net: renesas: ravb: Fix a stuck issue when a lot of frames are received

When a lot of frames were received in the short term, the driver
caused a stuck of receiving until a new frame was received. For example,
the following command from other device could cause this issue.

    $ sudo ping -f -l 1000 -c 1000 <this driver's ipaddress>

The previous code always cleared the interrupt flag of RX but checks
the interrupt flags in ravb_poll(). So, ravb_poll() could not call
ravb_rx() in the next time until a new RX frame was received if
ravb_rx() returned true. To fix the issue, always calls ravb_rx()
regardless the interrupt flags condition.

Fixes: c156633f ("Renesas Ethernet AVB driver proper")
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/renesas/ravb_main.c

@@ -911,31 +911,20 @@ static int ravb_poll(struct napi_struct *napi, int budget)
 	int q = napi - priv->napi;
 	int mask = BIT(q);
 	int quota = budget;
-	u32 ris0, tis;
-
-	for (;;) {
-		tis = ravb_read(ndev, TIS);
-		ris0 = ravb_read(ndev, RIS0);
-		if (!((ris0 & mask) || (tis & mask)))
-			break;
 
 	/* Processing RX Descriptor Ring */
-		if (ris0 & mask) {
 	/* Clear RX interrupt */
 	ravb_write(ndev, ~(mask | RIS0_RESERVED), RIS0);
 	if (ravb_rx(ndev, &quota, q))
 		goto out;
-		}
-		/* Processing TX Descriptor Ring */
-		if (tis & mask) {
+
+	/* Processing RX Descriptor Ring */
 	spin_lock_irqsave(&priv->lock, flags);
 	/* Clear TX interrupt */
 	ravb_write(ndev, ~(mask | TIS_RESERVED), TIS);
 	ravb_tx_free(ndev, q, true);
 	netif_wake_subqueue(ndev, q);
 	spin_unlock_irqrestore(&priv->lock, flags);
-		}
-	}
 
 	napi_complete(napi);