Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 560852a1 编写于 作者: R Richard Weinberger
浏览文件
操作

Merge tag 'spi-nor/for-5.4' of... 

Merge tag 'spi-nor/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/for-5.4

MTD core changes:
- add debugfs nodes for querying the flash name and id

SPI NOR core changes:
- always use bounce buffer for register read/writes
- move m25p80 code in spi-nor.c
- rework hwcaps selection for the spi-mem case
- rework the core in order to move the manufacturer specific code
  out of it:
        - regroup flash parameters in 'struct spi_nor_flash_parameter'
        - add default_init() and post_sfdp() hooks to tweak the flash
          parameters
        - introduce the ->set_4byte(), ->convert_addr() and ->setup()
          methods, to deal with manufacturer specific code
        - rework the SPI NOR lock/unlock logic
- fix an error code in spi_nor_read_raw()
- fix a memory leak bug
- enable the debugfs for the partname and partid
- add support for few flashes

SPI NOR controller drivers changes:
- intel-spi:
        - Whitelist 4B read commands
        - Add support for Intel Tiger Lake SPI serial flash
- aspeed-smc: Add of_node_put()
- hisi-sfc: Add of_node_put()
- cadence-quadspi: Fix QSPI RCU Schedule Stall
上级 c3c1acaf 9607af6f
隐藏空白更改
内联 并排
Showing with 1574 addition and 913 deletion
drivers/mtd/devices/Kconfig
浏览文件 @ 560852a1
......@@ -79,24 +79,6 @@ config MTD_DATAFLASH_OTP
other key product data. The second half is programmed with a
unique-to-each-chip bit pattern at the factory.
config MTD_M25P80
tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
depends on SPI_MASTER && MTD_SPI_NOR
select SPI_MEM
help
This enables access to most modern SPI flash chips, used for
program and data storage. Series supported include Atmel AT26DF,
Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips
are supported as well. See the driver source for the current list,
or to add other chips.
Note that the original DataFlash chips (AT45 series, not AT26DF),
need an entirely different driver.
Set up your spi devices with the right board-specific platform data,
if you want to specify device partitioning or to use a device which
doesn't support the JEDEC ID instruction.
config MTD_MCHP23K256
tristate "Microchip 23K256 SRAM"
depends on SPI_MASTER
......
drivers/mtd/devices/Makefile
浏览文件 @ 560852a1
......@@ -12,7 +12,6 @@ obj-$(CONFIG_MTD_MTDRAM) += mtdram.o
obj-$(CONFIG_MTD_LART) += lart.o
obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o
obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o
obj-$(CONFIG_MTD_M25P80) += m25p80.o
obj-$(CONFIG_MTD_MCHP23K256) += mchp23k256.o
obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o
obj-$(CONFIG_MTD_SST25L) += sst25l.o
......
drivers/mtd/devices/m25p80.c 已删除 100644 → 0
浏览文件 @ c3c1acaf
// SPDX-License-Identifier: GPL-2.0-only
/*
* MTD SPI driver for ST M25Pxx (and similar) serial flash chips
*
* Author: Mike Lavender, mike@steroidmicros.com
*
* Copyright (c) 2005, Intec Automation Inc.
*
* Some parts are based on lart.c by Abraham Van Der Merwe
*
* Cleaned up and generalized based on mtd_dataflash.c
*/
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi-mem.h>
#include <linux/spi/flash.h>
#include <linux/mtd/spi-nor.h>
struct m25p {
struct spi_mem *spimem;
struct spi_nor spi_nor;
};
static int m25p80_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len)
{
struct m25p *flash = nor->priv;
struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(code, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_IN(len, NULL, 1));
void *scratchbuf;
int ret;
scratchbuf = kmalloc(len, GFP_KERNEL);
if (!scratchbuf)
return -ENOMEM;
op.data.buf.in = scratchbuf;
ret = spi_mem_exec_op(flash->spimem, &op);
if (ret < 0)
dev_err(&flash->spimem->spi->dev, "error %d reading %x\n", ret,
code);
else
memcpy(val, scratchbuf, len);
kfree(scratchbuf);
return ret;
}
static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
{
struct m25p *flash = nor->priv;
struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_OUT(len, NULL, 1));
void *scratchbuf;
int ret;
scratchbuf = kmemdup(buf, len, GFP_KERNEL);
if (!scratchbuf)
return -ENOMEM;
op.data.buf.out = scratchbuf;
ret = spi_mem_exec_op(flash->spimem, &op);
kfree(scratchbuf);
return ret;
}
static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
const u_char *buf)
{
struct m25p *flash = nor->priv;
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1),
SPI_MEM_OP_ADDR(nor->addr_width, to, 1),
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_OUT(len, buf, 1));
int ret;
/* get transfer protocols. */
op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto);
op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto);
op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto);
if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
op.addr.nbytes = 0;
ret = spi_mem_adjust_op_size(flash->spimem, &op);
if (ret)
return ret;
op.data.nbytes = len < op.data.nbytes ? len : op.data.nbytes;
ret = spi_mem_exec_op(flash->spimem, &op);
if (ret)
return ret;
return op.data.nbytes;
}
/*
* Read an address range from the nor chip. The address range
* may be any size provided it is within the physical boundaries.
*/
static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
u_char *buf)
{
struct m25p *flash = nor->priv;
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1),
SPI_MEM_OP_ADDR(nor->addr_width, from, 1),
SPI_MEM_OP_DUMMY(nor->read_dummy, 1),
SPI_MEM_OP_DATA_IN(len, buf, 1));
size_t remaining = len;
int ret;
/* get transfer protocols. */
op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto);
op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto);
op.dummy.buswidth = op.addr.buswidth;
op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto);
/* convert the dummy cycles to the number of bytes */
op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;
while (remaining) {
op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX;
ret = spi_mem_adjust_op_size(flash->spimem, &op);
if (ret)
return ret;
ret = spi_mem_exec_op(flash->spimem, &op);
if (ret)
return ret;
op.addr.val += op.data.nbytes;
remaining -= op.data.nbytes;
op.data.buf.in += op.data.nbytes;
}
return len;
}
/*
* board specific setup should have ensured the SPI clock used here
* matches what the READ command supports, at least until this driver
* understands FAST_READ (for clocks over 25 MHz).
*/
static int m25p_probe(struct spi_mem *spimem)
{
struct spi_device *spi = spimem->spi;
struct flash_platform_data *data;
struct m25p *flash;
struct spi_nor *nor;
struct spi_nor_hwcaps hwcaps = {
.mask = SNOR_HWCAPS_READ |
SNOR_HWCAPS_READ_FAST |
SNOR_HWCAPS_PP,
};
char *flash_name;
int ret;
data = dev_get_platdata(&spimem->spi->dev);
flash = devm_kzalloc(&spimem->spi->dev, sizeof(*flash), GFP_KERNEL);
if (!flash)
return -ENOMEM;
nor = &flash->spi_nor;
/* install the hooks */
nor->read = m25p80_read;
nor->write = m25p80_write;
nor->write_reg = m25p80_write_reg;
nor->read_reg = m25p80_read_reg;
nor->dev = &spimem->spi->dev;
spi_nor_set_flash_node(nor, spi->dev.of_node);
nor->priv = flash;
spi_mem_set_drvdata(spimem, flash);
flash->spimem = spimem;
if (spi->mode & SPI_RX_OCTAL) {
hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
if (spi->mode & SPI_TX_OCTAL)
hwcaps.mask |= (SNOR_HWCAPS_READ_1_8_8 |
SNOR_HWCAPS_PP_1_1_8 |
SNOR_HWCAPS_PP_1_8_8);
} else if (spi->mode & SPI_RX_QUAD) {
hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
if (spi->mode & SPI_TX_QUAD)
hwcaps.mask |= (SNOR_HWCAPS_READ_1_4_4 |
SNOR_HWCAPS_PP_1_1_4 |
SNOR_HWCAPS_PP_1_4_4);
} else if (spi->mode & SPI_RX_DUAL) {
hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
if (spi->mode & SPI_TX_DUAL)
hwcaps.mask |= SNOR_HWCAPS_READ_1_2_2;
}
if (data && data->name)
nor->mtd.name = data->name;
if (!nor->mtd.name)
nor->mtd.name = spi_mem_get_name(spimem);
/* For some (historical?) reason many platforms provide two different
* names in flash_platform_data: "name" and "type". Quite often name is
* set to "m25p80" and then "type" provides a real chip name.
* If that's the case, respect "type" and ignore a "name".
*/
if (data && data->type)
flash_name = data->type;
else if (!strcmp(spi->modalias, "spi-nor"))
flash_name = NULL; /* auto-detect */
else
flash_name = spi->modalias;
ret = spi_nor_scan(nor, flash_name, &hwcaps);
if (ret)
return ret;
return mtd_device_register(&nor->mtd, data ? data->parts : NULL,
data ? data->nr_parts : 0);
}
static int m25p_remove(struct spi_mem *spimem)
{
struct m25p *flash = spi_mem_get_drvdata(spimem);
spi_nor_restore(&flash->spi_nor);
/* Clean up MTD stuff. */
return mtd_device_unregister(&flash->spi_nor.mtd);
}
static void m25p_shutdown(struct spi_mem *spimem)
{
struct m25p *flash = spi_mem_get_drvdata(spimem);
spi_nor_restore(&flash->spi_nor);
}
/*
* Do NOT add to this array without reading the following:
*
* Historically, many flash devices are bound to this driver by their name. But
* since most of these flash are compatible to some extent, and their
* differences can often be differentiated by the JEDEC read-ID command, we
* encourage new users to add support to the spi-nor library, and simply bind
* against a generic string here (e.g., "jedec,spi-nor").
*
* Many flash names are kept here in this list (as well as in spi-nor.c) to
* keep them available as module aliases for existing platforms.
*/
static const struct spi_device_id m25p_ids[] = {
/*
* Allow non-DT platform devices to bind to the "spi-nor" modalias, and
* hack around the fact that the SPI core does not provide uevent
* matching for .of_match_table
*/
{"spi-nor"},
/*
* Entries not used in DTs that should be safe to drop after replacing
* them with "spi-nor" in platform data.
*/
{"s25sl064a"}, {"w25x16"}, {"m25p10"}, {"m25px64"},
/*
* Entries that were used in DTs without "jedec,spi-nor" fallback and
* should be kept for backward compatibility.
*/
{"at25df321a"}, {"at25df641"}, {"at26df081a"},
{"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, {"mx25l12805d"},
{"mx25l25635e"},{"mx66l51235l"},
{"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"},
{"s25fl256s1"}, {"s25fl512s"}, {"s25sl12801"}, {"s25fl008k"},
{"s25fl064k"},
{"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"},
{"m25p40"}, {"m25p80"}, {"m25p16"}, {"m25p32"},
{"m25p64"}, {"m25p128"},
{"w25x80"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"},
{"w25q80bl"}, {"w25q128"}, {"w25q256"},
/* Flashes that can't be detected using JEDEC */
{"m25p05-nonjedec"}, {"m25p10-nonjedec"}, {"m25p20-nonjedec"},
{"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"},
{"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"},
/* Everspin MRAMs (non-JEDEC) */
{ "mr25h128" }, /* 128 Kib, 40 MHz */
{ "mr25h256" }, /* 256 Kib, 40 MHz */
{ "mr25h10" }, /* 1 Mib, 40 MHz */
{ "mr25h40" }, /* 4 Mib, 40 MHz */
{ },
};
MODULE_DEVICE_TABLE(spi, m25p_ids);
static const struct of_device_id m25p_of_table[] = {
/*
* Generic compatibility for SPI NOR that can be identified by the
* JEDEC READ ID opcode (0x9F). Use this, if possible.
*/
{ .compatible = "jedec,spi-nor" },
{}
};
MODULE_DEVICE_TABLE(of, m25p_of_table);
static struct spi_mem_driver m25p80_driver = {
.spidrv = {
.driver = {
.name = "m25p80",
.of_match_table = m25p_of_table,
},
.id_table = m25p_ids,
},
.probe = m25p_probe,
.remove = m25p_remove,
.shutdown = m25p_shutdown,
/* REVISIT: many of these chips have deep power-down modes, which
* should clearly be entered on suspend() to minimize power use.
* And also when they're otherwise idle...
