diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt b/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt index 61df564c0d238613e55b3057192528db54151e8b..d74091a8a3bfd243490d83faedd452ec9a2c426c 100644 --- a/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt +++ b/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt @@ -4,6 +4,8 @@ Marvell Armada 370 and Armada XP Interrupt Controller Required properties: - compatible: Should be "marvell,mpic" - interrupt-controller: Identifies the node as an interrupt controller. +- msi-controller: Identifies the node as an PCI Message Signaled + Interrupt controller. - #interrupt-cells: The number of cells to define the interrupts. Should be 1. The cell is the IRQ number @@ -24,6 +26,7 @@ Example: #address-cells = <1>; #size-cells = <1>; interrupt-controller; + msi-controller; reg = <0xd0020a00 0x1d0>, <0xd0021070 0x58>; }; diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt index 92d36e2aa87791c75af70f23da1da3169c94f96c..f28d82bbbc56b3f3dff7716ede2f200f315d8e70 100644 --- a/Documentation/devicetree/bindings/arm/cci.txt +++ b/Documentation/devicetree/bindings/arm/cci.txt @@ -36,14 +36,18 @@ specific to ARM. - reg Usage: required - Value type: + Value type: Integer cells. A register entry, expressed as a pair + of cells, containing base and size. Definition: A standard property. Specifies base physical address of CCI control registers common to all interfaces. - ranges: Usage: required - Value type: + Value type: Integer cells. An array of range entries, expressed + as a tuple of cells, containing child address, + parent address and the size of the region in the + child address space. Definition: A standard property. Follow rules in the ePAPR for hierarchical bus addressing. CCI interfaces addresses refer to the parent node addressing @@ -74,11 +78,49 @@ specific to ARM. - reg: Usage: required - Value type: + Value type: Integer cells. A register entry, expressed + as a pair of cells, containing base and + size. Definition: the base address and size of the corresponding interface programming registers. + - CCI PMU node + + Parent node must be CCI interconnect node. + + A CCI pmu node must contain the following properties: + + - compatible + Usage: required + Value type: + Definition: must be "arm,cci-400-pmu" + + - reg: + Usage: required + Value type: Integer cells. A register entry, expressed + as a pair of cells, containing base and + size. + Definition: the base address and size of the + corresponding interface programming + registers. + + - interrupts: + Usage: required + Value type: Integer cells. Array of interrupt specifier + entries, as defined in + ../interrupt-controller/interrupts.txt. + Definition: list of counter overflow interrupts, one per + counter. The interrupts must be specified + starting with the cycle counter overflow + interrupt, followed by counter0 overflow + interrupt, counter1 overflow interrupt,... + ,counterN overflow interrupt. + + The CCI PMU has an interrupt signal for each + counter. The number of interrupts must be + equal to the number of counters. + * CCI interconnect bus masters Description: masters in the device tree connected to a CCI port @@ -144,7 +186,7 @@ Example: #address-cells = <1>; #size-cells = <1>; reg = <0x0 0x2c090000 0 0x1000>; - ranges = <0x0 0x0 0x2c090000 0x6000>; + ranges = <0x0 0x0 0x2c090000 0x10000>; cci_control0: slave-if@1000 { compatible = "arm,cci-400-ctrl-if"; @@ -163,6 +205,16 @@ Example: interface-type = "ace"; reg = <0x5000 0x1000>; }; + + pmu@9000 { + compatible = "arm,cci-400-pmu"; + reg = <0x9000 0x5000>; + interrupts = <0 101 4>, + <0 102 4>, + <0 103 4>, + <0 104 4>, + <0 105 4>; + }; }; This CCI node corresponds to a CCI component whose control registers sits diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt index cffc93d97f54800cb91d47cf50d666abe16e8758..fc2910fa7e45fdbbe41a0ccdd947e736ca2e0e75 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt @@ -1,10 +1,10 @@ -* Gated Clock bindings for Marvell Orion SoCs +* Gated Clock bindings for Marvell EBU SoCs -Marvell Dove and Kirkwood allow some peripheral clocks to be gated to save -some power. The clock consumer should specify the desired clock by having -the clock ID in its "clocks" phandle cell. The clock ID is directly mapped to -the corresponding clock gating control bit in HW to ease manual clock lookup -in datasheet. +Marvell Armada 370/XP, Dove and Kirkwood allow some peripheral clocks to be +gated to save some power. The clock consumer should specify the desired clock +by having the clock ID in its "clocks" phandle cell. The clock ID is directly +mapped to the corresponding clock gating control bit in HW to ease manual clock +lookup in datasheet. The following is a list of provided IDs for Armada 370: ID Clock Peripheral @@ -94,6 +94,8 @@ ID Clock Peripheral Required properties: - compatible : shall be one of the following: + "marvell,armada-370-gating-clock" - for Armada 370 SoC clock gating + "marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating "marvell,dove-gating-clock" - for Dove SoC clock gating "marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating - reg : shall be the register address of the Clock Gating Control register diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt index 9556e2fedf6deb77a1b49579521b7744f7318d1e..08c716b2c6b6c411a13a04055ec267ce3ac5e4f2 100644 --- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt +++ b/Documentation/devicetree/bindings/pci/mvebu-pci.txt @@ -5,6 +5,7 @@ Mandatory properties: - compatible: one of the following values: marvell,armada-370-pcie marvell,armada-xp-pcie + marvell,dove-pcie marvell,kirkwood-pcie - #address-cells, set to <3> - #size-cells, set to <2> @@ -14,6 +15,8 @@ Mandatory properties: - ranges: ranges describing the MMIO registers to control the PCIe interfaces, and ranges describing the MBus windows needed to access the memory and I/O regions of each PCIe interface. +- msi-parent: Link to the hardware entity that serves as the Message + Signaled Interrupt controller for this PCI controller. The ranges describing the MMIO registers have the following layout: @@ -74,6 +77,8 @@ and the following optional properties: - marvell,pcie-lane: the physical PCIe lane number, for ports having multiple lanes. If this property is not found, we assume that the value is 0. +- reset-gpios: optional gpio to PERST# +- reset-delay-us: delay in us to wait after reset de-assertion Example: @@ -86,6 +91,7 @@ pcie-controller { #size-cells = <2>; bus-range = <0x00 0xff>; + msi-parent = <&mpic>; ranges = <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ @@ -135,6 +141,10 @@ pcie-controller { interrupt-map = <0 0 0 0 &mpic 58>; marvell,pcie-port = <0>; marvell,pcie-lane = <0>; + /* low-active PERST# reset on GPIO 25 */ + reset-gpios = <&gpio0 25 1>; + /* wait 20ms for device settle after reset deassertion */ + reset-delay-us = <20000>; clocks = <&gateclk 5>; status = "disabled"; }; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9bd3a85d880f412191478826ec1ea860e2b50097..04163fece49fea0662fcd338814aab1177842732 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -826,7 +826,6 @@ config ARCH_DAVINCI select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select HAVE_IDE - select NEED_MACH_GPIO_H select TI_PRIV_EDMA select USE_OF select ZONE_DMA diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 30a44e2df47ec22e0e6043b6a718620701f19cbf..40f15f133c55c3646d5eeac3ef3eec7764cae760 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -22,17 +22,19 @@ #include #include #include +#include +#include +#include +#include +#include #include #include +#include #include #include -#include #include -#include -#include -#include #define DA830_EVM_PHY_ID "" /* @@ -591,6 +593,10 @@ static __init void da830_evm_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; int ret; + ret = da830_register_gpio(); + if (ret) + pr_warn("da830_evm_init: GPIO init failed: %d\n", ret); + ret = da830_register_edma(da830_edma_rsv); if (ret) pr_warning("da830_evm_init: edma registration failed: %d\n", diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index dd1fb24521aa85b16baa9d200b40d28774591cfc..df16cb88a26b643814af5385affb94a7a8220882 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -38,6 +39,7 @@ #include #include +#include #include #include #include @@ -1437,6 +1439,10 @@ static __init void da850_evm_init(void) { int ret; + ret = da850_register_gpio(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + ret = pmic_tps65070_init(); if (ret) pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 42b23a3194a05d9052026e2f14c4a0fe5a9cc67e..ecdc7d44fa70aef07279f552e98a6354ed6c3900 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -22,15 +22,17 @@ #include #include #include +#include +#include +#include +#include +#include #include #include -#include #include -#include -#include -#include +#include #include "davinci.h" @@ -375,6 +377,11 @@ static struct spi_board_info dm355_evm_spi_info[] __initconst = { static __init void dm355_evm_init(void) { struct clk *aemif; + int ret; + + ret = dm355_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); gpio_request(1, "dm9000"); gpio_direction_input(1); diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 65a984c52df6fce12732ee0ff1b09902bb23d81a..43bacbf153140f7a9e6be87ed5e8b3cbe4012570 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -19,15 +19,16 @@ #include #include #include +#include +#include +#include +#include #include #include -#include +#include #include -#include -#include -#include #include "davinci.h" @@ -234,6 +235,11 @@ static struct spi_board_info dm355_leopard_spi_info[] __initconst = { static __init void dm355_leopard_init(void) { struct clk *aemif; + int ret; + + ret = dm355_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); gpio_request(9, "dm9000"); gpio_direction_input(9); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 4078ba93776b24ef9438f0dcc73c2f42dd859bd9..f4a6c18912ea50abaac233fedf26cef69af06724 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -743,6 +743,12 @@ static struct spi_board_info dm365_evm_spi_info[] __initconst = { static __init void dm365_evm_init(void) { + int ret; + + ret = dm365_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + evm_init_i2c(); davinci_serial_init(dm365_serial_device); diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 40bb9b5b87e829c2d4b741625141a58732921d9f..9cc32c283b8b90af050de90411a9b1d168b3b050 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -754,9 +754,14 @@ static int davinci_phy_fixup(struct phy_device *phydev) static __init void davinci_evm_init(void) { + int ret; struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; + ret = dm644x_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + aemif_clk = clk_get(NULL, "aemif"); clk_prepare_enable(aemif_clk); diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 2bc3651d56cc8f52757b3703c14daadf2360abeb..44b20191a9fed5359ed0b24344e0aeb15430d210 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -33,17 +33,19 @@ #include #include #include +#include +#include +#include +#include #include #include #include +#include #include -#include -#include #include #include -#include #include "davinci.h" #include "clock.h" @@ -786,8 +788,13 @@ static struct edma_rsv_info dm646x_edma_rsv[] = { static __init void evm_init(void) { + int ret; struct davinci_soc_info *soc_info = &davinci_soc_info; + ret = dm646x_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + evm_init_i2c(); davinci_serial_init(dm646x_serial_device); dm646x_init_mcasp0(&dm646x_evm_snd_data[0]); diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 46f336fca80384541257e667383d85080b718b1b..bb680af98374e2177702529fd179b0d78d377828 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -26,17 +26,18 @@ #include #include #include +#include +#include +#include +#include +#include #include #include #include -#include #include #include -#include -#include -#include #include "davinci.h" @@ -169,9 +170,14 @@ static struct davinci_mmc_config davinci_ntosd2_mmc_config = { static __init void davinci_ntosd2_init(void) { + int ret; struct clk *aemif_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; + ret = dm644x_gpio_register(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + aemif_clk = clk_get(NULL, "aemif"); clk_prepare_enable(aemif_clk); diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index e0de2da41b5cc3d88a94e06c8dc8f4bcfd918d32..2aac51d0e85325361d9406e2d5abd6b8f8b9383b 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -13,10 +13,12 @@ #include #include #include +#include #include #include +#include #include #include #include @@ -290,6 +292,10 @@ static __init void omapl138_hawk_init(void) { int ret; + ret = da850_register_gpio(); + if (ret) + pr_warn("%s: GPIO init failed: %d\n", __func__, ret); + davinci_serial_init(da8xx_serial_device); omapl138_hawk_config_emac(); diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index d6c746e35ad9fe196e947994de330fefda3e1962..0813b5167e059e1c7c32d82374bbdb6470eb9370 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -11,6 +11,7 @@ #include #include #include +#include #include @@ -20,7 +21,6 @@ #include #include #include -#include #include "clock.h" #include "mux.h" @@ -1151,6 +1151,16 @@ static struct davinci_id da830_ids[] = { }, }; +static struct davinci_gpio_platform_data da830_gpio_platform_data = { + .ngpio = 128, + .intc_irq_num = DA830_N_CP_INTC_IRQ, +}; + +int __init da830_register_gpio(void) +{ + return da8xx_register_gpio(&da830_gpio_platform_data); +} + static struct davinci_timer_instance da830_timer_instance[2] = { { .base = DA8XX_TIMER64P0_BASE, @@ -1196,10 +1206,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = { .intc_irq_prios = da830_default_priorities, .intc_irq_num = DA830_N_CP_INTC_IRQ, .timer_info = &da830_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DA8XX_GPIO_BASE, - .gpio_num = 128, - .gpio_irq = IRQ_DA8XX_GPIO0, .emac_pdata = &da8xx_emac_pdata, }; diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index f56e5fbfa2fd20ebd0a8fd18adaee48463e632b2..352984e1528a4ab08cdd2e52b072e841e6a895e1 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -17,6 +17,7 @@ #include #include #include +#include #include @@ -28,7 +29,6 @@ #include #include #include -#include #include "clock.h" #include "mux.h" @@ -1281,6 +1281,16 @@ int __init da850_register_vpif_capture(struct vpif_capture_config return platform_device_register(&da850_vpif_capture_dev); } +static struct davinci_gpio_platform_data da850_gpio_platform_data = { + .ngpio = 144, + .intc_irq_num = DA850_N_CP_INTC_IRQ, +}; + +int __init da850_register_gpio(void) +{ + return da8xx_register_gpio(&da850_gpio_platform_data); +} + static struct davinci_soc_info davinci_soc_info_da850 = { .io_desc = da850_io_desc, .io_desc_num = ARRAY_SIZE(da850_io_desc), @@ -1298,10 +1308,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = { .intc_irq_prios = da850_default_priorities, .intc_irq_num = DA850_N_CP_INTC_IRQ, .timer_info = &da850_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DA8XX_GPIO_BASE, - .gpio_num = 144, - .gpio_irq = IRQ_DA8XX_GPIO0, .emac_pdata = &da8xx_emac_pdata, .sram_dma = DA8XX_SHARED_RAM_BASE, .sram_len = SZ_128K, diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 2ab5d577186f4177fd06c414b31d25c21d295f8f..2eebc433880223b0ed2c5fe18c56aa11807cd699 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -53,6 +53,9 @@ extern void __iomem *davinci_sysmod_base; #define DAVINCI_SYSMOD_VIRT(x) (davinci_sysmod_base + (x)) void davinci_map_sysmod(void); +#define DAVINCI_GPIO_BASE 0x01C67000 +int davinci_gpio_register(struct resource *res, int size, void *pdata); + /* DM355 base addresses */ #define DM355_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DM355_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 @@ -82,6 +85,7 @@ void dm355_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); void dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata); int dm355_init_video(struct vpfe_config *, struct vpbe_config *); +int dm355_gpio_register(void); /* DM365 function declarations */ void dm365_init(void); @@ -92,11 +96,13 @@ void dm365_init_rtc(void); void dm365_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); int dm365_init_video(struct vpfe_config *, struct vpbe_config *); +int dm365_gpio_register(void); /* DM644x function declarations */ void dm644x_init(void); void dm644x_init_asp(struct snd_platform_data *pdata); int dm644x_init_video(struct vpfe_config *, struct vpbe_config *); +int dm644x_gpio_register(void); /* DM646x function declarations */ void dm646x_init(void); @@ -106,6 +112,7 @@ int dm646x_init_edma(struct edma_rsv_info *rsv); void dm646x_video_init(void); void dm646x_setup_vpif(struct vpif_display_config *, struct vpif_capture_config *); +int dm646x_gpio_register(void); extern struct platform_device