables all the
  * interrupts. It registers the interrupt enable and disable functions