提交 4d7db04a 编写于 作者: J James Bottomley 提交者: James Bottomley

[SCSI] add SCSI_UNKNOWN and LUN transfer limit restrictions

Original From: Ingo Flaschberger <if@xip.at>

To support the RA4100 array from Compaq.

This patch now correctly handles SCSI_UNKNOWN types with regard to
BLIST_REPORTLUNS2 (allow it) and cdb[1] LUN inclusion (don't).

It also allows a BLIST_MAX_512 flag to restrict the maximum transfer
length to 512 blocks (apparently this is an RA4100 problem).
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
上级 d637c454
......@@ -565,7 +565,8 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
/*
* If SCSI-2 or lower, store the LUN value in cmnd.
*/
if (cmd->device->scsi_level <= SCSI_2) {
if (cmd->device->scsi_level <= SCSI_2 &&
cmd->device->scsi_level != SCSI_UNKNOWN) {
cmd->cmnd[1] = (cmd->cmnd[1] & 0x1f) |
(cmd->device->lun << 5 & 0xe0);
}
......
......@@ -132,7 +132,9 @@ static struct {
{"CMD", "CRA-7280", NULL, BLIST_SPARSELUN}, /* CMD RAID Controller */
{"CNSI", "G7324", NULL, BLIST_SPARSELUN}, /* Chaparral G7324 RAID */
{"CNSi", "G8324", NULL, BLIST_SPARSELUN}, /* Chaparral G8324 RAID */
{"COMPAQ", "LOGICAL VOLUME", NULL, BLIST_FORCELUN},
{"COMPAQ", "ARRAY CONTROLLER", NULL, BLIST_SPARSELUN | BLIST_LARGELUN |
BLIST_MAX_512 | BLIST_REPORTLUN2}, /* Compaq RA4x00 */
{"COMPAQ", "LOGICAL VOLUME", NULL, BLIST_FORCELUN | BLIST_MAX_512}, /* Compaq RA4x00 */
{"COMPAQ", "CR3500", NULL, BLIST_FORCELUN},
{"COMPAQ", "MSA1000", NULL, BLIST_SPARSELUN | BLIST_NOSTARTONADD},
{"COMPAQ", "MSA1000 VOLUME", NULL, BLIST_SPARSELUN | BLIST_NOSTARTONADD},
......
......@@ -673,6 +673,7 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags)
case TYPE_MEDIUM_CHANGER:
case TYPE_ENCLOSURE:
case TYPE_COMM:
case TYPE_RAID:
case TYPE_RBC:
sdev->writeable = 1;
break;
......@@ -737,6 +738,13 @@ static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags)
if (*bflags & BLIST_SELECT_NO_ATN)
sdev->select_no_atn = 1;
/*
* Maximum 512 sector transfer length
* broken RA4x00 Compaq Disk Array
*/
if (*bflags & BLIST_MAX_512)
blk_queue_max_sectors(sdev->request_queue, 512);
/*
* Some devices may not want to have a start command automatically
* issued when a device is added.
......@@ -1123,10 +1131,13 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags,
* Also allow SCSI-2 if BLIST_REPORTLUN2 is set and host adapter does
* support more than 8 LUNs.
*/
if ((bflags & BLIST_NOREPORTLUN) ||
starget->scsi_level < SCSI_2 ||
(starget->scsi_level < SCSI_3 &&
(!(bflags & BLIST_REPORTLUN2) || shost->max_lun <= 8)) )
if (bflags & BLIST_NOREPORTLUN)
return 1;
if (starget->scsi_level < SCSI_2 &&
starget->scsi_level != SCSI_UNKNOWN)
return 1;
if (starget->scsi_level < SCSI_3 &&
(!(bflags & BLIST_REPORTLUN2) || shost->max_lun <= 8))
return 1;
if (bflags & BLIST_NOLUN)
return 0;
......
......@@ -28,4 +28,5 @@
#define BLIST_NO_ULD_ATTACH 0x100000 /* device is actually for RAID config */
#define BLIST_SELECT_NO_ATN 0x200000 /* select without ATN */
#define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */
#define BLIST_MAX_512 0x800000 /* maximum 512 sector cdb length */
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册