ide: add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag

* Add IDE_HFLAG_ABUSE_SET_DMA_MODE host flag and use it to decide
  what to do with transfer modes < XFER_PIO_0 in ide_set_xfer_rate().

* Set IDE_HFLAG_ABUSE_SET_DMA_MODE in host drivers that need it
  (aec62xx, amd74xx, cs5520, cs5535, hpt34x, hpt366, pdc202xx_old,
  serverworks, tc86c001 and via82cxxx) and cleanup ->set_dma_mode
  methods in host drivers that don't (IDE core code guarantees that
  ->set_dma_mode will be called only for modes which are present
  in SWDMA/MWDMA/UDMA masks).

While at it:

* Add IDE_HFLAGS_HPT34X/HPT3XX/PDC202XX/SVWKS define in
  hpt34x/hpt366/pdc202xx_old/serverworks host driver.

There should be no functionality changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
上级 428c6440
......@@ -272,8 +272,6 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode)
case XFER_SW_DMA_0:
cycle_time = 480;
break;
default:
return;
}
/*
......
......@@ -747,8 +747,6 @@ static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed)
strobe = ATA_DMA2_STROBE;
hold = ATA_DMA2_HOLD;
break;
default:
return;
}
if (speed >= XFER_UDMA_0)
......
......@@ -441,6 +441,12 @@ int ide_set_xfer_rate(ide_drive_t *drive, u8 rate)
* case could happen iff the transfer mode has already been set on
* the device by ide-proc.c::set_xfer_rate()).
*/
if (rate < XFER_PIO_0) {
if (hwif->host_flags & IDE_HFLAG_ABUSE_SET_DMA_MODE)
return ide_set_dma_mode(drive, rate);
else
return ide_config_drive_speed(drive, rate);
}
return ide_set_dma_mode(drive, rate);
}
......
......@@ -198,8 +198,6 @@ static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed)
break;
#endif
default:
return;
}
au_writel(mem_sttime,MEM_STTIME2);
......
......@@ -202,6 +202,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.host_flags = IDE_HFLAG_SERIALIZE |
IDE_HFLAG_NO_ATAPI_DMA |
IDE_HFLAG_ABUSE_SET_DMA_MODE |
IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
......@@ -211,6 +212,7 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA |
IDE_HFLAG_ABUSE_SET_DMA_MODE |
IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
......@@ -220,7 +222,8 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.host_flags = IDE_HFLAG_NO_ATAPI_DMA,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA |
IDE_HFLAG_ABUSE_SET_DMA_MODE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA4,
......@@ -228,7 +231,9 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
.name = "AEC6280",
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA |
IDE_HFLAG_ABUSE_SET_DMA_MODE |
IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
......@@ -237,7 +242,9 @@ static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
.init_chipset = init_chipset_aec62xx,
.init_hwif = init_hwif_aec62xx,
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA |
IDE_HFLAG_ABUSE_SET_DMA_MODE |
IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
......
......@@ -402,9 +402,6 @@ static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
u8 tmpbyte = 0x00;
int m5229_udma = (hwif->channel) ? 0x57 : 0x56;
if (speed < XFER_PIO_0)
return;
if (speed == XFER_UDMA_6)
speed1 = 0x47;
......
......@@ -266,6 +266,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
#define IDE_HFLAGS_AMD \
(IDE_HFLAG_PIO_NO_BLACKLIST | \
IDE_HFLAG_PIO_NO_DOWNGRADE | \
IDE_HFLAG_ABUSE_SET_DMA_MODE | \
IDE_HFLAG_POST_SET_MODE | \
IDE_HFLAG_IO_32BIT | \
IDE_HFLAG_UNMASK_IRQS | \
......
......@@ -133,9 +133,6 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
u32 tmp32;
u16 tmp16;
if (speed < XFER_MW_DMA_0)
return;
spin_lock_irqsave(&atiixp_lock, flags);
save_mdma_mode[drive->dn] = 0;
......
......@@ -322,8 +322,6 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
case XFER_MW_DMA_0:
program_cycle_times(drive, 480, 215);
break;
default:
return;
}
if (speed >= XFER_SW_DMA_0)
......
......@@ -137,6 +137,7 @@ static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
IDE_HFLAG_CS5520 | \
IDE_HFLAG_VDMA | \
IDE_HFLAG_NO_ATAPI_DMA | \
IDE_HFLAG_ABUSE_SET_DMA_MODE |\
IDE_HFLAG_BOOTABLE, \
.pio_mask = ATA_PIO4, \
}
......
......@@ -116,8 +116,6 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
case XFER_MW_DMA_0: timings = 0x00077771; break;
case XFER_MW_DMA_1: timings = 0x00012121; break;
case XFER_MW_DMA_2: timings = 0x00002020; break;
default:
return;
}
basereg = CS5530_BASEREG(drive->hwif);
reg = inl(basereg + 4); /* get drive0 config register */
......