*/
};
module_spi_mem_driver(m25p80_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mike Lavender");
MODULE_DESCRIPTION("MTD SPI driver for ST M25Pxx flash chips");
drivers/mtd/mtdcore.c
浏览文件 @ 560852a1
......@@ -335,6 +335,82 @@ static const struct device_type mtd_devtype = {
.release = mtd_release,
};
static int mtd_partid_show(struct seq_file *s, void *p)
{
struct mtd_info *mtd = s->private;
seq_printf(s, "%s\n", mtd->dbg.partid);
return 0;
}
static int mtd_partid_debugfs_open(struct inode *inode, struct file *file)
{
return single_open(file, mtd_partid_show, inode->i_private);
}
static const struct file_operations mtd_partid_debug_fops = {
.open = mtd_partid_debugfs_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int mtd_partname_show(struct seq_file *s, void *p)
{
struct mtd_info *mtd = s->private;
seq_printf(s, "%s\n", mtd->dbg.partname);
return 0;
}
static int mtd_partname_debugfs_open(struct inode *inode, struct file *file)
{
return single_open(file, mtd_partname_show, inode->i_private);
}
static const struct file_operations mtd_partname_debug_fops = {
.open = mtd_partname_debugfs_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static struct dentry *dfs_dir_mtd;
static void mtd_debugfs_populate(struct mtd_info *mtd)
{
struct device *dev = &mtd->dev;
struct dentry *root, *dent;
if (IS_ERR_OR_NULL(dfs_dir_mtd))
return;
root = debugfs_create_dir(dev_name(dev), dfs_dir_mtd);
if (IS_ERR_OR_NULL(root)) {
dev_dbg(dev, "won't show data in debugfs\n");
return;
}
mtd->dbg.dfs_dir = root;
if (mtd->dbg.partid) {
dent = debugfs_create_file("partid", 0400, root, mtd,
&mtd_partid_debug_fops);
if (IS_ERR_OR_NULL(dent))
dev_err(dev, "can't create debugfs entry for partid\n");
}
if (mtd->dbg.partname) {
dent = debugfs_create_file("partname", 0400, root, mtd,
&mtd_partname_debug_fops);
if (IS_ERR_OR_NULL(dent))
dev_err(dev,
"can't create debugfs entry for partname\n");
}
}
#ifndef CONFIG_MMU
unsigned mtd_mmap_capabilities(struct mtd_info *mtd)
{
......@@ -512,8 +588,6 @@ static int mtd_nvmem_add(struct mtd_info *mtd)
return 0;
}
static struct dentry *dfs_dir_mtd;
/**
* add_mtd_device - register an MTD device
* @mtd: pointer to new MTD device info structure
......@@ -607,13 +681,7 @@ int add_mtd_device(struct mtd_info *mtd)
if (error)
goto fail_nvmem_add;
if (!IS_ERR_OR_NULL(dfs_dir_mtd)) {
mtd->dbg.dfs_dir = debugfs_create_dir(dev_name(&mtd->dev), dfs_dir_mtd);
if (IS_ERR_OR_NULL(mtd->dbg.dfs_dir)) {
pr_debug("mtd device %s won't show data in debugfs\n",
dev_name(&mtd->dev));
}
}
mtd_debugfs_populate(mtd);
device_create(&mtd_class, mtd->dev.parent, MTD_DEVT(i) + 1, NULL,
"mtd%dro", i);
......
drivers/mtd/spi-nor/Kconfig
浏览文件 @ 560852a1
......@@ -2,6 +2,8 @@
menuconfig MTD_SPI_NOR
tristate "SPI-NOR device support"
depends on MTD
depends on MTD && SPI_MASTER
select SPI_MEM
help
This is the framework for the SPI NOR which can be used by the SPI
device drivers and the SPI-NOR device driver.
......
drivers/mtd/spi-nor/aspeed-smc.c
浏览文件 @ 560852a1
......@@ -836,8 +836,10 @@ static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller,
controller->chips[cs] = chip;
}
if (ret)
if (ret) {
of_node_put(child);
aspeed_smc_unregister(controller);
}
return ret;
}
......
drivers/mtd/spi-nor/cadence-quadspi.c
浏览文件 @ 560852a1
......@@ -13,6 +13,7 @@
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/module.h>
......@@ -241,23 +242,13 @@ struct cqspi_driver_platdata {
#define CQSPI_IRQ_STATUS_MASK 0x1FFFF
static int cqspi_wait_for_bit(void __iomem *reg, const u32 mask, bool clear)
static int cqspi_wait_for_bit(void __iomem *reg, const u32 mask, bool clr)
{
unsigned long end = jiffies + msecs_to_jiffies(CQSPI_TIMEOUT_MS);
u32 val;
while (1) {
val = readl(reg);
if (clear)
val = ~val;
val &= mask;
if (val == mask)
return 0;
if (time_after(jiffies, end))
return -ETIMEDOUT;
}
return readl_relaxed_poll_timeout(reg, val,
(((clr ? ~val : val) & mask) == mask),
10, CQSPI_TIMEOUT_MS * 1000);
}
static bool cqspi_is_idle(struct cqspi_st *cqspi)
......
drivers/mtd/spi-nor/hisi-sfc.c
浏览文件 @ 560852a1
......@@ -401,6 +401,7 @@ static int hisi_spi_nor_register_all(struct hifmc_host *host)
if (host->num_chip == HIFMC_MAX_CHIP_NUM) {
dev_warn(dev, "Flash device number exceeds the maximum chipselect number\n");
of_node_put(np);
break;
}
}
......
drivers/mtd/spi-nor/intel-spi-pci.c
浏览文件 @ 560852a1
......@@ -65,6 +65,7 @@ static const struct pci_device_id intel_spi_pci_ids[] = {
{ PCI_VDEVICE(INTEL, 0x19e0), (unsigned long)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x34a4), (unsigned long)&bxt_info },
{ PCI_VDEVICE(INTEL, 0x4b24), (unsigned long)&bxt_info },
{ PCI_VDEVICE(INTEL, 0xa0a4), (unsigned long)&bxt_info },
{ PCI_VDEVICE(INTEL, 0xa1a4), (unsigned long)&bxt_info },
{ PCI_VDEVICE(INTEL, 0xa224), (unsigned long)&bxt_info },
{ },
......
drivers/mtd/spi-nor/intel-spi.c
浏览文件 @ 560852a1
......@@ -621,6 +621,8 @@ static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len,
switch (nor->read_opcode) {
case SPINOR_OP_READ:
case SPINOR_OP_READ_FAST:
case SPINOR_OP_READ_4B:
case SPINOR_OP_READ_FAST_4B:
break;
default:
return -EINVAL;
......
drivers/mtd/spi-nor/spi-nor.c
浏览文件 @ 560852a1
......@@ -19,6 +19,7 @@
#include <linux/mtd/mtd.h>
#include <linux/of_platform.h>
#include <linux/sched/task_stack.h>
#include <linux/spi/flash.h>
#include <linux/mtd/spi-nor.h>
......@@ -39,71 +40,6 @@
#define SPI_NOR_MAX_ID_LEN 6
#define SPI_NOR_MAX_ADDR_WIDTH 4
struct spi_nor_read_command {
u8 num_mode_clocks;
u8 num_wait_states;
u8 opcode;
enum spi_nor_protocol proto;
};
struct spi_nor_pp_command {
u8 opcode;
enum spi_nor_protocol proto;
};
enum spi_nor_read_command_index {
SNOR_CMD_READ,
SNOR_CMD_READ_FAST,
SNOR_CMD_READ_1_1_1_DTR,
/* Dual SPI */
SNOR_CMD_READ_1_1_2,
SNOR_CMD_READ_1_2_2,
SNOR_CMD_READ_2_2_2,
SNOR_CMD_READ_1_2_2_DTR,
/* Quad SPI */
SNOR_CMD_READ_1_1_4,
SNOR_CMD_READ_1_4_4,
SNOR_CMD_READ_4_4_4,
SNOR_CMD_READ_1_4_4_DTR,
/* Octal SPI */
SNOR_CMD_READ_1_1_8,
SNOR_CMD_READ_1_8_8,
SNOR_CMD_READ_8_8_8,
SNOR_CMD_READ_1_8_8_DTR,
SNOR_CMD_READ_MAX
};
enum spi_nor_pp_command_index {
SNOR_CMD_PP,
/* Quad SPI */
SNOR_CMD_PP_1_1_4,
SNOR_CMD_PP_1_4_4,
SNOR_CMD_PP_4_4_4,
/* Octal SPI */
SNOR_CMD_PP_1_1_8,
SNOR_CMD_PP_1_8_8,
SNOR_CMD_PP_8_8_8,
SNOR_CMD_PP_MAX
};
struct spi_nor_flash_parameter {
u64 size;
u32 page_size;
struct spi_nor_hwcaps hwcaps;
struct spi_nor_read_command reads[SNOR_CMD_READ_MAX];
struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX];
int (*quad_enable)(struct spi_nor *nor);
};
struct sfdp_parameter_header {
u8 id_lsb;
u8 minor;
......@@ -218,16 +154,26 @@ struct sfdp_bfpt {
/**
* struct spi_nor_fixups - SPI NOR fixup hooks
* @default_init: called after default flash parameters init. Used to tweak
* flash parameters when information provided by the flash_info
* table is incomplete or wrong.
* @post_bfpt: called after the BFPT table has been parsed
* @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs
* that do not support RDSFDP). Typically used to tweak various
* parameters that could not be extracted by other means (i.e.
* when information provided by the SFDP/flash_info tables are
* incomplete or wrong).
*
* Those hooks can be used to tweak the SPI NOR configuration when the SFDP
* table is broken or not available.
*/
struct spi_nor_fixups {
void (*default_init)(struct spi_nor *nor);
int (*post_bfpt)(struct spi_nor *nor,
const struct sfdp_parameter_header *bfpt_header,
const struct sfdp_bfpt *bfpt,
struct spi_nor_flash_parameter *params);
void (*post_sfdp)(struct spi_nor *nor);
};
struct flash_info {
......@@ -265,6 +211,14 @@ struct flash_info {
* bit. Must be used with
* SPI_NOR_HAS_LOCK.
*/
#define SPI_NOR_XSR_RDY BIT(10) /*
* S3AN flashes have specific opcode to
* read the status register.
* Flags SPI_NOR_XSR_RDY and SPI_S3AN
* use the same bit as one implies the
* other, but we will get rid of
* SPI_S3AN soon.
*/
#define SPI_S3AN BIT(10) /*
* Xilinx Spartan 3AN In-System Flash
* (MFR cannot be used for probing
......@@ -282,12 +236,158 @@ struct flash_info {
/* Part specific fixup hooks. */
const struct spi_nor_fixups *fixups;
int (*quad_enable)(struct spi_nor *nor);
};
#define JEDEC_MFR(info) ((info)->id[0])
/**
* spi_nor_spimem_xfer_data() - helper function to read/write data to
* flash's memory region
* @nor: pointer to 'struct spi_nor'
* @op: pointer to 'struct spi_mem_op' template for transfer
*
* Return: number of bytes transferred on success, -errno otherwise
*/
static ssize_t spi_nor_spimem_xfer_data(struct spi_nor *nor,
struct spi_mem_op *op)
{
bool usebouncebuf = false;
void *rdbuf = NULL;
const void *buf;
int ret;
if (op->data.dir == SPI_MEM_DATA_IN)
buf = op->data.buf.in;
else
buf = op->data.buf.out;
if (object_is_on_stack(buf) || !virt_addr_valid(buf))
usebouncebuf = true;
if (usebouncebuf) {
if (op->data.nbytes > nor->bouncebuf_size)
op->data.nbytes = nor->bouncebuf_size;
if (op->data.dir == SPI_MEM_DATA_IN) {
rdbuf = op->data.buf.in;
op->data.buf.in = nor->bouncebuf;
} else {
op->data.buf.out = nor->bouncebuf;
memcpy(nor->bouncebuf, buf,
op->data.nbytes);
}
}
ret = spi_mem_adjust_op_size(nor->spimem, op);
if (ret)
return ret;
ret = spi_mem_exec_op(nor->spimem, op);
if (ret)
return ret;
if (usebouncebuf && op->data.dir == SPI_MEM_DATA_IN)
memcpy(rdbuf, nor->bouncebuf, op->data.nbytes);
return op->data.nbytes;
}
/**
* spi_nor_spimem_read_data() - read data from flash's memory region via
* spi-mem
* @nor: pointer to 'struct spi_nor'
* @from: offset to read from
* @len: number of bytes to read
* @buf: pointer to dst buffer
*
* Return: number of bytes read successfully, -errno otherwise
*/
static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from,
size_t len, u8 *buf)
{
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1),
SPI_MEM_OP_ADDR(nor->addr_width, from, 1),
SPI_MEM_OP_DUMMY(nor->read_dummy, 1),
SPI_MEM_OP_DATA_IN(len, buf, 1));
/* get transfer protocols. */
op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto);
op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto);
op.dummy.buswidth = op.addr.buswidth;
op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto);
/* convert the dummy cycles to the number of bytes */
op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;
return spi_nor_spimem_xfer_data(nor, &op);
}
/**
* spi_nor_read_data() - read data from flash memory
* @nor: pointer to 'struct spi_nor'
* @from: offset to read from
* @len: number of bytes to read
* @buf: pointer to dst buffer
*
* Return: number of bytes read successfully, -errno otherwise
*/
static ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
u8 *buf)
{
if (nor->spimem)
return spi_nor_spimem_read_data(nor, from, len, buf);
return nor->read(nor, from, len, buf);
}
/**
* spi_nor_spimem_write_data() - write data to flash memory via
* spi-mem
* @nor: pointer to 'struct spi_nor'
* @to: offset to write to
* @len: number of bytes to write
* @buf: pointer to src buffer
*
* Return: number of bytes written successfully, -errno otherwise
*/
static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to,
size_t len, const u8 *buf)
{
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1),
SPI_MEM_OP_ADDR(nor->addr_width, to, 1),
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_OUT(len, buf, 1));
op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto);
op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto);
op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto);
if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
op.addr.nbytes = 0;
return spi_nor_spimem_xfer_data(nor, &op);
}
/**
* spi_nor_write_data() - write data to flash memory
* @nor: pointer to 'struct spi_nor'
* @to: offset to write to
* @len: number of bytes to write
* @buf: pointer to src buffer
*
* Return: number of bytes written successfully, -errno otherwise
*/
static ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
const u8 *buf)
{
if (nor->spimem)
return spi_nor_spimem_write_data(nor, to, len, buf);
return nor->write(nor, to, len, buf);
}
/*
* Read the status register, returning its value in the location
* Return the status register value.
