提交 4f062896 编写于 作者: R Rusty Russell

cpumask: use new cpumask functions throughout x86

Impact: cleanup

1) &cpu_online_map -> cpu_online_mask
2) first_cpu/next_cpu_nr -> cpumask_first/cpumask_next
3) cpu_*_map manipulation -> init_cpu_* / set_cpu_*
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
上级 3f76a183
......@@ -174,11 +174,11 @@ static inline int early_cpu_to_node(int cpu)
static inline const cpumask_t *cpumask_of_node(int node)
{
return &cpu_online_map;
return cpu_online_mask;
}
static inline int node_to_first_cpu(int node)
{
return first_cpu(cpu_online_map);
return cpumask_first(cpu_online_mask);
}
static inline void setup_node_to_cpumask_map(void) { }
......
......@@ -26,12 +26,12 @@ static int bigsmp_apic_id_registered(void)
return 1;
}
static const cpumask_t *bigsmp_target_cpus(void)
static const struct cpumask *bigsmp_target_cpus(void)
{
#ifdef CONFIG_SMP
return &cpu_online_map;
return cpu_online_mask;
#else
return &cpumask_of_cpu(0);
return cpumask_of(0);
#endif
}
......@@ -118,9 +118,9 @@ static int bigsmp_check_phys_apicid_present(int boot_cpu_physical_apicid)
}
/* As we are using single CPU as destination, pick only one CPU here */
static unsigned int bigsmp_cpu_mask_to_apicid(const cpumask_t *cpumask)
static unsigned int bigsmp_cpu_mask_to_apicid(const struct cpumask *cpumask)
{
return bigsmp_cpu_to_logical_apicid(first_cpu(*cpumask));
return bigsmp_cpu_to_logical_apicid(cpumask_first(cpumask));
}
static unsigned int bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
......@@ -188,10 +188,10 @@ static const struct dmi_system_id bigsmp_dmi_table[] = {
{ } /* NULL entry stops DMI scanning */
};
static void bigsmp_vector_allocation_domain(int cpu, cpumask_t *retmask)
static void bigsmp_vector_allocation_domain(int cpu, struct cpumask *retmask)
{
cpus_clear(*retmask);
cpu_set(cpu, *retmask);
cpumask_clear(retmask);
cpumask_set_cpu(cpu, retmask);
}
static int probe_bigsmp(void)
......
......@@ -460,9 +460,9 @@ static const cpumask_t *target_cpus_cluster(void)
return cpu_all_mask;
}
static const cpumask_t *es7000_target_cpus(void)
static const struct cpumask *es7000_target_cpus(void)
{
return &cpumask_of_cpu(smp_processor_id());
return cpumask_of(smp_processor_id());
}
static unsigned long
......@@ -517,7 +517,7 @@ static void es7000_setup_apic_routing(void)
"Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n",
(apic_version[apic] == 0x14) ?
"Physical Cluster" : "Logical Cluster",
nr_ioapics, cpus_addr(*es7000_target_cpus())[0]);
nr_ioapics, cpumask_bits(es7000_target_cpus())[0]);
}
static int es7000_apicid_to_node(int logical_apicid)
......
......@@ -192,7 +192,7 @@ static const cpumask_t *summit_target_cpus(void)
* dest_LowestPrio mode logical clustered apic interrupt routing
* Just start on cpu 0. IRQ balancing will spread load
*/
return &cpumask_of_cpu(0);
return cpumask_of(0);
}
static unsigned long summit_check_apicid_used(physid_mask_t bitmap, int apicid)
......
......@@ -249,7 +249,7 @@ void cmci_rediscover(int dying)
for_each_online_cpu (cpu) {
if (cpu == dying)
continue;
if (set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu)))
if (set_cpus_allowed_ptr(current, cpumask_of(cpu)))
continue;
/* Recheck banks in case CPUs don't all have the same */
if (cmci_supported(&banks))
......
......@@ -143,9 +143,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
static void *c_start(struct seq_file *m, loff_t *pos)
{
if (*pos == 0) /* just in case, cpu 0 is not the first */
*pos = first_cpu(cpu_online_map);
*pos = cpumask_first(cpu_online_mask);
else
*pos = next_cpu_nr(*pos - 1, cpu_online_map);
*pos = cpumask_next(*pos - 1, cpu_online_mask);
if ((*pos) < nr_cpu_ids)
return &cpu_data(*pos);
return NULL;
......
......@@ -324,7 +324,7 @@ void stop_this_cpu(void *dummy)
/*
* Remove this CPU:
*/
cpu_clear(smp_processor_id(), cpu_online_map);
set_cpu_online(smp_processor_id(), false);
disable_local_APIC();
for (;;) {
......
......@@ -296,7 +296,7 @@ notrace static void __cpuinit start_secondary(void *unused)
__flush_tlb_all();
#endif
/* This must be done before setting cpu_online_map */
/* This must be done before setting cpu_online_mask */
set_cpu_sibling_map(raw_smp_processor_id());
wmb();
......@@ -904,9 +904,8 @@ int __cpuinit native_cpu_up(unsigned int cpu)
*/
static __init void disable_smp(void)
{
/* use the read/write pointers to the present and possible maps */
cpumask_copy(&cpu_present_map, cpumask_of(0));
cpumask_copy(&cpu_possible_map, cpumask_of(0));
init_cpu_present(cpumask_of(0));
init_cpu_possible(cpumask_of(0));
smpboot_clear_io_apic_irqs();
if (smp_found_config)
......@@ -1149,11 +1148,11 @@ early_param("possible_cpus", _setup_possible_cpus);
/*
* cpu_possible_map should be static, it cannot change as cpu's
* cpu_possible_mask should be static, it cannot change as cpu's
* are onlined, or offlined. The reason is per-cpu data-structures
* are allocated by some modules at init time, and dont expect to
* do this dynamically on cpu arrival/departure.
* cpu_present_map on the other hand can change dynamically.
* cpu_present_mask on the other hand can change dynamically.
* In case when cpu_hotplug is not compiled, then we resort to current
* behaviour, which is cpu_possible == cpu_present.
* - Ashok Raj
......
......@@ -158,7 +158,7 @@ static void __init xen_fill_possible_map(void)
rc = HYPERVISOR_vcpu_op(VCPUOP_is_up, i, NULL);
if (rc >= 0) {
num_processors++;
cpu_set(i, cpu_possible_map);
set_cpu_possible(i, true);
}
}
}
......@@ -197,7 +197,7 @@ static void __init xen_smp_prepare_cpus(unsigned int max_cpus)
while ((num_possible_cpus() > 1) && (num_possible_cpus() > max_cpus)) {
for (cpu = nr_cpu_ids - 1; !cpu_possible(cpu); cpu--)
continue;
cpu_clear(cpu, cpu_possible_map);
set_cpu_possible(cpu, false);
}
for_each_possible_cpu (cpu) {
......@@ -210,7 +210,7 @@ static void __init xen_smp_prepare_cpus(unsigned int max_cpus)
if (IS_ERR(idle))
panic("failed fork for CPU %d", cpu);
cpu_set(cpu, cpu_present_map);
set_cpu_present(cpu, true);
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册