Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "This is mostly stuff which missed the first pull request because it
  needed to incubate longer.  It's mainly made up of the ncr 5380 rework
  but also has a few assorted bug fixes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (88 commits)
  imm: Use new parport device model
  megaraid: Fix possible NULL pointer deference in mraid_mm_ioctl
  storvsc: Fix typo in MODULE_PARM_DESC
  cxgbi: Typo in MODULE_PARM_DESC
  3w-xxxx: Pass through compat mode ioctls
  hisi_sas: Use u64 for qw0 in free_device_v1_hw()
  hisi_sas: Fix typo in setup_itct_v1_hw()
  hisi_sas: Fix v1 itct masks
  ipr: Fix out-of-bounds null overwrite
  scsi: add Synology to 1024 sector blacklist
  ncr5380: Add support for HP C2502
  ncr5380: Fix wait for 53C80 registers registers after PDMA
  ncr5380: Enable PDMA for DTC chips
  ncr5380: Enable PDMA for NCR53C400A
  ncr5380: Use runtime register mapping
  ncr5380: Fix pseudo DMA transfers on 53C400
  ncr5380: Cleanup whitespace and parentheses
  atari_NCR5380: Merge changes from NCR5380.c
  ncr5380: Merge changes from atari_NCR5380.c
  ncr5380: Fix whitespace in comments using regexp
  ...

drivers/scsi/3w-xxxx.c

@@ -1045,6 +1045,9 @@ static int tw_chrdev_open(struct inode *inode, struct file *file)
 static const struct file_operations tw_fops = {
 	.owner		= THIS_MODULE,
 	.unlocked_ioctl	= tw_chrdev_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl   = tw_chrdev_ioctl,
+#endif
 	.open		= tw_chrdev_open,
 	.release	= NULL,
 	.llseek		= noop_llseek,

drivers/scsi/Kconfig

@@ -1620,23 +1620,6 @@ config ATARI_SCSI
 	  ST-DMA, replacing ACSI).  It does NOT support other schemes, like
 	  in the Hades (without DMA).
 
-config ATARI_SCSI_TOSHIBA_DELAY
-	bool "Long delays for Toshiba CD-ROMs"
-	depends on ATARI_SCSI
-	help
-	  This option increases the delay after a SCSI arbitration to
-	  accommodate some flaky Toshiba CD-ROM drives. Say Y if you intend to
-	  use a Toshiba CD-ROM drive; otherwise, the option is not needed and
-	  would impact performance a bit, so say N.
-
-config ATARI_SCSI_RESET_BOOT
-	bool "Reset SCSI-devices at boottime"
-	depends on ATARI_SCSI
-	help
-	  Reset the devices on your Atari whenever it boots.  This makes the
-	  boot process fractionally longer but may assist recovery from errors
-	  that leave the devices with SCSI operations partway completed.
-
 config MAC_SCSI
 	tristate "Macintosh NCR5380 SCSI"
 	depends on MAC && SCSI=y

drivers/scsi/NCR5380.h

@@ -22,8 +22,13 @@
 #ifndef NCR5380_H
 #define NCR5380_H
 
+#include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/workqueue.h>
+#include <scsi/scsi_dbg.h>
 #include <scsi/scsi_eh.h>
+#include <scsi/scsi_transport_spi.h>
 
 #define NDEBUG_ARBITRATION	0x1
 #define NDEBUG_AUTOSENSE	0x2
@@ -158,8 +163,7 @@
 /* Write any value to this register to start an ini mode DMA receive */
 #define START_DMA_INITIATOR_RECEIVE_REG 7	/* wo */
 
-#define C400_CONTROL_STATUS_REG NCR53C400_register_offset-8	/* rw */
-
+/* NCR 53C400(A) Control Status Register bits: */
 #define CSR_RESET              0x80	/* wo  Resets 53c400 */
 #define CSR_53C80_REG          0x80	/* ro  5380 registers busy */
 #define CSR_TRANS_DIR          0x40	/* rw  Data transfer direction */
@@ -176,16 +180,6 @@
 #define CSR_BASE CSR_53C80_INTR
 #endif
 
-/* Number of 128-byte blocks to be transferred */
-#define C400_BLOCK_COUNTER_REG   NCR53C400_register_offset-7	/* rw */
-
-/* Resume transfer after disconnect */
-#define C400_RESUME_TRANSFER_REG NCR53C400_register_offset-6	/* wo */
-
-/* Access to host buffer stack */
-#define C400_HOST_BUFFER         NCR53C400_register_offset-4	/* rw */
-
-
 /* Note : PHASE_* macros are based on the values of the STATUS register */
 #define PHASE_MASK 	(SR_MSG | SR_CD | SR_IO)
 
@@ -205,16 +199,6 @@
 
 #define PHASE_SR_TO_TCR(phase) ((phase) >> 2)
 
-/*
- * The internal should_disconnect() function returns these based on the 
- * expected length of a disconnect if a device supports disconnect/
- * reconnect.
- */
-
-#define DISCONNECT_NONE		0
-#define DISCONNECT_TIME_TO_DATA	1
-#define DISCONNECT_LONG		2
-
 /* 
  * "Special" value for the (unsigned char) command tag, to indicate
  * I_T_L nexus instead of I_T_L_Q.
@@ -236,15 +220,11 @@
 #define NO_IRQ		0
 #endif
 
-#define FLAG_HAS_LAST_BYTE_SENT		1	/* NCR53c81 or better */
-#define FLAG_CHECK_LAST_BYTE_SENT	2	/* Only test once */
-#define FLAG_NCR53C400			4	/* NCR53c400 */
+#define FLAG_NO_DMA_FIXUP		1	/* No DMA errata workarounds */
 #define FLAG_NO_PSEUDO_DMA		8	/* Inhibit DMA */
-#define FLAG_DTC3181E			16	/* DTC3181E */
 #define FLAG_LATE_DMA_SETUP		32	/* Setup NCR before DMA H/W */
 #define FLAG_TAGGED_QUEUING		64	/* as X3T9.2 spelled it */
-
-#ifndef ASM
+#define FLAG_TOSHIBA_DELAY		128	/* Allow for borken CD-ROMs */
 
 #ifdef SUPPORT_TAGS
 struct tag_alloc {
@@ -258,33 +238,24 @@ struct NCR5380_hostdata {
 	NCR5380_implementation_fields;		/* implementation specific */
 	struct Scsi_Host *host;			/* Host backpointer */
 	unsigned char id_mask, id_higher_mask;	/* 1 << id, all bits greater */
-	unsigned char targets_present;		/* targets we have connected
-						   to, so we can call a select
-						   failure a retryable condition */
-	volatile unsigned char busy[8];		/* index = target, bit = lun */
+	unsigned char busy[8];			/* index = target, bit = lun */
 #if defined(REAL_DMA) || defined(REAL_DMA_POLL)
-	volatile int dma_len;			/* requested length of DMA */
+	int dma_len;				/* requested length of DMA */
 #endif
-	volatile unsigned char last_message;	/* last message OUT */
-	volatile struct scsi_cmnd *connected;	/* currently connected command */
-	volatile struct scsi_cmnd *issue_queue;	/* waiting to be issued */
-	volatile struct scsi_cmnd *disconnected_queue;	/* waiting for reconnect */
-	volatile int restart_select;		/* we have disconnected,
-						   used to restart 
-						   NCR5380_select() */
-	volatile unsigned aborted:1;		/* flag, says aborted */
+	unsigned char last_message;		/* last message OUT */
+	struct scsi_cmnd *connected;		/* currently connected cmnd */
+	struct scsi_cmnd *selecting;		/* cmnd to be connected */
+	struct list_head unissued;		/* waiting to be issued */
+	struct list_head autosense;		/* priority issue queue */
+	struct list_head disconnected;		/* waiting for reconnect */
+	spinlock_t lock;			/* protects this struct */
 	int flags;
-	unsigned long time_expires;		/* in jiffies, set prior to sleeping */
-	int select_time;			/* timer in select for target response */
-	volatile struct scsi_cmnd *selecting;
-	struct delayed_work coroutine;		/* our co-routine */
 	struct scsi_eh_save ses;
+	struct scsi_cmnd *sensing;
 	char info[256];
 	int read_overruns;                /* number of bytes to cut from a
 	                                   * transfer to handle chip overruns */
-	int retain_dma_intr;
 	struct work_struct main_task;
-	volatile int main_running;
 #ifdef SUPPORT_TAGS
 	struct tag_alloc TagAlloc[8][8];	/* 8 targets and 8 LUNs */
 #endif
@@ -292,10 +263,23 @@ struct NCR5380_hostdata {
 	unsigned spin_max_r;
 	unsigned spin_max_w;
 #endif
+	struct workqueue_struct *work_q;
+	unsigned long accesses_per_ms;	/* chip register accesses per ms */
 };
 
