powerpc/85xx: Kconfig cleanup

Introduce new FSL_SOC_BOOKE Kconfig to handle both 85xx and QorIQ
based chips.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

arch/powerpc/platforms/85xx/Kconfig

-menuconfig MPC85xx
-	bool "Machine Type"
-	depends on PPC_85xx
+menuconfig FSL_SOC_BOOKE
+	bool "Freescale Book-E Machine Type"
+	depends on PPC_85xx || PPC_BOOK3E
+	select FSL_SOC
 	select PPC_UDBG_16550
 	select MPIC
 	select PPC_PCI_CHOICE
@@ -8,7 +9,7 @@ menuconfig MPC85xx
 	select SERIAL_8250_SHARE_IRQ if SERIAL_8250
 	default y
 
-if MPC85xx
+if FSL_SOC_BOOKE
 
 config MPC8540_ADS
 	bool "Freescale MPC8540 ADS"
@@ -144,7 +145,7 @@ config SBC8560
 	help
 	  This option enables support for the Wind River SBC8560 board
 
-endif # MPC85xx
+endif # FSL_SOC_BOOKE
 
 config TQM85xx
 	bool

arch/powerpc/platforms/Kconfig

@@ -260,7 +260,7 @@ config QE_GPIO
 
 config CPM2
 	bool "Enable support for the CPM2 (Communications Processor Module)"
-	depends on MPC85xx || 8260
+	depends on (FSL_SOC_BOOKE && PPC32) || 8260
 	select CPM
 	select PPC_LIB_RHEAP
 	select PPC_PCI_CHOICE
@@ -305,7 +305,7 @@ source "arch/powerpc/sysdev/bestcomm/Kconfig"
 
 config MPC8xxx_GPIO
 	bool "MPC8xxx GPIO support"
-	depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || PPC_85xx || PPC_86xx
+	depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || FSL_SOC_BOOKE || PPC_86xx
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
 	help

arch/powerpc/platforms/Kconfig.cputype

@@ -28,8 +28,6 @@ config PPC_BOOK3S_32
 config PPC_85xx
 	bool "Freescale 85xx"
 	select E500
-	select FSL_SOC
-	select MPC85xx
 
 config PPC_8xx
 	bool "Freescale 8xx"
@@ -138,6 +136,14 @@ config PPC_FPU
 	bool
 	default y if PPC64
 
+config FSL_EMB_PERFMON
+	bool "Freescale Embedded Perfmon"
+	depends on E500 || PPC_83xx
+	help
+	  This is the Performance Monitor support found on the e500 core
+	  and some e300 cores (c3 and c4).  Select this only if your
+	  core supports the Embedded Performance Monitor APU
+
 config 4xx
 	bool
 	depends on 40x || 44x
@@ -153,13 +159,6 @@ config FSL_BOOKE
 	depends on E200 || E500
 	default y
 
-config FSL_EMB_PERFMON
-	bool "Freescale Embedded Perfmon"
-	depends on E500 || PPC_83xx
-	help
-	  This is the Performance Monitor support found on the e500 core
-	  and some e300 cores (c3 and c4).  Select this only if your
-	  core supports the Embedded Performance Monitor APU
 
 config PTE_64BIT
 	bool

arch/powerpc/platforms/Makefile

@@ -12,7 +12,7 @@ obj-$(CONFIG_PPC_MPC52xx)	+= 52xx/
 obj-$(CONFIG_PPC_8xx)		+= 8xx/
 obj-$(CONFIG_PPC_82xx)		+= 82xx/
 obj-$(CONFIG_PPC_83xx)		+= 83xx/
-obj-$(CONFIG_PPC_85xx)		+= 85xx/
+obj-$(CONFIG_FSL_SOC_BOOKE)	+= 85xx/
 obj-$(CONFIG_PPC_86xx)		+= 86xx/
 obj-$(CONFIG_PPC_PSERIES)	+= pseries/
 obj-$(CONFIG_PPC_ISERIES)	+= iseries/

arch/powerpc/sysdev/fsl_pci.c

@@ -56,7 +56,7 @@ static int __init fsl_pcie_check_link(struct pci_controller *hose)
 	return 0;
 }
 
-#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
+#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
 static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
 	unsigned int index, const struct resource *res,
 	resource_size_t offset)
@@ -394,7 +394,7 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header);
-#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
+#endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
 
 #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header);

arch/powerpc/sysdev/fsl_soc.c

@@ -372,7 +372,7 @@ static int __init fsl_usb_of_init(void)
 
 arch_initcall(fsl_usb_of_init);
 
-#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
+#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
 static __be32 __iomem *rstcr;
 
 static int __init setup_rstcr(void)