......@@ -296,15 +396,25 @@ struct flash_info {
static int read_sr(struct spi_nor *nor)
{
int ret;
u8 val;
ret = nor->read_reg(nor, SPINOR_OP_RDSR, &val, 1);
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1));
ret = spi_mem_exec_op(nor->spimem, &op);
} else {
ret = nor->read_reg(nor, SPINOR_OP_RDSR, nor->bouncebuf, 1);
}
if (ret < 0) {
pr_err("error %d reading SR\n", (int) ret);
return ret;
}
return val;
return nor->bouncebuf[0];
}
/*
......@@ -315,15 +425,25 @@ static int read_sr(struct spi_nor *nor)
static int read_fsr(struct spi_nor *nor)
{
int ret;
u8 val;
ret = nor->read_reg(nor, SPINOR_OP_RDFSR, &val, 1);
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1));
ret = spi_mem_exec_op(nor->spimem, &op);
} else {
ret = nor->read_reg(nor, SPINOR_OP_RDFSR, nor->bouncebuf, 1);
}
if (ret < 0) {
pr_err("error %d reading FSR\n", ret);
return ret;
}
return val;
return nor->bouncebuf[0];
}
/*
......@@ -334,15 +454,25 @@ static int read_fsr(struct spi_nor *nor)
static int read_cr(struct spi_nor *nor)
{
int ret;
u8 val;
ret = nor->read_reg(nor, SPINOR_OP_RDCR, &val, 1);
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1));
ret = spi_mem_exec_op(nor->spimem, &op);
} else {
ret = nor->read_reg(nor, SPINOR_OP_RDCR, nor->bouncebuf, 1);
}
if (ret < 0) {
dev_err(nor->dev, "error %d reading CR\n", ret);
return ret;
}
return val;
return nor->bouncebuf[0];
}
/*
......@@ -351,8 +481,18 @@ static int read_cr(struct spi_nor *nor)
*/
static int write_sr(struct spi_nor *nor, u8 val)
{
nor->cmd_buf[0] = val;
return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1);
nor->bouncebuf[0] = val;
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_IN(1, nor->bouncebuf, 1));
return spi_mem_exec_op(nor->spimem, &op);
}
return nor->write_reg(nor, SPINOR_OP_WRSR, nor->bouncebuf, 1);
}
/*
......@@ -361,6 +501,16 @@ static int write_sr(struct spi_nor *nor, u8 val)
*/
static int write_enable(struct spi_nor *nor)
{
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREN, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_NO_DATA);
return spi_mem_exec_op(nor->spimem, &op);
}
return nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0);
}
......@@ -369,6 +519,16 @@ static int write_enable(struct spi_nor *nor)
*/
static int write_disable(struct spi_nor *nor)
{
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRDI, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_NO_DATA);
return spi_mem_exec_op(nor->spimem, &op);
}
return nor->write_reg(nor, SPINOR_OP_WRDI, NULL, 0);
}
......@@ -439,24 +599,12 @@ static u8 spi_nor_convert_3to4_erase(u8 opcode)
static void spi_nor_set_4byte_opcodes(struct spi_nor *nor)
{
/* Do some manufacturer fixups first */
switch (JEDEC_MFR(nor->info)) {
case SNOR_MFR_SPANSION:
/* No small sector erase for 4-byte command set */
nor->erase_opcode = SPINOR_OP_SE;
nor->mtd.erasesize = nor->info->sector_size;
break;
default:
break;
}
nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode);
nor->program_opcode = spi_nor_convert_3to4_program(nor->program_opcode);
nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode);
if (!spi_nor_has_uniform_erase(nor)) {
struct spi_nor_erase_map *map = &nor->erase_map;
struct spi_nor_erase_map *map = &nor->params.erase_map;
struct spi_nor_erase_type *erase;
int i;
......@@ -468,63 +616,131 @@ static void spi_nor_set_4byte_opcodes(struct spi_nor *nor)
}
}
/* Enable/disable 4-byte addressing mode. */
static int set_4byte(struct spi_nor *nor, bool enable)
static int macronix_set_4byte(struct spi_nor *nor, bool enable)
{
int status;
bool need_wren = false;
u8 cmd;
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(enable ?
SPINOR_OP_EN4B :
SPINOR_OP_EX4B,
1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_NO_DATA);
return spi_mem_exec_op(nor->spimem, &op);
}
switch (JEDEC_MFR(nor->info)) {
case SNOR_MFR_ST:
case SNOR_MFR_MICRON:
/* Some Micron need WREN command; all will accept it */
need_wren = true;
/* fall through */
case SNOR_MFR_MACRONIX:
case SNOR_MFR_WINBOND:
if (need_wren)
write_enable(nor);
return nor->write_reg(nor, enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B,
NULL, 0);
}
cmd = enable ? SPINOR_OP_EN4B : SPINOR_OP_EX4B;
status = nor->write_reg(nor, cmd, NULL, 0);
if (need_wren)
write_disable(nor);
static int st_micron_set_4byte(struct spi_nor *nor, bool enable)
{
int ret;
if (!status && !enable &&
JEDEC_MFR(nor->info) == SNOR_MFR_WINBOND) {
/*
* On Winbond W25Q256FV, leaving 4byte mode causes
* the Extended Address Register to be set to 1, so all
* 3-byte-address reads come from the second 16M.
* We must clear the register to enable normal behavior.
*/
write_enable(nor);
nor->cmd_buf[0] = 0;
nor->write_reg(nor, SPINOR_OP_WREAR, nor->cmd_buf, 1);
write_disable(nor);
}
write_enable(nor);
ret = macronix_set_4byte(nor, enable);
write_disable(nor);
return status;
default:
/* Spansion style */
nor->cmd_buf[0] = enable << 7;
return nor->write_reg(nor, SPINOR_OP_BRWR, nor->cmd_buf, 1);
return ret;
}
static int spansion_set_4byte(struct spi_nor *nor, bool enable)
{
nor->bouncebuf[0] = enable << 7;
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_BRWR, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1));
return spi_mem_exec_op(nor->spimem, &op);
}
return nor->write_reg(nor, SPINOR_OP_BRWR, nor->bouncebuf, 1);
}
static int spi_nor_write_ear(struct spi_nor *nor, u8 ear)
{
nor->bouncebuf[0] = ear;
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREAR, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1));
return spi_mem_exec_op(nor->spimem, &op);
}
return nor->write_reg(nor, SPINOR_OP_WREAR, nor->bouncebuf, 1);
}
static int winbond_set_4byte(struct spi_nor *nor, bool enable)
{
int ret;
ret = macronix_set_4byte(nor, enable);
if (ret || enable)
return ret;
/*
* On Winbond W25Q256FV, leaving 4byte mode causes the Extended Address
* Register to be set to 1, so all 3-byte-address reads come from the
* second 16M. We must clear the register to enable normal behavior.
*/
write_enable(nor);
ret = spi_nor_write_ear(nor, 0);
write_disable(nor);
return ret;
}
static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
{
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_XRDSR, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_IN(1, sr, 1));
return spi_mem_exec_op(nor->spimem, &op);
}
return nor->read_reg(nor, SPINOR_OP_XRDSR, sr, 1);
}
static int s3an_sr_ready(struct spi_nor *nor)
{
int ret;
u8 val;
ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1);
ret = spi_nor_xread_sr(nor, nor->bouncebuf);
if (ret < 0) {
dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret);
return ret;
}
return !!(val & XSR_RDY);
return !!(nor->bouncebuf[0] & XSR_RDY);
}
static int spi_nor_clear_sr(struct spi_nor *nor)
{
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLSR, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_NO_DATA);
return spi_mem_exec_op(nor->spimem, &op);
}
return nor->write_reg(nor, SPINOR_OP_CLSR, NULL, 0);
}
static int spi_nor_sr_ready(struct spi_nor *nor)
......@@ -539,13 +755,28 @@ static int spi_nor_sr_ready(struct spi_nor *nor)
else
dev_err(nor->dev, "Programming Error occurred\n");
nor->write_reg(nor, SPINOR_OP_CLSR, NULL, 0);
spi_nor_clear_sr(nor);
return -EIO;
}
return !(sr & SR_WIP);
}
static int spi_nor_clear_fsr(struct spi_nor *nor)
{
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLFSR, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_NO_DATA);
return spi_mem_exec_op(nor->spimem, &op);
}
return nor->write_reg(nor, SPINOR_OP_CLFSR, NULL, 0);
}
static int spi_nor_fsr_ready(struct spi_nor *nor)
{
int fsr = read_fsr(nor);
......@@ -562,7 +793,7 @@ static int spi_nor_fsr_ready(struct spi_nor *nor)
dev_err(nor->dev,
"Attempted to modify a protected sector.\n");
nor->write_reg(nor, SPINOR_OP_CLFSR, NULL, 0);
spi_nor_clear_fsr(nor);
return -EIO;
}
......@@ -630,6 +861,16 @@ static int erase_chip(struct spi_nor *nor)
{
dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd.size >> 10));
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CHIP_ERASE, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_NO_DATA);
return spi_mem_exec_op(nor->spimem, &op);
}
return nor->write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0);
}
......@@ -666,10 +907,9 @@ static void spi_nor_unlock_and_unprep(struct spi_nor *nor, enum spi_nor_ops ops)
* Addr can safely be unsigned int, the biggest S3AN device is smaller than
* 4 MiB.
*/
static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr)
static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
{
unsigned int offset;
unsigned int page;
u32 offset, page;
offset = addr % nor->page_size;
page = addr / nor->page_size;
......@@ -678,30 +918,47 @@ static loff_t spi_nor_s3an_addr_convert(struct spi_nor *nor, unsigned int addr)
return page | offset;
}
static u32 spi_nor_convert_addr(struct spi_nor *nor, loff_t addr)
{
if (!nor->params.convert_addr)
return addr;
return nor->params.convert_addr(nor, addr);
}
/*
* Initiate the erasure of a single sector
*/
static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
{
u8 buf[SPI_NOR_MAX_ADDR_WIDTH];
int i;
if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
addr = spi_nor_s3an_addr_convert(nor, addr);
addr = spi_nor_convert_addr(nor, addr);
if (nor->erase)
return nor->erase(nor, addr);
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(nor->erase_opcode, 1),
SPI_MEM_OP_ADDR(nor->addr_width, addr, 1),
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_NO_DATA);
return spi_mem_exec_op(nor->spimem, &op);
}
/*
* Default implementation, if driver doesn't have a specialized HW
* control
*/
for (i = nor->addr_width - 1; i >= 0; i--) {
buf[i] = addr & 0xff;
nor->bouncebuf[i] = addr & 0xff;
addr >>= 8;
}
return nor->write_reg(nor, nor->erase_opcode, buf, nor->addr_width);
return nor->write_reg(nor, nor->erase_opcode, nor->bouncebuf,
nor->addr_width);
}
/**
......@@ -876,7 +1133,7 @@ static int spi_nor_init_erase_cmd_list(struct spi_nor *nor,
struct list_head *erase_list,
u64 addr, u32 len)
{
const struct spi_nor_erase_map *map = &nor->erase_map;
const struct spi_nor_erase_map *map = &nor->params.erase_map;
const struct spi_nor_erase_type *erase, *prev_erase = NULL;
struct spi_nor_erase_region *region;
struct spi_nor_erase_command *cmd = NULL;
......@@ -1349,6 +1606,12 @@ static int stm_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
return stm_is_locked_sr(nor, ofs, len, status);
}
static const struct spi_nor_locking_ops stm_locking_ops = {
.lock = stm_lock,
.unlock = stm_unlock,
.is_locked = stm_is_locked,
};
static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
struct spi_nor *nor = mtd_to_spi_nor(mtd);
......@@ -1358,7 +1621,7 @@ static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
if (ret)
return ret;
ret = nor->flash_lock(nor, ofs, len);
ret = nor->params.locking_ops->lock(nor, ofs, len);
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_UNLOCK);
return ret;
......@@ -1373,7 +1636,7 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
if (ret)
return ret;
ret = nor->flash_unlock(nor, ofs, len);
ret = nor->params.locking_ops->unlock(nor, ofs, len);
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
return ret;
......@@ -1388,7 +1651,7 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
if (ret)
return ret;
ret = nor->flash_is_locked(nor, ofs, len);
ret = nor->params.locking_ops->is_locked(nor, ofs, len);
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
return ret;
......@@ -1406,7 +1669,18 @@ static int write_sr_cr(struct spi_nor *nor, u8 *sr_cr)
write_enable(nor);
ret = nor->write_reg(nor, SPINOR_OP_WRSR, sr_cr, 2);
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_OUT(2, sr_cr, 1));
ret = spi_mem_exec_op(nor->spimem, &op);
} else {
ret = nor->write_reg(nor, SPINOR_OP_WRSR, sr_cr, 2);
}
if (ret < 0) {
dev_err(nor->dev,
"error while writing configuration register\n");
......@@ -1485,9 +1759,11 @@ static int macronix_quad_enable(struct spi_nor *nor)
*/
static int spansion_quad_enable(struct spi_nor *nor)
{
u8 sr_cr[2] = {0, CR_QUAD_EN_SPAN};
u8 *sr_cr = nor->bouncebuf;
int ret;
sr_cr[0] = 0;
sr_cr[1] = CR_QUAD_EN_SPAN;
ret = write_sr_cr(nor, sr_cr);
if (ret)
return ret;
......@@ -1517,7 +1793,7 @@ static int spansion_quad_enable(struct spi_nor *nor)
*/
static int spansion_no_read_cr_quad_enable(struct spi_nor *nor)
{
u8 sr_cr[2];
u8 *sr_cr = nor->bouncebuf;
int ret;
/* Keep the current value of the Status Register. */
......@@ -1548,7 +1824,7 @@ static int spansion_no_read_cr_quad_enable(struct spi_nor *nor)
static int spansion_read_cr_quad_enable(struct spi_nor *nor)
{
struct device *dev = nor->dev;
u8 sr_cr[2];
u8 *sr_cr = nor->bouncebuf;
int ret;
/* Check current Quad Enable bit value. */
......@@ -1585,6 +1861,36 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor)
return 0;
}
static int spi_nor_write_sr2(struct spi_nor *nor, u8 *sr2)
{
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR2, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_OUT(1, sr2, 1));
return spi_mem_exec_op(nor->spimem, &op);
}
return nor->write_reg(nor, SPINOR_OP_WRSR2, sr2, 1);
}
static int spi_nor_read_sr2(struct spi_nor *nor, u8 *sr2)
{
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR2, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_IN(1, sr2, 1));
return spi_mem_exec_op(nor->spimem, &op);
}
return nor->read_reg(nor, SPINOR_OP_RDSR2, sr2, 1);
}
/**
* sr2_bit7_quad_enable() - set QE bit in Status Register 2.