 #ifdef __KERNEL__
 
+struct NCR5380_cmd {
+	struct list_head list;
+};
+
+#define NCR5380_CMD_SIZE		(sizeof(struct NCR5380_cmd))
+
+static inline struct scsi_cmnd *NCR5380_to_scmd(struct NCR5380_cmd *ncmd_ptr)
+{
+	return ((struct scsi_cmnd *)ncmd_ptr) - 1;
+}
+
 #ifndef NDEBUG
 #define NDEBUG (0)
 #endif
@@ -304,6 +288,11 @@ struct NCR5380_hostdata {
 	do { if ((NDEBUG) & (flg)) \
 		printk(KERN_DEBUG fmt, ## __VA_ARGS__); } while (0)
 
+#define dsprintk(flg, host, fmt, ...) \
+	do { if ((NDEBUG) & (flg)) \
+		shost_printk(KERN_DEBUG, host, fmt, ## __VA_ARGS__); \
+	} while (0)
+
 #if NDEBUG
 #define NCR5380_dprint(flg, arg) \
 	do { if ((NDEBUG) & (flg)) NCR5380_print(arg); } while (0)
@@ -320,6 +309,7 @@ static void NCR5380_print(struct Scsi_Host *instance);
 static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
 #endif
 static int NCR5380_init(struct Scsi_Host *instance, int flags);
+static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
 static void NCR5380_exit(struct Scsi_Host *instance);
 static void NCR5380_information_transfer(struct Scsi_Host *instance);
 #ifndef DONT_USE_INTR
@@ -328,7 +318,7 @@ static irqreturn_t NCR5380_intr(int irq, void *dev_id);
 static void NCR5380_main(struct work_struct *work);
 static const char *NCR5380_info(struct Scsi_Host *instance);
 static void NCR5380_reselect(struct Scsi_Host *instance);
-static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd);
+static struct scsi_cmnd *NCR5380_select(struct Scsi_Host *, struct scsi_cmnd *);
 #if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL)
 static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
 #endif
@@ -443,5 +433,4 @@ static __inline__ int NCR5380_pc_dma_residual(struct Scsi_Host *instance)
 #endif				/* defined(i386) || defined(__alpha__) */
 #endif				/* defined(REAL_DMA)  */
 #endif				/* __KERNEL__ */
-#endif				/* ndef ASM */
 #endif				/* NCR5380_H */

drivers/scsi/arm/cumana_1.c

@@ -4,9 +4,7 @@
  * Copyright 1995-2002, Russell King
  */
 #include <linux/module.h>
-#include <linux/signal.h>
 #include <linux/ioport.h>
-#include <linux/delay.h>
 #include <linux/blkdev.h>
 #include <linux/init.h>
 
@@ -15,15 +13,14 @@
 
 #include <scsi/scsi_host.h>
 
-#include <scsi/scsicam.h>
-
 #define PSEUDO_DMA
 
 #define priv(host)			((struct NCR5380_hostdata *)(host)->hostdata)
-#define NCR5380_local_declare()		struct Scsi_Host *_instance
-#define NCR5380_setup(instance)		_instance = instance
-#define NCR5380_read(reg)		cumanascsi_read(_instance, reg)
-#define NCR5380_write(reg, value)	cumanascsi_write(_instance, reg, value)
+#define NCR5380_read(reg)		cumanascsi_read(instance, reg)
+#define NCR5380_write(reg, value)	cumanascsi_write(instance, reg, value)
+
+#define NCR5380_dma_xfer_len(instance, cmd, phase)	(cmd->transfersize)
+
 #define NCR5380_intr			cumanascsi_intr
 #define NCR5380_queue_command		cumanascsi_queue_command
 #define NCR5380_info			cumanascsi_info
@@ -211,6 +208,8 @@ static struct scsi_host_template cumanascsi_template = {
 	.cmd_per_lun		= 2,
 	.use_clustering		= DISABLE_CLUSTERING,
 	.proc_name		= "CumanaSCSI-1",
+	.cmd_size		= NCR5380_CMD_SIZE,
+	.max_sectors		= 128,
 };
 
 static int cumanascsi1_probe(struct expansion_card *ec,
@@ -240,23 +239,21 @@ static int cumanascsi1_probe(struct expansion_card *ec,
 
 	host->irq = ec->irq;
 
-	NCR5380_init(host, 0);
+	ret = NCR5380_init(host, 0);
+	if (ret)
+		goto out_unmap;
+
+	NCR5380_maybe_reset_bus(host);
 
         priv(host)->ctrl = 0;
         writeb(0, priv(host)->base + CTRL);
 
-	host->n_io_port = 255;
-	if (!(request_region(host->io_port, host->n_io_port, "CumanaSCSI-1"))) {
-		ret = -EBUSY;
-		goto out_unmap;
-	}
-
 	ret = request_irq(host->irq, cumanascsi_intr, 0,
 			  "CumanaSCSI-1", host);
 	if (ret) {
 		printk("scsi%d: IRQ%d not free: %d\n",
 		    host->host_no, host->irq, ret);
-		goto out_unmap;
+		goto out_exit;
 	}
 
 	ret = scsi_add_host(host, &ec->dev);
@@ -268,6 +265,8 @@ static int cumanascsi1_probe(struct expansion_card *ec,
 
  out_free_irq:
 	free_irq(host->irq, host);
+ out_exit:
+	NCR5380_exit(host);
  out_unmap:
 	iounmap(priv(host)->base);
 	iounmap(priv(host)->dma);

drivers/scsi/arm/oak.c

@@ -5,9 +5,7 @@
  */
 
 #include <linux/module.h>
-#include <linux/signal.h>
 #include <linux/ioport.h>
-#include <linux/delay.h>
 #include <linux/blkdev.h>
 #include <linux/init.h>
 
@@ -20,14 +18,16 @@
 #define DONT_USE_INTR
 
 #define priv(host)			((struct NCR5380_hostdata *)(host)->hostdata)
-#define NCR5380_local_declare()		void __iomem *_base
-#define NCR5380_setup(host)		_base = priv(host)->base
 
-#define NCR5380_read(reg)		readb(_base + ((reg) << 2))
-#define NCR5380_write(reg, value)	writeb(value, _base + ((reg) << 2))
+#define NCR5380_read(reg) \
+	readb(priv(instance)->base + ((reg) << 2))
+#define NCR5380_write(reg, value) \
+	writeb(value, priv(instance)->base + ((reg) << 2))
+
+#define NCR5380_dma_xfer_len(instance, cmd, phase)	(cmd->transfersize)
+
 #define NCR5380_queue_command		oakscsi_queue_command
 #define NCR5380_info			oakscsi_info
-#define NCR5380_show_info		oakscsi_show_info
 