dm365_serial_device[]; extern struct platform_device dm355_serial_device[]; diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 2e473fefd71ebc2049d490f554da0f8a70d2578b..c46eccbbd51226f5ae6ab5a16e1c89668c35fa1d 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -665,6 +665,32 @@ int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata) return platform_device_register(&da8xx_lcdc_device); } +static struct resource da8xx_gpio_resources[] = { + { /* registers */ + .start = DA8XX_GPIO_BASE, + .end = DA8XX_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DA8XX_GPIO0, + .end = IRQ_DA8XX_GPIO8, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da8xx_gpio_device = { + .name = "davinci_gpio", + .id = -1, + .num_resources = ARRAY_SIZE(da8xx_gpio_resources), + .resource = da8xx_gpio_resources, +}; + +int __init da8xx_register_gpio(void *pdata) +{ + da8xx_gpio_device.dev.platform_data = pdata; + return platform_device_register(&da8xx_gpio_device); +} + static struct resource da8xx_mmcsd0_resources[] = { { /* registers */ .start = DA8XX_MMCSD0_BASE, diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 111573c0aad144dacea6674a842ec15b2bfd110a..3996e98f52fbe0c4e8601bb2dc1b8d0932a8ffd9 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -318,6 +318,19 @@ static void davinci_init_wdt(void) platform_device_register(&davinci_wdt_device); } +static struct platform_device davinci_gpio_device = { + .name = "davinci_gpio", + .id = -1, +}; + +int davinci_gpio_register(struct resource *res, int size, void *pdata) +{ + davinci_gpio_device.resource = res; + davinci_gpio_device.num_resources = size; + davinci_gpio_device.dev.platform_data = pdata; + return platform_device_register(&davinci_gpio_device); +} + /*-------------------------------------------------------------------------*/ /*-------------------------------------------------------------------------*/ diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 3eaa5f6b2160593517463c2b18c211bbad93605e..ef9ff1fb6f52a2533378ba37563c06e877b32ea3 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -13,8 +13,10 @@ #include #include #include - #include +#include +#include +#include #include @@ -25,9 +27,6 @@ #include #include #include -#include -#include -#include #include "davinci.h" #include "clock.h" @@ -886,6 +885,30 @@ static struct platform_device dm355_vpbe_dev = { }, }; +static struct resource dm355_gpio_resources[] = { + { /* registers */ + .start = DAVINCI_GPIO_BASE, + .end = DAVINCI_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DM355_GPIOBNK0, + .end = IRQ_DM355_GPIOBNK6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct davinci_gpio_platform_data dm355_gpio_platform_data = { + .ngpio = 104, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, +}; + +int __init dm355_gpio_register(void) +{ + return davinci_gpio_register(dm355_gpio_resources, + sizeof(dm355_gpio_resources), + &dm355_gpio_platform_data); +} /*----------------------------------------------------------------------*/ static struct map_desc dm355_io_desc[] = { @@ -1005,10 +1028,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .intc_irq_prios = dm355_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm355_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DAVINCI_GPIO_BASE, - .gpio_num = 104, - .gpio_irq = IRQ_DM355_GPIOBNK0, .sram_dma = 0x00010000, .sram_len = SZ_32K, }; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index c29e324eb0bb75012d227da960e96fd60c2141f9..1511a0680f9a1d399cf3094b538c3c52caa06547 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -19,6 +19,9 @@ #include #include #include +#include +#include +#include #include @@ -29,9 +32,6 @@ #include #include #include -#include -#include -#include #include "davinci.h" #include "clock.h" @@ -698,6 +698,32 @@ void __init dm365_init_spi0(unsigned chipselect_mask, platform_device_register(&dm365_spi0_device); } +static struct resource dm365_gpio_resources[] = { + { /* registers */ + .start = DAVINCI_GPIO_BASE, + .end = DAVINCI_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DM365_GPIO0, + .end = IRQ_DM365_GPIO7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct davinci_gpio_platform_data dm365_gpio_platform_data = { + .ngpio = 104, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, + .gpio_unbanked = 8, +}; + +int __init dm365_gpio_register(void) +{ + return davinci_gpio_register(dm365_gpio_resources, + sizeof(dm365_gpio_resources), + &dm365_gpio_platform_data); +} + static struct emac_platform_data dm365_emac_pdata = { .ctrl_reg_offset = DM365_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM365_EMAC_CNTRL_MOD_OFFSET, @@ -1105,11 +1131,6 @@ static struct davinci_soc_info davinci_soc_info_dm365 = { .intc_irq_prios = dm365_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm365_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DAVINCI_GPIO_BASE, - .gpio_num = 104, - .gpio_irq = IRQ_DM365_GPIO0, - .gpio_unbanked = 8, /* really 16 ... skip muxed GPIOs */ .emac_pdata = &dm365_emac_pdata, .sram_dma = 0x00010000, .sram_len = SZ_32K, diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 4f74682293d6f162125ac176c54721e2260bf9d8..143a3217e8efb8fde1aa417700c45840d242aac0 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -13,6 +13,7 @@ #include #include #include +#include #include @@ -23,7 +24,6 @@ #include #include #include -#include #include "davinci.h" #include "clock.h" @@ -771,6 +771,30 @@ static struct platform_device dm644x_vpbe_dev = { }, }; +static struct resource dm644_gpio_resources[] = { + { /* registers */ + .start = DAVINCI_GPIO_BASE, + .end = DAVINCI_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_GPIOBNK0, + .end = IRQ_GPIOBNK4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct davinci_gpio_platform_data dm644_gpio_platform_data = { + .ngpio = 71, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, +}; + +int __init dm644x_gpio_register(void) +{ + return davinci_gpio_register(dm644_gpio_resources, + sizeof(dm644_gpio_resources), + &dm644_gpio_platform_data); +} /*----------------------------------------------------------------------*/ static struct map_desc dm644x_io_desc[] = { @@ -897,10 +921,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .intc_irq_prios = dm644x_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm644x_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DAVINCI_GPIO_BASE, - .gpio_num = 71, - .gpio_irq = IRQ_GPIOBNK0, .emac_pdata = &dm644x_emac_pdata, .sram_dma = 0x00008000, .sram_len = SZ_16K, diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 68f8d1f1aca1620d864307a28f449de956e287e6..2a73f299c1d094615236359d6ac27959cdd16295 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -14,6 +14,7 @@ #include #include #include +#include #include @@ -24,7 +25,6 @@ #include #include #include -#include #include "davinci.h" #include "clock.h" @@ -748,6 +748,30 @@ static struct platform_device vpif_capture_dev = { .num_resources = ARRAY_SIZE(vpif_capture_resource), }; +static struct resource dm646x_gpio_resources[] = { + { /* registers */ + .start = DAVINCI_GPIO_BASE, + .end = DAVINCI_GPIO_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + { /* interrupt */ + .start = IRQ_DM646X_GPIOBNK0, + .end = IRQ_DM646X_GPIOBNK2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct davinci_gpio_platform_data dm646x_gpio_platform_data = { + .ngpio = 43, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, +}; + +int __init dm646x_gpio_register(void) +{ + return davinci_gpio_register(dm646x_gpio_resources, + sizeof(dm646x_gpio_resources), + &dm646x_gpio_platform_data); +} /*----------------------------------------------------------------------*/ static struct map_desc dm646x_io_desc[] = { @@ -874,10 +898,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .intc_irq_prios = dm646x_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm646x_timer_info, - .gpio_type = GPIO_TYPE_DAVINCI, - .gpio_base = DAVINCI_GPIO_BASE, - .gpio_num = 43, /* Only 33 usable */ - .gpio_irq = IRQ_DM646X_GPIOBNK0, .emac_pdata = &dm646x_emac_pdata, .sram_dma = 0x10010000, .sram_len = SZ_32K, diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index aae53072c0eb602d536c1a0891258625347fc0df..39e58b48e826dc4350f54a0aa170444855723815 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -97,6 +97,7 @@ int da8xx_register_mmcsd0(struct davinci_mmc_config *config); int da850_register_mmcsd1(struct davinci_mmc_config *config); void da8xx_register_mcasp(int id, struct snd_platform_data *pdata); int da8xx_register_rtc(void); +int da8xx_register_gpio(void *pdata); int da850_register_cpufreq(char *async_clk); int da8xx_register_cpuidle(void); void __iomem *da8xx_get_mem_ctlr(void); @@ -110,6 +111,8 @@ int da850_register_vpif_capture void da8xx_restart(enum reboot_mode mode, const char *cmd); void da8xx_rproc_reserve_cma(void); int da8xx_register_rproc(void); +int da850_register_gpio(void); +int da830_register_gpio(void); extern struct platform_device da8xx_serial_device[]; extern struct emac_platform_data da8xx_emac_pdata; diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h deleted file mode 100644 index 1fdd1fd35448f9f0e49450be5624112a2b5111ec..0000000000000000000000000000000000000000 --- a/arch/arm/mach-davinci/include/mach/gpio-davinci.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * TI DaVinci GPIO Support - * - * Copyright (c) 2006 David Brownell - * Copyright (c) 2007, MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __DAVINCI_DAVINCI_GPIO_H -#define __DAVINCI_DAVINCI_GPIO_H - -#include -#include - -#include - -#include -#include - -#define DAVINCI_GPIO_BASE 0x01C67000 - -enum davinci_gpio_type { - GPIO_TYPE_DAVINCI = 0, - GPIO_TYPE_TNETV107X, -}; - -/* - * basic gpio routines - * - * board-specific init should be done by arch/.../.../board-XXX.c (maybe - * initializing banks together) rather than boot loaders; kexec() won't - * go through boot loaders. - * - * the gpio clock will be turned on when gpios are used, and you may also - * need to pay attention to PINMUX registers to be sure those pins are - * used as gpios, not with other peripherals. - * - * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation, - * and maybe for later updates, code may write GPIO(N). These may be - * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip - * may not support all the GPIOs in that range. - * - * GPIOs can also be on external chips, numbered after the ones built-in - * to the DaVinci chip. For now, they won't be usable as IRQ sources. - */ -#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ - -/* Convert GPIO signal to GPIO pin number */ -#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) - -struct davinci_gpio_controller { - struct gpio_chip chip; - int irq_base; - spinlock_t lock; - void __iomem *regs; - void __iomem *set_data; - void __iomem *clr_data; - void __iomem *in_data; -}; - -/* The __gpio_to_controller() and __gpio_mask() functions inline to constants - * with constant parameters; or in outlined code they execute at runtime. - * - * You'd access the controller directly when reading or writing more than - * one gpio value at a time, and to support wired logic where the value - * being driven by the cpu need not match the value read back. - * - * These are NOT part of the cross-platform GPIO interface - */ -static inline struct davinci_gpio_controller * -__gpio_to_controller(unsigned gpio) -{ - struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs; - int index = gpio / 32; - - if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num) - return NULL; - - return ctlrs + index; -} - -static inline u32 __gpio_mask(unsigned gpio) -{ - return 1 << (gpio % 32); -} - -#endif /* __DAVINCI_DAVINCI_GPIO_H */ diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h deleted file mode 100644 index 960e9de47e1e7549d30886b09fd4dbcb1c7991af..0000000000000000000000000000000000000000 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * TI DaVinci GPIO Support - * - * Copyright (c) 2006 David Brownell - * Copyright (c) 2007, MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __DAVINCI_GPIO_H -#define __DAVINCI_GPIO_H - -#include - -#define __ARM_GPIOLIB_COMPLEX - -/* The inline versions use the static inlines in the driver header */ -#include "gpio-davinci.h" - -/* - * The get/set/clear functions will inline when called with constant - * parameters referencing built-in GPIOs, for low-overhead bitbanging. - * - * gpio_set_value() will inline only on traditional Davinci style controllers - * with distinct set/clear registers. - * - * Otherwise, calls with variable parameters or referencing external - * GPIOs (e.g. on GPIO expander chips) use outlined functions. - */ -static inline void gpio_set_value(unsigned gpio, int value) -{ - if (__builtin_constant_p(value) && gpio < davinci_soc_info.gpio_num) { - struct davinci_gpio_controller *ctlr; - u32 mask; - - ctlr = __gpio_to_controller(gpio); - - if (ctlr->set_data != ctlr->clr_data) { - mask = __gpio_mask(gpio); - if (value) - __raw_writel(mask, ctlr->set_data); - else - __raw_writel(mask, ctlr->clr_data); - return; - } - } - - __gpio_set_value(gpio, value); -} - -/* Returns zero or nonzero; works for gpios configured as inputs OR - * as outputs, at least for built-in GPIOs. - * - * NOTE: for built-in GPIOs, changes in reported values are synchronized - * to the GPIO clock. This is easily seen after calling gpio_set_value() - * and then immediately gpio_get_value(), where the gpio_get_value() will - * return the old value until the GPIO clock ticks and the new value gets - * latched. - */ -static inline int gpio_get_value(unsigned gpio) -{ - struct davinci_gpio_controller *ctlr; - - if (!__builtin_constant_p(gpio) || gpio >= davinci_soc_info.gpio_num) - return __gpio_get_value(gpio); - - ctlr = __gpio_to_controller(gpio); - return __gpio_mask(gpio) & __raw_readl(ctlr->in_data); -} - -static inline int gpio_cansleep(unsigned gpio) -{ - if (__builtin_constant_p(gpio) && gpio < davinci_soc_info.gpio_num) - return 0; - else - return __gpio_cansleep(gpio); -} - -static inline int irq_to_gpio(unsigned irq) -{ - /* don't support the reverse mapping */ - return -ENOSYS; -} - -#endif /* __DAVINCI_GPIO_H */ diff --git a/arch/arm/mach-dove/board-dt.c b/arch/arm/mach-dove/board-dt.c index ddb86631f16ae7f929b08345bab7bb3cf8f89a69..49fa9abd09daec9097c81d58d2633feccd8ec6f4 100644 --- a/arch/arm/mach-dove/board-dt.c +++ b/arch/arm/mach-dove/board-dt.c @@ -19,35 +19,6 @@ #include #include "common.h" -/* - * There are still devices that doesn't even know about DT, - * get clock gates here and add a clock lookup. - */ -static void __init dove_legacy_clk_init(void) -{ - struct device_node *np = of_find_compatible_node(NULL, NULL, - "marvell,dove-gating-clock"); - struct of_phandle_args clkspec; - - clkspec.np = np; - clkspec.args_count = 1; - - clkspec.args[0] = CLOCK_GATING_BIT_PCIE0; - orion_clkdev_add("0", "pcie", - of_clk_get_from_provider(&clkspec)); - - clkspec.args[0] = CLOCK_GATING_BIT_PCIE1; - orion_clkdev_add("1", "pcie", - of_clk_get_from_provider(&clkspec)); -} - -static void __init dove_dt_init_early(void) -{ - mvebu_mbus_init("marvell,dove-mbus", - BRIDGE_WINS_BASE, BRIDGE_WINS_SZ, - DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ); -} - static void __init dove_dt_init(void) { pr_info("Dove 88AP510 SoC\n"); @@ -55,14 +26,7 @@ static void __init dove_dt_init(void) #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif - dove_setup_cpu_wins(); - - /* Setup clocks for legacy devices */ - dove_legacy_clk_init(); - - /* Internal devices not ported to DT yet */ - dove_pcie_init(1, 1); - + BUG_ON(mvebu_mbus_dt_init()); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -73,7 +37,6 @@ static const char * const dove_dt_board_compat[] = { DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)") .map_io = dove_map_io, - .init_early = dove_dt_init_early, .init_machine = dove_dt_init, .restart = dove_restart, .dt_compat = dove_dt_board_compat, diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index dba2173e70f3aceb69947dd06f9653b39deadbb7..8f1d327e0cd1566286a5f6530569dbf1bc530ca4 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -28,6 +28,7 @@ config CPU_S3C2410 select CPU_ARM920T select CPU_LLSERIAL_S3C2410 select S3C2410_CLOCK + select S3C2410_DMA if S3C24XX_DMA select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ select S3C2410_PM if PM select SAMSUNG_WDT_RESET @@ -70,6 +71,7 @@ config CPU_S3C2442 select CPU_ARM920T select CPU_LLSERIAL_S3C2440 select S3C2410_CLOCK + select S3C2410_DMA if S3C24XX_DMA select S3C2410_PM if PM help Support for S3C2442 Samsung Mobile CPU based systems. @@ -148,7 +150,6 @@ config S3C2410_DMA_DEBUG config S3C2410_DMA bool depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442) - default y if CPU_S3C2410 || CPU_S3C2442 help DMA device selection for S3C2410 and compatible CPUs diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c index d8f253f2b4862383888f633a400c2209aac352f5..11b3b28457bbce9130309d876f9239905f82e7e2 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2412.