* @nor: pointer to a 'struct spi_nor'
......@@ -1599,22 +1905,22 @@ static int spansion_read_cr_quad_enable(struct spi_nor *nor)
*/
static int sr2_bit7_quad_enable(struct spi_nor *nor)
{
u8 sr2;
u8 *sr2 = nor->bouncebuf;
int ret;
/* Check current Quad Enable bit value. */
ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1);
ret = spi_nor_read_sr2(nor, sr2);
if (ret)
return ret;
if (sr2 & SR2_QUAD_EN_BIT7)
if (*sr2 & SR2_QUAD_EN_BIT7)
return 0;
/* Update the Quad Enable bit. */
sr2 |= SR2_QUAD_EN_BIT7;
*sr2 |= SR2_QUAD_EN_BIT7;
write_enable(nor);
ret = nor->write_reg(nor, SPINOR_OP_WRSR2, &sr2, 1);
ret = spi_nor_write_sr2(nor, sr2);
if (ret < 0) {
dev_err(nor->dev, "error while writing status register 2\n");
return -EINVAL;
......@@ -1627,8 +1933,8 @@ static int sr2_bit7_quad_enable(struct spi_nor *nor)
}
/* Read back and check it. */
ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1);
if (!(ret > 0 && (sr2 & SR2_QUAD_EN_BIT7))) {
ret = spi_nor_read_sr2(nor, sr2);
if (!(ret > 0 && (*sr2 & SR2_QUAD_EN_BIT7))) {
dev_err(nor->dev, "SR2 Quad bit not set\n");
return -EINVAL;
}
......@@ -1687,7 +1993,7 @@ static int spi_nor_spansion_clear_sr_bp(struct spi_nor *nor)
{
int ret;
u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
u8 sr_cr[2] = {0};
u8 *sr_cr = nor->bouncebuf;
/* Check current Quad Enable bit value. */
ret = read_cr(nor);
......@@ -1822,6 +2128,21 @@ static struct spi_nor_fixups mx25l25635_fixups = {
.post_bfpt = mx25l25635_post_bfpt_fixups,
};
static void gd25q256_default_init(struct spi_nor *nor)
{
/*
* Some manufacturer like GigaDevice may use different
* bit to set QE on different memories, so the MFR can't
* indicate the quad_enable method for this case, we need
* to set it in the default_init fixup hook.
*/
nor->params.quad_enable = macronix_quad_enable;
}
static struct spi_nor_fixups gd25q256_fixups = {
.default_init = gd25q256_default_init,
};
/* NOTE: double check command sets and memory organization when you add
* more nor chips. This current list focusses on newer chips, which
* have been converging on command sets which including JEDEC ID.
......@@ -1914,7 +2235,7 @@ static const struct flash_info spi_nor_ids[] = {
"gd25q256", INFO(0xc84019, 0, 64 * 1024, 512,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
.quad_enable = macronix_quad_enable,
.fixups = &gd25q256_fixups,
},
/* Intel/Numonyx -- xxxs33b */
......@@ -1988,13 +2309,16 @@ static const struct flash_info spi_nor_ids[] = {
{ "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) },
{ "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
{ "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
{ "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
{ "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
{ "mt25ql02g", INFO(0x20ba22, 0, 64 * 1024, 4096,
SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
NO_CHIP_ERASE) },
{ "mt25qu512a (n25q512a)", INFO(0x20bb20, 0, 64 * 1024, 1024,
SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ |
SPI_NOR_4B_OPCODES) },
{ "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
/* Micron */
......@@ -2003,6 +2327,9 @@ static const struct flash_info spi_nor_ids[] = {
SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
SPI_NOR_4B_OPCODES)
},
{ "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048,
SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
SPI_NOR_4B_OPCODES) },
/* PMC */
{ "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
......@@ -2022,7 +2349,7 @@ static const struct flash_info spi_nor_ids[] = {
{ "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | USE_CLSR) },
SPI_NOR_HAS_LOCK | USE_CLSR) },
{ "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
{ "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
{ "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
......@@ -2060,6 +2387,8 @@ static const struct flash_info spi_nor_ids[] = {
{ "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K) },
{ "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
{ "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
{ "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32, SECT_4K |
SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
/* ST Microelectronics -- newer production may have feature updates */
......@@ -2151,6 +2480,8 @@ static const struct flash_info spi_nor_ids[] = {
{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512,
SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
......@@ -2177,10 +2508,21 @@ static const struct flash_info spi_nor_ids[] = {
static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
{
int tmp;
u8 id[SPI_NOR_MAX_ID_LEN];
u8 *id = nor->bouncebuf;
const struct flash_info *info;
tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
if (nor->spimem) {
struct spi_mem_op op =
SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_IN(SPI_NOR_MAX_ID_LEN, id, 1));
tmp = spi_mem_exec_op(nor->spimem, &op);
} else {
tmp = nor->read_reg(nor, SPINOR_OP_RDID, id,
SPI_NOR_MAX_ID_LEN);
}
if (tmp < 0) {
dev_err(nor->dev, "error %d reading JEDEC ID\n", tmp);
return ERR_PTR(tmp);
......@@ -2213,10 +2555,9 @@ static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
while (len) {
loff_t addr = from;
if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
addr = spi_nor_s3an_addr_convert(nor, addr);
addr = spi_nor_convert_addr(nor, addr);
ret = nor->read(nor, addr, len, buf);
ret = spi_nor_read_data(nor, addr, len, buf);
if (ret == 0) {
/* We shouldn't see 0-length reads */
ret = -EIO;
......@@ -2261,7 +2602,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
nor->program_opcode = SPINOR_OP_BP;
/* write one byte. */
ret = nor->write(nor, to, 1, buf);
ret = spi_nor_write_data(nor, to, 1, buf);
if (ret < 0)
goto sst_write_err;
WARN(ret != 1, "While writing 1 byte written %i bytes\n",
......@@ -2277,7 +2618,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
nor->program_opcode = SPINOR_OP_AAI_WP;
/* write two bytes. */
ret = nor->write(nor, to, 2, buf + actual);
ret = spi_nor_write_data(nor, to, 2, buf + actual);
if (ret < 0)
goto sst_write_err;
WARN(ret != 2, "While writing 2 bytes written %i bytes\n",
......@@ -2300,7 +2641,7 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
write_enable(nor);
nor->program_opcode = SPINOR_OP_BP;
ret = nor->write(nor, to, 1, buf + actual);
ret = spi_nor_write_data(nor, to, 1, buf + actual);
if (ret < 0)
goto sst_write_err;
WARN(ret != 1, "While writing 1 byte written %i bytes\n",
......@@ -2358,11 +2699,10 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
page_remain = min_t(size_t,
nor->page_size - page_offset, len - i);
if (nor->flags & SNOR_F_S3AN_ADDR_DEFAULT)
addr = spi_nor_s3an_addr_convert(nor, addr);
addr = spi_nor_convert_addr(nor, addr);
write_enable(nor);
ret = nor->write(nor, addr, page_remain, buf + i);
ret = spi_nor_write_data(nor, addr, page_remain, buf + i);
if (ret < 0)
goto write_err;
written = ret;
......@@ -2381,8 +2721,10 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
static int spi_nor_check(struct spi_nor *nor)
{
if (!nor->dev || !nor->read || !nor->write ||
!nor->read_reg || !nor->write_reg) {
if (!nor->dev ||
(!nor->spimem &&
(!nor->read || !nor->write || !nor->read_reg ||
!nor->write_reg))) {
pr_err("spi-nor: please fill all the necessary fields!\n");
return -EINVAL;
}
......@@ -2390,12 +2732,12 @@ static int spi_nor_check(struct spi_nor *nor)
return 0;
}
static int s3an_nor_scan(struct spi_nor *nor)
static int s3an_nor_setup(struct spi_nor *nor,
const struct spi_nor_hwcaps *hwcaps)
{
int ret;
u8 val;
ret = nor->read_reg(nor, SPINOR_OP_XRDSR, &val, 1);
ret = spi_nor_xread_sr(nor, nor->bouncebuf);
if (ret < 0) {
dev_err(nor->dev, "error %d reading XRDSR\n", (int) ret);
return ret;
......@@ -2417,7 +2759,7 @@ static int s3an_nor_scan(struct spi_nor *nor)
* The current addressing mode can be read from the XRDSR register
* and should not be changed, because is a destructive operation.
*/
if (val & XSR_PAGESIZE) {
if (nor->bouncebuf[0] & XSR_PAGESIZE) {
/* Flash in Power of 2 mode */
nor->page_size = (nor->page_size == 264) ? 256 : 512;
nor->mtd.writebufsize = nor->page_size;
......@@ -2425,7 +2767,8 @@ static int s3an_nor_scan(struct spi_nor *nor)
nor->mtd.erasesize = 8 * nor->page_size;
} else {
/* Flash in Default addressing mode */
nor->flags |= SNOR_F_S3AN_ADDR_DEFAULT;
nor->params.convert_addr = s3an_convert_addr;
nor->mtd.erasesize = nor->info->sector_size;
}
return 0;
......@@ -2525,11 +2868,11 @@ static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf)
int ret;
while (len) {
ret = nor->read(nor, addr, len, buf);
if (!ret || ret > len)
return -EIO;
ret = spi_nor_read_data(nor, addr, len, buf);
if (ret < 0)
return ret;
if (!ret || ret > len)
return -EIO;
buf += ret;
addr += ret;
......@@ -2574,6 +2917,126 @@ static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr,
return ret;
}
/**
* spi_nor_spimem_check_op - check if the operation is supported
* by controller
*@nor: pointer to a 'struct spi_nor'
*@op: pointer to op template to be checked
*
* Returns 0 if operation is supported, -ENOTSUPP otherwise.
*/
static int spi_nor_spimem_check_op(struct spi_nor *nor,
struct spi_mem_op *op)
{
/*
* First test with 4 address bytes. The opcode itself might
* be a 3B addressing opcode but we don't care, because
* SPI controller implementation should not check the opcode,
* but just the sequence.
*/
op->addr.nbytes = 4;
if (!spi_mem_supports_op(nor->spimem, op)) {
if (nor->mtd.size > SZ_16M)
return -ENOTSUPP;
/* If flash size <= 16MB, 3 address bytes are sufficient */
op->addr.nbytes = 3;
if (!spi_mem_supports_op(nor->spimem, op))
return -ENOTSUPP;
}
return 0;
}
/**
* spi_nor_spimem_check_readop - check if the read op is supported
* by controller
*@nor: pointer to a 'struct spi_nor'
*@read: pointer to op template to be checked
*
* Returns 0 if operation is supported, -ENOTSUPP otherwise.
*/
static int spi_nor_spimem_check_readop(struct spi_nor *nor,
const struct spi_nor_read_command *read)
{
struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(read->opcode, 1),
SPI_MEM_OP_ADDR(3, 0, 1),
SPI_MEM_OP_DUMMY(0, 1),
SPI_MEM_OP_DATA_IN(0, NULL, 1));
op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(read->proto);
op.addr.buswidth = spi_nor_get_protocol_addr_nbits(read->proto);
op.data.buswidth = spi_nor_get_protocol_data_nbits(read->proto);
op.dummy.buswidth = op.addr.buswidth;
op.dummy.nbytes = (read->num_mode_clocks + read->num_wait_states) *
op.dummy.buswidth / 8;
return spi_nor_spimem_check_op(nor, &op);
}
/**
* spi_nor_spimem_check_pp - check if the page program op is supported
* by controller
*@nor: pointer to a 'struct spi_nor'
*@pp: pointer to op template to be checked
*
* Returns 0 if operation is supported, -ENOTSUPP otherwise.
*/
static int spi_nor_spimem_check_pp(struct spi_nor *nor,
const struct spi_nor_pp_command *pp)
{
struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(pp->opcode, 1),
SPI_MEM_OP_ADDR(3, 0, 1),
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_OUT(0, NULL, 1));
op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(pp->proto);
op.addr.buswidth = spi_nor_get_protocol_addr_nbits(pp->proto);
op.data.buswidth = spi_nor_get_protocol_data_nbits(pp->proto);
return spi_nor_spimem_check_op(nor, &op);
}
/**
* spi_nor_spimem_adjust_hwcaps - Find optimal Read/Write protocol
* based on SPI controller capabilities
* @nor: pointer to a 'struct spi_nor'
* @hwcaps: pointer to resulting capabilities after adjusting
* according to controller and flash's capability
*/
static void
spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, u32 *hwcaps)
{
struct spi_nor_flash_parameter *params = &nor->params;
unsigned int cap;
/* DTR modes are not supported yet, mask them all. */
*hwcaps &= ~SNOR_HWCAPS_DTR;
/* X-X-X modes are not supported yet, mask them all. */
*hwcaps &= ~SNOR_HWCAPS_X_X_X;
for (cap = 0; cap < sizeof(*hwcaps) * BITS_PER_BYTE; cap++) {
int rdidx, ppidx;
if (!(*hwcaps & BIT(cap)))
continue;
rdidx = spi_nor_hwcaps_read2cmd(BIT(cap));
if (rdidx >= 0 &&
spi_nor_spimem_check_readop(nor, &params->reads[rdidx]))
*hwcaps &= ~BIT(cap);
ppidx = spi_nor_hwcaps_pp2cmd(BIT(cap));
if (ppidx < 0)
continue;
if (spi_nor_spimem_check_pp(nor,
&params->page_programs[ppidx]))
*hwcaps &= ~BIT(cap);
}
}
/**
* spi_nor_read_sfdp_dma_unsafe() - read Serial Flash Discoverable Parameters.