 #define NCR5380_implementation_fields	\
 	void __iomem *base
@@ -103,7 +103,6 @@ printk("reading %p len %d\n", addr, len);
 
 static struct scsi_host_template oakscsi_template = {
 	.module			= THIS_MODULE,
-	.show_info		= oakscsi_show_info,
 	.name			= "Oak 16-bit SCSI",
 	.info			= oakscsi_info,
 	.queuecommand		= oakscsi_queue_command,
@@ -115,6 +114,8 @@ static struct scsi_host_template oakscsi_template = {
 	.cmd_per_lun		= 2,
 	.use_clustering		= DISABLE_CLUSTERING,
 	.proc_name		= "oakscsi",
+	.cmd_size		= NCR5380_CMD_SIZE,
+	.max_sectors		= 128,
 };
 
 static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
@@ -142,15 +143,21 @@ static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
 	host->irq = NO_IRQ;
 	host->n_io_port = 255;
 
-	NCR5380_init(host, 0);
+	ret = NCR5380_init(host, 0);
+	if (ret)
+		goto out_unmap;
+
+	NCR5380_maybe_reset_bus(host);
 
 	ret = scsi_add_host(host, &ec->dev);
 	if (ret)
-		goto out_unmap;
+		goto out_exit;
 
 	scsi_scan_host(host);
 	goto out;
 
+ out_exit:
+	NCR5380_exit(host);
  out_unmap:
 	iounmap(priv(host)->base);
  unreg:

drivers/scsi/atari_scsi.c

@@ -66,7 +66,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/delay.h>
 #include <linux/blkdev.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
@@ -98,7 +97,6 @@
 
 #define NCR5380_queue_command           atari_scsi_queue_command
 #define NCR5380_abort                   atari_scsi_abort
-#define NCR5380_show_info               atari_scsi_show_info
 #define NCR5380_info                    atari_scsi_info
 
 #define NCR5380_dma_read_setup(instance, data, count) \
@@ -161,23 +159,10 @@ static inline unsigned long SCSI_DMA_GETADR(void)
 	return adr;
 }
 
-#define HOSTDATA_DMALEN		(((struct NCR5380_hostdata *) \
-				(atari_scsi_host->hostdata))->dma_len)
-
-/* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms,
- * we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more
- * need ten times the standard value... */
-#ifndef CONFIG_ATARI_SCSI_TOSHIBA_DELAY
-#define	AFTER_RESET_DELAY	(HZ/2)
-#else
-#define	AFTER_RESET_DELAY	(5*HZ/2)
-#endif
-
 #ifdef REAL_DMA
 static void atari_scsi_fetch_restbytes(void);
 #endif
 
-static struct Scsi_Host *atari_scsi_host;
 static unsigned char (*atari_scsi_reg_read)(unsigned char reg);
 static void (*atari_scsi_reg_write)(unsigned char reg, unsigned char value);
 
@@ -208,12 +193,12 @@ static int setup_cmd_per_lun = -1;
 module_param(setup_cmd_per_lun, int, 0);
 static int setup_sg_tablesize = -1;
 module_param(setup_sg_tablesize, int, 0);
-#ifdef SUPPORT_TAGS
 static int setup_use_tagged_queuing = -1;
 module_param(setup_use_tagged_queuing, int, 0);
-#endif
 static int setup_hostid = -1;
 module_param(setup_hostid, int, 0);
+static int setup_toshiba_delay = -1;
+module_param(setup_toshiba_delay, int, 0);
 
 
 #if defined(REAL_DMA)
@@ -273,15 +258,17 @@ static void scsi_dma_buserr(int irq, void *dummy)
 #endif
 
 
-static irqreturn_t scsi_tt_intr(int irq, void *dummy)
+static irqreturn_t scsi_tt_intr(int irq, void *dev)
 {
 #ifdef REAL_DMA
+	struct Scsi_Host *instance = dev;
+	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	int dma_stat;
 
 	dma_stat = tt_scsi_dma.dma_ctrl;
 
-	dprintk(NDEBUG_INTR, "scsi%d: NCR5380 interrupt, DMA status = %02x\n",
-		   atari_scsi_host->host_no, dma_stat & 0xff);
+	dsprintk(NDEBUG_INTR, instance, "NCR5380 interrupt, DMA status = %02x\n",
+	         dma_stat & 0xff);
 
 	/* Look if it was the DMA that has interrupted: First possibility
 	 * is that a bus error occurred...
@@ -304,7 +291,8 @@ static irqreturn_t scsi_tt_intr(int irq, void *dummy)
 	 * data reg!
 	 */
 	if ((dma_stat & 0x02) && !(dma_stat & 0x40)) {
-		atari_dma_residual = HOSTDATA_DMALEN - (SCSI_DMA_READ_P(dma_addr) - atari_dma_startaddr);
+		atari_dma_residual = hostdata->dma_len -
+			(SCSI_DMA_READ_P(dma_addr) - atari_dma_startaddr);
 
 		dprintk(NDEBUG_DMA, "SCSI DMA: There are %ld residual bytes.\n",
 			   atari_dma_residual);
@@ -356,15 +344,17 @@ static irqreturn_t scsi_tt_intr(int irq, void *dummy)
 
 #endif /* REAL_DMA */
 
-	NCR5380_intr(irq, dummy);
+	NCR5380_intr(irq, dev);
 
 	return IRQ_HANDLED;
 }
 
 
-static irqreturn_t scsi_falcon_intr(int irq, void *dummy)
+static irqreturn_t scsi_falcon_intr(int irq, void *dev)
 {
 #ifdef REAL_DMA
+	struct Scsi_Host *instance = dev;
+	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	int dma_stat;
 
 	/* Turn off DMA and select sector counter register before
@@ -399,7 +389,7 @@ static irqreturn_t scsi_falcon_intr(int irq, void *dummy)
 			printk(KERN_ERR "SCSI DMA error: %ld bytes lost in "
 			       "ST-DMA fifo\n", transferred & 15);
 
-		atari_dma_residual = HOSTDATA_DMALEN - transferred;
+		atari_dma_residual = hostdata->dma_len - transferred;
 		dprintk(NDEBUG_DMA, "SCSI DMA: There are %ld residual bytes.\n",
 			   atari_dma_residual);
 	} else
@@ -411,13 +401,14 @@ static irqreturn_t scsi_falcon_intr(int irq, void *dummy)
 		 * data to the original destination address.
 		 */
 		memcpy(atari_dma_orig_addr, phys_to_virt(atari_dma_startaddr),
-		       HOSTDATA_DMALEN - atari_dma_residual);
+		       hostdata->dma_len - atari_dma_residual);
 		atari_dma_orig_addr = NULL;
 	}
 
 #endif /* REAL_DMA */
 
-	NCR5380_intr(irq, dummy);
+	NCR5380_intr(irq, dev);
+
 	return IRQ_HANDLED;
 }
 
@@ -488,7 +479,7 @@ static int __init atari_scsi_setup(char *str)
 	 * Defaults depend on TT or Falcon, determined at run time.
 	 * Negative values mean don't change.
 	 */
-	int ints[6];
+	int ints[8];
 
 	get_options(str, ARRAY_SIZE(ints), ints);
 
@@ -504,10 +495,11 @@ static int __init atari_scsi_setup(char *str)
 		setup_sg_tablesize = ints[3];
 	if (ints[0] >= 4)
 		setup_hostid = ints[4];
-#ifdef SUPPORT_TAGS
 	if (ints[0] >= 5)
 		setup_use_tagged_queuing = ints[5];
-#endif
+	/* ints[6] (use_pdma) is ignored */
+	if (ints[0] >= 7)
+		setup_toshiba_delay = ints[7];
 
 	return 1;
 }
@@ -516,38 +508,6 @@ __setup("atascsi=", atari_scsi_setup);
 #endif /* !MODULE */
 