......@@ -190,7 +190,7 @@ static const struct ide_port_info cs5535_chipset __devinitdata = {
.name = "CS5535",
.init_hwif = init_hwif_cs5535,
.host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE |
IDE_HFLAG_BOOTABLE,
IDE_HFLAG_ABUSE_SET_DMA_MODE | IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA4,
......
......@@ -129,14 +129,18 @@ static void __devinit init_hwif_hpt34x(ide_hwif_t *hwif)
hwif->set_dma_mode = &hpt34x_set_mode;
}
#define IDE_HFLAGS_HPT34X \
(IDE_HFLAG_NO_ATAPI_DMA | \
IDE_HFLAG_ABUSE_SET_DMA_MODE | \
IDE_HFLAG_NO_AUTODMA)
static const struct ide_port_info hpt34x_chipsets[] __devinitdata = {
{ /* 0 */
.name = "HPT343",
.init_chipset = init_chipset_hpt34x,
.init_hwif = init_hwif_hpt34x,
.extra = 16,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA |
IDE_HFLAG_NO_AUTODMA,
.host_flags = IDE_HFLAGS_HPT34X,
.pio_mask = ATA_PIO5,
},
{ /* 1 */
......@@ -144,9 +148,7 @@ static const struct ide_port_info hpt34x_chipsets[] __devinitdata = {
.init_chipset = init_chipset_hpt34x,
.init_hwif = init_hwif_hpt34x,
.extra = 16,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA |
IDE_HFLAG_NO_AUTODMA |
IDE_HFLAG_OFF_BOARD,
.host_flags = IDE_HFLAGS_HPT34X | IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO5,
#ifdef CONFIG_HPT34X_AUTODMA
.swdma_mask = ATA_SWDMA2,
......
......@@ -1461,6 +1461,11 @@ static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2)
return 0;
}
#define IDE_HFLAGS_HPT3XX \
(IDE_HFLAG_NO_ATAPI_DMA | \
IDE_HFLAG_ABUSE_SET_DMA_MODE | \
IDE_HFLAG_OFF_BOARD)
static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
{ /* 0 */
.name = "HPT36x",
......@@ -1475,9 +1480,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
*/
.enablebits = {{0x50,0x10,0x10}, {0x54,0x04,0x04}},
.extra = 240,
.host_flags = IDE_HFLAG_SINGLE |
IDE_HFLAG_NO_ATAPI_DMA |
IDE_HFLAG_OFF_BOARD,
.host_flags = IDE_HFLAGS_HPT3XX | IDE_HFLAG_SINGLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
},{ /* 1 */
......@@ -1487,7 +1490,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.extra = 240,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
.host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
},{ /* 2 */
......@@ -1497,7 +1500,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.extra = 240,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
.host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
},{ /* 3 */
......@@ -1507,7 +1510,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.extra = 240,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
.host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
},{ /* 4 */
......@@ -1518,7 +1521,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.udma_mask = ATA_UDMA5,
.extra = 240,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
.host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
},{ /* 5 */
......@@ -1528,7 +1531,7 @@ static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
.init_dma = init_dma_hpt366,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.extra = 240,
.host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_OFF_BOARD,
.host_flags = IDE_HFLAGS_HPT3XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
}
......
......@@ -101,24 +101,11 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
pci_read_config_byte(dev, 0x54, &reg54);
pci_read_config_byte(dev, 0x55, &reg55);
switch(speed) {
case XFER_UDMA_6:
case XFER_UDMA_4:
case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break;
case XFER_UDMA_5:
case XFER_UDMA_3:
case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break;
case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
break;
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_SW_DMA_2:
break;
default:
return;
}
if (speed >= XFER_UDMA_0) {
u8 udma = speed - XFER_UDMA_0;
u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4);
if (!(reg48 & u_flag))
pci_write_config_byte(dev, 0x48, reg48 | u_flag);
if (speed >= XFER_UDMA_5) {
......
......@@ -162,32 +162,18 @@ static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
if (max_dma_rate(hwif->pci_dev) == 4) {
u8 mode = speed & 0x07;
switch (speed) {
case XFER_UDMA_6:
case XFER_UDMA_5:
case XFER_UDMA_4:
case XFER_UDMA_3:
case XFER_UDMA_2:
case XFER_UDMA_1:
case XFER_UDMA_0:
if (speed >= XFER_UDMA_0) {
set_indexed_reg(hwif, 0x10 + adj,
udma_timings[mode].reg10);
set_indexed_reg(hwif, 0x11 + adj,
udma_timings[mode].reg11);
set_indexed_reg(hwif, 0x12 + adj,
udma_timings[mode].reg12);
break;
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
} else {
set_indexed_reg(hwif, 0x0e + adj,
mwdma_timings[mode].reg0e);
set_indexed_reg(hwif, 0x0f + adj,
mwdma_timings[mode].reg0f);
break;
default:
printk(KERN_ERR "pdc202xx_new: "
"Unknown speed %d ignored\n", speed);
}
} else if (speed == XFER_UDMA_2) {
/* Set tHOLD bit to 0 if using UDMA mode 2 */
......