* @nor: pointer to a 'struct spi_nor'
......@@ -2892,7 +3355,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
const struct sfdp_parameter_header *bfpt_header,
struct spi_nor_flash_parameter *params)
{
struct spi_nor_erase_map *map = &nor->erase_map;
struct spi_nor_erase_map *map = &params->erase_map;
struct spi_nor_erase_type *erase_type = map->erase_type;
struct sfdp_bfpt bfpt;
size_t len;
......@@ -2973,7 +3436,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
* Erase Types defined in the bfpt table.
*/
erase_mask = 0;
memset(&nor->erase_map, 0, sizeof(nor->erase_map));
memset(&params->erase_map, 0, sizeof(params->erase_map));
for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) {
const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i];
u32 erasesize;
......@@ -3248,14 +3711,18 @@ spi_nor_region_check_overlay(struct spi_nor_erase_region *region,
/**
* spi_nor_init_non_uniform_erase_map() - initialize the non-uniform erase map
* @nor: pointer to a 'struct spi_nor'
* @params: pointer to a duplicate 'struct spi_nor_flash_parameter' that is
* used for storing SFDP parsed data
* @smpt: pointer to the sector map parameter table
*
* Return: 0 on success, -errno otherwise.
*/
static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
const u32 *smpt)
static int
spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
struct spi_nor_flash_parameter *params,
const u32 *smpt)
{
struct spi_nor_erase_map *map = &nor->erase_map;
struct spi_nor_erase_map *map = &params->erase_map;
struct spi_nor_erase_type *erase = map->erase_type;
struct spi_nor_erase_region *region;
u64 offset;
......@@ -3334,6 +3801,8 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
* spi_nor_parse_smpt() - parse Sector Map Parameter Table
* @nor: pointer to a 'struct spi_nor'
* @smpt_header: sector map parameter table header
* @params: pointer to a duplicate 'struct spi_nor_flash_parameter'
* that is used for storing SFDP parsed data
*
* This table is optional, but when available, we parse it to identify the
* location and size of sectors within the main data array of the flash memory
......@@ -3342,7 +3811,8 @@ static int spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
* Return: 0 on success, -errno otherwise.
*/
static int spi_nor_parse_smpt(struct spi_nor *nor,
const struct sfdp_parameter_header *smpt_header)
const struct sfdp_parameter_header *smpt_header,
struct spi_nor_flash_parameter *params)
{
const u32 *sector_map;
u32 *smpt;
......@@ -3371,11 +3841,11 @@ static int spi_nor_parse_smpt(struct spi_nor *nor,
goto out;
}
ret = spi_nor_init_non_uniform_erase_map(nor, sector_map);
ret = spi_nor_init_non_uniform_erase_map(nor, params, sector_map);
if (ret)
goto out;
spi_nor_regions_sort_erase_types(&nor->erase_map);
spi_nor_regions_sort_erase_types(&params->erase_map);
/* fall through */
out:
kfree(smpt);
......@@ -3431,7 +3901,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
{ 0u /* not used */, BIT(12) },
};
struct spi_nor_pp_command *params_pp = params->page_programs;
struct spi_nor_erase_map *map = &nor->erase_map;
struct spi_nor_erase_map *map = &params->erase_map;
struct spi_nor_erase_type *erase_type = map->erase_type;
u32 *dwords;
size_t len;
......@@ -3453,7 +3923,7 @@ static int spi_nor_parse_4bait(struct spi_nor *nor,
addr = SFDP_PARAM_HEADER_PTP(param_header);
ret = spi_nor_read_sfdp(nor, addr, len, dwords);
if (ret)
return ret;
goto out;
/* Fix endianness of the 4BAIT DWORDs. */
for (i = 0; i < SFDP_4BAIT_DWORD_MAX; i++)
......@@ -3661,7 +4131,7 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor,
switch (SFDP_PARAM_HEADER_ID(param_header)) {
case SFDP_SECTOR_MAP_ID:
err = spi_nor_parse_smpt(nor, param_header);
err = spi_nor_parse_smpt(nor, param_header, params);
break;
case SFDP_4BAIT_ID:
......@@ -3690,137 +4160,11 @@ static int spi_nor_parse_sfdp(struct spi_nor *nor,
return err;
}
static int spi_nor_init_params(struct spi_nor *nor,
struct spi_nor_flash_parameter *params)
static int spi_nor_select_read(struct spi_nor *nor,
u32 shared_hwcaps)
{
struct spi_nor_erase_map *map = &nor->erase_map;
const struct flash_info *info = nor->info;
u8 i, erase_mask;
/* Set legacy flash parameters as default. */
memset(params, 0, sizeof(*params));
/* Set SPI NOR sizes. */
params->size = (u64)info->sector_size * info->n_sectors;
params->page_size = info->page_size;
/* (Fast) Read settings. */
params->hwcaps.mask |= SNOR_HWCAPS_READ;
spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ],
0, 0, SPINOR_OP_READ,
SNOR_PROTO_1_1_1);
if (!(info->flags & SPI_NOR_NO_FR)) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_FAST],
0, 8, SPINOR_OP_READ_FAST,
SNOR_PROTO_1_1_1);
}
if (info->flags & SPI_NOR_DUAL_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_2],
0, 8, SPINOR_OP_READ_1_1_2,
SNOR_PROTO_1_1_2);
}
if (info->flags & SPI_NOR_QUAD_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_4],
0, 8, SPINOR_OP_READ_1_1_4,
SNOR_PROTO_1_1_4);
}
if (info->flags & SPI_NOR_OCTAL_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_8],
0, 8, SPINOR_OP_READ_1_1_8,
SNOR_PROTO_1_1_8);
}
/* Page Program settings. */
params->hwcaps.mask |= SNOR_HWCAPS_PP;
spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP],
SPINOR_OP_PP, SNOR_PROTO_1_1_1);
/*
* Sector Erase settings. Sort Erase Types in ascending order, with the
* smallest erase size starting at BIT(0).
*/
erase_mask = 0;
i = 0;
if (info->flags & SECT_4K_PMC) {
erase_mask |= BIT(i);
spi_nor_set_erase_type(&map->erase_type[i], 4096u,
SPINOR_OP_BE_4K_PMC);
i++;
} else if (info->flags & SECT_4K) {
erase_mask |= BIT(i);
spi_nor_set_erase_type(&map->erase_type[i], 4096u,
SPINOR_OP_BE_4K);
i++;
}
erase_mask |= BIT(i);
spi_nor_set_erase_type(&map->erase_type[i], info->sector_size,
SPINOR_OP_SE);
spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
/* Select the procedure to set the Quad Enable bit. */
if (params->hwcaps.mask & (SNOR_HWCAPS_READ_QUAD |
SNOR_HWCAPS_PP_QUAD)) {
switch (JEDEC_MFR(info)) {
case SNOR_MFR_MACRONIX:
params->quad_enable = macronix_quad_enable;
break;
case SNOR_MFR_ST:
case SNOR_MFR_MICRON:
break;
default:
/* Kept only for backward compatibility purpose. */
params->quad_enable = spansion_quad_enable;
break;
}
/*
* Some manufacturer like GigaDevice may use different
* bit to set QE on different memories, so the MFR can't
* indicate the quad_enable method for this case, we need
* set it in flash info list.
*/
if (info->quad_enable)
params->quad_enable = info->quad_enable;
}
if ((info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) &&
!(info->flags & SPI_NOR_SKIP_SFDP)) {
struct spi_nor_flash_parameter sfdp_params;
struct spi_nor_erase_map prev_map;
memcpy(&sfdp_params, params, sizeof(sfdp_params));
memcpy(&prev_map, &nor->erase_map, sizeof(prev_map));
if (spi_nor_parse_sfdp(nor, &sfdp_params)) {
nor->addr_width = 0;
nor->flags &= ~SNOR_F_4B_OPCODES;
/* restore previous erase map */
memcpy(&nor->erase_map, &prev_map,
sizeof(nor->erase_map));
} else {
memcpy(params, &sfdp_params, sizeof(*params));
}
}
return 0;
}
static int spi_nor_select_read(struct spi_nor *nor,
const struct spi_nor_flash_parameter *params,
u32 shared_hwcaps)
{
int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_READ_MASK) - 1;
const struct spi_nor_read_command *read;
int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_READ_MASK) - 1;
const struct spi_nor_read_command *read;
if (best_match < 0)
return -EINVAL;
......@@ -3829,7 +4173,7 @@ static int spi_nor_select_read(struct spi_nor *nor,
if (cmd < 0)
return -EINVAL;
read = &params->reads[cmd];
read = &nor->params.reads[cmd];
nor->read_opcode = read->opcode;
nor->read_proto = read->proto;
......@@ -3848,7 +4192,6 @@ static int spi_nor_select_read(struct spi_nor *nor,
}
static int spi_nor_select_pp(struct spi_nor *nor,
const struct spi_nor_flash_parameter *params,
u32 shared_hwcaps)
{
int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_PP_MASK) - 1;
......@@ -3861,7 +4204,7 @@ static int spi_nor_select_pp(struct spi_nor *nor,
if (cmd < 0)
return -EINVAL;
pp = &params->page_programs[cmd];
pp = &nor->params.page_programs[cmd];
nor->program_opcode = pp->opcode;
nor->write_proto = pp->proto;
return 0;
......@@ -3920,11 +4263,12 @@ spi_nor_select_uniform_erase(struct spi_nor_erase_map *map,
return erase;
}
static int spi_nor_select_erase(struct spi_nor *nor, u32 wanted_size)
static int spi_nor_select_erase(struct spi_nor *nor)
{
struct spi_nor_erase_map *map = &nor->erase_map;
struct spi_nor_erase_map *map = &nor->params.erase_map;
const struct spi_nor_erase_type *erase = NULL;
struct mtd_info *mtd = &nor->mtd;
u32 wanted_size = nor->info->sector_size;
int i;
/*
......@@ -3967,12 +4311,11 @@ static int spi_nor_select_erase(struct spi_nor *nor, u32 wanted_size)
return 0;
}
static int spi_nor_setup(struct spi_nor *nor,
const struct spi_nor_flash_parameter *params,
const struct spi_nor_hwcaps *hwcaps)
static int spi_nor_default_setup(struct spi_nor *nor,
const struct spi_nor_hwcaps *hwcaps)
{
struct spi_nor_flash_parameter *params = &nor->params;
u32 ignored_mask, shared_mask;
bool enable_quad_io;
int err;
/*
......@@ -3981,20 +4324,29 @@ static int spi_nor_setup(struct spi_nor *nor,
*/
shared_mask = hwcaps->mask & params->hwcaps.mask;
/* SPI n-n-n protocols are not supported yet. */
ignored_mask = (SNOR_HWCAPS_READ_2_2_2 |
SNOR_HWCAPS_READ_4_4_4 |
SNOR_HWCAPS_READ_8_8_8 |
SNOR_HWCAPS_PP_4_4_4 |
SNOR_HWCAPS_PP_8_8_8);
if (shared_mask & ignored_mask) {
dev_dbg(nor->dev,
"SPI n-n-n protocols are not supported yet.\n");
shared_mask &= ~ignored_mask;
if (nor->spimem) {
/*
* When called from spi_nor_probe(), all caps are set and we
* need to discard some of them based on what the SPI
* controller actually supports (using spi_mem_supports_op()).
*/
spi_nor_spimem_adjust_hwcaps(nor, &shared_mask);
} else {
/*
* SPI n-n-n protocols are not supported when the SPI
* controller directly implements the spi_nor interface.
* Yet another reason to switch to spi-mem.
*/
ignored_mask = SNOR_HWCAPS_X_X_X;
if (shared_mask & ignored_mask) {
dev_dbg(nor->dev,
"SPI n-n-n protocols are not supported.\n");
shared_mask &= ~ignored_mask;
}
}
/* Select the (Fast) Read command. */
err = spi_nor_select_read(nor, params, shared_mask);
err = spi_nor_select_read(nor, shared_mask);
if (err) {
dev_err(nor->dev,
"can't select read settings supported by both the SPI controller and memory.\n");
......@@ -4002,7 +4354,7 @@ static int spi_nor_setup(struct spi_nor *nor,
}
/* Select the Page Program command. */
err = spi_nor_select_pp(nor, params, shared_mask);
err = spi_nor_select_pp(nor, shared_mask);
if (err) {
dev_err(nor->dev,
"can't select write settings supported by both the SPI controller and memory.\n");
......@@ -4010,30 +4362,325 @@ static int spi_nor_setup(struct spi_nor *nor,
}
/* Select the Sector Erase command. */
err = spi_nor_select_erase(nor, nor->info->sector_size);
err = spi_nor_select_erase(nor);
if (err) {
dev_err(nor->dev,
"can't select erase settings supported by both the SPI controller and memory.\n");
return err;
}
/* Enable Quad I/O if needed. */
enable_quad_io = (spi_nor_get_protocol_width(nor->read_proto) == 4 ||
spi_nor_get_protocol_width(nor->write_proto) == 4);
if (enable_quad_io && params->quad_enable)
nor->quad_enable = params->quad_enable;
else
nor->quad_enable = NULL;
return 0;
}
static int spi_nor_setup(struct spi_nor *nor,
const struct spi_nor_hwcaps *hwcaps)
{
if (!nor->params.setup)
return 0;
return nor->params.setup(nor, hwcaps);
}
static void macronix_set_default_init(struct spi_nor *nor)
{
nor->params.quad_enable = macronix_quad_enable;
nor->params.set_4byte = macronix_set_4byte;
}
static void st_micron_set_default_init(struct spi_nor *nor)
{
nor->flags |= SNOR_F_HAS_LOCK;
nor->params.quad_enable = NULL;
nor->params.set_4byte = st_micron_set_4byte;
}
static void winbond_set_default_init(struct spi_nor *nor)
{
nor->params.set_4byte = winbond_set_4byte;
}
/**
* spi_nor_manufacturer_init_params() - Initialize the flash's parameters and
* settings based on MFR register and ->default_init() hook.