 
-#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
-static void __init atari_scsi_reset_boot(void)
-{
-	unsigned long end;
-
-	/*
-	 * Do a SCSI reset to clean up the bus during initialization. No messing
-	 * with the queues, interrupts, or locks necessary here.
-	 */
-
-	printk("Atari SCSI: resetting the SCSI bus...");
-
-	/* get in phase */
-	NCR5380_write(TARGET_COMMAND_REG,
-		      PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG)));
-
-	/* assert RST */
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST);
-	/* The min. reset hold time is 25us, so 40us should be enough */
-	udelay(50);
-	/* reset RST and interrupt */
-	NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-	NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-
-	end = jiffies + AFTER_RESET_DELAY;
-	while (time_before(jiffies, end))
-		barrier();
-
-	printk(" done\n");
-}
-#endif
-
 #if defined(REAL_DMA)
 
 static unsigned long atari_scsi_dma_setup(struct Scsi_Host *instance,
@@ -815,14 +775,14 @@ static int atari_scsi_bus_reset(struct scsi_cmnd *cmd)
 static struct scsi_host_template atari_scsi_template = {
 	.module			= THIS_MODULE,
 	.proc_name		= DRV_MODULE_NAME,
-	.show_info		= atari_scsi_show_info,
 	.name			= "Atari native SCSI",
 	.info			= atari_scsi_info,
 	.queuecommand		= atari_scsi_queue_command,
 	.eh_abort_handler	= atari_scsi_abort,
 	.eh_bus_reset_handler	= atari_scsi_bus_reset,
 	.this_id		= 7,
-	.use_clustering		= DISABLE_CLUSTERING
+	.use_clustering		= DISABLE_CLUSTERING,
+	.cmd_size		= NCR5380_CMD_SIZE,
 };
 
 static int __init atari_scsi_probe(struct platform_device *pdev)
@@ -880,7 +840,7 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
 	} else {
 		/* Test if a host id is set in the NVRam */
 		if (ATARIHW_PRESENT(TT_CLK) && nvram_check_checksum()) {
-			unsigned char b = nvram_read_byte(14);
+			unsigned char b = nvram_read_byte(16);
 
 			/* Arbitration enabled? (for TOS)
 			 * If yes, use configured host ID
@@ -915,21 +875,18 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
 		error = -ENOMEM;
 		goto fail_alloc;
 	}
-	atari_scsi_host = instance;
-
-#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
-	atari_scsi_reset_boot();
-#endif
 
 	instance->irq = irq->start;
 
 	host_flags |= IS_A_TT() ? 0 : FLAG_LATE_DMA_SETUP;
-
 #ifdef SUPPORT_TAGS
 	host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
 #endif
+	host_flags |= setup_toshiba_delay > 0 ? FLAG_TOSHIBA_DELAY : 0;
 
-	NCR5380_init(instance, host_flags);
+	error = NCR5380_init(instance, host_flags);
+	if (error)
+		goto fail_init;
 
 	if (IS_A_TT()) {
 		error = request_irq(instance->irq, scsi_tt_intr, 0,
@@ -975,6 +932,8 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
 #endif
 	}
 
+	NCR5380_maybe_reset_bus(instance);
+
 	error = scsi_add_host(instance, NULL);
 	if (error)
 		goto fail_host;
@@ -989,6 +948,7 @@ static int __init atari_scsi_probe(struct platform_device *pdev)
 		free_irq(instance->irq, instance);
 fail_irq:
 	NCR5380_exit(instance);
+fail_init:
 	scsi_host_put(instance);
 fail_alloc:
 	if (atari_dma_buffer)

drivers/scsi/cxgbi/cxgb3i/cxgb3i.c

@@ -57,7 +57,7 @@ MODULE_PARM_DESC(cxgb3i_snd_win, "TCP send window in bytes (default=128KB)");
 
 static int cxgb3i_rx_credit_thres = 10 * 1024;
 module_param(cxgb3i_rx_credit_thres, int, 0644);
-MODULE_PARM_DESC(rx_credit_thres,
+MODULE_PARM_DESC(cxgb3i_rx_credit_thres,
 		 "RX credits return threshold in bytes (default=10KB)");
 
 static unsigned int cxgb3i_max_connect = 8 * 1024;

drivers/scsi/dmx3191d.c

@@ -36,17 +36,10 @@
 
 #define DONT_USE_INTR
 
-#define NCR5380_read(reg)		inb(port + reg)
-#define NCR5380_write(reg, value)	outb(value, port + reg)
+#define NCR5380_read(reg)		inb(instance->io_port + reg)
+#define NCR5380_write(reg, value)	outb(value, instance->io_port + reg)
 
 #define NCR5380_implementation_fields	/* none */
-#define NCR5380_local_declare()		unsigned int port
-#define NCR5380_setup(instance)		port = instance->io_port
-
-/*
- * Includes needed for NCR5380.[ch] (XXX: Move them to NCR5380.h)
- */
-#include <linux/delay.h>
 
 #include "NCR5380.h"
 #include "NCR5380.c"
@@ -56,6 +49,7 @@
 
 
 static struct scsi_host_template dmx3191d_driver_template = {
+	.module			= THIS_MODULE,
 	.proc_name		= DMX3191D_DRIVER_NAME,
 	.name			= "Domex DMX3191D",
 	.info			= NCR5380_info,
@@ -67,6 +61,8 @@ static struct scsi_host_template dmx3191d_driver_template = {
 	.sg_tablesize		= SG_ALL,
 	.cmd_per_lun		= 2,
 	.use_clustering		= DISABLE_CLUSTERING,
+	.cmd_size		= NCR5380_CMD_SIZE,
+	.max_sectors		= 128,
 };
 
 static int dmx3191d_probe_one(struct pci_dev *pdev,
@@ -97,17 +93,25 @@ static int dmx3191d_probe_one(struct pci_dev *pdev,
 	 */
 	shost->irq = NO_IRQ;
 
-	NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
+	error = NCR5380_init(shost, FLAG_NO_PSEUDO_DMA);
+	if (error)
+		goto out_host_put;
+
+	NCR5380_maybe_reset_bus(shost);
 
 	pci_set_drvdata(pdev, shost);
 
 	error = scsi_add_host(shost, &pdev->dev);
 	if (error)
-		goto out_release_region;
+		goto out_exit;
 
 	scsi_scan_host(shost);
 	return 0;
 
+out_exit:
+	NCR5380_exit(shost);
+out_host_put:
+	scsi_host_put(shost);
  out_release_region:
 	release_region(io, DMX3191D_REGION_LEN);
  out_disable_device:
@@ -119,15 +123,14 @@ static int dmx3191d_probe_one(struct pci_dev *pdev,
 static void dmx3191d_remove_one(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
+	unsigned long io = shost->io_port;
 
 	scsi_remove_host(shost);
 
 	NCR5380_exit(shost);
-
-	release_region(shost->io_port, DMX3191D_REGION_LEN);
-	pci_disable_device(pdev);
-
 	scsi_host_put(shost);
+	release_region(io, DMX3191D_REGION_LEN);
+	pci_disable_device(pdev);
 }
 
 static struct pci_device_id dmx3191d_pci_tbl[] = {

drivers/scsi/dtc.c

-
 #define PSEUDO_DMA
 #define DONT_USE_INTR
-#define UNSAFE			/* Leave interrupts enabled during pseudo-dma I/O */
-#define DMA_WORKS_RIGHT
-
 