......@@ -375,6 +375,11 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
}
}
#define IDE_HFLAGS_PDC202XX \
(IDE_HFLAG_ERROR_STOPS_FIFO | \
IDE_HFLAG_ABUSE_SET_DMA_MODE | \
IDE_HFLAG_OFF_BOARD)
#define DECLARE_PDC2026X_DEV(name_str, udma, extra_flags) \
{ \
.name = name_str, \
......@@ -382,9 +387,7 @@ static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
.init_hwif = init_hwif_pdc202xx, \
.init_dma = init_dma_pdc202xx, \
.extra = 48, \
.host_flags = IDE_HFLAG_ERROR_STOPS_FIFO | \
extra_flags | \
IDE_HFLAG_OFF_BOARD, \
.host_flags = IDE_HFLAGS_PDC202XX | extra_flags, \
.pio_mask = ATA_PIO4, \
.mwdma_mask = ATA_MWDMA2, \
.udma_mask = udma, \
......@@ -397,8 +400,7 @@ static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = {
.init_hwif = init_hwif_pdc202xx,
.init_dma = init_dma_pdc202xx,
.extra = 16,
.host_flags = IDE_HFLAG_ERROR_STOPS_FIFO |
IDE_HFLAG_OFF_BOARD,
.host_flags = IDE_HFLAGS_PDC202XX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA2,
......
......@@ -203,20 +203,11 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
pci_read_config_byte(dev, 0x54, &reg54);
pci_read_config_byte(dev, 0x55, &reg55);
switch(speed) {
case XFER_UDMA_4:
case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break;
case XFER_UDMA_5:
case XFER_UDMA_3:
case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break;
case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_SW_DMA_2: break;
default: return;
}
if (speed >= XFER_UDMA_0) {
u8 udma = speed - XFER_UDMA_0;
u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4);
if (!(reg48 & u_flag))
pci_write_config_byte(dev, 0x48, reg48 | u_flag);
if (speed == XFER_UDMA_5) {
......
......@@ -185,8 +185,6 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
case PCI_CLK_66: timings = 0x00015151; break;
}
break;
default:
return;
}
if (unit == 0) { /* are we configuring drive0? */
......
......@@ -254,19 +254,7 @@ static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
offset = 0; /* 100MHz */
}
switch (speed) {
case XFER_UDMA_6:
case XFER_UDMA_5:
case XFER_UDMA_4:
case XFER_UDMA_3:
case XFER_UDMA_2:
case XFER_UDMA_1:
case XFER_UDMA_0:
idx = speed - XFER_UDMA_0;
break;
default:
return;
}
jcactsel = JCACTSELtbl[offset][idx];
if (is_slave) {
......
......@@ -366,12 +366,17 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif)
}
}
#define IDE_HFLAGS_SVWKS \
(IDE_HFLAG_LEGACY_IRQS | \
IDE_HFLAG_ABUSE_SET_DMA_MODE | \
IDE_HFLAG_BOOTABLE)
static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
{ /* 0 */
.name = "SvrWks OSB4",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
.host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
.host_flags = IDE_HFLAGS_SVWKS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = 0x00, /* UDMA is problematic on OSB4 */
......@@ -379,7 +384,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
.name = "SvrWks CSB5",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
.host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
.host_flags = IDE_HFLAGS_SVWKS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
......@@ -387,7 +392,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
.name = "SvrWks CSB6",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
.host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_BOOTABLE,
.host_flags = IDE_HFLAGS_SVWKS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
......@@ -395,8 +400,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
.name = "SvrWks CSB6",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
.host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_SINGLE |
IDE_HFLAG_BOOTABLE,
.host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
......@@ -404,8 +408,7 @@ static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
.name = "SvrWks HT1000",
.init_chipset = init_chipset_svwks,
.init_hwif = init_hwif_svwks,
.host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_SINGLE |
IDE_HFLAG_BOOTABLE,
.host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
......
