[POWERPC] Virtex: add xilinx interrupt controller driver

Adds support for the Xilinx opb-intc interrupt controller
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

arch/powerpc/sysdev/Makefile

@@ -26,6 +26,7 @@ obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
 obj-$(CONFIG_PPC_I8259)		+= i8259.o
 obj-$(CONFIG_PPC_83xx)		+= ipic.o
 obj-$(CONFIG_4xx)		+= uic.o
+obj-$(CONFIG_XILINX_VIRTEX)	+= xilinx_intc.o
 endif
 
 # Temporary hack until we have migrated to asm-powerpc

arch/powerpc/sysdev/xilinx_intc.c

+/*
+ * Interrupt controller driver for Xilinx Virtex FPGAs
+ *
+ * Copyright (C) 2007 Secret Lab Technologies Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+/*
+ * This is a driver for the interrupt controller typically found in
+ * Xilinx Virtex FPGA designs.
+ *
+ * The interrupt sense levels are hard coded into the FPGA design with
+ * typically a 1:1 relationship between irq lines and devices (no shared
+ * irq lines).  Therefore, this driver does not attempt to handle edge
+ * and level interrupts differently.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/irq.h>
+
+/*
+ * INTC Registers
+ */
+#define XINTC_ISR	0	/* Interrupt Status */
+#define XINTC_IPR	4	/* Interrupt Pending */
+#define XINTC_IER	8	/* Interrupt Enable */
+#define XINTC_IAR	12	/* Interrupt Acknowledge */
+#define XINTC_SIE	16	/* Set Interrupt Enable bits */
+#define XINTC_CIE	20	/* Clear Interrupt Enable bits */
+#define XINTC_IVR	24	/* Interrupt Vector */
+#define XINTC_MER	28	/* Master Enable */
+
+static struct irq_host *master_irqhost;
+
+/*
+ * IRQ Chip operations
+ */
+static void xilinx_intc_mask(unsigned int virq)
+{
+	int irq = virq_to_hw(virq);
+	void * regs = get_irq_chip_data(virq);
+	pr_debug("mask: %d\n", irq);
+	out_be32(regs + XINTC_CIE, 1 << irq);
+}
+
+static void xilinx_intc_unmask(unsigned int virq)
+{
+	int irq = virq_to_hw(virq);
+	void * regs = get_irq_chip_data(virq);
+	pr_debug("unmask: %d\n", irq);
+	out_be32(regs + XINTC_SIE, 1 << irq);
+}
+
+static void xilinx_intc_ack(unsigned int virq)
+{
+	int irq = virq_to_hw(virq);
+	void * regs = get_irq_chip_data(virq);
+	pr_debug("ack: %d\n", irq);
+	out_be32(regs + XINTC_IAR, 1 << irq);
+}
+
+static struct irq_chip xilinx_intc_irqchip = {
+	.typename = "Xilinx INTC",
+	.mask = xilinx_intc_mask,
+	.unmask = xilinx_intc_unmask,
+	.ack = xilinx_intc_ack,
+};
+
+/*
+ * IRQ Host operations
+ */
+static int xilinx_intc_map(struct irq_host *h, unsigned int virq,
+				  irq_hw_number_t irq)
+{
+	set_irq_chip_data(virq, h->host_data);
+	set_irq_chip_and_handler(virq, &xilinx_intc_irqchip, handle_level_irq);
+	set_irq_type(virq, IRQ_TYPE_NONE);
+	return 0;
+}
+
+static struct irq_host_ops xilinx_intc_ops = {
+	.map = xilinx_intc_map,
+};
+
+struct irq_host * __init
+xilinx_intc_init(struct device_node *np)
+{
+	struct irq_host * irq;
+	struct resource res;
+	void * regs;
+	int rc;
+
+	/* Find and map the intc registers */
+	rc = of_address_to_resource(np, 0, &res);
+	if (rc) {
+		printk(KERN_ERR __FILE__ ": of_address_to_resource() failed\n");
+		return NULL;
+	}
+	regs = ioremap(res.start, 32);
+
+	printk(KERN_INFO "Xilinx intc at 0x%08X mapped to 0x%p\n",
+		res.start, regs);
+
+	/* Setup interrupt controller */
+	out_be32(regs + XINTC_IER, 0); /* disable all irqs */
+	out_be32(regs + XINTC_IAR, ~(u32) 0); /* Acknowledge pending irqs */
+	out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */
+
+	/* Allocate and initialize an irq_host structure. */
+	irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 32, &xilinx_intc_ops, -1);
+	if (!irq)
+		panic(__FILE__ ": Cannot allocate IRQ host\n");
+	irq->host_data = regs;
+	return irq;
+}
+
+int xilinx_intc_get_irq(void)
+{
+	void * regs = master_irqhost->host_data;
+	pr_debug("get_irq:\n");
+	return irq_linear_revmap(master_irqhost, in_be32(regs + XINTC_IVR));
+}
+
+void __init xilinx_intc_init_tree(void)
+{
+	struct device_node *np;
+
+	/* find top level interrupt controller */
+	for_each_compatible_node(np, NULL, "xilinx,intc") {
+		if (!of_get_property(np, "interrupts", NULL))
+			break;
+	}
+
+	/* xilinx interrupt controller needs to be top level */
+	BUG_ON(!np);
+
+	master_irqhost = xilinx_intc_init(np);
+	BUG_ON(!master_irqhost);
+
+	irq_set_default_host(master_irqhost);
+	of_node_put(np);
+}

include/asm-powerpc/xilinx_intc.h

+/*
+ * Xilinx intc external definitions
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_XILINX_INTC_H
+#define _ASM_POWERPC_XILINX_INTC_H
+
+#ifdef __KERNEL__
+
+extern void __init xilinx_intc_init_tree(void);
+extern unsigned int xilinx_intc_get_irq(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_XILINX_INTC_H */