 /*
  * DTC 3180/3280 driver, by
@@ -50,15 +46,13 @@
 
 
 #include <linux/module.h>
-#include <linux/signal.h>
 #include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/stat.h>
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <scsi/scsi_host.h>
+
 #include "dtc.h"
 #define AUTOPROBE_IRQ
 #include "NCR5380.h"
@@ -150,7 +144,7 @@ static const struct signature {
 
 static int __init dtc_setup(char *str)
 {
-	static int commandline_current = 0;
+	static int commandline_current;
 	int i;
 	int ints[10];
 
@@ -188,7 +182,7 @@ __setup("dtc=", dtc_setup);
 
 static int __init dtc_detect(struct scsi_host_template * tpnt)
 {
-	static int current_override = 0, current_base = 0;
+	static int current_override, current_base;
 	struct Scsi_Host *instance;
 	unsigned int addr;
 	void __iomem *base;
@@ -205,9 +199,8 @@ static int __init dtc_detect(struct scsi_host_template * tpnt)
 				addr = 0;
 		} else
 			for (; !addr && (current_base < NO_BASES); ++current_base) {
-#if (DTCDEBUG & DTCDEBUG_INIT)
-				printk(KERN_DEBUG "scsi-dtc : probing address %08x\n", bases[current_base].address);
-#endif
+				dprintk(NDEBUG_INIT, "dtc: probing address 0x%08x\n",
+				        (unsigned int)bases[current_base].address);
 				if (bases[current_base].noauto)
 					continue;
 				base = ioremap(bases[current_base].address, 0x2000);
@@ -216,18 +209,14 @@ static int __init dtc_detect(struct scsi_host_template * tpnt)
 				for (sig = 0; sig < NO_SIGNATURES; ++sig) {
 					if (check_signature(base + signatures[sig].offset, signatures[sig].string, strlen(signatures[sig].string))) {
 						addr = bases[current_base].address;
-#if (DTCDEBUG & DTCDEBUG_INIT)
-						printk(KERN_DEBUG "scsi-dtc : detected board.\n");
-#endif
+						dprintk(NDEBUG_INIT, "dtc: detected board\n");
 						goto found;
 					}
 				}
 				iounmap(base);
 			}
 
-#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT)
-		printk(KERN_DEBUG "scsi-dtc : base = %08x\n", addr);
-#endif
+		dprintk(NDEBUG_INIT, "dtc: addr = 0x%08x\n", addr);
 
 		if (!addr)
 			break;
@@ -235,12 +224,15 @@ static int __init dtc_detect(struct scsi_host_template * tpnt)
 found:
 		instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
 		if (instance == NULL)
-			break;
+			goto out_unmap;
 
 		instance->base = addr;
 		((struct NCR5380_hostdata *)(instance)->hostdata)->base = base;
 
-		NCR5380_init(instance, 0);
+		if (NCR5380_init(instance, FLAG_NO_DMA_FIXUP))
+			goto out_unregister;
+
+		NCR5380_maybe_reset_bus(instance);
 
 		NCR5380_write(DTC_CONTROL_REG, CSR_5380_INTR);	/* Enable int's */
 		if (overrides[current_override].irq != IRQ_AUTO)
@@ -271,14 +263,19 @@ static int __init dtc_detect(struct scsi_host_template * tpnt)
 			printk(KERN_WARNING "scsi%d : interrupts not used. Might as well not jumper it.\n", instance->host_no);
 		instance->irq = NO_IRQ;
 #endif
-#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT)
-		printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
-#endif
+		dprintk(NDEBUG_INIT, "scsi%d : irq = %d\n",
+		        instance->host_no, instance->irq);
 
 		++current_override;
 		++count;
 	}
 	return count;
+
+out_unregister:
+	scsi_unregister(instance);
+out_unmap:
+	iounmap(base);
+	return count;
 }
 
 /*
@@ -331,12 +328,8 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
 	unsigned char *d = dst;
 	int i;			/* For counting time spent in the poll-loop */
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	NCR5380_local_declare();
-	NCR5380_setup(instance);
 
 	i = 0;
-	NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-	NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
 	if (instance->irq == NO_IRQ)
 		NCR5380_write(DTC_CONTROL_REG, CSR_DIR_READ);
 	else
@@ -348,7 +341,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
 		while (NCR5380_read(DTC_CONTROL_REG) & CSR_HOST_BUF_NOT_RDY)
 			++i;
 		rtrc(3);
-		memcpy_fromio(d, base + DTC_DATA_BUF, 128);
+		memcpy_fromio(d, hostdata->base + DTC_DATA_BUF, 128);
 		d += 128;
 		len -= 128;
 		rtrc(7);
@@ -358,9 +351,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
 	rtrc(4);
 	while (!(NCR5380_read(DTC_CONTROL_REG) & D_CR_ACCESS))
 		++i;
-	NCR5380_write(MODE_REG, 0);	/* Clear the operating mode */
 	rtrc(0);
-	NCR5380_read(RESET_PARITY_INTERRUPT_REG);
 	if (i > hostdata->spin_max_r)
 		hostdata->spin_max_r = i;
 	return (0);
@@ -383,12 +374,7 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
 {
 	int i;
 	struct NCR5380_hostdata *hostdata = shost_priv(instance);
-	NCR5380_local_declare();
-	NCR5380_setup(instance);
 
-	NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-	NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
-	/* set direction (write) */
 	if (instance->irq == NO_IRQ)
 		NCR5380_write(DTC_CONTROL_REG, 0);
 	else
@@ -400,7 +386,7 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
 		while (NCR5380_read(DTC_CONTROL_REG) & CSR_HOST_BUF_NOT_RDY)
 			++i;
 		rtrc(3);
-		memcpy_toio(base + DTC_DATA_BUF, src, 128);
+		memcpy_toio(hostdata->base + DTC_DATA_BUF, src, 128);
 		src += 128;
 		len -= 128;
 	}
@@ -413,33 +399,44 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
 		++i;
 	rtrc(7);
 	/* Check for parity error here. fixme. */
-	NCR5380_write(MODE_REG, 0);	/* Clear the operating mode */
 	rtrc(0);
 	if (i > hostdata->spin_max_w)
 		hostdata->spin_max_w = i;
 	return (0);
 }
 
+static int dtc_dma_xfer_len(struct scsi_cmnd *cmd)
+{
+	int transfersize = cmd->transfersize;
+
+	/* Limit transfers to 32K, for xx400 & xx406
+	 * pseudoDMA that transfers in 128 bytes blocks.
+	 */
+	if (transfersize > 32 * 1024 && cmd->SCp.this_residual &&
+	    !(cmd->SCp.this_residual % transfersize))
+		transfersize = 32 * 1024;
+
+	return transfersize;
+}
+
 MODULE_LICENSE("GPL");
 