......@@ -278,27 +278,14 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
scsc = is_sata(hwif) ? 1 : scsc;
switch(speed) {
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
multi = dma[speed - XFER_MW_DMA_0];
mode |= ((unit) ? 0x20 : 0x02);
break;
case XFER_UDMA_6:
case XFER_UDMA_5:
case XFER_UDMA_4:
case XFER_UDMA_3:
case XFER_UDMA_2:
case XFER_UDMA_1:
case XFER_UDMA_0:
if (speed >= XFER_UDMA_0) {
multi = dma[2];
ultra |= ((scsc) ? (ultra6[speed - XFER_UDMA_0]) :
(ultra5[speed - XFER_UDMA_0]));
mode |= ((unit) ? 0x30 : 0x03);
break;
default:
return;
ultra |= (scsc ? ultra6[speed - XFER_UDMA_0] :
ultra5[speed - XFER_UDMA_0]);
mode |= (unit ? 0x30 : 0x03);
} else {
multi = dma[speed - XFER_MW_DMA_0];
mode |= (unit ? 0x20 : 0x02);
}
if (hwif->mmio) {
......
......@@ -351,25 +351,10 @@ static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode)
static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
{
/* Config chip for mode */
switch(speed) {
case XFER_UDMA_6:
case XFER_UDMA_5:
case XFER_UDMA_4:
case XFER_UDMA_3:
case XFER_UDMA_2:
case XFER_UDMA_1:
case XFER_UDMA_0:
if (speed >= XFER_UDMA_0)
sis_program_udma_timings(drive, speed);
break;
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
else
sis_program_timings(drive, speed);
break;
default:
break;
}
}
static u8 sis5513_ata133_udma_filter(ide_drive_t *drive)
......
......@@ -115,10 +115,6 @@ static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
drive->name, ide_xfer_verbose(speed)));
switch (speed) {
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
/*
......@@ -138,10 +134,6 @@ static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
pci_write_config_word(dev, reg, drv_ctrl);
}
break;
default:
return;
}
}
/*
......
......@@ -91,19 +91,9 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
pci_read_config_word(dev, 0x48, &reg48);
pci_read_config_word(dev, 0x4a, &reg4a);
switch(speed) {
case XFER_UDMA_4: u_speed = 4 << (drive->dn * 4); break;
case XFER_UDMA_3: u_speed = 3 << (drive->dn * 4); break;
case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break;
case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break;
case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_SW_DMA_2: break;
default: return;
}
if (speed >= XFER_UDMA_0) {
u_speed = (speed - XFER_UDMA_0) << (drive->dn * 4);
if (!(reg48 & u_flag))
pci_write_config_word(dev, 0x48, reg48|u_flag);
/* FIXME: (reg4a & a_speed) ? */
......
......@@ -222,7 +222,8 @@ static const struct ide_port_info tc86c001_chipset __devinitdata = {
.name = "TC86C001",
.init_chipset = init_chipset_tc86c001,
.init_hwif = init_hwif_tc86c001,
.host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD,
.host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD |
IDE_HFLAG_ABUSE_SET_DMA_MODE,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA4,
......
......@@ -81,8 +81,6 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
case XFER_PIO_0:
timing = 0x0808;
break;
default:
return;
}
triflex_timings &= ~(0xFFFF << (16 * unit));
......
......@@ -439,6 +439,7 @@ static const struct ide_port_info via82cxxx_chipset __devinitdata = {
.enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
.host_flags = IDE_HFLAG_PIO_NO_BLACKLIST |
IDE_HFLAG_PIO_NO_DOWNGRADE |
IDE_HFLAG_ABUSE_SET_DMA_MODE |
IDE_HFLAG_POST_SET_MODE |
IDE_HFLAG_IO_32BIT |
IDE_HFLAG_BOOTABLE,
......
......@@ -828,15 +828,8 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
tl[0] = *timings;
tl[1] = *timings2;
switch(speed) {
#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
case XFER_UDMA_6:
case XFER_UDMA_5:
case XFER_UDMA_4:
case XFER_UDMA_3:
case XFER_UDMA_2:
case XFER_UDMA_1:
case XFER_UDMA_0:
if (speed >= XFER_UDMA_0) {
if (pmif->kind == controller_kl_ata4)
ret = set_timings_udma_ata4(&tl[0], speed);
else if (pmif->kind == controller_un_ata6
......@@ -845,21 +838,10 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
else if (pmif->kind == controller_sh_ata6)
ret = set_timings_udma_shasta(&tl[0], &tl[1], speed);
else
ret = 1;
break;
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
ret = -1;
} else
set_timings_mdma(drive, pmif->kind, &tl[0], &tl[1], speed);
break;
case XFER_SW_DMA_2:
case XFER_SW_DMA_1:
case XFER_SW_DMA_0:
return;
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
default:
ret = 1;
}
if (ret)
return;
......
......@@ -1094,6 +1094,7 @@ enum {
IDE_HFLAG_IO_32BIT = (1 << 24),
/* unmask IRQs */
IDE_HFLAG_UNMASK_IRQS = (1 << 25),
IDE_HFLAG_ABUSE_SET_DMA_MODE = (1 << 26),
};
#ifdef CONFIG_BLK_DEV_OFFBOARD
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册