From 501c9c0802d9fee05efb300de06c8b3d04f17458 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 27 Jul 2009 14:47:40 -0700 Subject: [PATCH] USB: at91: Add USB EHCI driver for at91sam9g45 series Add host USB High speed driver for at91sam9g45 series. The host driver is an EHCI with its companion OHCI. EHCI is handled by the new ehci-atmel.c whereas the OHCI is always handled by ohci-at91.c. Signed-off-by: Nicolas Ferre Acked-by: David Brownell --- drivers/usb/Kconfig | 1 + drivers/usb/host/ehci-atmel.c | 230 ++++++++++++++++++++++++++++++++++ drivers/usb/host/ehci-hcd.c | 5 + 3 files changed, 236 insertions(+) create mode 100644 drivers/usb/host/ehci-atmel.c diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 93cee3e5ca58..ebd7237230e3 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -60,6 +60,7 @@ config USB_ARCH_HAS_EHCI default y if SOC_AU1200 default y if ARCH_IXP4XX default y if ARCH_W90X900 + default y if ARCH_AT91SAM9G45 default PCI # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface. diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c new file mode 100644 index 000000000000..87c1b7c34c0e --- /dev/null +++ b/drivers/usb/host/ehci-atmel.c @@ -0,0 +1,230 @@ +/* + * Driver for EHCI UHP on Atmel chips + * + * Copyright (C) 2009 Atmel Corporation, + * Nicolas Ferre + * + * Based on various ehci-*.c drivers + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include +#include + +/* interface and function clocks */ +static struct clk *iclk, *fclk; +static int clocked; + +/*-------------------------------------------------------------------------*/ + +static void atmel_start_clock(void) +{ + clk_enable(iclk); + clk_enable(fclk); + clocked = 1; +} + +static void atmel_stop_clock(void) +{ + clk_disable(fclk); + clk_disable(iclk); + clocked = 0; +} + +static void atmel_start_ehci(struct platform_device *pdev) +{ + dev_dbg(&pdev->dev, "start\n"); + atmel_start_clock(); +} + +static void atmel_stop_ehci(struct platform_device *pdev) +{ + dev_dbg(&pdev->dev, "stop\n"); + atmel_stop_clock(); +} + +/*-------------------------------------------------------------------------*/ + +static int ehci_atmel_setup(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval = 0; + + /* registers start at offset 0x0 */ + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + dbg_hcs_params(ehci, "reset"); + dbg_hcc_params(ehci, "reset"); + + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + + retval = ehci_halt(ehci); + if (retval) + return retval; + + /* data structure init */ + retval = ehci_init(hcd); + if (retval) + return retval; + + ehci->sbrn = 0x20; + + ehci_reset(ehci); + ehci_port_power(ehci, 0); + + return retval; +} + +static const struct hc_driver ehci_atmel_hc_driver = { + .description = hcd_name, + .product_desc = "Atmel EHCI UHP HS", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* generic hardware linkage */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* basic lifecycle operations */ + .reset = ehci_atmel_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* managing i/o requests and associated device resources */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + + /* scheduling support */ + .get_frame_number = ehci_get_frame, + + /* root hub support */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, +}; + +static int __init ehci_atmel_drv_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + const struct hc_driver *driver = &ehci_atmel_hc_driver; + struct resource *res; + int irq; + int retval; + + if (usb_disabled()) + return -ENODEV; + + pr_debug("Initializing Atmel-SoC USB Host Controller\n"); + + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(&pdev->dev, + "Found HC with no IRQ. Check %s setup!\n", + dev_name(&pdev->dev)); + retval = -ENODEV; + goto fail_create_hcd; + } + + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + retval = -ENOMEM; + goto fail_create_hcd; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, + "Found HC with no register addr. Check %s setup!\n", + dev_name(&pdev->dev)); + retval = -ENODEV; + goto fail_request_resource; + } + hcd->rsrc_start = res->start; + hcd->rsrc_len = res->end - res->start + 1; + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, + driver->description)) { + dev_dbg(&pdev->dev, "controller already in use\n"); + retval = -EBUSY; + goto fail_request_resource; + } + + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + if (hcd->regs == NULL) { + dev_dbg(&pdev->dev, "error mapping memory\n"); + retval = -EFAULT; + goto fail_ioremap; + } + + iclk = clk_get(&pdev->dev, "ehci_clk"); + if (IS_ERR(iclk)) { + dev_err(&pdev->dev, "Error getting interface clock\n"); + retval = -ENOENT; + goto fail_get_iclk; + } + fclk = clk_get(&pdev->dev, "uhpck"); + if (IS_ERR(fclk)) { + dev_err(&pdev->dev, "Error getting function clock\n"); + retval = -ENOENT; + goto fail_get_fclk; + } + + atmel_start_ehci(pdev); + + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (retval) + goto fail_add_hcd; + + return retval; + +fail_add_hcd: + atmel_stop_ehci(pdev); + clk_put(fclk); +fail_get_fclk: + clk_put(iclk); +fail_get_iclk: + iounmap(hcd->regs); +fail_ioremap: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +fail_request_resource: + usb_put_hcd(hcd); +fail_create_hcd: + dev_err(&pdev->dev, "init %s fail, %d\n", + dev_name(&pdev->dev), retval); + + return retval; +} + +static int __exit ehci_atmel_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + ehci_shutdown(hcd); + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + + atmel_stop_ehci(pdev); + clk_put(fclk); + clk_put(iclk); + fclk = iclk = NULL; + + return 0; +} + +static struct platform_driver ehci_atmel_driver = { + .probe = ehci_atmel_drv_probe, + .remove = __exit_p(ehci_atmel_drv_remove), + .shutdown = usb_hcd_platform_shutdown, + .driver.name = "atmel-ehci", +}; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 5fbc67c5a913..c227ba46d6f3 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1136,6 +1136,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_hcd_w90x900_driver #endif +#ifdef CONFIG_ARCH_AT91 +#include "ehci-atmel.c" +#define PLATFORM_DRIVER ehci_atmel_driver +#endif + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) #error "missing bus glue for ehci-hcd" -- GitLab