 #include "NCR5380.c"
 
 static int dtc_release(struct Scsi_Host *shost)
 {
-	NCR5380_local_declare();
-	NCR5380_setup(shost);
+	struct NCR5380_hostdata *hostdata = shost_priv(shost);
+
 	if (shost->irq != NO_IRQ)
 		free_irq(shost->irq, shost);
 	NCR5380_exit(shost);
-	if (shost->io_port && shost->n_io_port)
-		release_region(shost->io_port, shost->n_io_port);
 	scsi_unregister(shost);
-	iounmap(base);
+	iounmap(hostdata->base);
 	return 0;
 }
 
 static struct scsi_host_template driver_template = {
-	.name				= "DTC 3180/3280 ",
+	.name			= "DTC 3180/3280",
 	.detect			= dtc_detect,
 	.release		= dtc_release,
 	.proc_name		= "dtc3x80",
@@ -450,10 +447,12 @@ static struct scsi_host_template driver_template = {
 	.eh_abort_handler	= dtc_abort,
 	.eh_bus_reset_handler	= dtc_bus_reset,
 	.bios_param		= dtc_biosparam,
-	.can_queue      		= CAN_QUEUE,
+	.can_queue		= 32,
 	.this_id		= 7,
 	.sg_tablesize		= SG_ALL,
-	.cmd_per_lun    		= CMD_PER_LUN,
+	.cmd_per_lun		= 2,
 	.use_clustering		= DISABLE_CLUSTERING,
+	.cmd_size		= NCR5380_CMD_SIZE,
+	.max_sectors		= 128,
 };
 #include "scsi_module.c"

drivers/scsi/dtc.h

@@ -10,54 +10,17 @@
 #ifndef DTC3280_H
 #define DTC3280_H
 
-#define DTCDEBUG 0
-#define DTCDEBUG_INIT	0x1
-#define DTCDEBUG_TRANSFER 0x2
-
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 2
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 32 
-#endif
-
 #define NCR5380_implementation_fields \
     void __iomem *base
 
-#define NCR5380_local_declare() \
-    void __iomem *base
-
-#define NCR5380_setup(instance) \
-    base = ((struct NCR5380_hostdata *)(instance)->hostdata)->base
+#define DTC_address(reg) \
+	(((struct NCR5380_hostdata *)shost_priv(instance))->base + DTC_5380_OFFSET + reg)
 
-#define DTC_address(reg) (base + DTC_5380_OFFSET + reg)
-
-#define dbNCR5380_read(reg)                                              \
-    (rval=readb(DTC_address(reg)), \
-     (((unsigned char) printk("DTC : read register %d at addr %p is: %02x\n"\
-    , (reg), DTC_address(reg), rval)), rval ) )
-
-#define dbNCR5380_write(reg, value) do {                                  \
-    printk("DTC : write %02x to register %d at address %p\n",         \
-            (value), (reg), DTC_address(reg));     \
-    writeb(value, DTC_address(reg));} while(0)
-
-
-#if !(DTCDEBUG & DTCDEBUG_TRANSFER) 
 #define NCR5380_read(reg) (readb(DTC_address(reg)))
 #define NCR5380_write(reg, value) (writeb(value, DTC_address(reg)))
-#else
-#define NCR5380_read(reg) (readb(DTC_address(reg)))
-#define xNCR5380_read(reg)						\
-    (((unsigned char) printk("DTC : read register %d at address %p\n"\
-    , (reg), DTC_address(reg))), readb(DTC_address(reg)))
 
-#define NCR5380_write(reg, value) do {					\
-    printk("DTC : write %02x to register %d at address %p\n", 	\
-	    (value), (reg), DTC_address(reg));	\
-    writeb(value, DTC_address(reg));} while(0)
-#endif
+#define NCR5380_dma_xfer_len(instance, cmd, phase) \
+        dtc_dma_xfer_len(cmd)
 
 #define NCR5380_intr			dtc_intr
 #define NCR5380_queue_command		dtc_queue_command

drivers/scsi/g_NCR5380.c

@@ -56,40 +56,31 @@
  *     
  */
 
-/* settings for DTC3181E card with only Mustek scanner attached */
-#define USLEEP_POLL	msecs_to_jiffies(10)
-#define USLEEP_SLEEP	msecs_to_jiffies(200)
-#define USLEEP_WAITLONG	msecs_to_jiffies(5000)
-
 #define AUTOPROBE_IRQ
 
 #ifdef CONFIG_SCSI_GENERIC_NCR53C400
-#define NCR53C400_PSEUDO_DMA 1
 #define PSEUDO_DMA
-#define NCR53C400
 #endif
 
 #include <asm/io.h>
-#include <linux/signal.h>
 #include <linux/blkdev.h>
+#include <linux/module.h>
 #include <scsi/scsi_host.h>
 #include "g_NCR5380.h"
 #include "NCR5380.h"
-#include <linux/stat.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/isapnp.h>
-#include <linux/delay.h>
 #include <linux/interrupt.h>
 
-#define NCR_NOT_SET 0
-static int ncr_irq = NCR_NOT_SET;
-static int ncr_dma = NCR_NOT_SET;
-static int ncr_addr = NCR_NOT_SET;
-static int ncr_5380 = NCR_NOT_SET;
-static int ncr_53c400 = NCR_NOT_SET;
-static int ncr_53c400a = NCR_NOT_SET;
-static int dtc_3181e = NCR_NOT_SET;
+static int ncr_irq;
+static int ncr_dma;
+static int ncr_addr;
+static int ncr_5380;
+static int ncr_53c400;
+static int ncr_53c400a;
+static int dtc_3181e;
+static int hp_c2502;
 
 static struct override {
 	NCR5380_map_type NCR5380_map_name;
@@ -121,7 +112,7 @@ static struct override {
 
 static void __init internal_setup(int board, char *str, int *ints)
 {
-	static int commandline_current = 0;
+	static int commandline_current;
 	switch (board) {
 	case BOARD_NCR5380:
 		if (ints[0] != 2 && ints[0] != 3) {
@@ -235,6 +226,30 @@ static int __init do_DTC3181E_setup(char *str)
 
 #endif
 
+#ifndef SCSI_G_NCR5380_MEM
+/*
+ * Configure I/O address of 53C400A or DTC436 by writing magic numbers
+ * to ports 0x779 and 0x379.
+ */
+static void magic_configure(int idx, u8 irq, u8 magic[])
+{
+	u8 cfg = 0;
+
+	outb(magic[0], 0x779);
+	outb(magic[1], 0x379);
+	outb(magic[2], 0x379);
+	outb(magic[3], 0x379);
+	outb(magic[4], 0x379);
+
+	/* allowed IRQs for HP C2502 */
+	if (irq != 2 && irq != 3 && irq != 4 && irq != 5 && irq != 7)
+		irq = 0;
+	if (idx >= 0 && idx <= 7)
+		cfg = 0x80 | idx | (irq << 4);
+	outb(cfg, 0x379);
+}
+#endif
+
 /**
  * 	generic_NCR5380_detect	-	look for NCR5380 controllers
  *	@tpnt: the scsi template
@@ -243,19 +258,18 @@ static int __init do_DTC3181E_setup(char *str)
  *	and DTC436(ISAPnP) controllers. If overrides have been set we use
  *	them.
  *
- *	The caller supplied NCR5380_init function is invoked from here, before
- *	the interrupt line is taken.
- *
  *	Locks: none
  */
 
 static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 {
-	static int current_override = 0;
+	static int current_override;
 	int count;
 	unsigned int *ports;
+	u8 *magic = NULL;
 #ifndef SCSI_G_NCR5380_MEM
 	int i;
+	int port_idx = -1;
 	unsigned long region_size = 16;
 #endif
 	static unsigned int __initdata ncr_53c400a_ports[] = {
@@ -264,27 +278,36 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 	static unsigned int __initdata dtc_3181e_ports[] = {
 		0x220, 0x240, 0x280, 0x2a0, 0x2c0, 0x300, 0x320, 0x340, 0
 	};
-	int flags = 0;
+	static u8 ncr_53c400a_magic[] __initdata = {	/* 53C400A & DTC436 */
+		0x59, 0xb9, 0xc5, 0xae, 0xa6
+	};
+	static u8 hp_c2502_magic[] __initdata = {	/* HP C2502 */
+		0x0f, 0x22, 0xf0, 0x20, 0x80
+	};
+	int flags;
 	struct Scsi_Host *instance;
+	struct NCR5380_hostdata *hostdata;
 #ifdef SCSI_G_NCR5380_MEM
 	unsigned long base;
 	void __iomem *iomem;
 #endif
 