* @nor: pointer to a 'struct spi-nor'.
*/
static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
{
/* Init flash parameters based on MFR */
switch (JEDEC_MFR(nor->info)) {
case SNOR_MFR_MACRONIX:
macronix_set_default_init(nor);
break;
case SNOR_MFR_ST:
case SNOR_MFR_MICRON:
st_micron_set_default_init(nor);
break;
case SNOR_MFR_WINBOND:
winbond_set_default_init(nor);
break;
default:
break;
}
if (nor->info->fixups && nor->info->fixups->default_init)
nor->info->fixups->default_init(nor);
}
/**
* spi_nor_sfdp_init_params() - Initialize the flash's parameters and settings
* based on JESD216 SFDP standard.
* @nor: pointer to a 'struct spi-nor'.
*
* The method has a roll-back mechanism: in case the SFDP parsing fails, the
* legacy flash parameters and settings will be restored.
*/
static void spi_nor_sfdp_init_params(struct spi_nor *nor)
{
struct spi_nor_flash_parameter sfdp_params;
memcpy(&sfdp_params, &nor->params, sizeof(sfdp_params));
if (spi_nor_parse_sfdp(nor, &sfdp_params)) {
nor->addr_width = 0;
nor->flags &= ~SNOR_F_4B_OPCODES;
} else {
memcpy(&nor->params, &sfdp_params, sizeof(nor->params));
}
}
/**
* spi_nor_info_init_params() - Initialize the flash's parameters and settings
* based on nor->info data.
* @nor: pointer to a 'struct spi-nor'.
*/
static void spi_nor_info_init_params(struct spi_nor *nor)
{
struct spi_nor_flash_parameter *params = &nor->params;
struct spi_nor_erase_map *map = &params->erase_map;
const struct flash_info *info = nor->info;
struct device_node *np = spi_nor_get_flash_node(nor);
u8 i, erase_mask;
/* Initialize legacy flash parameters and settings. */
params->quad_enable = spansion_quad_enable;
params->set_4byte = spansion_set_4byte;
params->setup = spi_nor_default_setup;
/* Set SPI NOR sizes. */
params->size = (u64)info->sector_size * info->n_sectors;
params->page_size = info->page_size;
if (!(info->flags & SPI_NOR_NO_FR)) {
/* Default to Fast Read for DT and non-DT platform devices. */
params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
/* Mask out Fast Read if not requested at DT instantiation. */
if (np && !of_property_read_bool(np, "m25p,fast-read"))
params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
}
/* (Fast) Read settings. */
params->hwcaps.mask |= SNOR_HWCAPS_READ;
spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ],
0, 0, SPINOR_OP_READ,
SNOR_PROTO_1_1_1);
if (params->hwcaps.mask & SNOR_HWCAPS_READ_FAST)
spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_FAST],
0, 8, SPINOR_OP_READ_FAST,
SNOR_PROTO_1_1_1);
if (info->flags & SPI_NOR_DUAL_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_2],
0, 8, SPINOR_OP_READ_1_1_2,
SNOR_PROTO_1_1_2);
}
if (info->flags & SPI_NOR_QUAD_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_4],
0, 8, SPINOR_OP_READ_1_1_4,
SNOR_PROTO_1_1_4);
}
if (info->flags & SPI_NOR_OCTAL_READ) {
params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
spi_nor_set_read_settings(&params->reads[SNOR_CMD_READ_1_1_8],
0, 8, SPINOR_OP_READ_1_1_8,
SNOR_PROTO_1_1_8);
}
/* Page Program settings. */
params->hwcaps.mask |= SNOR_HWCAPS_PP;
spi_nor_set_pp_settings(&params->page_programs[SNOR_CMD_PP],
SPINOR_OP_PP, SNOR_PROTO_1_1_1);
/*
* Sector Erase settings. Sort Erase Types in ascending order, with the
* smallest erase size starting at BIT(0).
*/
erase_mask = 0;
i = 0;
if (info->flags & SECT_4K_PMC) {
erase_mask |= BIT(i);
spi_nor_set_erase_type(&map->erase_type[i], 4096u,
SPINOR_OP_BE_4K_PMC);
i++;
} else if (info->flags & SECT_4K) {
erase_mask |= BIT(i);
spi_nor_set_erase_type(&map->erase_type[i], 4096u,
SPINOR_OP_BE_4K);
i++;
}
erase_mask |= BIT(i);
spi_nor_set_erase_type(&map->erase_type[i], info->sector_size,
SPINOR_OP_SE);
spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
}
static void spansion_post_sfdp_fixups(struct spi_nor *nor)
{
struct mtd_info *mtd = &nor->mtd;
if (mtd->size <= SZ_16M)
return;
nor->flags |= SNOR_F_4B_OPCODES;
/* No small sector erase for 4-byte command set */
nor->erase_opcode = SPINOR_OP_SE;
nor->mtd.erasesize = nor->info->sector_size;
}
static void s3an_post_sfdp_fixups(struct spi_nor *nor)
{
nor->params.setup = s3an_nor_setup;
}
/**
* spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings
* after SFDP has been parsed (is also called for SPI NORs that do not
* support RDSFDP).
* @nor: pointer to a 'struct spi_nor'
*
* Typically used to tweak various parameters that could not be extracted by
* other means (i.e. when information provided by the SFDP/flash_info tables
* are incomplete or wrong).
*/
static void spi_nor_post_sfdp_fixups(struct spi_nor *nor)
{
switch (JEDEC_MFR(nor->info)) {
case SNOR_MFR_SPANSION:
spansion_post_sfdp_fixups(nor);
break;
default:
break;
}
if (nor->info->flags & SPI_S3AN)
s3an_post_sfdp_fixups(nor);
if (nor->info->fixups && nor->info->fixups->post_sfdp)
nor->info->fixups->post_sfdp(nor);
}
/**
* spi_nor_late_init_params() - Late initialization of default flash parameters.
* @nor: pointer to a 'struct spi_nor'
*
* Used to set default flash parameters and settings when the ->default_init()
* hook or the SFDP parser let voids.
*/
static void spi_nor_late_init_params(struct spi_nor *nor)
{
/*
* NOR protection support. When locking_ops are not provided, we pick
* the default ones.
*/
if (nor->flags & SNOR_F_HAS_LOCK && !nor->params.locking_ops)
nor->params.locking_ops = &stm_locking_ops;
}
/**
* spi_nor_init_params() - Initialize the flash's parameters and settings.
* @nor: pointer to a 'struct spi-nor'.
*
* The flash parameters and settings are initialized based on a sequence of
* calls that are ordered by priority:
*
* 1/ Default flash parameters initialization. The initializations are done
* based on nor->info data:
* spi_nor_info_init_params()
*
* which can be overwritten by:
* 2/ Manufacturer flash parameters initialization. The initializations are
* done based on MFR register, or when the decisions can not be done solely
* based on MFR, by using specific flash_info tweeks, ->default_init():
* spi_nor_manufacturer_init_params()
*
* which can be overwritten by:
* 3/ SFDP flash parameters initialization. JESD216 SFDP is a standard and
* should be more accurate that the above.
* spi_nor_sfdp_init_params()
*
* Please note that there is a ->post_bfpt() fixup hook that can overwrite
* the flash parameters and settings immediately after parsing the Basic
* Flash Parameter Table.
*
* which can be overwritten by:
* 4/ Post SFDP flash parameters initialization. Used to tweak various
* parameters that could not be extracted by other means (i.e. when
* information provided by the SFDP/flash_info tables are incomplete or
* wrong).
* spi_nor_post_sfdp_fixups()
*
* 5/ Late default flash parameters initialization, used when the
* ->default_init() hook or the SFDP parser do not set specific params.
* spi_nor_late_init_params()
*/
static void spi_nor_init_params(struct spi_nor *nor)
{
spi_nor_info_init_params(nor);
spi_nor_manufacturer_init_params(nor);
if ((nor->info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) &&
!(nor->info->flags & SPI_NOR_SKIP_SFDP))
spi_nor_sfdp_init_params(nor);
spi_nor_post_sfdp_fixups(nor);
spi_nor_late_init_params(nor);
}
/**
* spi_nor_quad_enable() - enable Quad I/O if needed.
* @nor: pointer to a 'struct spi_nor'
*
* Return: 0 on success, -errno otherwise.
*/
static int spi_nor_quad_enable(struct spi_nor *nor)
{
if (!nor->params.quad_enable)
return 0;
if (!(spi_nor_get_protocol_width(nor->read_proto) == 4 ||
spi_nor_get_protocol_width(nor->write_proto) == 4))
return 0;
return nor->params.quad_enable(nor);
}
static int spi_nor_init(struct spi_nor *nor)
{
int err;
if (nor->clear_sr_bp) {
if (nor->quad_enable == spansion_quad_enable)
if (nor->params.quad_enable == spansion_quad_enable)
nor->clear_sr_bp = spi_nor_spansion_clear_sr_bp;
err = nor->clear_sr_bp(nor);
......@@ -4044,12 +4691,10 @@ static int spi_nor_init(struct spi_nor *nor)
}
}
if (nor->quad_enable) {
err = nor->quad_enable(nor);
if (err) {
dev_err(nor->dev, "quad mode not supported\n");
return err;
}
err = spi_nor_quad_enable(nor);
if (err) {
dev_err(nor->dev, "quad mode not supported\n");
return err;
}
if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES)) {
......@@ -4062,7 +4707,7 @@ static int spi_nor_init(struct spi_nor *nor)
*/
WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET,
"enabling reset hack; may not recover from unexpected reboots\n");
set_4byte(nor, true);
nor->params.set_4byte(nor, true);
}
return 0;
......@@ -4086,7 +4731,7 @@ void spi_nor_restore(struct spi_nor *nor)
/* restore the addressing mode */
if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES) &&
nor->flags & SNOR_F_BROKEN_RESET)
set_4byte(nor, false);
nor->params.set_4byte(nor, false);
}
EXPORT_SYMBOL_GPL(spi_nor_restore);
......@@ -4102,25 +4747,47 @@ static const struct flash_info *spi_nor_match_id(const char *name)
return NULL;
}
int spi_nor_scan(struct spi_nor *nor, const char *name,
const struct spi_nor_hwcaps *hwcaps)
static int spi_nor_set_addr_width(struct spi_nor *nor)
{
if (nor->addr_width) {
/* already configured from SFDP */
} else if (nor->info->addr_width) {
nor->addr_width = nor->info->addr_width;
} else if (nor->mtd.size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
nor->addr_width = 4;
} else {
nor->addr_width = 3;
}
if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
dev_err(nor->dev, "address width is too large: %u\n",
nor->addr_width);
return -EINVAL;
}
/* Set 4byte opcodes when possible. */
if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
!(nor->flags & SNOR_F_HAS_4BAIT))
spi_nor_set_4byte_opcodes(nor);
return 0;
}
static void spi_nor_debugfs_init(struct spi_nor *nor,
const struct flash_info *info)
{
struct spi_nor_flash_parameter params;
const struct flash_info *info = NULL;
struct device *dev = nor->dev;
struct mtd_info *mtd = &nor->mtd;
struct device_node *np = spi_nor_get_flash_node(nor);
int ret;
int i;
ret = spi_nor_check(nor);
if (ret)
return ret;
mtd->dbg.partname = info->name;
mtd->dbg.partid = devm_kasprintf(nor->dev, GFP_KERNEL, "spi-nor:%*phN",
info->id_len, info->id);
}
/* Reset SPI protocol for all commands. */
nor->reg_proto = SNOR_PROTO_1_1_1;
nor->read_proto = SNOR_PROTO_1_1_1;
nor->write_proto = SNOR_PROTO_1_1_1;
static const struct flash_info *spi_nor_get_flash_info(struct spi_nor *nor,
const char *name)
{
const struct flash_info *info = NULL;
if (name)
info = spi_nor_match_id(name);
......@@ -4128,7 +4795,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
if (!info)
info = spi_nor_read_id(nor);
if (IS_ERR_OR_NULL(info))
return -ENOENT;
return ERR_PTR(-ENOENT);
/*
* If caller has specified name of flash model that can normally be
......@@ -4139,7 +4806,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
jinfo = spi_nor_read_id(nor);
if (IS_ERR(jinfo)) {
return PTR_ERR(jinfo);
return jinfo;
} else if (jinfo != info) {
/*
* JEDEC knows better, so overwrite platform ID. We
......@@ -4148,14 +4815,57 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
* marked read-only, and we don't want to lose that
* information, even if it's not 100% accurate.