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2412.c @@ -484,22 +484,22 @@ static struct clk init_clocks_disable[] = { static struct clk init_clocks[] = { { - .name = "dma", + .name = "dma.0", .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_DMA0, }, { - .name = "dma", + .name = "dma.1", .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_DMA1, }, { - .name = "dma", + .name = "dma.2", .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_DMA2, }, { - .name = "dma", + .name = "dma.3", .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_DMA3, diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c index f6b9f2ef01bdde960504230f36f6db6a594a05a6..65d3eef7309040d4ccc5a71af5da8618327d8b60 100644 --- a/arch/arm/mach-s3c24xx/common-s3c2443.c +++ b/arch/arm/mach-s3c24xx/common-s3c2443.c @@ -438,32 +438,32 @@ static struct clk init_clocks_off[] = { static struct clk init_clocks[] = { { - .name = "dma", + .name = "dma.0", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA0, }, { - .name = "dma", + .name = "dma.1", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA1, }, { - .name = "dma", + .name = "dma.2", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA2, }, { - .name = "dma", + .name = "dma.3", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA3, }, { - .name = "dma", + .name = "dma.4", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA4, }, { - .name = "dma", + .name = "dma.5", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA5, diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c index 457261c984338815c7620c8c8eeed9c150b61e8d..4adaa4b43ffe5282f915d83dcdc3d4489c6eebe7 100644 --- a/arch/arm/mach-s3c24xx/common.c +++ b/arch/arm/mach-s3c24xx/common.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -44,6 +45,7 @@ #include #include +#include #include #include @@ -329,3 +331,207 @@ void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk, clk_p.rate = pclk; clk_f.rate = fclk; } + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ + defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) +static struct resource s3c2410_dma_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA), + [1] = DEFINE_RES_IRQ(IRQ_DMA0), + [2] = DEFINE_RES_IRQ(IRQ_DMA1), + [3] = DEFINE_RES_IRQ(IRQ_DMA2), + [4] = DEFINE_RES_IRQ(IRQ_DMA3), +}; +#endif + +#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2442) +static struct s3c24xx_dma_channel s3c2410_dma_channels[DMACH_MAX] = { + [DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), }, + [DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), }, + [DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) | + S3C24XX_DMA_CHANREQ(2, 2) | + S3C24XX_DMA_CHANREQ(1, 3), + }, + [DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), }, + [DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), }, + [DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), }, + [DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), }, + [DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), }, + [DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) | + S3C24XX_DMA_CHANREQ(3, 2) | + S3C24XX_DMA_CHANREQ(3, 3), + }, + [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) | + S3C24XX_DMA_CHANREQ(1, 2), + }, + [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 2), }, + [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), }, + [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), }, + [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), }, + [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), }, +}; + +static struct s3c24xx_dma_platdata s3c2410_dma_platdata = { + .num_phy_channels = 4, + .channels = s3c2410_dma_channels, + .num_channels = DMACH_MAX, +}; + +struct platform_device s3c2410_device_dma = { + .name = "s3c2410-dma", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dma_resource), + .resource = s3c2410_dma_resource, + .dev = { + .platform_data = &s3c2410_dma_platdata, + }, +}; +#endif + +#ifdef CONFIG_CPU_S3C2412 +static struct s3c24xx_dma_channel s3c2412_dma_channels[DMACH_MAX] = { + [DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 }, + [DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 }, + [DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 }, + [DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 }, + [DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 }, + [DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 }, + [DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 }, + [DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 }, + [DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 }, + [DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 }, + [DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 }, + [DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 }, + [DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 }, + [DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 }, + [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 }, + [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 }, + [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, 13 }, + [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, 14 }, + [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, 15 }, + [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, 16 }, +}; + +static struct s3c24xx_dma_platdata s3c2412_dma_platdata = { + .num_phy_channels = 4, + .channels = s3c2412_dma_channels, + .num_channels = DMACH_MAX, +}; + +struct platform_device s3c2412_device_dma = { + .name = "s3c2412-dma", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dma_resource), + .resource = s3c2410_dma_resource, + .dev = { + .platform_data = &s3c2412_dma_platdata, + }, +}; +#endif + +#if defined(CONFIG_CPU_S3C2440) +static struct s3c24xx_dma_channel s3c2440_dma_channels[DMACH_MAX] = { + [DMACH_XD0] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 0), }, + [DMACH_XD1] = { S3C24XX_DMA_AHB, true, S3C24XX_DMA_CHANREQ(0, 1), }, + [DMACH_SDI] = { S3C24XX_DMA_APB, false, S3C24XX_DMA_CHANREQ(2, 0) | + S3C24XX_DMA_CHANREQ(6, 1) | + S3C24XX_DMA_CHANREQ(2, 2) | + S3C24XX_DMA_CHANREQ(1, 3), + }, + [DMACH_SPI0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 1), }, + [DMACH_SPI1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 3), }, + [DMACH_UART0] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 0), }, + [DMACH_UART1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(1, 1), }, + [DMACH_UART2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(0, 3), }, + [DMACH_TIMER] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(3, 0) | + S3C24XX_DMA_CHANREQ(3, 2) | + S3C24XX_DMA_CHANREQ(3, 3), + }, + [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(2, 1) | + S3C24XX_DMA_CHANREQ(1, 2), + }, + [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 0) | + S3C24XX_DMA_CHANREQ(0, 2), + }, + [DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 0) | + S3C24XX_DMA_CHANREQ(5, 2), + }, + [DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(5, 1) | + S3C24XX_DMA_CHANREQ(6, 3), + }, + [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(6, 2) | + S3C24XX_DMA_CHANREQ(5, 3), + }, + [DMACH_USB_EP1] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 0), }, + [DMACH_USB_EP2] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 1), }, + [DMACH_USB_EP3] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 2), }, + [DMACH_USB_EP4] = { S3C24XX_DMA_APB, true, S3C24XX_DMA_CHANREQ(4, 3), }, +}; + +static struct s3c24xx_dma_platdata s3c2440_dma_platdata = { + .num_phy_channels = 4, + .channels = s3c2440_dma_channels, + .num_channels = DMACH_MAX, +}; + +struct platform_device s3c2440_device_dma = { + .name = "s3c2410-dma", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2410_dma_resource), + .resource = s3c2410_dma_resource, + .dev = { + .platform_data = &s3c2440_dma_platdata, + }, +}; +#endif + +#if defined(CONFIG_CPUS_3C2443) || defined(CONFIG_CPU_S3C2416) +static struct resource s3c2443_dma_resource[] = { + [0] = DEFINE_RES_MEM(S3C24XX_PA_DMA, S3C24XX_SZ_DMA), + [1] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA0), + [2] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA1), + [3] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA2), + [4] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA3), + [5] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA4), + [6] = DEFINE_RES_IRQ(IRQ_S3C2443_DMA5), +}; + +static struct s3c24xx_dma_channel s3c2443_dma_channels[DMACH_MAX] = { + [DMACH_XD0] = { S3C24XX_DMA_AHB, true, 17 }, + [DMACH_XD1] = { S3C24XX_DMA_AHB, true, 18 }, + [DMACH_SDI] = { S3C24XX_DMA_APB, false, 10 }, + [DMACH_SPI0_RX] = { S3C24XX_DMA_APB, true, 1 }, + [DMACH_SPI0_TX] = { S3C24XX_DMA_APB, true, 0 }, + [DMACH_SPI1_RX] = { S3C24XX_DMA_APB, true, 3 }, + [DMACH_SPI1_TX] = { S3C24XX_DMA_APB, true, 2 }, + [DMACH_UART0] = { S3C24XX_DMA_APB, true, 19 }, + [DMACH_UART1] = { S3C24XX_DMA_APB, true, 21 }, + [DMACH_UART2] = { S3C24XX_DMA_APB, true, 23 }, + [DMACH_UART3] = { S3C24XX_DMA_APB, true, 25 }, + [DMACH_UART0_SRC2] = { S3C24XX_DMA_APB, true, 20 }, + [DMACH_UART1_SRC2] = { S3C24XX_DMA_APB, true, 22 }, + [DMACH_UART2_SRC2] = { S3C24XX_DMA_APB, true, 24 }, + [DMACH_UART3_SRC2] = { S3C24XX_DMA_APB, true, 26 }, + [DMACH_TIMER] = { S3C24XX_DMA_APB, true, 9 }, + [DMACH_I2S_IN] = { S3C24XX_DMA_APB, true, 5 }, + [DMACH_I2S_OUT] = { S3C24XX_DMA_APB, true, 4 }, + [DMACH_PCM_IN] = { S3C24XX_DMA_APB, true, 28 }, + [DMACH_PCM_OUT] = { S3C24XX_DMA_APB, true, 27 }, + [DMACH_MIC_IN] = { S3C24XX_DMA_APB, true, 29 }, +}; + +static struct s3c24xx_dma_platdata s3c2443_dma_platdata = { + .num_phy_channels = 6, + .channels = s3c2443_dma_channels, + .num_channels = DMACH_MAX, +}; + +struct platform_device s3c2443_device_dma = { + .name = "s3c2443-dma", + .id = 0, + .num_resources = ARRAY_SIZE(s3c2443_dma_resource), + .resource = s3c2443_dma_resource, + .dev = { + .platform_data = &s3c2443_dma_platdata, + }, +}; +#endif diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h index 84b280654f4cf331252199ae2c5b2b17fcc072da..e46c1041721669e3503555cadff0c6bbbcaaf3df 100644 --- a/arch/arm/mach-s3c24xx/common.h +++ b/arch/arm/mach-s3c24xx/common.h @@ -109,4 +109,9 @@ extern void s3c2443_init_irq(void); extern struct syscore_ops s3c24xx_irq_syscore_ops; +extern struct platform_device s3c2410_device_dma; +extern struct platform_device s3c2412_device_dma; +extern struct platform_device s3c2440_device_dma; +extern struct platform_device s3c2443_device_dma; + #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */ diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c index a45fcd8ccf796016c9007d0d7a44e089f30a9497..43c23e220f5b5823eb0831fe68f52430fb06f475 100644 --- a/arch/arm/mach-s3c24xx/mach-jive.c +++ b/arch/arm/mach-s3c24xx/mach-jive.c @@ -466,6 +466,7 @@ static struct platform_device *jive_devices[] __initdata = { &jive_device_wm8750, &s3c_device_nand, &s3c_device_usbgadget, + &s3c2412_device_dma, }; static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = { diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c index 8146e920f10d67313bbae45ddc81f47735eb67d1..c9d31ef28dd107073e63f5736437112804999ba9 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2413.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c @@ -89,6 +89,7 @@ static struct platform_device *smdk2413_devices[] __initdata = { &s3c_device_i2c0, &s3c_device_iis, &s3c_device_usbgadget, + &s3c2412_device_dma, }; static void __init smdk2413_fixup(struct tag *tags, char **cmdline, diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c index cb46847c66b4a71c50272a4d847ca49356266742..f88e672ad1e42786e57dc62cca8df9763fb0f5cc 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2416.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c @@ -215,6 +215,7 @@ static struct platform_device *smdk2416_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_usb_hsudc, + &s3c2443_device_dma, }; static void __init smdk2416_map_io(void) diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c index 9435c3bef18a91c53da53dcc29e68498bc834946..d9933fcc6cc8bb8526af7808c28a5250c2ae2be1 100644 --- a/arch/arm/mach-s3c24xx/mach-smdk2443.c +++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c @@ -115,6 +115,7 @@ static struct platform_device *smdk2443_devices[] __initdata = { #ifdef CONFIG_SND_SOC_SMDK2443_WM9710 &s3c_device_ac97, #endif + &s3c2443_device_dma, }; static void __init smdk2443_map_io(void) diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c index b66588428ec90e7b0d4c056f60e8ddc2e5dc36be..f7ec9c55078748782cd3110c8b4cea81a5afc408 100644 --- a/arch/arm/mach-s3c24xx/mach-vstms.c +++ b/arch/arm/mach-s3c24xx/mach-vstms.c @@ -126,6 +126,7 @@ static struct platform_device *vstms_devices[] __initdata = { &s3c_device_iis, &s3c_device_rtc, &s3c_device_nand, + &s3c2412_device_dma, }; static void __init vstms_fixup(struct tag *tags, char **cmdline, diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 25f40c9b7f629aeffa31472ef6f31187aa2162ef..99a3590f034949cc45bc99df724857e096888e51 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -32,6 +32,7 @@ #include #include #include +#include #include @@ -1465,8 +1466,10 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, pd.num_cs = num_cs; pd.src_clk_nr = src_clk_nr; pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio; -#ifdef CONFIG_PL330_DMA +#if defined(CONFIG_PL330_DMA) pd.filter = pl330_filter; +#elif defined(CONFIG_S3C24XX_DMAC) + pd.filter = s3c24xx_dma_filter; #endif s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0); diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c index 200926699778e2a0ec2605429362f92282494a56..bb5b90e8e7687a0b71d33aae92f7050f741a6fa9 100644 --- a/drivers/bus/arm-cci.c +++ b/drivers/bus/arm-cci.c @@ -18,11 +18,21 @@ #include #include #include +#include +#include +#include #include +#include #include +#include +#include #include +#define DRIVER_NAME "CCI-400" +#define DRIVER_NAME_PMU DRIVER_NAME " PMU" +#define PMU_NAME "CCI_400" + #define CCI_PORT_CTRL 0x0 #define CCI_CTRL_STATUS 0xc @@ -54,6 +64,568 @@ static unsigned int nb_cci_ports; static void __iomem *cci_ctrl_base; static unsigned long cci_ctrl_phys; +#ifdef CONFIG_HW_PERF_EVENTS + +#define CCI_PMCR 0x0100 +#define CCI_PID2 0x0fe8 + +#define CCI_PMCR_CEN 0x00000001 +#define CCI_PMCR_NCNT_MASK 0x0000f800 +#define CCI_PMCR_NCNT_SHIFT 11 + +#define CCI_PID2_REV_MASK 0xf0 +#define CCI_PID2_REV_SHIFT 4 + +/* Port ids */ +#define CCI_PORT_S0 0 +#define CCI_PORT_S1 1 +#define CCI_PORT_S2 2 +#define CCI_PORT_S3 3 +#define CCI_PORT_S4 4 +#define CCI_PORT_M0 5 +#define CCI_PORT_M1 6 +#define CCI_PORT_M2 7 + +#define CCI_REV_R0 0 +#define CCI_REV_R1 1 +#define CCI_REV_R0_P4 4 +#define CCI_REV_R1_P2 6 + +#define CCI_PMU_EVT_SEL 0x000 +#define CCI_PMU_CNTR 0x004 +#define CCI_PMU_CNTR_CTRL 0x008 +#define CCI_PMU_OVRFLW 0x00c + +#define CCI_PMU_OVRFLW_FLAG 1 + +#define CCI_PMU_CNTR_BASE(idx) ((idx) * SZ_4K) + +/* + * Instead of an event id to monitor CCI cycles, a dedicated counter is + * provided. Use 0xff to represent CCI cycles and hope that no future revisions + * make use of this event in hardware. + */ +enum cci400_perf_events { + CCI_PMU_CYCLES = 0xff +}; + +#define CCI_PMU_EVENT_MASK 0xff +#define CCI_PMU_EVENT_SOURCE(event) ((event >> 5) & 0x7) +#define CCI_PMU_EVENT_CODE(event) (event & 0x1f) + +#define CCI_PMU_MAX_HW_EVENTS 5 /* CCI PMU has 4 counters + 1 cycle counter */ + +#define CCI_PMU_CYCLE_CNTR_IDX 0 +#define CCI_PMU_CNTR0_IDX 1 +#define CCI_PMU_CNTR_LAST(cci_pmu) (CCI_PMU_CYCLE_CNTR_IDX + cci_pmu->num_events - 1) + +/* + * CCI PMU event id is an 8-bit value made of two parts - bits 7:5 for one of 8 + * ports and bits 4:0 are event codes. There are different event codes + * associated with each port type. + * + * Additionally, the range of events associated with the port types changed + * between Rev0 and Rev1. + * + * The constants below define the range of valid codes for each port type for + * the different revisions and are used to validate the event to be monitored. + */ + +#define CCI_REV_R0_SLAVE_PORT_MIN_EV 0x00 +#define CCI_REV_R0_SLAVE_PORT_MAX_EV 0x13 +#define CCI_REV_R0_MASTER_PORT_MIN_EV 0x14 +#define CCI_REV_R0_MASTER_PORT_MAX_EV 0x1a + +#define CCI_REV_R1_SLAVE_PORT_MIN_EV 0x00 +#define CCI_REV_R1_SLAVE_PORT_MAX_EV 0x14 +#define CCI_REV_R1_MASTER_PORT_MIN_EV 0x00 +#define CCI_REV_R1_MASTER_PORT_MAX_EV 0x11 + +struct pmu_port_event_ranges { + u8 slave_min; + u8 slave_max; + u8 master_min; + u8 master_max; +}; + +static struct pmu_port_event_ranges port_event_range[] = { + [CCI_REV_R0] = { + .slave_min = CCI_REV_R0_SLAVE_PORT_MIN_EV, + .slave_max = CCI_REV_R0_SLAVE_PORT_MAX_EV, + .master_min = CCI_REV_R0_MASTER_PORT_MIN_EV, + .master_max = CCI_REV_R0_MASTER_PORT_MAX_EV, + }, + [CCI_REV_R1] = { + .slave_min = CCI_REV_R1_SLAVE_PORT_MIN_EV, + .slave_max = CCI_REV_R1_SLAVE_PORT_MAX_EV, + .master_min = CCI_REV_R1_MASTER_PORT_MIN_EV, + .master_max = CCI_REV_R1_MASTER_PORT_MAX_EV, + }, +}; + +struct cci_pmu_drv_data { + void __iomem *base; + struct arm_pmu *cci_pmu; + int nr_irqs; + int irqs[CCI_PMU_MAX_HW_EVENTS]; + unsigned long active_irqs; + struct perf_event *events[CCI_PMU_MAX_HW_EVENTS]; + unsigned long used_mask[BITS_TO_LONGS(CCI_PMU_MAX_HW_EVENTS)]; + struct pmu_port_event_ranges *port_ranges; + struct pmu_hw_events hw_events; +}; +static struct cci_pmu_drv_data *pmu; + +static bool is_duplicate_irq(int irq, int *irqs, int nr_irqs) +{ + int i; + + for (i = 0; i < nr_irqs; i++) + if (irq == irqs[i]) + return true; + + return false; +} + +static int probe_cci_revision(void) +{ + int rev; + rev = readl_relaxed(cci_ctrl_base + CCI_PID2) & CCI_PID2_REV_MASK; + rev >>= CCI_PID2_REV_SHIFT; + + if (rev <= CCI_REV_R0_P4) + return CCI_REV_R0; + else if (rev <= CCI_REV_R1_P2) + return CCI_REV_R1; + + return -ENOENT; +} + +static struct pmu_port_event_ranges *port_range_by_rev(void) +{ + int rev = probe_cci_revision(); + + if (rev < 0) + return NULL; + + return &port_event_range[rev]; +} + +static int pmu_is_valid_slave_event(u8 ev_code) +{ + return pmu->port_ranges->slave_min <= ev_code && + ev_code <= pmu->port_ranges->slave_max; +} + +static int pmu_is_valid_master_event(u8 ev_code) +{ + return pmu->port_ranges->master_min <= ev_code && + ev_code <= pmu->port_ranges->master_max; +} + +static int pmu_validate_hw_event(u8 hw_event) +{ + u8 ev_source = CCI_PMU_EVENT_SOURCE(hw_event); + u8 ev_code = CCI_PMU_EVENT_CODE(hw_event); + + switch (ev_source) { + case CCI_PORT_S0: + case CCI_PORT_S1: + case CCI_PORT_S2: + case CCI_PORT_S3: + case CCI_PORT_S4: + /* Slave Interface */ + if (pmu_is_valid_slave_event(ev_code)) + return hw_event; + break; + case CCI_PORT_M0: + case CCI_PORT_M1: + case CCI_PORT_M2: + /* Master Interface */ + if (pmu_is_valid_master_event(ev_code)) + return hw_event; + break; + } + + return -ENOENT; +} + +static int pmu_is_valid_counter(struct arm_pmu *cci_pmu, int idx) +{ + return CCI_PMU_CYCLE_CNTR_IDX <= idx && + idx <= CCI_PMU_CNTR_LAST(cci_pmu); +} + +static u32 pmu_read_register(int idx, unsigned int offset) +{ + return readl_relaxed(pmu->base + CCI_PMU_CNTR_BASE(idx) + offset); +} + +static void pmu_write_register(u32 value, int idx, unsigned int offset) +{ + return writel_relaxed(value, pmu->base + CCI_PMU_CNTR_BASE(idx) + offset); +} + +static void pmu_disable_counter(int idx) +{ + pmu_write_register(0, idx, CCI_PMU_CNTR_CTRL); +} + +static void pmu_enable_counter(int idx) +{ + pmu_write_register(1, idx, CCI_PMU_CNTR_CTRL); +} + +static void pmu_set_event(int idx, unsigned long event) +{ + event &= CCI_PMU_EVENT_MASK; + pmu_write_register(event, idx, CCI_PMU_EVT_SEL); +} + +static u32 pmu_get_max_counters(void) +{ + u32 n_cnts = (readl_relaxed(cci_ctrl_base + CCI_PMCR) & + CCI_PMCR_NCNT_MASK) >> CCI_PMCR_NCNT_SHIFT; + + /* add 1 for cycle counter */ + return n_cnts + 1; +} + +static struct pmu_hw_events *pmu_get_hw_events(void) +{ + return &pmu->hw_events; +} + +static int pmu_get_event_idx(struct pmu_hw_events *hw, struct perf_event *event) +{ + struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hw_event = &event->hw; + unsigned long cci_event = hw_event->config_base & CCI_PMU_EVENT_MASK; + int idx; + + if (cci_event == CCI_PMU_CYCLES) { + if (test_and_set_bit(CCI_PMU_CYCLE_CNTR_IDX, hw->used_mask)) + return -EAGAIN; + + return CCI_PMU_CYCLE_CNTR_IDX; + } + + for (idx = CCI_PMU_CNTR0_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); ++idx) + if (!test_and_set_bit(idx, hw->used_mask)) + return idx; + + /* No counters available */ + return -EAGAIN; +} + +static int pmu_map_event(struct perf_event *event) +{ + int mapping; + u8 config = event->attr.config & CCI_PMU_EVENT_MASK; + + if (event->attr.type < PERF_TYPE_MAX) + return -ENOENT; + + if (config == CCI_PMU_CYCLES) + mapping = config; + else + mapping = pmu_validate_hw_event(config); + + return mapping; +} + +static int pmu_request_irq(struct arm_pmu *cci_pmu, irq_handler_t handler) +{ + int i; + struct platform_device *pmu_device = cci_pmu->plat_device; + + if (unlikely(!pmu_device)) + return -ENODEV; + + if (pmu->nr_irqs < 1) { + dev_err(&pmu_device->dev, "no irqs for CCI PMUs defined\n"); + return -ENODEV; + } + + /* + * Register all available CCI PMU interrupts. In the interrupt handler + * we iterate over the counters checking for interrupt source (the + * overflowing counter) and clear it. + * + * This should allow handling of non-unique interrupt for the counters. + */ + for (i = 0; i < pmu->nr_irqs; i++) { + int err = request_irq(pmu->irqs[i], handler, IRQF_SHARED, + "arm-cci-pmu", cci_pmu); + if (err) { + dev_err(&pmu_device->dev, "unable to request IRQ%d for ARM CCI PMU counters\n", + pmu->irqs[i]); + return err; + } + + set_bit(i, &pmu->active_irqs); + } + + return 0; +} + +static irqreturn_t pmu_handle_irq(int irq_num, void *dev) +{ + unsigned long flags; + struct arm_pmu *cci_pmu = (struct arm_pmu *)dev; + struct pmu_hw_events *events = cci_pmu->get_hw_events(); + struct perf_sample_data data; + struct pt_regs *regs; + int idx, handled = IRQ_NONE; + + raw_spin_lock_irqsave(&events->pmu_lock, flags); + regs = get_irq_regs(); + /* + * Iterate over counters and update the corresponding perf events. + * This should work regardless of whether we have per-counter overflow + * interrupt or a combined overflow interrupt. + */ + for (idx = CCI_PMU_CYCLE_CNTR_IDX; idx <= CCI_PMU_CNTR_LAST(cci_pmu); idx++) { + struct perf_event *event = events->events[idx]; + struct hw_perf_event *hw_counter; + + if (!event) + continue; + + hw_counter = &event->hw; + + /* Did this counter overflow? */ + if (!pmu_read_register(idx, CCI_PMU_OVRFLW) & CCI_PMU_OVRFLW_FLAG) + continue; + + pmu_write_register(CCI_PMU_OVRFLW_FLAG, idx, CCI_PMU_OVRFLW); + + handled = IRQ_HANDLED; + + armpmu_event_update(event); + perf_sample_data_init(&data, 0, hw_counter->last_period); + if (!armpmu_event_set_period(event)) + continue; + + if (perf_event_overflow(event, &data, regs)) + cci_pmu->disable(event); + } + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); + + return IRQ_RETVAL(handled); +} + +static void pmu_free_irq(struct arm_pmu *cci_pmu) +{ + int i; + + for (i = 0; i < pmu->nr_irqs; i++) { + if (!test_and_clear_bit(i, &pmu->active_irqs)) + continue; + + free_irq(pmu->irqs[i], cci_pmu); + } +} + +static void pmu_enable_event(struct perf_event *event) +{ + unsigned long flags; + struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu); + struct pmu_hw_events *events = cci_pmu->get_hw_events(); + struct hw_perf_event *hw_counter = &event->hw; + int idx = hw_counter->idx; + + if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) { + dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx); + return; + } + + raw_spin_lock_irqsave(&events->pmu_lock, flags); + + /* Configure the event to count, unless you are counting cycles */ + if (idx != CCI_PMU_CYCLE_CNTR_IDX) + pmu_set_event(idx, hw_counter->config_base); + + pmu_enable_counter(idx); + + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static void pmu_disable_event(struct perf_event *event) +{ + struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hw_counter = &event->hw; + int idx = hw_counter->idx; + + if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) { + dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx); + return; + } + + pmu_disable_counter(idx); +} + +static void pmu_start(struct arm_pmu *cci_pmu) +{ + u32 val; + unsigned long flags; + struct pmu_hw_events *events = cci_pmu->get_hw_events(); + + raw_spin_lock_irqsave(&events->pmu_lock, flags); + + /* Enable all the PMU counters. */ + val = readl_relaxed(cci_ctrl_base + CCI_PMCR) | CCI_PMCR_CEN; + writel(val, cci_ctrl_base + CCI_PMCR); + + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static void pmu_stop(struct arm_pmu *cci_pmu) +{ + u32 val; + unsigned long flags; + struct pmu_hw_events *events = cci_pmu->get_hw_events(); + + raw_spin_lock_irqsave(&events->pmu_lock, flags); + + /* Disable all the PMU counters. */ + val = readl_relaxed(cci_ctrl_base + CCI_PMCR) & ~CCI_PMCR_CEN; + writel(val, cci_ctrl_base + CCI_PMCR); + + raw_spin_unlock_irqrestore(&events->pmu_lock, flags); +} + +static u32 pmu_read_counter(struct perf_event *event) +{ + struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hw_counter = &event->hw; + int idx = hw_counter->idx; + u32 value; + + if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) { + dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx); + return 0; + } + value = pmu_read_register(idx, CCI_PMU_CNTR); + + return value; +} + +static void pmu_write_counter(struct perf_event *event, u32 value) +{ + struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu); + struct hw_perf_event *hw_counter = &event->hw; + int idx = hw_counter->idx; + + if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) + dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx); + else + pmu_write_register(value, idx, CCI_PMU_CNTR); +} + +static int cci_pmu_init(struct arm_pmu *cci_pmu, struct platform_device *pdev) +{ + *cci_pmu = (struct arm_pmu){ + .name = PMU_NAME, + .max_period = (1LLU << 32) - 1, + .get_hw_events = pmu_get_hw_events, + .get_event_idx = pmu_get_event_idx, + .map_event = pmu_map_event, + .request_irq = pmu_request_irq, + .handle_irq = pmu_handle_irq, + .free_irq = pmu_free_irq, + .enable = pmu_enable_event, + .disable = pmu_disable_event, + .start = pmu_start, + .stop = pmu_stop, + .read_counter = pmu_read_counter, + .write_counter = pmu_write_counter, + }; + + cci_pmu->plat_device = pdev; + cci_pmu->num_events = pmu_get_max_counters(); + + return armpmu_register(cci_pmu, -1); +} + +static const struct of_device_id arm_cci_pmu_matches[] = { + { + .compatible = "arm,cci-400-pmu", + }, + {}, +}; + +static int cci_pmu_probe(struct platform_device *pdev) +{ + struct resource *res; + int i, ret, irq; + + pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL); + if (!pmu) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + pmu->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(pmu->base)) + return -ENOMEM; + + /* + * CCI PMU has 5 overflow signals - one per counter; but some may be tied + * together to a common interrupt. + */ + pmu->nr_irqs = 0; + for (i = 0; i < CCI_PMU_MAX_HW_EVENTS; i++) { + irq = platform_get_irq(pdev, i); + if (irq < 0) + break; + + if (is_duplicate_irq(irq, pmu->irqs, pmu->nr_irqs)) + continue; + + pmu->irqs[pmu->nr_irqs++] = irq; + } + + /* + * Ensure that the device tree has as many interrupts as the number + * of counters. + */ + if (i < CCI_PMU_MAX_HW_EVENTS) { + dev_warn(&pdev->dev, "In-correct number of interrupts: %d, should be %d\n", + i, CCI_PMU_MAX_HW_EVENTS); + return -EINVAL; + } + + pmu->port_ranges = port_range_by_rev(); + if (!pmu->port_ranges) { + dev_warn(&pdev->dev, "CCI PMU version not supported\n"); + return -EINVAL; + } + + pmu->cci_pmu = devm_kzalloc(&pdev->dev, sizeof(*(pmu->cci_pmu)), GFP_KERNEL); + if (!pmu->cci_pmu) + return -ENOMEM; + + pmu->hw_events.events = pmu->events; + pmu->hw_events.used_mask = pmu->used_mask; + raw_spin_lock_init(&pmu->hw_events.pmu_lock); + + ret = cci_pmu_init(pmu->cci_pmu, pdev); + if (ret) + return ret; + + return 0; +} + +static int cci_platform_probe(struct platform_device *pdev) +{ + if (!cci_probed()) + return -ENODEV; + + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); +} + +#endif /* CONFIG_HW_PERF_EVENTS */ + struct cpu_port { u64 mpidr; u32 port; @@ -120,7 +692,7 @@ int cci_ace_get_port(struct device_node *dn) } EXPORT_SYMBOL_GPL(cci_ace_get_port); -static void __init cci_ace_init_ports(void) +static void cci_ace_init_ports(void) { int port, cpu; struct device_node *cpun; @@ -386,7 +958,7 @@ static const struct of_device_id arm_cci_ctrl_if_matches[] = { {}, }; -static int __init cci_probe(void) +static int cci_probe(void) { struct cci_nb_ports const *cci_config; int ret, i, nb_ace = 0, nb_ace_lite = 0; @@ -490,7 +1062,7 @@ static int __init cci_probe(void) static int cci_init_status = -EAGAIN; static DEFINE_MUTEX(cci_probing); -static int __init cci_init(void) +static int cci_init(void) { if (cci_init_status != -EAGAIN) return cci_init_status; @@ -502,18 +1074,55 @@ static int __init cci_init(void) return cci_init_status; } +#ifdef CONFIG_HW_PERF_EVENTS +static struct platform_driver cci_pmu_driver = { + .driver = { + .name = DRIVER_NAME_PMU, + .of_match_table = arm_cci_pmu_matches, + }, + .probe = cci_pmu_probe, +}; + +static struct platform_driver cci_platform_driver = { + .driver = { + .name = DRIVER_NAME, + .of_match_table = arm_cci_matches, + }, + .probe = cci_platform_probe, +}; + +static int __init cci_platform_init(void) +{ + int ret; + + ret = platform_driver_register(&cci_pmu_driver); + if (ret) + return ret; + + return platform_driver_register(&cci_platform_driver); +} + +#else + +static int __init cci_platform_init(void) +{ + return 0; +} + +#endif /* * To sort out early init calls ordering a helper function is provided to * check if the CCI driver has beed initialized. Function check if the driver * has been initialized, if not it calls the init function that probes * the driver and updates the return value. */ -bool __init cci_probed(void) +bool cci_probed(void) { return cci_init() == 0; } EXPORT_SYMBOL_GPL(cci_probed); early_initcall(cci_init); +core_initcall(cci_platform_init); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("ARM CCI support"); diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 56fe803adcb14598db268736423b337af3ddf83f..c61a6eccf16958ff2145d1b7971d17da92aa9032 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -154,6 +154,18 @@ config TEGRA20_APB_DMA This DMA controller transfers data from memory to peripheral fifo or vice versa. It does not support memory to memory data transfer. +config S3C24XX_DMAC + tristate "Samsung S3C24XX DMA support" + depends on ARCH_S3C24XX && !S3C24XX_DMA + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + help + Support for the Samsung S3C24XX DMA controller driver. The + DMA controller is having multiple DMA channels which can be + configured for different peripherals like audio, UART, SPI. + The DMA controller can transfer data from memory to peripheral, + periphal to memory, periphal to periphal and memory to memory. + source "drivers/dma/sh/Kconfig" config COH901318 diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index db89035b362612304a3334ab5c9834770cab1303..0ce2da97e42972b82a61197a4fe4bb52c35ceac4 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_SIRF_DMA) += sirf-dma.o obj-$(CONFIG_TI_EDMA) += edma.o obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o +obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o obj-$(CONFIG_PL330_DMA) += pl330.o obj-$(CONFIG_PCH_DMA) += pch_dma.o obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o diff --git a/drivers/dma/s3c24xx-dma.c b/drivers/dma/s3c24xx-dma.c new file mode 100644 index 0000000000000000000000000000000000000000..4cb12797863678be86af66017ec2cffb54f5dd16 --- /dev/null +++ b/drivers/dma/s3c24xx-dma.c @@ -0,0 +1,1350 @@ +/* + * S3C24XX DMA handling + * + * Copyright (c) 2013 Heiko Stuebner + * + * based on amba-pl08x.c + * + * Copyright (c) 2006 ARM Ltd. + * Copyright (c) 2010 ST-Ericsson SA + * + * Author: Peter Pearse + * Author: Linus Walleij + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * The DMA controllers in S3C24XX SoCs have a varying number of DMA signals + * that can be routed to any of the 4 to 8 hardware-channels. + * + * Therefore on these DMA controllers the number of channels + * and the number of incoming DMA signals are two totally different things. + * It is usually not possible to theoretically handle all physical signals, + * so a multiplexing scheme with possible denial of use is necessary. + * + * Open items: + * - bursts + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "dmaengine.h" +#include "virt-dma.h" + +#define MAX_DMA_CHANNELS 8 + +#define S3C24XX_DISRC 0x00 +#define S3C24XX_DISRCC 0x04 +#define S3C24XX_DISRCC_INC_INCREMENT 0 +#define S3C24XX_DISRCC_INC_FIXED BIT(0) +#define S3C24XX_DISRCC_LOC_AHB 0 +#define S3C24XX_DISRCC_LOC_APB BIT(1) + +#define S3C24XX_DIDST 0x08 +#define S3C24XX_DIDSTC 0x0c +#define S3C24XX_DIDSTC_INC_INCREMENT 0 +#define S3C24XX_DIDSTC_INC_FIXED BIT(0) +#define S3C24XX_DIDSTC_LOC_AHB 0 +#define S3C24XX_DIDSTC_LOC_APB BIT(1) +#define S3C24XX_DIDSTC_INT_TC0 0 +#define S3C24XX_DIDSTC_INT_RELOAD BIT(2) + +#define S3C24XX_DCON 0x10 + +#define S3C24XX_DCON_TC_MASK 0xfffff +#define S3C24XX_DCON_DSZ_BYTE (0 << 20) +#define S3C24XX_DCON_DSZ_HALFWORD (1 << 20) +#define S3C24XX_DCON_DSZ_WORD (2 << 20) +#define S3C24XX_DCON_DSZ_MASK (3 << 20) +#define S3C24XX_DCON_DSZ_SHIFT 20 +#define S3C24XX_DCON_AUTORELOAD 0 +#define S3C24XX_DCON_NORELOAD BIT(22) +#define S3C24XX_DCON_HWTRIG BIT(23) +#define