-	if (ncr_irq != NCR_NOT_SET)
+	if (ncr_irq)
 		overrides[0].irq = ncr_irq;
-	if (ncr_dma != NCR_NOT_SET)
+	if (ncr_dma)
 		overrides[0].dma = ncr_dma;
-	if (ncr_addr != NCR_NOT_SET)
+	if (ncr_addr)
 		overrides[0].NCR5380_map_name = (NCR5380_map_type) ncr_addr;
-	if (ncr_5380 != NCR_NOT_SET)
+	if (ncr_5380)
 		overrides[0].board = BOARD_NCR5380;
-	else if (ncr_53c400 != NCR_NOT_SET)
+	else if (ncr_53c400)
 		overrides[0].board = BOARD_NCR53C400;
-	else if (ncr_53c400a != NCR_NOT_SET)
+	else if (ncr_53c400a)
 		overrides[0].board = BOARD_NCR53C400A;
-	else if (dtc_3181e != NCR_NOT_SET)
+	else if (dtc_3181e)
 		overrides[0].board = BOARD_DTC3181E;
+	else if (hp_c2502)
+		overrides[0].board = BOARD_HP_C2502;
 #ifndef SCSI_G_NCR5380_MEM
 	if (!current_override && isapnp_present()) {
 		struct pnp_dev *dev = NULL;
@@ -318,41 +341,45 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 		}
 	}
 #endif
-	tpnt->proc_name = "g_NCR5380";
 
 	for (count = 0; current_override < NO_OVERRIDES; ++current_override) {
 		if (!(overrides[current_override].NCR5380_map_name))
 			continue;
 
 		ports = NULL;
+		flags = 0;
 		switch (overrides[current_override].board) {
 		case BOARD_NCR5380:
 			flags = FLAG_NO_PSEUDO_DMA;
 			break;
 		case BOARD_NCR53C400:
-			flags = FLAG_NCR53C400;
+#ifdef PSEUDO_DMA
+			flags = FLAG_NO_DMA_FIXUP;
+#endif
 			break;
 		case BOARD_NCR53C400A:
-			flags = FLAG_NO_PSEUDO_DMA;
+			flags = FLAG_NO_DMA_FIXUP;
 			ports = ncr_53c400a_ports;
+			magic = ncr_53c400a_magic;
+			break;
+		case BOARD_HP_C2502:
+			flags = FLAG_NO_DMA_FIXUP;
+			ports = ncr_53c400a_ports;
+			magic = hp_c2502_magic;
 			break;
 		case BOARD_DTC3181E:
-			flags = FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E;
+			flags = FLAG_NO_DMA_FIXUP;
 			ports = dtc_3181e_ports;
+			magic = ncr_53c400a_magic;
 			break;
 		}
 
 #ifndef SCSI_G_NCR5380_MEM
-		if (ports) {
+		if (ports && magic) {
 			/* wakeup sequence for the NCR53C400A and DTC3181E */
 
 			/* Disable the adapter and look for a free io port */
-			outb(0x59, 0x779);
-			outb(0xb9, 0x379);
-			outb(0xc5, 0x379);
-			outb(0xae, 0x379);
-			outb(0xa6, 0x379);
-			outb(0x00, 0x379);
+			magic_configure(-1, 0, magic);
 
 			if (overrides[current_override].NCR5380_map_name != PORT_AUTO)
 				for (i = 0; ports[i]; i++) {
@@ -371,17 +398,12 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 				}
 			if (ports[i]) {
 				/* At this point we have our region reserved */
-				outb(0x59, 0x779);
-				outb(0xb9, 0x379);
-				outb(0xc5, 0x379);
-				outb(0xae, 0x379);
-				outb(0xa6, 0x379);
-				outb(0x80 | i, 0x379);	/* set io port to be used */
+				magic_configure(i, 0, magic); /* no IRQ yet */
 				outb(0xc0, ports[i] + 9);
 				if (inb(ports[i] + 9) != 0x80)
 					continue;
-				else
 				overrides[current_override].NCR5380_map_name = ports[i];
+				port_idx = i;
 			} else
 				continue;
 		}
@@ -403,24 +425,65 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 		}
 #endif
 		instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
-		if (instance == NULL) {
-#ifndef SCSI_G_NCR5380_MEM
-			release_region(overrides[current_override].NCR5380_map_name, region_size);
-#else
-			iounmap(iomem);
-			release_mem_region(base, NCR5380_region_size);
-#endif
-			continue;
-		}
+		if (instance == NULL)
+			goto out_release;
+		hostdata = shost_priv(instance);
 
-		instance->NCR5380_instance_name = overrides[current_override].NCR5380_map_name;
 #ifndef SCSI_G_NCR5380_MEM
+		instance->io_port = overrides[current_override].NCR5380_map_name;
 		instance->n_io_port = region_size;
+		hostdata->io_width = 1; /* 8-bit PDMA by default */
+
+		/*
+		 * On NCR53C400 boards, NCR5380 registers are mapped 8 past
+		 * the base address.
+		 */
+		switch (overrides[current_override].board) {
+		case BOARD_NCR53C400:
+			instance->io_port += 8;
+			hostdata->c400_ctl_status = 0;
+			hostdata->c400_blk_cnt = 1;
+			hostdata->c400_host_buf = 4;
+			break;
+		case BOARD_DTC3181E:
+			hostdata->io_width = 2;	/* 16-bit PDMA */
+			/* fall through */
+		case BOARD_NCR53C400A:
+		case BOARD_HP_C2502:
+			hostdata->c400_ctl_status = 9;
+			hostdata->c400_blk_cnt = 10;
+			hostdata->c400_host_buf = 8;
+			break;
+		}
 #else
-		((struct NCR5380_hostdata *)instance->hostdata)->iomem = iomem;
+		instance->base = overrides[current_override].NCR5380_map_name;
+		hostdata->iomem = iomem;
+		switch (overrides[current_override].board) {
+		case BOARD_NCR53C400:
+			hostdata->c400_ctl_status = 0x100;
+			hostdata->c400_blk_cnt = 0x101;
+			hostdata->c400_host_buf = 0x104;
+			break;
+		case BOARD_DTC3181E:
+		case BOARD_NCR53C400A:
+		case BOARD_HP_C2502:
+			pr_err(DRV_MODULE_NAME ": unknown register offsets\n");
+			goto out_unregister;
+		}
 #endif
 
-		NCR5380_init(instance, flags);
+		if (NCR5380_init(instance, flags))
+			goto out_unregister;
+
+		switch (overrides[current_override].board) {
+		case BOARD_NCR53C400:
+		case BOARD_DTC3181E:
+		case BOARD_NCR53C400A:
+		case BOARD_HP_C2502:
+			NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
+		}
+
+		NCR5380_maybe_reset_bus(instance);
 
 		if (overrides[current_override].irq != IRQ_AUTO)
 			instance->irq = overrides[current_override].irq;
@@ -431,12 +494,18 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 		if (instance->irq == 255)
 			instance->irq = NO_IRQ;
 
-		if (instance->irq != NO_IRQ)
+		if (instance->irq != NO_IRQ) {
+#ifndef SCSI_G_NCR5380_MEM
+			/* set IRQ for HP C2502 */
+			if (overrides[current_override].board == BOARD_HP_C2502)
+				magic_configure(port_idx, instance->irq, magic);
+#endif
 			if (request_irq(instance->irq, generic_NCR5380_intr,
 					0, "NCR5380", instance)) {
 				printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
 				instance->irq = NO_IRQ;
 			}
+		}
 
 		if (instance->irq == NO_IRQ) {
 			printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
@@ -447,6 +516,17 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
 		++count;
 	}
 	return count;
+
+out_unregister:
+	scsi_unregister(instance);
+out_release:
+#ifndef SCSI_G_NCR5380_MEM
+	release_region(overrides[current_override].NCR5380_map_name, region_size);
+#else
+	iounmap(iomem);
+	release_mem_region(base, NCR5380_region_size);
+#endif
+	return count;
 }
 