*/
dev_warn(dev, "found %s, expected %s\n",
dev_warn(nor->dev, "found %s, expected %s\n",
jinfo->name, info->name);
info = jinfo;
}
}
return info;
}
int spi_nor_scan(struct spi_nor *nor, const char *name,
const struct spi_nor_hwcaps *hwcaps)
{
const struct flash_info *info;
struct device *dev = nor->dev;
struct mtd_info *mtd = &nor->mtd;
struct device_node *np = spi_nor_get_flash_node(nor);
struct spi_nor_flash_parameter *params = &nor->params;
int ret;
int i;
ret = spi_nor_check(nor);
if (ret)
return ret;
/* Reset SPI protocol for all commands. */
nor->reg_proto = SNOR_PROTO_1_1_1;
nor->read_proto = SNOR_PROTO_1_1_1;
nor->write_proto = SNOR_PROTO_1_1_1;
/*
* We need the bounce buffer early to read/write registers when going
* through the spi-mem layer (buffers have to be DMA-able).
* For spi-mem drivers, we'll reallocate a new buffer if
* nor->page_size turns out to be greater than PAGE_SIZE (which
* shouldn't happen before long since NOR pages are usually less
* than 1KB) after spi_nor_scan() returns.
*/
nor->bouncebuf_size = PAGE_SIZE;
nor->bouncebuf = devm_kmalloc(dev, nor->bouncebuf_size,
GFP_KERNEL);
if (!nor->bouncebuf)
return -ENOMEM;
info = spi_nor_get_flash_info(nor, name);
if (IS_ERR(info))
return PTR_ERR(info);
nor->info = info;
spi_nor_debugfs_init(nor, info);
mutex_init(&nor->lock);
/*
......@@ -4163,9 +4873,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
* spi_nor_wait_till_ready(). Xilinx S3AN share MFR
* with Atmel spi-nor
*/
if (info->flags & SPI_S3AN)
if (info->flags & SPI_NOR_XSR_RDY)
nor->flags |= SNOR_F_READY_XSR_RDY;
if (info->flags & SPI_NOR_HAS_LOCK)
nor->flags |= SNOR_F_HAS_LOCK;
/*
* Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up
* with the software protection bits set.
......@@ -4176,10 +4889,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
nor->info->flags & SPI_NOR_HAS_LOCK)
nor->clear_sr_bp = spi_nor_clear_sr_bp;
/* Parse the Serial Flash Discoverable Parameters table. */
ret = spi_nor_init_params(nor, &params);
if (ret)
return ret;
/* Init flash parameters based on flash_info struct and SFDP */
spi_nor_init_params(nor);
if (!mtd->name)
mtd->name = dev_name(dev);
......@@ -4187,21 +4898,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
mtd->type = MTD_NORFLASH;
mtd->writesize = 1;
mtd->flags = MTD_CAP_NORFLASH;
mtd->size = params.size;
mtd->size = params->size;
mtd->_erase = spi_nor_erase;
mtd->_read = spi_nor_read;
mtd->_resume = spi_nor_resume;
/* NOR protection support for STmicro/Micron chips and similar */
if (JEDEC_MFR(info) == SNOR_MFR_ST ||
JEDEC_MFR(info) == SNOR_MFR_MICRON ||
info->flags & SPI_NOR_HAS_LOCK) {
nor->flash_lock = stm_lock;
nor->flash_unlock = stm_unlock;
nor->flash_is_locked = stm_is_locked;
}
if (nor->flash_lock && nor->flash_unlock && nor->flash_is_locked) {
if (nor->params.locking_ops) {
mtd->_lock = spi_nor_lock;
mtd->_unlock = spi_nor_unlock;
mtd->_is_locked = spi_nor_is_locked;
......@@ -4226,68 +4928,28 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
mtd->flags |= MTD_NO_ERASE;
mtd->dev.parent = dev;
nor->page_size = params.page_size;
nor->page_size = params->page_size;
mtd->writebufsize = nor->page_size;
if (np) {
/* If we were instantiated by DT, use it */
if (of_property_read_bool(np, "m25p,fast-read"))
params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
else
params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
} else {
/* If we weren't instantiated by DT, default to fast-read */
params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
}
if (of_property_read_bool(np, "broken-flash-reset"))
nor->flags |= SNOR_F_BROKEN_RESET;
/* Some devices cannot do fast-read, no matter what DT tells us */
if (info->flags & SPI_NOR_NO_FR)
params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
/*
* Configure the SPI memory:
* - select op codes for (Fast) Read, Page Program and Sector Erase.
* - set the number of dummy cycles (mode cycles + wait states).
* - set the SPI protocols for register and memory accesses.
* - set the Quad Enable bit if needed (required by SPI x-y-4 protos).
*/
ret = spi_nor_setup(nor, &params, hwcaps);
ret = spi_nor_setup(nor, hwcaps);
if (ret)
return ret;
if (nor->addr_width) {
/* already configured from SFDP */
} else if (info->addr_width) {
nor->addr_width = info->addr_width;
} else if (mtd->size > 0x1000000) {
/* enable 4-byte addressing if the device exceeds 16MiB */
nor->addr_width = 4;
} else {
nor->addr_width = 3;
}
if (info->flags & SPI_NOR_4B_OPCODES ||
(JEDEC_MFR(info) == SNOR_MFR_SPANSION && mtd->size > SZ_16M))
if (info->flags & SPI_NOR_4B_OPCODES)
nor->flags |= SNOR_F_4B_OPCODES;
if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
!(nor->flags & SNOR_F_HAS_4BAIT))
spi_nor_set_4byte_opcodes(nor);
if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
dev_err(dev, "address width is too large: %u\n",
nor->addr_width);
return -EINVAL;
}
if (info->flags & SPI_S3AN) {
ret = s3an_nor_scan(nor);
if (ret)
return ret;
}
ret = spi_nor_set_addr_width(nor);
if (ret)
return ret;
/* Send all the required SPI flash commands to initialize device */
ret = spi_nor_init(nor);
......@@ -4317,6 +4979,174 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
}
EXPORT_SYMBOL_GPL(spi_nor_scan);
static int spi_nor_probe(struct spi_mem *spimem)
{
struct spi_device *spi = spimem->spi;
struct flash_platform_data *data = dev_get_platdata(&spi->dev);
struct spi_nor *nor;
/*
* Enable all caps by default. The core will mask them after
* checking what's really supported using spi_mem_supports_op().
*/
const struct spi_nor_hwcaps hwcaps = { .mask = SNOR_HWCAPS_ALL };
char *flash_name;
int ret;
nor = devm_kzalloc(&spi->dev, sizeof(*nor), GFP_KERNEL);
if (!nor)
return -ENOMEM;
nor->spimem = spimem;
nor->dev = &spi->dev;
spi_nor_set_flash_node(nor, spi->dev.of_node);
spi_mem_set_drvdata(spimem, nor);
if (data && data->name)
nor->mtd.name = data->name;
if (!nor->mtd.name)
nor->mtd.name = spi_mem_get_name(spimem);
/*
* For some (historical?) reason many platforms provide two different
* names in flash_platform_data: "name" and "type". Quite often name is
* set to "m25p80" and then "type" provides a real chip name.
* If that's the case, respect "type" and ignore a "name".
*/
if (data && data->type)
flash_name = data->type;
else if (!strcmp(spi->modalias, "spi-nor"))
flash_name = NULL; /* auto-detect */
else
flash_name = spi->modalias;
ret = spi_nor_scan(nor, flash_name, &hwcaps);
if (ret)
return ret;
/*
* None of the existing parts have > 512B pages, but let's play safe
* and add this logic so that if anyone ever adds support for such
* a NOR we don't end up with buffer overflows.
*/
if (nor->page_size > PAGE_SIZE) {
nor->bouncebuf_size = nor->page_size;
devm_kfree(nor->dev, nor->bouncebuf);
nor->bouncebuf = devm_kmalloc(nor->dev,
nor->bouncebuf_size,
GFP_KERNEL);
if (!nor->bouncebuf)
return -ENOMEM;
}
return mtd_device_register(&nor->mtd, data ? data->parts : NULL,
data ? data->nr_parts : 0);
}
static int spi_nor_remove(struct spi_mem *spimem)
{
struct spi_nor *nor = spi_mem_get_drvdata(spimem);
spi_nor_restore(nor);
/* Clean up MTD stuff. */
return mtd_device_unregister(&nor->mtd);
}
static void spi_nor_shutdown(struct spi_mem *spimem)
{
struct spi_nor *nor = spi_mem_get_drvdata(spimem);
spi_nor_restore(nor);
}
/*
* Do NOT add to this array without reading the following:
*
* Historically, many flash devices are bound to this driver by their name. But
* since most of these flash are compatible to some extent, and their
* differences can often be differentiated by the JEDEC read-ID command, we
* encourage new users to add support to the spi-nor library, and simply bind
* against a generic string here (e.g., "jedec,spi-nor").
*
* Many flash names are kept here in this list (as well as in spi-nor.c) to
* keep them available as module aliases for existing platforms.
*/
static const struct spi_device_id spi_nor_dev_ids[] = {
/*
* Allow non-DT platform devices to bind to the "spi-nor" modalias, and
* hack around the fact that the SPI core does not provide uevent
* matching for .of_match_table
*/
{"spi-nor"},
/*
* Entries not used in DTs that should be safe to drop after replacing
* them with "spi-nor" in platform data.
*/
{"s25sl064a"}, {"w25x16"}, {"m25p10"}, {"m25px64"},
/*
* Entries that were used in DTs without "jedec,spi-nor" fallback and
* should be kept for backward compatibility.
*/
{"at25df321a"}, {"at25df641"}, {"at26df081a"},
{"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, {"mx25l12805d"},
{"mx25l25635e"},{"mx66l51235l"},
{"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"},
{"s25fl256s1"}, {"s25fl512s"}, {"s25sl12801"}, {"s25fl008k"},
{"s25fl064k"},
{"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"},
{"m25p40"}, {"m25p80"}, {"m25p16"}, {"m25p32"},
{"m25p64"}, {"m25p128"},
{"w25x80"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"},
{"w25q80bl"}, {"w25q128"}, {"w25q256"},
/* Flashes that can't be detected using JEDEC */
{"m25p05-nonjedec"}, {"m25p10-nonjedec"}, {"m25p20-nonjedec"},
{"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"},
{"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"},
/* Everspin MRAMs (non-JEDEC) */
{ "mr25h128" }, /* 128 Kib, 40 MHz */
{ "mr25h256" }, /* 256 Kib, 40 MHz */
{ "mr25h10" }, /* 1 Mib, 40 MHz */
{ "mr25h40" }, /* 4 Mib, 40 MHz */
{ },
};
MODULE_DEVICE_TABLE(spi, spi_nor_dev_ids);
static const struct of_device_id spi_nor_of_table[] = {
/*
* Generic compatibility for SPI NOR that can be identified by the
* JEDEC READ ID opcode (0x9F). Use this, if possible.
*/
{ .compatible = "jedec,spi-nor" },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, spi_nor_of_table);
/*
* REVISIT: many of these chips have deep power-down modes, which
* should clearly be entered on suspend() to minimize power use.
* And also when they're otherwise idle...
*/
static struct spi_mem_driver spi_nor_driver = {
.spidrv = {
.driver = {
.name = "spi-nor",
.of_match_table = spi_nor_of_table,
},
.id_table = spi_nor_dev_ids,
},
.probe = spi_nor_probe,
.remove = spi_nor_remove,
.shutdown = spi_nor_shutdown,
};
module_spi_mem_driver(spi_nor_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>");
MODULE_AUTHOR("Mike Lavender");
......
include/linux/mtd/mtd.h
浏览文件 @ 560852a1
......@@ -189,6 +189,9 @@ struct module; /* only needed for owner field in mtd_info */
*/
struct mtd_debug_info {
struct dentry *dfs_dir;
const char *partname;
const char *partid;
};
struct mtd_info {
......
include/linux/mtd/spi-nor.h
浏览文件 @ 560852a1
......@@ -9,6 +9,7 @@
#include <linux/bitops.h>
#include <linux/mtd/cfi.h>
#include <linux/mtd/mtd.h>
#include <linux/spi/spi-mem.h>
/*
* Manufacturer IDs
......@@ -224,7 +225,6 @@ static inline u8 spi_nor_get_protocol_width(enum spi_nor_protocol proto)
return spi_nor_get_protocol_data_nbits(proto);
}
#define SPI_NOR_MAX_CMD_SIZE 8
enum spi_nor_ops {
SPI_NOR_OPS_READ = 0,
SPI_NOR_OPS_WRITE,
......@@ -237,12 +237,12 @@ enum spi_nor_option_flags {
SNOR_F_USE_FSR = BIT(0),
SNOR_F_HAS_SR_TB = BIT(1),
SNOR_F_NO_OP_CHIP_ERASE = BIT(2),
SNOR_F_S3AN_ADDR_DEFAULT = BIT(3),
SNOR_F_READY_XSR_RDY = BIT(4),
SNOR_F_USE_CLSR = BIT(5),
SNOR_F_BROKEN_RESET = BIT(6),
SNOR_F_4B_OPCODES = BIT(7),
SNOR_F_HAS_4BAIT = BIT(8),
SNOR_F_READY_XSR_RDY = BIT(3),
SNOR_F_USE_CLSR = BIT(4),
SNOR_F_BROKEN_RESET = BIT(5),
SNOR_F_4B_OPCODES = BIT(6),
SNOR_F_HAS_4BAIT = BIT(7),
SNOR_F_HAS_LOCK = BIT(8),
};
/**
......@@ -333,6 +333,195 @@ struct spi_nor_erase_map {
u8 uniform_erase_type;
};
/**
* struct spi_nor_hwcaps - Structure for describing the hardware capabilies
* supported by the SPI controller (bus master).