S3C24XX_DCON_HWSRC_SHIFT 24 +#define S3C24XX_DCON_SERV_SINGLE 0 +#define S3C24XX_DCON_SERV_WHOLE BIT(27) +#define S3C24XX_DCON_TSZ_UNIT 0 +#define S3C24XX_DCON_TSZ_BURST4 BIT(28) +#define S3C24XX_DCON_INT BIT(29) +#define S3C24XX_DCON_SYNC_PCLK 0 +#define S3C24XX_DCON_SYNC_HCLK BIT(30) +#define S3C24XX_DCON_DEMAND 0 +#define S3C24XX_DCON_HANDSHAKE BIT(31) + +#define S3C24XX_DSTAT 0x14 +#define S3C24XX_DSTAT_STAT_BUSY BIT(20) +#define S3C24XX_DSTAT_CURRTC_MASK 0xfffff + +#define S3C24XX_DMASKTRIG 0x20 +#define S3C24XX_DMASKTRIG_SWTRIG BIT(0) +#define S3C24XX_DMASKTRIG_ON BIT(1) +#define S3C24XX_DMASKTRIG_STOP BIT(2) + +#define S3C24XX_DMAREQSEL 0x24 +#define S3C24XX_DMAREQSEL_HW BIT(0) + +/* + * S3C2410, S3C2440 and S3C2442 SoCs cannot select any physical channel + * for a DMA source. Instead only specific channels are valid. + * All of these SoCs have 4 physical channels and the number of request + * source bits is 3. Additionally we also need 1 bit to mark the channel + * as valid. + * Therefore we separate the chansel element of the channel data into 4 + * parts of 4 bits each, to hold the information if the channel is valid + * and the hw request source to use. + * + * Example: + * SDI is valid on channels 0, 2 and 3 - with varying hw request sources. + * For it the chansel field would look like + * + * ((BIT(3) | 1) << 3 * 4) | // channel 3, with request source 1 + * ((BIT(3) | 2) << 2 * 4) | // channel 2, with request source 2 + * ((BIT(3) | 2) << 0 * 4) // channel 0, with request source 2 + */ +#define S3C24XX_CHANSEL_WIDTH 4 +#define S3C24XX_CHANSEL_VALID BIT(3) +#define S3C24XX_CHANSEL_REQ_MASK 7 + +/* + * struct soc_data - vendor-specific config parameters for individual SoCs + * @stride: spacing between the registers of each channel + * @has_reqsel: does the controller use the newer requestselection mechanism + * @has_clocks: are controllable dma-clocks present + */ +struct soc_data { + int stride; + bool has_reqsel; + bool has_clocks; +}; + +/* + * enum s3c24xx_dma_chan_state - holds the virtual channel states + * @S3C24XX_DMA_CHAN_IDLE: the channel is idle + * @S3C24XX_DMA_CHAN_RUNNING: the channel has allocated a physical transport + * channel and is running a transfer on it + * @S3C24XX_DMA_CHAN_WAITING: the channel is waiting for a physical transport + * channel to become available (only pertains to memcpy channels) + */ +enum s3c24xx_dma_chan_state { + S3C24XX_DMA_CHAN_IDLE, + S3C24XX_DMA_CHAN_RUNNING, + S3C24XX_DMA_CHAN_WAITING, +}; + +/* + * struct s3c24xx_sg - structure containing data per sg + * @src_addr: src address of sg + * @dst_addr: dst address of sg + * @len: transfer len in bytes + * @node: node for txd's dsg_list + */ +struct s3c24xx_sg { + dma_addr_t src_addr; + dma_addr_t dst_addr; + size_t len; + struct list_head node; +}; + +/* + * struct s3c24xx_txd - wrapper for struct dma_async_tx_descriptor + * @vd: virtual DMA descriptor + * @dsg_list: list of children sg's + * @at: sg currently being transfered + * @width: transfer width + * @disrcc: value for source control register + * @didstc: value for destination control register + * @dcon: base value for dcon register + */ +struct s3c24xx_txd { + struct virt_dma_desc vd; + struct list_head dsg_list; + struct list_head *at; + u8 width; + u32 disrcc; + u32 didstc; + u32 dcon; +}; + +struct s3c24xx_dma_chan; + +/* + * struct s3c24xx_dma_phy - holder for the physical channels + * @id: physical index to this channel + * @valid: does the channel have all required elements + * @base: virtual memory base (remapped) for the this channel + * @irq: interrupt for this channel + * @clk: clock for this channel + * @lock: a lock to use when altering an instance of this struct + * @serving: virtual channel currently being served by this physicalchannel + * @host: a pointer to the host (internal use) + */ +struct s3c24xx_dma_phy { + unsigned int id; + bool valid; + void __iomem *base; + unsigned int irq; + struct clk *clk; + spinlock_t lock; + struct s3c24xx_dma_chan *serving; + struct s3c24xx_dma_engine *host; +}; + +/* + * struct s3c24xx_dma_chan - this structure wraps a DMA ENGINE channel + * @id: the id of the channel + * @name: name of the channel + * @vc: wrappped virtual channel + * @phy: the physical channel utilized by this channel, if there is one + * @runtime_addr: address for RX/TX according to the runtime config + * @at: active transaction on this channel + * @lock: a lock for this channel data + * @host: a pointer to the host (internal use) + * @state: whether the channel is idle, running etc + * @slave: whether this channel is a device (slave) or for memcpy + */ +struct s3c24xx_dma_chan { + int id; + const char *name; + struct virt_dma_chan vc; + struct s3c24xx_dma_phy *phy; + struct dma_slave_config cfg; + struct s3c24xx_txd *at; + struct s3c24xx_dma_engine *host; + enum s3c24xx_dma_chan_state state; + bool slave; +}; + +/* + * struct s3c24xx_dma_engine - the local state holder for the S3C24XX + * @pdev: the corresponding platform device + * @pdata: platform data passed in from the platform/machine + * @base: virtual memory base (remapped) + * @slave: slave engine for this instance + * @memcpy: memcpy engine for this instance + * @phy_chans: array of data for the physical channels + */ +struct s3c24xx_dma_engine { + struct platform_device *pdev; + const struct s3c24xx_dma_platdata *pdata; + struct soc_data *sdata; + void __iomem *base; + struct dma_device slave; + struct dma_device memcpy; + struct s3c24xx_dma_phy *phy_chans; +}; + +/* + * Physical channel handling + */ + +/* + * Check whether a certain channel is busy or not. + */ +static int s3c24xx_dma_phy_busy(struct s3c24xx_dma_phy *phy) +{ + unsigned int val = readl(phy->base + S3C24XX_DSTAT); + return val & S3C24XX_DSTAT_STAT_BUSY; +} + +static bool s3c24xx_dma_phy_valid(struct s3c24xx_dma_chan *s3cchan, + struct s3c24xx_dma_phy *phy) +{ + struct s3c24xx_dma_engine *s3cdma = s3cchan->host; + const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata; + struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id]; + int phyvalid; + + /* every phy is valid for memcopy channels */ + if (!s3cchan->slave) + return true; + + /* On newer variants all phys can be used for all virtual channels */ + if (s3cdma->sdata->has_reqsel) + return true; + + phyvalid = (cdata->chansel >> (phy->id * S3C24XX_CHANSEL_WIDTH)); + return (phyvalid & S3C24XX_CHANSEL_VALID) ? true : false; +} + +/* + * Allocate a physical channel for a virtual channel + * + * Try to locate a physical channel to be used for this transfer. If all + * are taken return NULL and the requester will have to cope by using + * some fallback PIO mode or retrying later. + */ +static +struct s3c24xx_dma_phy *s3c24xx_dma_get_phy(struct s3c24xx_dma_chan *s3cchan) +{ + struct s3c24xx_dma_engine *s3cdma = s3cchan->host; + const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata; + struct s3c24xx_dma_channel *cdata; + struct s3c24xx_dma_phy *phy = NULL; + unsigned long flags; + int i; + int ret; + + if (s3cchan->slave) + cdata = &pdata->channels[s3cchan->id]; + + for (i = 0; i < s3cdma->pdata->num_phy_channels; i++) { + phy = &s3cdma->phy_chans[i]; + + if (!phy->valid) + continue; + + if (!s3c24xx_dma_phy_valid(s3cchan, phy)) + continue; + + spin_lock_irqsave(&phy->lock, flags); + + if (!phy->serving) { + phy->serving = s3cchan; + spin_unlock_irqrestore(&phy->lock, flags); + break; + } + + spin_unlock_irqrestore(&phy->lock, flags); + } + + /* No physical channel available, cope with it */ + if (i == s3cdma->pdata->num_phy_channels) { + dev_warn(&s3cdma->pdev->dev, "no phy channel available\n"); + return NULL; + } + + /* start the phy clock */ + if (s3cdma->sdata->has_clocks) { + ret = clk_enable(phy->clk); + if (ret) { + dev_err(&s3cdma->pdev->dev, "could not enable clock for channel %d, err %d\n", + phy->id, ret); + phy->serving = NULL; + return NULL; + } + } + + return phy; +} + +/* + * Mark the physical channel as free. + * + * This drops the link between the physical and virtual channel. + */ +static inline void s3c24xx_dma_put_phy(struct s3c24xx_dma_phy *phy) +{ + struct s3c24xx_dma_engine *s3cdma = phy->host; + + if (s3cdma->sdata->has_clocks) + clk_disable(phy->clk); + + phy->serving = NULL; +} + +/* + * Stops the channel by writing the stop bit. + * This should not be used for an on-going transfer, but as a method of + * shutting down a channel (eg, when it's no longer used) or terminating a + * transfer. + */ +static void s3c24xx_dma_terminate_phy(struct s3c24xx_dma_phy *phy) +{ + writel(S3C24XX_DMASKTRIG_STOP, phy->base + S3C24XX_DMASKTRIG); +} + +/* + * Virtual channel handling + */ + +static inline +struct s3c24xx_dma_chan *to_s3c24xx_dma_chan(struct dma_chan *chan) +{ + return container_of(chan, struct s3c24xx_dma_chan, vc.chan); +} + +static u32 s3c24xx_dma_getbytes_chan(struct s3c24xx_dma_chan *s3cchan) +{ + struct s3c24xx_dma_phy *phy = s3cchan->phy; + struct s3c24xx_txd *txd = s3cchan->at; + u32 tc = readl(phy->base + S3C24XX_DSTAT) & S3C24XX_DSTAT_CURRTC_MASK; + + return tc * txd->width; +} + +static int s3c24xx_dma_set_runtime_config(struct s3c24xx_dma_chan *s3cchan, + struct dma_slave_config *config) +{ + if (!s3cchan->slave) + return -EINVAL; + + /* Reject definitely invalid configurations */ + if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES || + config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES) + return -EINVAL; + + s3cchan->cfg = *config; + + return 0; +} + +/* + * Transfer handling + */ + +static inline +struct s3c24xx_txd *to_s3c24xx_txd(struct dma_async_tx_descriptor *tx) +{ + return container_of(tx, struct s3c24xx_txd, vd.tx); +} + +static struct s3c24xx_txd *s3c24xx_dma_get_txd(void) +{ + struct s3c24xx_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT); + + if (txd) { + INIT_LIST_HEAD(&txd->dsg_list); + txd->dcon = S3C24XX_DCON_INT | S3C24XX_DCON_NORELOAD; + } + + return txd; +} + +static void s3c24xx_dma_free_txd(struct s3c24xx_txd *txd) +{ + struct s3c24xx_sg *dsg, *_dsg; + + list_for_each_entry_safe(dsg, _dsg, &txd->dsg_list, node) { + list_del(&dsg->node); + kfree(dsg); + } + + kfree(txd); +} + +static void s3c24xx_dma_start_next_sg(struct s3c24xx_dma_chan *s3cchan, + struct s3c24xx_txd *txd) +{ + struct s3c24xx_dma_engine *s3cdma = s3cchan->host; + struct s3c24xx_dma_phy *phy = s3cchan->phy; + const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata; + struct s3c24xx_sg *dsg = list_entry(txd->at, struct s3c24xx_sg, node); + u32 dcon = txd->dcon; + u32 val; + + /* transfer-size and -count from len and width */ + switch (txd->width) { + case 1: + dcon |= S3C24XX_DCON_DSZ_BYTE | dsg->len; + break; + case 2: + dcon |= S3C24XX_DCON_DSZ_HALFWORD | (dsg->len / 2); + break; + case 4: + dcon |= S3C24XX_DCON_DSZ_WORD | (dsg->len / 4); + break; + } + + if (s3cchan->slave) { + struct s3c24xx_dma_channel *cdata = + &pdata->channels[s3cchan->id]; + + if (s3cdma->sdata->has_reqsel) { + writel_relaxed((cdata->chansel << 1) | + S3C24XX_DMAREQSEL_HW, + phy->base + S3C24XX_DMAREQSEL); + } else { + int csel = cdata->chansel >> (phy->id * + S3C24XX_CHANSEL_WIDTH); + + csel &= S3C24XX_CHANSEL_REQ_MASK; + dcon |= csel << S3C24XX_DCON_HWSRC_SHIFT; + dcon |= S3C24XX_DCON_HWTRIG; + } + } else { + if (s3cdma->sdata->has_reqsel) + writel_relaxed(0, phy->base + S3C24XX_DMAREQSEL); + } + + writel_relaxed(dsg->src_addr, phy->base + S3C24XX_DISRC); + writel_relaxed(txd->disrcc, phy->base + S3C24XX_DISRCC); + writel_relaxed(dsg->dst_addr, phy->base + S3C24XX_DIDST); + writel_relaxed(txd->didstc, phy->base + S3C24XX_DIDSTC); + writel_relaxed(dcon, phy->base + S3C24XX_DCON); + + val = readl_relaxed(phy->base + S3C24XX_DMASKTRIG); + val &= ~S3C24XX_DMASKTRIG_STOP; + val |= S3C24XX_DMASKTRIG_ON; + + /* trigger the dma operation for memcpy transfers */ + if (!s3cchan->slave) + val |= S3C24XX_DMASKTRIG_SWTRIG; + + writel(val, phy->base + S3C24XX_DMASKTRIG); +} + +/* + * Set the initial DMA register values and start first sg. + */ +static void s3c24xx_dma_start_next_txd(struct s3c24xx_dma_chan *s3cchan) +{ + struct s3c24xx_dma_phy *phy = s3cchan->phy; + struct virt_dma_desc *vd = vchan_next_desc(&s3cchan->vc); + struct s3c24xx_txd *txd = to_s3c24xx_txd(&vd->tx); + + list_del(&txd->vd.node); + + s3cchan->at = txd; + + /* Wait for channel inactive */ + while (s3c24xx_dma_phy_busy(phy)) + cpu_relax(); + + /* point to the first element of the sg list */ + txd->at = txd->dsg_list.next; + s3c24xx_dma_start_next_sg(s3cchan, txd); +} + +static void s3c24xx_dma_free_txd_list(struct s3c24xx_dma_engine *s3cdma, + struct s3c24xx_dma_chan *s3cchan) +{ + LIST_HEAD(head); + + vchan_get_all_descriptors(&s3cchan->vc, &head); + vchan_dma_desc_free_list(&s3cchan->vc, &head); +} + +/* + * Try to allocate a physical channel. When successful, assign it to + * this virtual channel, and initiate the next descriptor. The + * virtual channel lock must be held at this point. + */ +static void s3c24xx_dma_phy_alloc_and_start(struct s3c24xx_dma_chan *s3cchan) +{ + struct s3c24xx_dma_engine *s3cdma = s3cchan->host; + struct s3c24xx_dma_phy *phy; + + phy = s3c24xx_dma_get_phy(s3cchan); + if (!phy) { + dev_dbg(&s3cdma->pdev->dev, "no physical channel available for xfer on %s\n", + s3cchan->name); + s3cchan->state = S3C24XX_DMA_CHAN_WAITING; + return; + } + + dev_dbg(&s3cdma->pdev->dev, "allocated physical channel %d for xfer on %s\n", + phy->id, s3cchan->name); + + s3cchan->phy = phy; + s3cchan->state = S3C24XX_DMA_CHAN_RUNNING; + + s3c24xx_dma_start_next_txd(s3cchan); +} + +static void s3c24xx_dma_phy_reassign_start(struct s3c24xx_dma_phy *phy, + struct s3c24xx_dma_chan *s3cchan) +{ + struct s3c24xx_dma_engine *s3cdma = s3cchan->host; + + dev_dbg(&s3cdma->pdev->dev, "reassigned physical channel %d for xfer on %s\n", + phy->id, s3cchan->name); + + /* + * We do this without taking the lock; we're really only concerned + * about whether this pointer is NULL or not, and we're guaranteed + * that this will only be called when it _already_ is non-NULL. + */ + phy->serving = s3cchan; + s3cchan->phy = phy; + s3cchan->state = S3C24XX_DMA_CHAN_RUNNING; + s3c24xx_dma_start_next_txd(s3cchan); +} + +/* + * Free a physical DMA channel, potentially reallocating it to another + * virtual channel if we have any pending. + */ +static void s3c24xx_dma_phy_free(struct s3c24xx_dma_chan *s3cchan) +{ + struct s3c24xx_dma_engine *s3cdma = s3cchan->host; + struct s3c24xx_dma_chan *p, *next; + +retry: + next = NULL; + + /* Find a waiting virtual channel for the next transfer. */ + list_for_each_entry(p, &s3cdma->memcpy.channels, vc.chan.device_node) + if (p->state == S3C24XX_DMA_CHAN_WAITING) { + next = p; + break; + } + + if (!next) { + list_for_each_entry(p, &s3cdma->slave.channels, + vc.chan.device_node) + if (p->state == S3C24XX_DMA_CHAN_WAITING && + s3c24xx_dma_phy_valid(p, s3cchan->phy)) { + next = p; + break; + } + } + + /* Ensure that the physical channel is stopped */ + s3c24xx_dma_terminate_phy(s3cchan->phy); + + if (next) { + bool success; + + /* + * Eww. We know this isn't going to deadlock + * but lockdep probably doesn't. + */ + spin_lock(&next->vc.lock); + /* Re-check the state now that we have the lock */ + success = next->state == S3C24XX_DMA_CHAN_WAITING; + if (success) + s3c24xx_dma_phy_reassign_start(s3cchan->phy, next); + spin_unlock(&next->vc.lock); + + /* If the state changed, try to find another channel */ + if (!success) + goto retry; + } else { + /* No more jobs, so free up the physical channel */ + s3c24xx_dma_put_phy(s3cchan->phy); + } + + s3cchan->phy = NULL; + s3cchan->state = S3C24XX_DMA_CHAN_IDLE; +} + +static void s3c24xx_dma_unmap_buffers(struct s3c24xx_txd *txd) +{ + struct device *dev = txd->vd.tx.chan->device->dev; + struct s3c24xx_sg *dsg; + + if (!(txd->vd.tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { + if (txd->vd.tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE) + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_single(dev, dsg->src_addr, dsg->len, + DMA_TO_DEVICE); + else { + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_page(dev, dsg->src_addr, dsg->len, + DMA_TO_DEVICE); + } + } + + if (!