diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index c528017d6128b613f7acbcff5480c9eeac1f032c..c2e120b11bef7cebe71c5916fa866bf6f02bbfe0 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -323,6 +323,17 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr)
 
 	mmc_attach_bus(host, &mmc_ops);
 
+	/*
+	 * Sanity check the voltages that the card claims to
+	 * support.
+	 */
+	if (ocr & 0x7F) {
+		printk(KERN_WARNING "%s: card claims to support voltages "
+		       "below the defined range. These will be ignored.\n",
+		       mmc_hostname(host));
+		ocr &= ~0x7F;
+	}
+
 	host->ocr = mmc_select_voltage(host, ocr);
 
 	/*
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 6c6beb48f3a8b2df582c6bd040fa6b8150d31877..fb18b301502e558b3b01d223a04ebb526cb6ed07 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -297,6 +297,24 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr)
 
 	mmc_attach_bus(host, &mmc_sd_ops);
 
+	/*
+	 * Sanity check the voltages that the card claims to
+	 * support.
+	 */
+	if (ocr & 0x7F) {
+		printk(KERN_WARNING "%s: card claims to support voltages "
+		       "below the defined range. These will be ignored.\n",
+		       mmc_hostname(host));
+		ocr &= ~0x7F;
+	}
+
+	if (ocr & MMC_VDD_165_195) {
+		printk(KERN_WARNING "%s: SD card claims to support the "
+		       "incompletely defined 'low voltage range'. This "
+		       "will be ignored.\n", mmc_hostname(host));
+		ocr &= ~MMC_VDD_165_195;
+	}
+
 	host->ocr = mmc_select_voltage(host, ocr);
 
 	/*
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a57f6a3d48d340e94ad5e07ca6b6901ad4ff562f..ff5bf73cdd25656bcc41df6b1dc9e7e03e4d42f0 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -659,8 +659,7 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power)
 	pwr = SDHCI_POWER_ON;
 
 	switch (1 << power) {
-	case MMC_VDD_17_18:
-	case MMC_VDD_18_19:
+	case MMC_VDD_165_195:
 		pwr |= SDHCI_POWER_180;
 		break;
 	case MMC_VDD_29_30:
@@ -1280,7 +1279,7 @@ static int __devinit sdhci_probe_slot(struct pci_dev *pdev, int slot)
 	if (caps & SDHCI_CAN_VDD_300)
 		mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31;
 	if (caps & SDHCI_CAN_VDD_180)
-		mmc->ocr_avail |= MMC_VDD_17_18|MMC_VDD_18_19;
+		mmc->ocr_avail |= MMC_VDD_165_195;
 
 	if (mmc->ocr_avail == 0) {
 		printk(KERN_ERR "%s: Hardware doesn't report any "
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 5a66d8a2bf17a8b6614ce29bebd38ddf4bdeca08..b1350dfd3e9108751b9fadd15dd8f1e61b77da2d 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -65,14 +65,7 @@ struct mmc_host {
 	unsigned int		f_max;
 	u32			ocr_avail;
 
-#define MMC_VDD_145_150		0x00000001	/* VDD voltage 1.45 - 1.50 */
-#define MMC_VDD_150_155		0x00000002	/* VDD voltage 1.50 - 1.55 */
-#define MMC_VDD_155_160		0x00000004	/* VDD voltage 1.55 - 1.60 */
-#define MMC_VDD_160_165		0x00000008	/* VDD voltage 1.60 - 1.65 */
-#define MMC_VDD_165_170		0x00000010	/* VDD voltage 1.65 - 1.70 */
-#define MMC_VDD_17_18		0x00000020	/* VDD voltage 1.7 - 1.8 */
-#define MMC_VDD_18_19		0x00000040	/* VDD voltage 1.8 - 1.9 */
-#define MMC_VDD_19_20		0x00000080	/* VDD voltage 1.9 - 2.0 */
+#define MMC_VDD_165_195		0x00000080	/* VDD voltage 1.65 - 1.95 */
 #define MMC_VDD_20_21		0x00000100	/* VDD voltage 2.0 ~ 2.1 */
 #define MMC_VDD_21_22		0x00000200	/* VDD voltage 2.1 ~ 2.2 */
 #define MMC_VDD_22_23		0x00000400	/* VDD voltage 2.2 ~ 2.3 */