* @mask: the bitmask listing all the supported hw capabilies
*/
struct spi_nor_hwcaps {
u32 mask;
};
/*
*(Fast) Read capabilities.
* MUST be ordered by priority: the higher bit position, the higher priority.
* As a matter of performances, it is relevant to use Octal SPI protocols first,
* then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly
* (Slow) Read.
*/
#define SNOR_HWCAPS_READ_MASK GENMASK(14, 0)
#define SNOR_HWCAPS_READ BIT(0)
#define SNOR_HWCAPS_READ_FAST BIT(1)
#define SNOR_HWCAPS_READ_1_1_1_DTR BIT(2)
#define SNOR_HWCAPS_READ_DUAL GENMASK(6, 3)
#define SNOR_HWCAPS_READ_1_1_2 BIT(3)
#define SNOR_HWCAPS_READ_1_2_2 BIT(4)
#define SNOR_HWCAPS_READ_2_2_2 BIT(5)
#define SNOR_HWCAPS_READ_1_2_2_DTR BIT(6)
#define SNOR_HWCAPS_READ_QUAD GENMASK(10, 7)
#define SNOR_HWCAPS_READ_1_1_4 BIT(7)
#define SNOR_HWCAPS_READ_1_4_4 BIT(8)
#define SNOR_HWCAPS_READ_4_4_4 BIT(9)
#define SNOR_HWCAPS_READ_1_4_4_DTR BIT(10)
#define SNOR_HWCAPS_READ_OCTAL GENMASK(14, 11)
#define SNOR_HWCAPS_READ_1_1_8 BIT(11)
#define SNOR_HWCAPS_READ_1_8_8 BIT(12)
#define SNOR_HWCAPS_READ_8_8_8 BIT(13)
#define SNOR_HWCAPS_READ_1_8_8_DTR BIT(14)
/*
* Page Program capabilities.
* MUST be ordered by priority: the higher bit position, the higher priority.
* Like (Fast) Read capabilities, Octal/Quad SPI protocols are preferred to the
* legacy SPI 1-1-1 protocol.
* Note that Dual Page Programs are not supported because there is no existing
* JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory
* implements such commands.
*/
#define SNOR_HWCAPS_PP_MASK GENMASK(22, 16)
#define SNOR_HWCAPS_PP BIT(16)
#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17)
#define SNOR_HWCAPS_PP_1_1_4 BIT(17)
#define SNOR_HWCAPS_PP_1_4_4 BIT(18)
#define SNOR_HWCAPS_PP_4_4_4 BIT(19)
#define SNOR_HWCAPS_PP_OCTAL GENMASK(22, 20)
#define SNOR_HWCAPS_PP_1_1_8 BIT(20)
#define SNOR_HWCAPS_PP_1_8_8 BIT(21)
#define SNOR_HWCAPS_PP_8_8_8 BIT(22)
#define SNOR_HWCAPS_X_X_X (SNOR_HWCAPS_READ_2_2_2 | \
SNOR_HWCAPS_READ_4_4_4 | \
SNOR_HWCAPS_READ_8_8_8 | \
SNOR_HWCAPS_PP_4_4_4 | \
SNOR_HWCAPS_PP_8_8_8)
#define SNOR_HWCAPS_DTR (SNOR_HWCAPS_READ_1_1_1_DTR | \
SNOR_HWCAPS_READ_1_2_2_DTR | \
SNOR_HWCAPS_READ_1_4_4_DTR | \
SNOR_HWCAPS_READ_1_8_8_DTR)
#define SNOR_HWCAPS_ALL (SNOR_HWCAPS_READ_MASK | \
SNOR_HWCAPS_PP_MASK)
struct spi_nor_read_command {
u8 num_mode_clocks;
u8 num_wait_states;
u8 opcode;
enum spi_nor_protocol proto;
};
struct spi_nor_pp_command {
u8 opcode;
enum spi_nor_protocol proto;
};
enum spi_nor_read_command_index {
SNOR_CMD_READ,
SNOR_CMD_READ_FAST,
SNOR_CMD_READ_1_1_1_DTR,
/* Dual SPI */
SNOR_CMD_READ_1_1_2,
SNOR_CMD_READ_1_2_2,
SNOR_CMD_READ_2_2_2,
SNOR_CMD_READ_1_2_2_DTR,
/* Quad SPI */
SNOR_CMD_READ_1_1_4,
SNOR_CMD_READ_1_4_4,
SNOR_CMD_READ_4_4_4,
SNOR_CMD_READ_1_4_4_DTR,
/* Octal SPI */
SNOR_CMD_READ_1_1_8,
SNOR_CMD_READ_1_8_8,
SNOR_CMD_READ_8_8_8,
SNOR_CMD_READ_1_8_8_DTR,
SNOR_CMD_READ_MAX
};
enum spi_nor_pp_command_index {
SNOR_CMD_PP,
/* Quad SPI */
SNOR_CMD_PP_1_1_4,
SNOR_CMD_PP_1_4_4,
SNOR_CMD_PP_4_4_4,
/* Octal SPI */
SNOR_CMD_PP_1_1_8,
SNOR_CMD_PP_1_8_8,
SNOR_CMD_PP_8_8_8,
SNOR_CMD_PP_MAX
};
/* Forward declaration that will be used in 'struct spi_nor_flash_parameter' */
struct spi_nor;
/**
* struct spi_nor_locking_ops - SPI NOR locking methods
* @lock: lock a region of the SPI NOR.
* @unlock: unlock a region of the SPI NOR.
* @is_locked: check if a region of the SPI NOR is completely locked
*/
struct spi_nor_locking_ops {
int (*lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
int (*unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
int (*is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
};
/**
* struct spi_nor_flash_parameter - SPI NOR flash parameters and settings.
* Includes legacy flash parameters and settings that can be overwritten
* by the spi_nor_fixups hooks, or dynamically when parsing the JESD216
* Serial Flash Discoverable Parameters (SFDP) tables.
*
* @size: the flash memory density in bytes.
* @page_size: the page size of the SPI NOR flash memory.
* @hwcaps: describes the read and page program hardware
* capabilities.
* @reads: read capabilities ordered by priority: the higher index
* in the array, the higher priority.
* @page_programs: page program capabilities ordered by priority: the
* higher index in the array, the higher priority.
* @erase_map: the erase map parsed from the SFDP Sector Map Parameter
* Table.
* @quad_enable: enables SPI NOR quad mode.
* @set_4byte: puts the SPI NOR in 4 byte addressing mode.
* @convert_addr: converts an absolute address into something the flash
* will understand. Particularly useful when pagesize is
* not a power-of-2.
* @setup: configures the SPI NOR memory. Useful for SPI NOR
* flashes that have peculiarities to the SPI NOR standard
* e.g. different opcodes, specific address calculation,
* page size, etc.
* @locking_ops: SPI NOR locking methods.
*/
struct spi_nor_flash_parameter {
u64 size;
u32 page_size;
struct spi_nor_hwcaps hwcaps;
struct spi_nor_read_command reads[SNOR_CMD_READ_MAX];
struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX];
struct spi_nor_erase_map erase_map;
int (*quad_enable)(struct spi_nor *nor);
int (*set_4byte)(struct spi_nor *nor, bool enable);
u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps);
const struct spi_nor_locking_ops *locking_ops;
};
/**
* struct flash_info - Forward declaration of a structure used internally by
* spi_nor_scan()
......@@ -344,6 +533,10 @@ struct flash_info;
* @mtd: point to a mtd_info structure
* @lock: the lock for the read/write/erase/lock/unlock operations
* @dev: point to a spi device, or a spi nor controller device.
* @spimem: point to the spi mem device
* @bouncebuf: bounce buffer used when the buffer passed by the MTD
* layer is not DMA-able
* @bouncebuf_size: size of the bounce buffer
* @info: spi-nor part JDEC MFR id and other info
* @page_size: the page size of the SPI NOR
* @addr_width: number of address bytes
......@@ -356,8 +549,6 @@ struct flash_info;
* @read_proto: the SPI protocol for read operations
* @write_proto: the SPI protocol for write operations
* @reg_proto the SPI protocol for read_reg/write_reg/erase operations
* @cmd_buf: used by the write_reg
* @erase_map: the erase map of the SPI NOR
* @prepare: [OPTIONAL] do some preparations for the
* read/write/erase/lock/unlock operations
* @unprepare: [OPTIONAL] do some post work after the
......@@ -369,19 +560,21 @@ struct flash_info;
* @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR
* at the offset @offs; if not provided by the driver,
* spi-nor will send the erase opcode via write_reg()
* @flash_lock: [FLASH-SPECIFIC] lock a region of the SPI NOR
* @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR
* @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is
* @quad_enable: [FLASH-SPECIFIC] enables SPI NOR quad mode
* @clear_sr_bp: [FLASH-SPECIFIC] clears the Block Protection Bits from
* the SPI NOR Status Register.
* completely locked
* @params: [FLASH-SPECIFIC] SPI-NOR flash parameters and settings.
* The structure includes legacy flash parameters and
* settings that can be overwritten by the spi_nor_fixups
* hooks, or dynamically when parsing the SFDP tables.
* @priv: the private data
*/
struct spi_nor {
struct mtd_info mtd;
struct mutex lock;
struct device *dev;
struct spi_mem *spimem;
u8 *bouncebuf;
size_t bouncebuf_size;
const struct flash_info *info;
u32 page_size;
u8 addr_width;
......@@ -394,8 +587,6 @@ struct spi_nor {
enum spi_nor_protocol reg_proto;
bool sst_write_second;
u32 flags;
u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE];
struct spi_nor_erase_map erase_map;
int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops);
void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops);
......@@ -408,11 +599,8 @@ struct spi_nor {
size_t len, const u_char *write_buf);
int (*erase)(struct spi_nor *nor, loff_t offs);
int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
int (*flash_unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
int (*flash_is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
int (*quad_enable)(struct spi_nor *nor);
int (*clear_sr_bp)(struct spi_nor *nor);
struct spi_nor_flash_parameter params;
void *priv;
};
......@@ -443,7 +631,7 @@ spi_nor_region_mark_overlay(struct spi_nor_erase_region *region)
static bool __maybe_unused spi_nor_has_uniform_erase(const struct spi_nor *nor)
{
return !!nor->erase_map.uniform_erase_type;
return !!nor->params.erase_map.uniform_erase_type;
}
static inline void spi_nor_set_flash_node(struct spi_nor *nor,
......@@ -457,67 +645,6 @@ static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
return mtd_get_of_node(&nor->mtd);
}
/**
* struct spi_nor_hwcaps - Structure for describing the hardware capabilies
* supported by the SPI controller (bus master).
* @mask: the bitmask listing all the supported hw capabilies
*/
struct spi_nor_hwcaps {
u32 mask;
};
/*
*(Fast) Read capabilities.
* MUST be ordered by priority: the higher bit position, the higher priority.
* As a matter of performances, it is relevant to use Octal SPI protocols first,
* then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly
* (Slow) Read.
*/
#define SNOR_HWCAPS_READ_MASK GENMASK(14, 0)
#define SNOR_HWCAPS_READ BIT(0)
#define SNOR_HWCAPS_READ_FAST BIT(1)
#define SNOR_HWCAPS_READ_1_1_1_DTR BIT(2)
#define SNOR_HWCAPS_READ_DUAL GENMASK(6, 3)
#define SNOR_HWCAPS_READ_1_1_2 BIT(3)
#define SNOR_HWCAPS_READ_1_2_2 BIT(4)
#define SNOR_HWCAPS_READ_2_2_2 BIT(5)
#define SNOR_HWCAPS_READ_1_2_2_DTR BIT(6)
#define SNOR_HWCAPS_READ_QUAD GENMASK(10, 7)
#define SNOR_HWCAPS_READ_1_1_4 BIT(7)
#define SNOR_HWCAPS_READ_1_4_4 BIT(8)
#define SNOR_HWCAPS_READ_4_4_4 BIT(9)
#define SNOR_HWCAPS_READ_1_4_4_DTR BIT(10)
#define SNOR_HWCAPS_READ_OCTAL GENMASK(14, 11)
#define SNOR_HWCAPS_READ_1_1_8 BIT(11)
#define SNOR_HWCAPS_READ_1_8_8 BIT(12)
#define SNOR_HWCAPS_READ_8_8_8 BIT(13)
#define SNOR_HWCAPS_READ_1_8_8_DTR BIT(14)
/*
* Page Program capabilities.
* MUST be ordered by priority: the higher bit position, the higher priority.
* Like (Fast) Read capabilities, Octal/Quad SPI protocols are preferred to the
* legacy SPI 1-1-1 protocol.
* Note that Dual Page Programs are not supported because there is no existing
* JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory
* implements such commands.
*/
#define SNOR_HWCAPS_PP_MASK GENMASK(22, 16)
#define SNOR_HWCAPS_PP BIT(16)
#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17)
#define SNOR_HWCAPS_PP_1_1_4 BIT(17)
#define SNOR_HWCAPS_PP_1_4_4 BIT(18)
#define SNOR_HWCAPS_PP_4_4_4 BIT(19)
#define SNOR_HWCAPS_PP_OCTAL GENMASK(22, 20)
#define SNOR_HWCAPS_PP_1_1_8 BIT(20)
#define SNOR_HWCAPS_PP_1_8_8 BIT(21)
#define SNOR_HWCAPS_PP_8_8_8 BIT(22)
/**
* spi_nor_scan() - scan the SPI NOR
* @nor: the spi_nor structure
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或