(txd->vd.tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { + if (txd->vd.tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE) + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_single(dev, dsg->dst_addr, dsg->len, + DMA_FROM_DEVICE); + else + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_page(dev, dsg->dst_addr, dsg->len, + DMA_FROM_DEVICE); + } +} + +static void s3c24xx_dma_desc_free(struct virt_dma_desc *vd) +{ + struct s3c24xx_txd *txd = to_s3c24xx_txd(&vd->tx); + struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(vd->tx.chan); + + if (!s3cchan->slave) + s3c24xx_dma_unmap_buffers(txd); + + s3c24xx_dma_free_txd(txd); +} + +static irqreturn_t s3c24xx_dma_irq(int irq, void *data) +{ + struct s3c24xx_dma_phy *phy = data; + struct s3c24xx_dma_chan *s3cchan = phy->serving; + struct s3c24xx_txd *txd; + + dev_dbg(&phy->host->pdev->dev, "interrupt on channel %d\n", phy->id); + + /* + * Interrupts happen to notify the completion of a transfer and the + * channel should have moved into its stop state already on its own. + * Therefore interrupts on channels not bound to a virtual channel + * should never happen. Nevertheless send a terminate command to the + * channel if the unlikely case happens. + */ + if (unlikely(!s3cchan)) { + dev_err(&phy->host->pdev->dev, "interrupt on unused channel %d\n", + phy->id); + + s3c24xx_dma_terminate_phy(phy); + + return IRQ_HANDLED; + } + + spin_lock(&s3cchan->vc.lock); + txd = s3cchan->at; + if (txd) { + /* when more sg's are in this txd, start the next one */ + if (!list_is_last(txd->at, &txd->dsg_list)) { + txd->at = txd->at->next; + s3c24xx_dma_start_next_sg(s3cchan, txd); + } else { + s3cchan->at = NULL; + vchan_cookie_complete(&txd->vd); + + /* + * And start the next descriptor (if any), + * otherwise free this channel. + */ + if (vchan_next_desc(&s3cchan->vc)) + s3c24xx_dma_start_next_txd(s3cchan); + else + s3c24xx_dma_phy_free(s3cchan); + } + } + spin_unlock(&s3cchan->vc.lock); + + return IRQ_HANDLED; +} + +/* + * The DMA ENGINE API + */ + +static int s3c24xx_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, + unsigned long arg) +{ + struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan); + struct s3c24xx_dma_engine *s3cdma = s3cchan->host; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&s3cchan->vc.lock, flags); + + switch (cmd) { + case DMA_SLAVE_CONFIG: + ret = s3c24xx_dma_set_runtime_config(s3cchan, + (struct dma_slave_config *)arg); + break; + case DMA_TERMINATE_ALL: + if (!s3cchan->phy && !s3cchan->at) { + dev_err(&s3cdma->pdev->dev, "trying to terminate already stopped channel %d\n", + s3cchan->id); + ret = -EINVAL; + break; + } + + s3cchan->state = S3C24XX_DMA_CHAN_IDLE; + + /* Mark physical channel as free */ + if (s3cchan->phy) + s3c24xx_dma_phy_free(s3cchan); + + /* Dequeue current job */ + if (s3cchan->at) { + s3c24xx_dma_desc_free(&s3cchan->at->vd); + s3cchan->at = NULL; + } + + /* Dequeue jobs not yet fired as well */ + s3c24xx_dma_free_txd_list(s3cdma, s3cchan); + break; + default: + /* Unknown command */ + ret = -ENXIO; + break; + } + + spin_unlock_irqrestore(&s3cchan->vc.lock, flags); + + return ret; +} + +static int s3c24xx_dma_alloc_chan_resources(struct dma_chan *chan) +{ + return 0; +} + +static void s3c24xx_dma_free_chan_resources(struct dma_chan *chan) +{ + /* Ensure all queued descriptors are freed */ + vchan_free_chan_resources(to_virt_chan(chan)); +} + +static enum dma_status s3c24xx_dma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, struct dma_tx_state *txstate) +{ + struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan); + struct s3c24xx_txd *txd; + struct s3c24xx_sg *dsg; + struct virt_dma_desc *vd; + unsigned long flags; + enum dma_status ret; + size_t bytes = 0; + + spin_lock_irqsave(&s3cchan->vc.lock, flags); + ret = dma_cookie_status(chan, cookie, txstate); + if (ret == DMA_SUCCESS) { + spin_unlock_irqrestore(&s3cchan->vc.lock, flags); + return ret; + } + + /* + * There's no point calculating the residue if there's + * no txstate to store the value. + */ + if (!txstate) { + spin_unlock_irqrestore(&s3cchan->vc.lock, flags); + return ret; + } + + vd = vchan_find_desc(&s3cchan->vc, cookie); + if (vd) { + /* On the issued list, so hasn't been processed yet */ + txd = to_s3c24xx_txd(&vd->tx); + + list_for_each_entry(dsg, &txd->dsg_list, node) + bytes += dsg->len; + } else { + /* + * Currently running, so sum over the pending sg's and + * the currently active one. + */ + txd = s3cchan->at; + + dsg = list_entry(txd->at, struct s3c24xx_sg, node); + list_for_each_entry_from(dsg, &txd->dsg_list, node) + bytes += dsg->len; + + bytes += s3c24xx_dma_getbytes_chan(s3cchan); + } + spin_unlock_irqrestore(&s3cchan->vc.lock, flags); + + /* + * This cookie not complete yet + * Get number of bytes left in the active transactions and queue + */ + dma_set_residue(txstate, bytes); + + /* Whether waiting or running, we're in progress */ + return ret; +} + +/* + * Initialize a descriptor to be used by memcpy submit + */ +static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy( + struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, + size_t len, unsigned long flags) +{ + struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan); + struct s3c24xx_dma_engine *s3cdma = s3cchan->host; + struct s3c24xx_txd *txd; + struct s3c24xx_sg *dsg; + int src_mod, dest_mod; + + dev_dbg(&s3cdma->pdev->dev, "prepare memcpy of %d bytes from %s\n", + len, s3cchan->name); + + if ((len & S3C24XX_DCON_TC_MASK) != len) { + dev_err(&s3cdma->pdev->dev, "memcpy size %d to large\n", len); + return NULL; + } + + txd = s3c24xx_dma_get_txd(); + if (!txd) + return NULL; + + dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT); + if (!dsg) { + s3c24xx_dma_free_txd(txd); + return NULL; + } + list_add_tail(&dsg->node, &txd->dsg_list); + + dsg->src_addr = src; + dsg->dst_addr = dest; + dsg->len = len; + + /* + * Determine a suitable transfer width. + * The DMA controller cannot fetch/store information which is not + * naturally aligned on the bus, i.e., a 4 byte fetch must start at + * an address divisible by 4 - more generally addr % width must be 0. + */ + src_mod = src % 4; + dest_mod = dest % 4; + switch (len % 4) { + case 0: + txd->width = (src_mod == 0 && dest_mod == 0) ? 4 : 1; + break; + case 2: + txd->width = ((src_mod == 2 || src_mod == 0) && + (dest_mod == 2 || dest_mod == 0)) ? 2 : 1; + break; + default: + txd->width = 1; + break; + } + + txd->disrcc = S3C24XX_DISRCC_LOC_AHB | S3C24XX_DISRCC_INC_INCREMENT; + txd->didstc = S3C24XX_DIDSTC_LOC_AHB | S3C24XX_DIDSTC_INC_INCREMENT; + txd->dcon |= S3C24XX_DCON_DEMAND | S3C24XX_DCON_SYNC_HCLK | + S3C24XX_DCON_SERV_WHOLE; + + return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags); +} + +static struct dma_async_tx_descriptor *s3c24xx_dma_prep_slave_sg( + struct dma_chan *chan, struct scatterlist *sgl, + unsigned int sg_len, enum dma_transfer_direction direction, + unsigned long flags, void *context) +{ + struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan); + struct s3c24xx_dma_engine *s3cdma = s3cchan->host; + const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata; + struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id]; + struct s3c24xx_txd *txd; + struct s3c24xx_sg *dsg; + struct scatterlist *sg; + dma_addr_t slave_addr; + u32 hwcfg = 0; + int tmp; + + dev_dbg(&s3cdma->pdev->dev, "prepare transaction of %d bytes from %s\n", + sg_dma_len(sgl), s3cchan->name); + + txd = s3c24xx_dma_get_txd(); + if (!txd) + return NULL; + + if (cdata->handshake) + txd->dcon |= S3C24XX_DCON_HANDSHAKE; + + switch (cdata->bus) { + case S3C24XX_DMA_APB: + txd->dcon |= S3C24XX_DCON_SYNC_PCLK; + hwcfg |= S3C24XX_DISRCC_LOC_APB; + break; + case S3C24XX_DMA_AHB: + txd->dcon |= S3C24XX_DCON_SYNC_HCLK; + hwcfg |= S3C24XX_DISRCC_LOC_AHB; + break; + } + + /* + * Always assume our peripheral desintation is a fixed + * address in memory. + */ + hwcfg |= S3C24XX_DISRCC_INC_FIXED; + + /* + * Individual dma operations are requested by the slave, + * so serve only single atomic operations (S3C24XX_DCON_SERV_SINGLE). + */ + txd->dcon |= S3C24XX_DCON_SERV_SINGLE; + + if (direction == DMA_MEM_TO_DEV) { + txd->disrcc = S3C24XX_DISRCC_LOC_AHB | + S3C24XX_DISRCC_INC_INCREMENT; + txd->didstc = hwcfg; + slave_addr = s3cchan->cfg.dst_addr; + txd->width = s3cchan->cfg.dst_addr_width; + } else if (direction == DMA_DEV_TO_MEM) { + txd->disrcc = hwcfg; + txd->didstc = S3C24XX_DIDSTC_LOC_AHB | + S3C24XX_DIDSTC_INC_INCREMENT; + slave_addr = s3cchan->cfg.src_addr; + txd->width = s3cchan->cfg.src_addr_width; + } else { + s3c24xx_dma_free_txd(txd); + dev_err(&s3cdma->pdev->dev, + "direction %d unsupported\n", direction); + return NULL; + } + + for_each_sg(sgl, sg, sg_len, tmp) { + dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT); + if (!dsg) { + s3c24xx_dma_free_txd(txd); + return NULL; + } + list_add_tail(&dsg->node, &txd->dsg_list); + + dsg->len = sg_dma_len(sg); + if (direction == DMA_MEM_TO_DEV) { + dsg->src_addr = sg_dma_address(sg); + dsg->dst_addr = slave_addr; + } else { /* DMA_DEV_TO_MEM */ + dsg->src_addr = slave_addr; + dsg->dst_addr = sg_dma_address(sg); + } + break; + } + + return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags); +} + +/* + * Slave transactions callback to the slave device to allow + * synchronization of slave DMA signals with the DMAC enable + */ +static void s3c24xx_dma_issue_pending(struct dma_chan *chan) +{ + struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan); + unsigned long flags; + + spin_lock_irqsave(&s3cchan->vc.lock, flags); + if (vchan_issue_pending(&s3cchan->vc)) { + if (!s3cchan->phy && s3cchan->state != S3C24XX_DMA_CHAN_WAITING) + s3c24xx_dma_phy_alloc_and_start(s3cchan); + } + spin_unlock_irqrestore(&s3cchan->vc.lock, flags); +} + +/* + * Bringup and teardown + */ + +/* + * Initialise the DMAC memcpy/slave channels. + * Make a local wrapper to hold required data + */ +static int s3c24xx_dma_init_virtual_channels(struct s3c24xx_dma_engine *s3cdma, + struct dma_device *dmadev, unsigned int channels, bool slave) +{ + struct s3c24xx_dma_chan *chan; + int i; + + INIT_LIST_HEAD(&dmadev->channels); + + /* + * Register as many many memcpy as we have physical channels, + * we won't always be able to use all but the code will have + * to cope with that situation. + */ + for (i = 0; i < channels; i++) { + chan = devm_kzalloc(dmadev->dev, sizeof(*chan), GFP_KERNEL); + if (!chan) { + dev_err(dmadev->dev, + "%s no memory for channel\n", __func__); + return -ENOMEM; + } + + chan->id = i; + chan->host = s3cdma; + chan->state = S3C24XX_DMA_CHAN_IDLE; + + if (slave) { + chan->slave = true; + chan->name = kasprintf(GFP_KERNEL, "slave%d", i); + if (!chan->name) + return -ENOMEM; + } else { + chan->name = kasprintf(GFP_KERNEL, "memcpy%d", i); + if (!chan->name) + return -ENOMEM; + } + dev_dbg(dmadev->dev, + "initialize virtual channel \"%s\"\n", + chan->name); + + chan->vc.desc_free = s3c24xx_dma_desc_free; + vchan_init(&chan->vc, dmadev); + } + dev_info(dmadev->dev, "initialized %d virtual %s channels\n", + i, slave ? "slave" : "memcpy"); + return i; +} + +static void s3c24xx_dma_free_virtual_channels(struct dma_device *dmadev) +{ + struct s3c24xx_dma_chan *chan = NULL; + struct s3c24xx_dma_chan *next; + + list_for_each_entry_safe(chan, + next, &dmadev->channels, vc.chan.device_node) + list_del(&chan->vc.chan.device_node); +} + +/* s3c2410, s3c2440 and s3c2442 have a 0x40 stride without separate clocks */ +static struct soc_data soc_s3c2410 = { + .stride = 0x40, + .has_reqsel = false, + .has_clocks = false, +}; + +/* s3c2412 and s3c2413 have a 0x40 stride and dmareqsel mechanism */ +static struct soc_data soc_s3c2412 = { + .stride = 0x40, + .has_reqsel = true, + .has_clocks = true, +}; + +/* s3c2443 and following have a 0x100 stride and dmareqsel mechanism */ +static struct soc_data soc_s3c2443 = { + .stride = 0x100, + .has_reqsel = true, + .has_clocks = true, +}; + +static struct platform_device_id s3c24xx_dma_driver_ids[] = { + { + .name = "s3c2410-dma", + .driver_data = (kernel_ulong_t)&soc_s3c2410, + }, { + .name = "s3c2412-dma", + .driver_data = (kernel_ulong_t)&soc_s3c2412, + }, { + .name = "s3c2443-dma", + .driver_data = (kernel_ulong_t)&soc_s3c2443, + }, + { }, +}; + +static struct soc_data *s3c24xx_dma_get_soc_data(struct platform_device *pdev) +{ + return (struct soc_data *) + platform_get_device_id(pdev)->driver_data; +} + +static int s3c24xx_dma_probe(struct platform_device *pdev) +{ + const struct s3c24xx_dma_platdata *pdata = dev_get_platdata(&pdev->dev); + struct s3c24xx_dma_engine *s3cdma; + struct soc_data *sdata; + struct resource *res; + int ret; + int i; + + if (!pdata) { + dev_err(&pdev->dev, "platform data missing\n"); + return -ENODEV; + } + + /* Basic sanity check */ + if (pdata->num_phy_channels > MAX_DMA_CHANNELS) { + dev_err(&pdev->dev, "to many dma channels %d, max %d\n", + pdata->num_phy_channels, MAX_DMA_CHANNELS); + return -EINVAL; + } + + sdata = s3c24xx_dma_get_soc_data(pdev); + if (!sdata) + return -EINVAL; + + s3cdma = devm_kzalloc(&pdev->dev, sizeof(*s3cdma), GFP_KERNEL); + if (!s3cdma) + return -ENOMEM; + + s3cdma->pdev = pdev; + s3cdma->pdata = pdata; + s3cdma->sdata = sdata; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + s3cdma->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(s3cdma->base)) + return PTR_ERR(s3cdma->base); + + s3cdma->phy_chans = devm_kzalloc(&pdev->dev, + sizeof(struct s3c24xx_dma_phy) * + pdata->num_phy_channels, + GFP_KERNEL); + if (!s3cdma->phy_chans) + return -ENOMEM; + + /* aquire irqs and clocks for all physical channels */ + for (i = 0; i < pdata->num_phy_channels; i++) { + struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i]; + char clk_name[6]; + + phy->id = i; + phy->base = s3cdma->base + (i * sdata->stride); + phy->host = s3cdma; + + phy->irq = platform_get_irq(pdev, i); + if (phy->irq < 0) { + dev_err(&pdev->dev, "failed to get irq %d, err %d\n", + i, phy->irq); + continue; + } + + ret = devm_request_irq(&pdev->dev, phy->irq, s3c24xx_dma_irq, + 0, pdev->name, phy); + if (ret) { + dev_err(&pdev->dev, "Unable to request irq for channel %d, error %d\n", + i, ret); + continue; + } + + if (sdata->has_clocks) { + sprintf(clk_name, "dma.%d", i); + phy->clk = devm_clk_get(&pdev->dev, clk_name); + if (IS_ERR(phy->clk) && sdata->has_clocks) { + dev_err(&pdev->dev, "unable to aquire clock for channel %d, error %lu", + i, PTR_ERR(phy->clk)); + continue; + } + + ret = clk_prepare(phy->clk); + if (ret) { + dev_err(&pdev->dev, "clock for phy %d failed, error %d\n", + i, ret); + continue; + } + } + + spin_lock_init(&phy->lock); + phy->valid = true; + + dev_dbg(&pdev->dev, "physical channel %d is %s\n", + i, s3c24xx_dma_phy_busy(phy) ? "BUSY" : "FREE"); + } + + /* Initialize memcpy engine */ + dma_cap_set(DMA_MEMCPY, s3cdma->memcpy.cap_mask); + dma_cap_set(DMA_PRIVATE, s3cdma->memcpy.cap_mask); + s3cdma->memcpy.dev = &pdev->dev; + s3cdma->memcpy.device_alloc_chan_resources = + s3c24xx_dma_alloc_chan_resources; + s3cdma->memcpy.device_free_chan_resources = + s3c24xx_dma_free_chan_resources; + s3cdma->memcpy.device_prep_dma_memcpy = s3c24xx_dma_prep_memcpy; + s3cdma->memcpy.device_tx_status = s3c24xx_dma_tx_status; + s3cdma->memcpy.device_issue_pending = s3c24xx_dma_issue_pending; + s3cdma->memcpy.device_control = s3c24xx_dma_control; + + /* Initialize slave engine for SoC internal dedicated peripherals */ + dma_cap_set(DMA_SLAVE, s3cdma->slave.cap_mask); + dma_cap_set(DMA_PRIVATE, s3cdma->slave.cap_mask); + s3cdma->slave.dev = &pdev->dev; + s3cdma->slave.device_alloc_chan_resources = + s3c24xx_dma_alloc_chan_resources; + s3cdma->slave.device_free_chan_resources = + s3c24xx_dma_free_chan_resources; + s3cdma->slave.device_tx_status = s3c24xx_dma_tx_status; + s3cdma->slave.device_issue_pending = s3c24xx_dma_issue_pending; + s3cdma->slave.device_prep_slave_sg = s3c24xx_dma_prep_slave_sg; + s3cdma->slave.device_control = s3c24xx_dma_control; + + /* Register as many memcpy channels as there are physical channels */ + ret = s3c24xx_dma_init_virtual_channels(s3cdma, &s3cdma->memcpy, + pdata->num_phy_channels, false); + if (ret <= 0) { + dev_warn(&pdev->dev, + "%s failed to enumerate memcpy channels - %d\n", + __func__, ret); + goto err_memcpy; + } + + /* Register slave channels */ + ret = s3c24xx_dma_init_virtual_channels(s3cdma, &s3cdma->slave, + pdata->num_channels, true); + if (ret <= 0) { + dev_warn(&pdev->dev, + "%s failed to enumerate slave channels - %d\n", + __func__, ret); + goto err_slave; + } + + ret = dma_async_device_register(&s3cdma->memcpy); + if (ret) { + dev_warn(&pdev->dev, + "%s failed to register memcpy as an async device - %d\n", + __func__, ret); + goto err_memcpy_reg; + } + + ret = dma_async_device_register(&s3cdma->slave); + if (ret) { + dev_warn(&pdev->dev, + "%s failed to register slave as an async device - %d\n", + __func__, ret); + goto err_slave_reg; + } + + platform_set_drvdata(pdev, s3cdma); + dev_info(&pdev->dev, "Loaded dma driver with %d physical channels\n", + pdata->num_phy_channels); + + return 0; + +err_slave_reg: + dma_async_device_unregister(&s3cdma->memcpy); +err_memcpy_reg: + s3c24xx_dma_free_virtual_channels(&s3cdma->slave); +err_slave: + s3c24xx_dma_free_virtual_channels(&s3cdma->memcpy); +err_memcpy: + if (sdata->has_clocks) + for (i = 0; i < pdata->num_phy_channels; i++) { + struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i]; + if (phy->valid) + clk_unprepare(phy->clk); + } + + return ret; +} + +static int s3c24xx_dma_remove(struct platform_device *pdev) +{ + const struct s3c24xx_dma_platdata *pdata = dev_get_platdata(&pdev->dev); + struct s3c24xx_dma_engine *s3cdma = platform_get_drvdata(pdev); + struct soc_data *sdata = s3c24xx_dma_get_soc_data(pdev); + int i; + + dma_async_device_unregister(&s3cdma->slave); + dma_async_device_unregister(&s3cdma->memcpy); + + s3c24xx_dma_free_virtual_channels(&s3cdma->slave); + s3c24xx_dma_free_virtual_channels(&s3cdma->memcpy); + + if (sdata->has_clocks) + for (i = 0; i < pdata->num_phy_channels; i++) { + struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i]; + if (phy->valid) + clk_unprepare(phy->clk); + } + + return 0; +} + +static struct platform_driver s3c24xx_dma_driver = { + .driver = { + .name = "s3c24xx-dma", + .owner = THIS_MODULE, + }, + .id_table = s3c24xx_dma_driver_ids, + .probe = s3c24xx_dma_probe, + .remove = s3c24xx_dma_remove, +}; + +module_platform_driver(s3c24xx_dma_driver); + +bool s3c24xx_dma_filter(struct dma_chan *chan, void *param) +{ + struct s3c24xx_dma_chan *s3cchan; + + if (chan->device->dev->driver != &s3c24xx_dma_driver.driver) + return false; + + s3cchan = to_s3c24xx_dma_chan(chan); + + return s3cchan->id == (int)param; +} +EXPORT_SYMBOL(s3c24xx_dma_filter); + +MODULE_DESCRIPTION("S3C24XX DMA Driver"); +MODULE_AUTHOR("Heiko Stuebner"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c index 17df6db5dca7df56729af877b561d99f8892a15e..8847adf392b7ecf823f9f603314c76001367203f 100644 --- a/drivers/gpio/gpio-davinci.c +++ b/drivers/gpio/gpio-davinci.c @@ -15,8 +15,9 @@ #include #include #include - -#include +#include +#include +#include struct davinci_gpio_regs { u32 dir; @@ -31,13 +32,14 @@ struct davinci_gpio_regs { u32 intstat; }; +#define BINTEN 0x8 /* GPIO Interrupt Per-Bank Enable Register */ + #define chip2controller(chip) \ container_of(chip, struct davinci_gpio_controller, chip) -static struct davinci_gpio_controller chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)]; static void __iomem *gpio_base; -static struct davinci_gpio_regs __iomem __init *gpio2regs(unsigned gpio) +static struct davinci_gpio_regs __iomem *gpio2regs(unsigned gpio) { void __iomem *ptr; @@ -65,7 +67,7 @@ static inline struct davinci_gpio_regs __iomem *irq2regs(int irq) return g; } -static int __init davinci_gpio_irq_setup(void); +static int davinci_gpio_irq_setup(struct platform_device *pdev); /*--------------------------------------------------------------------------*/ @@ -131,33 +133,53 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) __raw_writel((1 << offset), value ? &g->set_data : &g->clr_data); } -static int __init davinci_gpio_setup(void) +static int davinci_gpio_probe(struct platform_device *pdev) { int i, base; unsigned ngpio; - struct davinci_soc_info *soc_info = &davinci_soc_info; - struct davinci_gpio_regs *regs; - - if (soc_info->gpio_type != GPIO_TYPE_DAVINCI) - return 0; + struct davinci_gpio_controller *chips; + struct davinci_gpio_platform_data *pdata; + struct davinci_gpio_regs __iomem *regs; + struct device *dev = &pdev->dev; + struct resource *res; + + pdata = dev->platform_data; + if (!pdata) { + dev_err(dev, "No platform data found\n"); + return -EINVAL; + } /* * The gpio banks conceptually expose a segmented bitmap, * and "ngpio" is one more than the largest zero-based * bit index that's valid. */ - ngpio = soc_info->gpio_num; + ngpio = pdata->ngpio; if (ngpio == 0) { - pr_err("GPIO setup: how many GPIOs?\n"); + dev_err(dev, "How many GPIOs?\n"); return -EINVAL; } if (WARN_ON(DAVINCI_N_GPIO < ngpio)) ngpio = DAVINCI_N_GPIO; - gpio_base = ioremap(soc_info->gpio_base, SZ_4K); - if (WARN_ON(!gpio_base)) + chips = devm_kzalloc(dev, + ngpio * sizeof(struct davinci_gpio_controller), + GFP_KERNEL); + if (!chips) { + dev_err(dev, "Memory allocation failed\n"); return -ENOMEM; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "Invalid memory resource\n"); + return -EBUSY; + } + + gpio_base = devm_ioremap_resource(dev, res); + if (IS_ERR(gpio_base)) + return PTR_ERR(gpio_base); for (i = 0, base = 0; base < ngpio; i++, base += 32) { chips[i].chip.label = "DaVinci"; @@ -183,13 +205,10 @@ static int __init davinci_gpio_setup(void) gpiochip_add(&chips[i].chip); } - soc_info->gpio_ctlrs = chips; - soc_info->gpio_ctlrs_num = DIV_ROUND_UP(ngpio, 32); - - davinci_gpio_irq_setup(); + platform_set_drvdata(pdev, chips); + davinci_gpio_irq_setup(pdev); return 0; } -pure_initcall(davinci_gpio_setup); /*--------------------------------------------------------------------------*/ /* @@ -302,13 +321,14 @@ static int gpio_to_irq_banked(struct gpio_chip *chip, unsigned offset) static int gpio_to_irq_unbanked(struct gpio_chip *chip, unsigned offset) { - struct davinci_soc_info *soc_info = &davinci_soc_info; + struct davinci_gpio_controller *d = chip2controller(chip); - /* NOTE: we assume for now that only irqs in the first gpio_chip + /* + * NOTE: we assume for now that only irqs in the first gpio_chip * can provide direct-mapped IRQs to AINTC (up to 32 GPIOs). */ - if (offset < soc_info->gpio_unbanked) - return soc_info->gpio_irq + offset; + if (offset < d->irq_base) + return d->gpio_irq + offset; else return -ENODEV; } @@ -317,12 +337,11 @@ static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger) { struct davinci_gpio_controller *d; struct davinci_gpio_regs __iomem *g; - struct davinci_soc_info *soc_info = &davinci_soc_info; u32 mask; d = (struct davinci_gpio_controller *)data->handler_data; g = (struct davinci_gpio_regs __iomem *)d->regs; - mask = __gpio_mask(data->irq - soc_info->gpio_irq); + mask = __gpio_mask(data->irq - d->gpio_irq); if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) return -EINVAL; @@ -343,24 +362,33 @@ static int gpio_irq_type_unbanked(struct irq_data *data, unsigned trigger) * (dm6446) can be set appropriately for GPIOV33 pins. */ -static int __init davinci_gpio_irq_setup(void) +static int davinci_gpio_irq_setup(struct platform_device *pdev) { unsigned gpio, irq, bank; struct clk *clk; u32 binten = 0; unsigned ngpio, bank_irq; - struct davinci_soc_info *soc_info = &davinci_soc_info; - struct davinci_gpio_regs __iomem *g; + struct device *dev = &pdev->dev; + struct resource *res; + struct davinci_gpio_controller *chips = platform_get_drvdata(pdev); + struct davinci_gpio_platform_data *pdata = dev->platform_data; + struct davinci_gpio_regs __iomem *g; - ngpio = soc_info->gpio_num; + ngpio = pdata->ngpio; + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res) { + dev_err(dev, "Invalid IRQ resource\n"); + return -EBUSY; + } - bank_irq = soc_info->gpio_irq; - if (bank_irq == 0) { - printk(KERN_ERR "Don't know first GPIO bank IRQ.\n"); - return -EINVAL; + bank_irq = res->start; + + if (!bank_irq) { + dev_err(dev, "Invalid IRQ resource\n"); + return -ENODEV; } - clk = clk_get(NULL, "gpio"); + clk = devm_clk_get(dev, "gpio"); if (IS_ERR(clk)) { printk(KERN_ERR "Error %ld getting gpio clock?\n", PTR_ERR(clk)); @@ -368,16 +396,17 @@ static int __init davinci_gpio_irq_setup(void) } clk_prepare_enable(clk); - /* Arrange gpio_to_irq() support, handling either direct IRQs or + /* + * Arrange gpio_to_irq() support, handling either direct IRQs or * banked IRQs. Having GPIOs in the first GPIO bank use direct * IRQs, while the others use banked IRQs, would need some setup * tweaks to recognize hardware which can do that. */ for (gpio = 0, bank = 0; gpio < ngpio; bank++, gpio += 32) { chips[bank].chip.to_irq = gpio_to_irq_banked; - chips[bank].irq_base = soc_info->gpio_unbanked + chips[bank].irq_base = pdata->gpio_unbanked ? -EINVAL - : (soc_info->intc_irq_num + gpio); + : (pdata->intc_irq_num + gpio); } /* @@ -385,7 +414,7 @@ static int __init davinci_gpio_irq_setup(void) * controller only handling trigger modes. We currently assume no * IRQ mux conflicts; gpio_irq_type_unbanked() is only for GPIOs. */ - if (soc_info->gpio_unbanked) { + if (pdata->gpio_unbanked) { static struct irq_chip_type gpio_unbanked; /* pass "bank 0" GPIO IRQs to AINTC */ @@ -405,7 +434,7 @@ static int __init davinci_gpio_irq_setup(void) __raw_writel(~0, &g->set_rising); /* set the direct IRQs up to use that irqchip */ - for (gpio = 0; gpio < soc_info->gpio_unbanked; gpio++, irq++) { + for (gpio = 0; gpio < pdata->gpio_unbanked; gpio++, irq++) { irq_set_chip(irq, &gpio_unbanked.chip); irq_set_handler_data(irq, &chips[gpio / 32]); irq_set_status_flags(irq, IRQ_TYPE_EDGE_BOTH); @@ -450,12 +479,31 @@ static int __init davinci_gpio_irq_setup(void) } done: - /* BINTEN -- per-bank interrupt enable. genirq would also let these + /* + * BINTEN -- per-bank interrupt enable. genirq would also let these * bits be set/cleared dynamically. */ - __raw_writel(binten, gpio_base + 0x08); + __raw_writel(binten, gpio_base + BINTEN); printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0)); return 0; } + +static struct platform_driver davinci_gpio_driver = { + .probe = davinci_gpio_probe, + .driver = { + .name = "davinci_gpio", + .owner = THIS_MODULE, + }, +}; + +/** + * GPIO driver registration needs to be done before machine_init functions + * access GPIO. Hence davinci_gpio_drv_reg() is a postcore_initcall. + */ +static int __init davinci_gpio_drv_reg(void) +{ + return platform_driver_register(&davinci_gpio_driver); +} +postcore_initcall(davinci_gpio_drv_reg); diff --git a/drivers/gpio/gpio-tnetv107x.c b/drivers/gpio/gpio-tnetv107x.c index 3fa3e2867e19b8dfcbd3ca2275b0fbd194cb0693..58445bb69106c71ab648263e731e12151e48c911 100644 --- a/drivers/gpio/gpio-tnetv107x.c +++ b/drivers/gpio/gpio-tnetv107x.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c index bb328a366122851b0d28308e13079dfb3ad146d2..433cc8568dec803c78957d12e9bb9b15d7e4ff00 100644 --- a/drivers/irqchip/irq-armada-370-xp.c +++ b/drivers/irqchip/irq-armada-370-xp.c @@ -21,7 +21,10 @@ #include #include #include +#include #include +#include +#include #include #include #include @@ -51,12 +54,22 @@ #define IPI_DOORBELL_START (0) #define IPI_DOORBELL_END (8) #define IPI_DOORBELL_MASK 0xFF +#define PCI_MSI_DOORBELL_START (16) +#define PCI_MSI_DOORBELL_NR (16) +#define PCI_MSI_DOORBELL_END (32) +#define PCI_MSI_DOORBELL_MASK 0xFFFF0000 static DEFINE_RAW_SPINLOCK(irq_controller_lock); static void __iomem *per_cpu_int_base; static void __iomem *main_int_base; static struct irq_domain *armada_370_xp_mpic_domain; +#ifdef CONFIG_PCI_MSI +static struct irq_domain *armada_370_xp_msi_domain; +static DECLARE_BITMAP(msi_used, PCI_MSI_DOORBELL_NR); +static DEFINE_MUTEX(msi_used_lock); +static phys_addr_t msi_doorbell_addr; +#endif /* * In SMP mode: @@ -87,6 +100,144 @@ static void armada_370_xp_irq_unmask(struct irq_data *d) ARMADA_370_XP_INT_CLEAR_MASK_OFFS); } +#ifdef CONFIG_PCI_MSI + +static int armada_370_xp_alloc_msi(void) +{ + int hwirq; + + mutex_lock(&msi_used_lock); + hwirq = find_first_zero_bit(&msi_used, PCI_MSI_DOORBELL_NR); + if (hwirq >= PCI_MSI_DOORBELL_NR) + hwirq = -ENOSPC; + else + set_bit(hwirq, msi_used); + mutex_unlock(&msi_used_lock); + + return hwirq; +} + +static void armada_370_xp_free_msi(int hwirq) +{ + mutex_lock(&msi_used_lock); + if (!test_bit(hwirq, msi_used)) + pr_err("trying to free unused MSI#%d\n", hwirq); + else + clear_bit(hwirq, msi_used); + mutex_unlock(&msi_used_lock); +} + +static int armada_370_xp_setup_msi_irq(struct msi_chip *chip, + struct pci_dev *pdev, + struct msi_desc *desc) +{ + struct msi_msg msg; + irq_hw_number_t hwirq; + int virq; + + hwirq = armada_370_xp_alloc_msi(); + if (hwirq < 0) + return hwirq; + + virq = irq_create_mapping(armada_370_xp_msi_domain, hwirq); + if (!virq) { + armada_370_xp_free_msi(hwirq); + return -EINVAL; + } + + irq_set_msi_desc(virq, desc); + + msg.address_lo = msi_doorbell_addr; + msg.address_hi = 0; + msg.data = 0xf00 | (hwirq + 16); + + write_msi_msg(virq, &msg); + return 0; +} + +static void armada_370_xp_teardown_msi_irq(struct msi_chip *chip, + unsigned int irq) +{ + struct irq_data *d = irq_get_irq_data(irq); + irq_dispose_mapping(irq); + armada_370_xp_free_msi(d->hwirq); +} + +static struct irq_chip armada_370_xp_msi_irq_chip = { + .name = "armada_370_xp_msi_irq", + .irq_enable = unmask_msi_irq, + .irq_disable = mask_msi_irq, + .irq_mask = mask_msi_irq, + .irq_unmask = unmask_msi_irq, +}; + +static int armada_370_xp_msi_map(struct irq_domain *domain, unsigned int virq, + irq_hw_number_t hw) +{ + irq_set_chip_and_handler(virq, &armada_370_xp_msi_irq_chip, + handle_simple_irq); + set_irq_flags(virq, IRQF_VALID); + + return 0; +} + +static const struct irq_domain_ops armada_370_xp_msi_irq_ops = { + .map = armada_370_xp_msi_map, +}; + +static int armada_370_xp_msi_init(struct device_node *node, + phys_addr_t main_int_phys_base) +{ + struct msi_chip *msi_chip; + u32 reg; + int ret; + + msi_doorbell_addr = main_int_phys_base + + ARMADA_370_XP_SW_TRIG_INT_OFFS; + + msi_chip = kzalloc(sizeof(*msi_chip), GFP_KERNEL); + if (!msi_chip) + return -ENOMEM; + + msi_chip->setup_irq = armada_370_xp_setup_msi_irq; + msi_chip->teardown_irq = armada_370_xp_teardown_msi_irq; + msi_chip->of_node = node; + + armada_370_xp_msi_domain = + irq_domain_add_linear(NULL, PCI_MSI_DOORBELL_NR, + &armada_370_xp_msi_irq_ops, + NULL); + if (!armada_370_xp_msi_domain) { + kfree(msi_chip); + return -ENOMEM; + } + + ret = of_pci_msi_chip_add(msi_chip); + if (ret < 0) { + irq_domain_remove(armada_370_xp_msi_domain); + kfree(msi_chip); + return ret; + } + + reg = readl(per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_MSK_OFFS) + | PCI_MSI_DOORBELL_MASK; + + writel(reg, per_cpu_int_base + + ARMADA_370_XP_IN_DRBEL_MSK_OFFS); + + /* Unmask IPI interrupt */ + writel(1, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS); + + return 0; +} +#else +static inline int armada_370_xp_msi_init(struct device_node *node, + phys_addr_t main_int_phys_base) +{ + return 0; +} +#endif + #ifdef CONFIG_SMP static int armada_xp_set_affinity(struct irq_data *d, const struct cpumask *mask_val, bool force) @@ -214,12 +365,39 @@ armada_370_xp_handle_irq(struct pt_regs *regs) if (irqnr > 1022) break; - if (irqnr > 0) { + if (irqnr > 1) { irqnr = irq_find_mapping(armada_370_xp_mpic_domain, irqnr); handle_IRQ(irqnr, regs); continue; } + +#ifdef CONFIG_PCI_MSI + /* MSI handling */ + if (irqnr == 1) { + u32 msimask, msinr; + + msimask = readl_relaxed(per_cpu_int_base + + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS) + & PCI_MSI_DOORBELL_MASK; + + writel(~PCI_MSI_DOORBELL_MASK, per_cpu_int_base + + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS); + + for (msinr = PCI_MSI_DOORBELL_START; + msinr < PCI_MSI_DOORBELL_END; msinr++) { + int irq; + + if (!(msimask & BIT(msinr))) + continue; + + irq = irq_find_mapping(armada_370_xp_msi_domain, + msinr - 16); + handle_IRQ(irq, regs); + } + } +#endif + #ifdef CONFIG_SMP /* IPI Handling */ if (irqnr == 0) { @@ -248,12 +426,25 @@ armada_370_xp_handle_irq(struct pt_regs *regs) static int __init armada_370_xp_mpic_of_init(struct device_node *node, struct device_node *parent) { + struct resource main_int_res, per_cpu_int_res; u32 control; - main_int_base = of_iomap(node, 0); - per_cpu_int_base = of_iomap(node, 1); + BUG_ON(of_address_to_resource(node, 0, &main_int_res)); + BUG_ON(of_address_to_resource(node, 1, &per_cpu_int_res)); + + BUG_ON(!request_mem_region(main_int_res.start, + resource_size(&main_int_res), + node->full_name)); + BUG_ON(!request_mem_region(per_cpu_int_res.start, + resource_size(&per_cpu_int_res), + node->full_name)); + main_int_base = ioremap(main_int_res.start, + resource_size(&main_int_res)); BUG_ON(!main_int_base); + + per_cpu_int_base = ioremap(per_cpu_int_res.start, + resource_size(&per_cpu_int_res)); BUG_ON(!per_cpu_int_base); control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL); @@ -262,8 +453,7 @@ static int __init armada_370_xp_mpic_of_init(struct device_node *node, irq_domain_add_linear(node, (control >> 2) & 0x3ff, &armada_370_xp_mpic_irq_ops, NULL); - if (!armada_370_xp_mpic_domain) - panic("Unable to add Armada_370_Xp MPIC irq domain (DT)\n"); + BUG_ON(!armada_370_xp_mpic_domain); irq_set_default_host(armada_370_xp_mpic_domain); @@ -280,6 +470,8 @@ static int __init armada_370_xp_mpic_of_init(struct device_node *node, #endif + armada_370_xp_msi_init(node, main_int_res.start); + set_handle_irq(armada_370_xp_handle_irq); return 0; diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 3d950481112634fc847d61fef187efc86503a189..43186feb4294598b570727e5382263fbffbb1d0d 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -3,7 +3,7 @@ menu "PCI host controller drivers" config PCI_MVEBU bool "Marvell EBU PCIe controller" - depends on ARCH_MVEBU || ARCH_KIRKWOOD + depends on ARCH_MVEBU || ARCH_DOVE || ARCH_KIRKWOOD depends on OF config PCIE_DW diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c index 729d5a101d621ece6d36b425ad213a48a57a859f..80b2250ea19a6f892e3645e8736216c7dd96aafd 100644 --- a/drivers/pci/host/pci-mvebu.c +++ b/drivers/pci/host/pci-mvebu.c @@ -9,13 +9,17 @@ #include #include #include +#include +#include #include #include +#include #include #include #include -#include #include +#include +#include #include /* @@ -103,6 +107,7 @@ struct mvebu_pcie_port; struct mvebu_pcie { struct platform_device *pdev; struct mvebu_pcie_port *ports; + struct msi_chip *msi; struct resource io; struct resource realio; struct resource mem; @@ -115,7 +120,6 @@ struct mvebu_pcie_port { char *name; void __iomem *base; spinlock_t conf_lock; - int haslink; u32 port; u32 lane; int devfn; @@ -124,6 +128,9 @@ struct mvebu_pcie_port { unsigned int io_target; unsigned int io_attr; struct clk *clk; + int reset_gpio; + int reset_active_low; + char *reset_name; struct mvebu_sw_pci_bridge bridge; struct device_node *dn; struct mvebu_pcie *pcie; @@ -133,29 +140,39 @@ struct mvebu_pcie_port { size_t iowin_size; }; +static inline void mvebu_writel(struct mvebu_pcie_port *port, u32 val, u32 reg) +{ + writel(val, port->base + reg); +} + +static inline u32 mvebu_readl(struct mvebu_pcie_port *port, u32 reg) +{ + return readl(port->base + reg); +} + static bool mvebu_pcie_link_up(struct mvebu_pcie_port *port) { - return !(readl(port->base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN); + return !(mvebu_readl(port, PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN); } static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie_port *port, int nr) { u32 stat; - stat = readl(port->base + PCIE_STAT_OFF); + stat = mvebu_readl(port, PCIE_STAT_OFF); stat &= ~PCIE_STAT_BUS; stat |= nr << 8; - writel(stat, port->base + PCIE_STAT_OFF); + mvebu_writel(port, stat, PCIE_STAT_OFF); } static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr) { u32 stat; - stat = readl(port->base + PCIE_STAT_OFF); + stat = mvebu_readl(port, PCIE_STAT_OFF); stat &= ~PCIE_STAT_DEV; stat |= nr << 16; - writel(stat, port->base + PCIE_STAT_OFF); + mvebu_writel(port, stat, PCIE_STAT_OFF); } /* @@ -163,7 +180,7 @@ static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie_port *port, int nr) * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks * WIN[0-3] -> DRAM bank[0-3] */ -static void __init mvebu_pcie_setup_wins(struct mvebu_pcie_port *port) +static void mvebu_pcie_setup_wins(struct mvebu_pcie_port *port) { const struct mbus_dram_target_info *dram; u32 size; @@ -173,33 +190,34 @@ static void __init mvebu_pcie_setup_wins(struct mvebu_pcie_port *port) /* First, disable and clear BARs and windows. */ for (i = 1; i < 3; i++) { - writel(0, port->base + PCIE_BAR_CTRL_OFF(i)); - writel(0, port->base + PCIE_BAR_LO_OFF(i)); - writel(0, port->base + PCIE_BAR_HI_OFF(i)); + mvebu_writel(port, 0, PCIE_BAR_CTRL_OFF(i)); + mvebu_writel(port, 0, PCIE_BAR_LO_OFF(i)); + mvebu_writel(port, 0, PCIE_BAR_HI_OFF(i)); } for (i = 0; i < 5; i++) { - writel(0, port->base + PCIE_WIN04_CTRL_OFF(i)); - writel(0, port->base + PCIE_WIN04_BASE_OFF(i)); - writel(0, port->base + PCIE_WIN04_REMAP_OFF(i)); + mvebu_writel(port, 0, PCIE_WIN04_CTRL_OFF(i)); + mvebu_writel(port, 0, PCIE_WIN04_BASE_OFF(i)); + mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i)); } - writel(0, port->base + PCIE_WIN5_CTRL_OFF); - writel(0, port->base + PCIE_WIN5_BASE_OFF); - writel(0, port->base + PCIE_WIN5_REMAP_OFF); + mvebu_writel(port, 0, PCIE_WIN5_CTRL_OFF); + mvebu_writel(port, 0, PCIE_WIN5_BASE_OFF); + mvebu_writel(port, 0, PCIE_WIN5_REMAP_OFF); /* Setup windows for DDR banks. Count total DDR size on the fly. */ size = 0; for (i = 0; i < dram->num_cs; i++) { const struct mbus_dram_window *cs = dram->cs + i; - writel(cs->base & 0xffff0000, - port->base + PCIE_WIN04_BASE_OFF(i)); - writel(0, port->base + PCIE_WIN04_REMAP_OFF(i)); - writel(((cs->size - 1) & 0xffff0000) | - (cs->mbus_attr << 8) | - (dram->mbus_dram_target_id << 4) | 1, - port->base + PCIE_WIN04_CTRL_OFF(i)); + mvebu_writel(port, cs->base & 0xffff0000, + PCIE_WIN04_BASE_OFF(i)); + mvebu_writel(port, 0, PCIE_WIN04_REMAP_OFF(i)); + mvebu_writel(port, + ((cs->size - 1) & 0xffff0000) | + (cs->mbus_attr << 8) | + (dram->mbus_dram_target_id << 4) | 1, + PCIE_WIN04_CTRL_OFF(i)); size += cs->size; } @@ -209,41 +227,40 @@ static void __init mvebu_pcie_setup_wins(struct mvebu_pcie_port *port) size = 1 << fls(size); /* Setup BAR[1] to all DRAM banks. */ - writel(dram->cs[0].base, port->base + PCIE_BAR_LO_OFF(1)); - writel(0, port->base + PCIE_BAR_HI_OFF(1)); - writel(((size - 1) & 0xffff0000) | 1, - port->base + PCIE_BAR_CTRL_OFF(1)); + mvebu_writel(port, dram->cs[0].base, PCIE_BAR_LO_OFF(1)); + mvebu_writel(port, 0, PCIE_BAR_HI_OFF(1)); + mvebu_writel(port, ((size - 1) & 0xffff0000) | 1, + PCIE_BAR_CTRL_OFF(1)); } -static void __init mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) +static void mvebu_pcie_setup_hw(struct mvebu_pcie_port *port) { - u16 cmd; - u32 mask; + u32 cmd, mask; /* Point PCIe unit MBUS decode windows to DRAM space. */ mvebu_pcie_setup_wins(port); /* Master + slave enable. */ - cmd = readw(port->base + PCIE_CMD_OFF); + cmd = mvebu_readl(port, PCIE_CMD_OFF); cmd |= PCI_COMMAND_IO; cmd |= PCI_COMMAND_MEMORY; cmd |= PCI_COMMAND_MASTER; - writew(cmd, port->base + PCIE_CMD_OFF); + mvebu_writel(port, cmd, PCIE_CMD_OFF); /* Enable interrupt lines A-D. */ - mask = readl(port->base + PCIE_MASK_OFF); + mask = mvebu_readl(port, PCIE_MASK_OFF); mask |= PCIE_MASK_ENABLE_INTS; - writel(mask, port->base + PCIE_MASK_OFF); + mvebu_writel(port, mask, PCIE_MASK_OFF); } static int mvebu_pcie_hw_rd_conf(struct mvebu_pcie_port *port, struct pci_bus *bus, u32 devfn, int where, int size, u32 *val) { - writel(PCIE_CONF_ADDR(bus->number, devfn, where), - port->base + PCIE_CONF_ADDR_OFF); + mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where), + PCIE_CONF_ADDR_OFF); - *val = readl(port->base + PCIE_CONF_DATA_OFF); + *val = mvebu_readl(port, PCIE_CONF_DATA_OFF); if (size == 1) *val = (*val >> (8 * (where & 3))) & 0xff; @@ -257,21 +274,24 @@ static int mvebu_pcie_hw_wr_conf(struct mvebu_pcie_port *port, struct pci_bus *bus, u32 devfn, int where, int size, u32 val) { - int ret = PCIBIOS_SUCCESSFUL; + u32 _val, shift = 8 * (where & 3); - writel(PCIE_CONF_ADDR(bus->number, devfn, where), - port->base + PCIE_CONF_ADDR_OFF); + mvebu_writel(port, PCIE_CONF_ADDR(bus->number, devfn, where), + PCIE_CONF_ADDR_OFF); + _val = mvebu_readl(port, PCIE_CONF_DATA_OFF); if (size == 4) - writel(val, port->base + PCIE_CONF_DATA_OFF); + _val = val; else if (size == 2) - writew(val, port->base + PCIE_CONF_DATA_OFF + (where & 3)); + _val = (_val & ~(0xffff << shift)) | ((val & 0xffff) << shift); else if (size == 1) - writeb(val, port->base + PCIE_CONF_DATA_OFF + (where & 3)); + _val = (_val & ~(0xff << shift)) | ((val & 0xff) << shift); else - ret = PCIBIOS_BAD_REGISTER_NUMBER; + return PCIBIOS_BAD_REGISTER_NUMBER; - return ret; + mvebu_writel(port, _val, PCIE_CONF_DATA_OFF); + + return PCIBIOS_SUCCESSFUL; } static void mvebu_pcie_handle_iobase_change(struct mvebu_pcie_port *port) @@ -552,7 +572,7 @@ static int mvebu_pcie_wr_conf(struct pci_bus *bus, u32 devfn, if (bus->number == 0) return mvebu_sw_pci_bridge_write(port, where, size, val); - if (!port->haslink) + if (!mvebu_pcie_link_up(port)) return PCIBIOS_DEVICE_NOT_FOUND; /* @@ -594,7 +614,7 @@ static int mvebu_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, if (bus->number == 0) return mvebu_sw_pci_bridge_read(port, where, size, val); - if (!port->haslink) { + if (!mvebu_pcie_link_up(port)) { *val = 0xffffffff; return PCIBIOS_DEVICE_NOT_FOUND; } @@ -626,7 +646,7 @@ static struct pci_ops mvebu_pcie_ops = { .write = mvebu_pcie_wr_conf, }; -static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys) +static int mvebu_pcie_setup(int nr, struct pci_sys_data *sys) { struct mvebu_pcie *pcie = sys_to_pcie(sys); int i; @@ -645,7 +665,7 @@ static int __init mvebu_pcie_setup(int nr, struct pci_sys_data *sys) return 1; } -static int __init mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +static int mvebu_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { struct of_irq oirq; int ret; @@ -673,11 +693,17 @@ static struct pci_bus *mvebu_pcie_scan_bus(int nr, struct pci_sys_data *sys) return bus; } -resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev, - const struct resource *res, - resource_size_t start, - resource_size_t size, - resource_size_t align) +static void mvebu_pcie_add_bus(struct pci_bus *bus) +{ + struct mvebu_pcie *pcie = sys_to_pcie(bus->sysdata); + bus->msi = pcie->msi; +} + +static resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev, + const struct resource *res, + resource_size_t start, + resource_size_t size, + resource_size_t align) { if (dev->bus->number != 0) return start; @@ -696,7 +722,7 @@ resource_size_t mvebu_pcie_align_resource(struct pci_dev *dev, return start; } -static void __init mvebu_pcie_enable(struct mvebu_pcie *pcie) +static void mvebu_pcie_enable(struct mvebu_pcie *pcie) { struct hw_pci hw; @@ -709,6 +735,7 @@ static void __init mvebu_pcie_enable(struct mvebu_pcie *pcie) hw.map_irq = mvebu_pcie_map_irq; hw.ops = &mvebu_pcie_ops; hw.align_resource = mvebu_pcie_align_resource; + hw.add_bus = mvebu_pcie_add_bus; pci_common_init(&hw); } @@ -718,10 +745,8 @@ static void __init mvebu_pcie_enable(struct mvebu_pcie *pcie) * <...> property for one that matches the given port/lane. Once * found, maps it. */ -static void __iomem * __init -mvebu_pcie_map_registers(struct platform_device *pdev, - struct device_node *np, - struct mvebu_pcie_port *port) +static void __iomem *mvebu_pcie_map_registers(struct platform_device *pdev, + struct device_node *np, struct mvebu_pcie_port *port) { struct resource regs; int ret = 0; @@ -777,7 +802,22 @@ static int mvebu_get_tgt_attr(struct device_node *np, int devfn, return -ENOENT; } -static int __init mvebu_pcie_probe(struct platform_device *pdev) +static void mvebu_pcie_msi_enable(struct mvebu_pcie *pcie) +{ + struct device_node *msi_node; + + msi_node = of_parse_phandle(pcie->pdev->dev.of_node, + "msi-parent", 0); + if (!msi_node) + return; + + pcie->msi = of_pci_find_msi_chip_by_node(msi_node); + + if (pcie->msi) + pcie->msi->dev = &pcie->pdev->dev; +} + +static int mvebu_pcie_probe(struct platform_device *pdev) { struct mvebu_pcie *pcie; struct device_node *np = pdev->dev.of_node; @@ -790,6 +830,7 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev) return -ENOMEM; pcie->pdev = pdev; + platform_set_drvdata(pdev, pcie); /* Get the PCIe memory and I/O aperture */ mvebu_mbus_get_pcie_mem_aperture(&pcie->mem); @@ -818,13 +859,14 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev) return ret; } + i = 0; for_each_child_of_node(pdev->dev.of_node, child) { if (!of_device_is_available(child)) continue; - pcie->nports++; + i++; } - pcie->ports = devm_kzalloc(&pdev->dev, pcie->nports * + pcie->ports = devm_kzalloc(&pdev->dev, i * sizeof(struct mvebu_pcie_port), GFP_KERNEL); if (!pcie->ports) @@ -833,6 +875,7 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev) i = 0; for_each_child_of_node(pdev->dev.of_node, child) { struct mvebu_pcie_port *port = &pcie->ports[i]; + enum of_gpio_flags flags; if (!of_device_is_available(child)) continue; @@ -873,45 +916,68 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev) continue; } + port->reset_gpio = of_get_named_gpio_flags(child, + "reset-gpios", 0, &flags); + if (gpio_is_valid(port->reset_gpio)) { + u32 reset_udelay = 20000; + + port->reset_active_low = flags & OF_GPIO_ACTIVE_LOW; + port->reset_name = kasprintf(GFP_KERNEL, + "pcie%d.%d-reset", port->port, port->lane); + of_property_read_u32(child, "reset-delay-us", + &reset_udelay); + + ret = devm_gpio_request_one(&pdev->dev, + port->reset_gpio, GPIOF_DIR_OUT, port->reset_name); + if (ret) { + if (ret == -EPROBE_DEFER) + return ret; + continue; + } + + gpio_set_value(port->reset_gpio, + (port->reset_active_low) ? 1 : 0); + msleep(reset_udelay/1000); + } + + port->clk = of_clk_get_by_name(child, NULL); + if (IS_ERR(port->clk)) { + dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n", + port->port, port->lane); + continue; + } + + ret = clk_prepare_enable(port->clk); + if (ret) + continue; + port->base = mvebu_pcie_map_registers(pdev, child, port); if (IS_ERR(port->base)) { dev_err(&pdev->dev, "PCIe%d.%d: cannot map registers\n", port->port, port->lane); port->base = NULL; + clk_disable_unprepare(port->clk); continue; } mvebu_pcie_set_local_dev_nr(port, 1); - if (mvebu_pcie_link_up(port)) { - port->haslink = 1; - dev_info(&pdev->dev, "PCIe%d.%d: link up\n", - port->port, port->lane); - } else { - port->haslink = 0; - dev_info(&pdev->dev, "PCIe%d.%d: link down\n", - port->port, port->lane); - } - port->clk = of_clk_get_by_name(child, NULL); if (IS_ERR(port->clk)) { dev_err(&pdev->dev, "PCIe%d.%d: cannot get clock\n", port->port, port->lane); iounmap(port->base); - port->haslink = 0; continue; } port->dn = child; - - clk_prepare_enable(port->clk); spin_lock_init(&port->conf_lock); - mvebu_sw_pci_bridge_init(port); - i++; } + pcie->nports = i; + mvebu_pcie_msi_enable(pcie); mvebu_pcie_enable(pcie); return 0; @@ -920,6 +986,7 @@ static int __init mvebu_pcie_probe(struct platform_device *pdev) static const struct of_device_id mvebu_pcie_of_match_table[] = { { .compatible = "marvell,armada-xp-pcie", }, { .compatible = "marvell,armada-370-pcie", }, + { .compatible = "marvell,dove-pcie", }, { .compatible = "marvell,kirkwood-pcie", }, {}, }; @@ -931,16 +998,12 @@ static struct platform_driver mvebu_pcie_driver = { .name = "mvebu-pcie", .of_match_table = of_match_ptr(mvebu_pcie_of_match_table), + /* driver unloading/unbinding currently not supported */ + .suppress_bind_attrs = true, }, + .probe = mvebu_pcie_probe, }; - -static int __init mvebu_pcie_init(void) -{ - return platform_driver_probe(&mvebu_pcie_driver, - mvebu_pcie_probe); -} - -subsys_initcall(mvebu_pcie_init); +module_platform_driver(mvebu_pcie_driver); MODULE_AUTHOR("Thomas Petazzoni "); MODULE_DESCRIPTION("Marvell EBU PCIe driver"); diff --git a/include/linux/platform_data/dma-s3c24xx.h b/include/linux/platform_data/dma-s3c24xx.h new file mode 100644 index 0000000000000000000000000000000000000000..89ba1b0c90e49dd6d193cd80e154fcf8b4d5870d --- /dev/null +++ b/include/linux/platform_data/dma-s3c24xx.h @@ -0,0 +1,46 @@ +/* + * S3C24XX DMA handling + * + * Copyright (c) 2013 Heiko Stuebner + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +/* Helper to encode the source selection constraints for early s3c socs. */ +#define S3C24XX_DMA_CHANREQ(src, chan) ((BIT(3) | src) << chan * 4) + +enum s3c24xx_dma_bus { + S3C24XX_DMA_APB, + S3C24XX_DMA_AHB, +}; + +/** + * @bus: on which bus does the peripheral reside - AHB or APB. + * @handshake: is a handshake with the peripheral necessary + * @chansel: channel selection information, depending on variant; reqsel for + * s3c2443 and later and channel-selection map for earlier SoCs + * see CHANSEL doc in s3c2443-dma.c + */ +struct s3c24xx_dma_channel { + enum s3c24xx_dma_bus bus; + bool handshake; + u16 chansel; +}; + +/** + * struct s3c24xx_dma_platdata - platform specific settings + * @num_phy_channels: number of physical channels + * @channels: array of virtual channel descriptions + * @num_channels: number of virtual channels + */ +struct s3c24xx_dma_platdata { + int num_phy_channels; + struct s3c24xx_dma_channel *channels; + int num_channels; +}; + +struct dma_chan; +bool s3c24xx_dma_filter(struct dma_chan *chan, void *param); diff --git a/include/linux/platform_data/gpio-davinci.h b/include/linux/platform_data/gpio-davinci.h new file mode 100644 index 0000000000000000000000000000000000000000..6efd202645858763339d0cffae47be4ec53dff5e --- /dev/null +++ b/include/linux/platform_data/gpio-davinci.h @@ -0,0 +1,60 @@ +/* + * DaVinci GPIO Platform Related Defines + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DAVINCI_GPIO_PLATFORM_H +#define __DAVINCI_GPIO_PLATFORM_H + +#include +#include + +#include + +enum davinci_gpio_type { + GPIO_TYPE_TNETV107X = 0, +}; + +struct davinci_gpio_platform_data { + u32 ngpio; + u32 gpio_unbanked; + u32 intc_irq_num; +}; + + +struct davinci_gpio_controller { + struct gpio_chip chip; + int irq_base; + /* Serialize access to GPIO registers */ + spinlock_t lock; + void __iomem *regs; + void __iomem *set_data; + void __iomem *clr_data; + void __iomem *in_data; + int gpio_unbanked; + unsigned gpio_irq; +}; + +/* + * basic gpio routines + */ +#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */ + +/* Convert GPIO signal to GPIO pin number */ +#define GPIO_TO_PIN(bank, gpio) (16 * (bank) + (gpio)) + +static inline u32 __gpio_mask(unsigned gpio) +{ + return 1 << (gpio % 32); +} +#endif diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index 2eea1840315d3448248109215f216d2f607c0b89..37459dfd168d3d16362330cdf0ba047d29d41e97 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -2,7 +2,7 @@ config SND_SOC_SAMSUNG tristate "ASoC support for Samsung" depends on PLAT_SAMSUNG select S3C64XX_DMA if ARCH_S3C64XX - select S3C2410_DMA if ARCH_S3C24XX + select S3C24XX_DMA if ARCH_S3C24XX help Say Y or M if you want to add support for codecs attached to the Samsung SoCs' Audio interfaces. You will also need to