 /**
@@ -460,21 +540,15 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
  
 static int generic_NCR5380_release_resources(struct Scsi_Host *instance)
 {
-	NCR5380_local_declare();
-	NCR5380_setup(instance);
-	
 	if (instance->irq != NO_IRQ)
 		free_irq(instance->irq, instance);
 	NCR5380_exit(instance);
-
 #ifndef SCSI_G_NCR5380_MEM
-	release_region(instance->NCR5380_instance_name, instance->n_io_port);
+	release_region(instance->io_port, instance->n_io_port);
 #else
 	iounmap(((struct NCR5380_hostdata *)instance->hostdata)->iomem);
-	release_mem_region(instance->NCR5380_instance_name, NCR5380_region_size);
+	release_mem_region(instance->base, NCR5380_region_size);
 #endif
-
-
 	return 0;
 }
 
@@ -507,7 +581,7 @@ generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev,
 }
 #endif
 
-#ifdef NCR53C400_PSEUDO_DMA
+#ifdef PSEUDO_DMA
 
 /**
  *	NCR5380_pread		-	pseudo DMA read
@@ -521,75 +595,68 @@ generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev,
  
 static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
 {
+	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	int blocks = len / 128;
 	int start = 0;
-	int bl;
 
-	NCR5380_local_declare();
-	NCR5380_setup(instance);
-
-	NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE | CSR_TRANS_DIR);
-	NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
+	NCR5380_write(hostdata->c400_ctl_status, CSR_BASE | CSR_TRANS_DIR);
+	NCR5380_write(hostdata->c400_blk_cnt, blocks);
 	while (1) {
-		if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
+		if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
 			break;
-		}
-		if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
+		if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
 			printk(KERN_ERR "53C400r: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
 			return -1;
 		}
-		while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY);
+		while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
+			; /* FIXME - no timeout */
 
 #ifndef SCSI_G_NCR5380_MEM
-		{
-			int i;
-			for (i = 0; i < 128; i++)
-				dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
-		}
+		if (hostdata->io_width == 2)
+			insw(instance->io_port + hostdata->c400_host_buf,
+							dst + start, 64);
+		else
+			insb(instance->io_port + hostdata->c400_host_buf,
+							dst + start, 128);
 #else
 		/* implies SCSI_G_NCR5380_MEM */
-		memcpy_fromio(dst + start, iomem + NCR53C400_host_buffer, 128);
+		memcpy_fromio(dst + start,
+		              hostdata->iomem + NCR53C400_host_buffer, 128);
 #endif
 		start += 128;
 		blocks--;
 	}
 
 	if (blocks) {
-		while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
-		{
-			// FIXME - no timeout
-		}
+		while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
+			; /* FIXME - no timeout */
 
 #ifndef SCSI_G_NCR5380_MEM
-		{
-			int i;	
-			for (i = 0; i < 128; i++)
-				dst[start + i] = NCR5380_read(C400_HOST_BUFFER);
-		}
+		if (hostdata->io_width == 2)
+			insw(instance->io_port + hostdata->c400_host_buf,
+							dst + start, 64);
+		else
+			insb(instance->io_port + hostdata->c400_host_buf,
+							dst + start, 128);
 #else
 		/* implies SCSI_G_NCR5380_MEM */
-		memcpy_fromio(dst + start, iomem + NCR53C400_host_buffer, 128);
+		memcpy_fromio(dst + start,
+		              hostdata->iomem + NCR53C400_host_buffer, 128);
 #endif
 		start += 128;
 		blocks--;
 	}
 
-	if (!(NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
+	if (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ))
 		printk("53C400r: no 53C80 gated irq after transfer");
 
-#if 0
-	/*
-	 *	DON'T DO THIS - THEY NEVER ARRIVE!
-	 */
-	printk("53C400r: Waiting for 53C80 registers\n");
-	while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG)
+	/* wait for 53C80 registers to be available */
+	while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG))
 		;
-#endif
+
 	if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER))
 		printk(KERN_ERR "53C400r: no end dma signal\n");
 		
-	NCR5380_write(MODE_REG, MR_BASE);
-	NCR5380_read(RESET_PARITY_INTERRUPT_REG);
 	return 0;
 }
 
@@ -605,88 +672,90 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
 
 static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
 {
+	struct NCR5380_hostdata *hostdata = shost_priv(instance);
 	int blocks = len / 128;
 	int start = 0;
-	int bl;
-	int i;
-
-	NCR5380_local_declare();
-	NCR5380_setup(instance);
 
-	NCR5380_write(C400_CONTROL_STATUS_REG, CSR_BASE);
-	NCR5380_write(C400_BLOCK_COUNTER_REG, blocks);
+	NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
+	NCR5380_write(hostdata->c400_blk_cnt, blocks);
 	while (1) {
-		if (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ) {
+		if (NCR5380_read(hostdata->c400_ctl_status) & CSR_GATED_53C80_IRQ) {
 			printk(KERN_ERR "53C400w: Got 53C80_IRQ start=%d, blocks=%d\n", start, blocks);
 			return -1;
 		}
 
-		if ((bl = NCR5380_read(C400_BLOCK_COUNTER_REG)) == 0) {
+		if (NCR5380_read(hostdata->c400_blk_cnt) == 0)
 			break;
-		}
-		while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
+		while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
 			; // FIXME - timeout
 #ifndef SCSI_G_NCR5380_MEM
-		{
-			for (i = 0; i < 128; i++)
-				NCR5380_write(C400_HOST_BUFFER, src[start + i]);
-		}
+		if (hostdata->io_width == 2)
+			outsw(instance->io_port + hostdata->c400_host_buf,
+							src + start, 64);
+		else
+			outsb(instance->io_port + hostdata->c400_host_buf,
+							src + start, 128);
 #else
 		/* implies SCSI_G_NCR5380_MEM */
-		memcpy_toio(iomem + NCR53C400_host_buffer, src + start, 128);
+		memcpy_toio(hostdata->iomem + NCR53C400_host_buffer,
+		            src + start, 128);
 #endif
 		start += 128;
 		blocks--;
 	}
 	if (blocks) {
-		while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_HOST_BUF_NOT_RDY)
+		while (NCR5380_read(hostdata->c400_ctl_status) & CSR_HOST_BUF_NOT_RDY)
 			; // FIXME - no timeout
 
 #ifndef SCSI_G_NCR5380_MEM
-		{
-			for (i = 0; i < 128; i++)
-				NCR5380_write(C400_HOST_BUFFER, src[start + i]);
-		}
+		if (hostdata->io_width == 2)
+			outsw(instance->io_port + hostdata->c400_host_buf,
+							src + start, 64);
+		else
+			outsb(instance->io_port + hostdata->c400_host_buf,
+							src + start, 128);
 #else
 		/* implies SCSI_G_NCR5380_MEM */
-		memcpy_toio(iomem + NCR53C400_host_buffer, src + start, 128);
+		memcpy_toio(hostdata->iomem + NCR53C400_host_buffer,
+		            src + start, 128);
 #endif
 		start += 128;
 		blocks--;
 	}
 
-#if 0
-	printk("53C400w: waiting for registers to be available\n");
-	THEY NEVER DO ! while (NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_53C80_REG);
-	printk("53C400w: Got em\n");
-#endif
-
-	/* Let's wait for this instead - could be ugly */
-	/* All documentation says to check for this. Maybe my hardware is too
-	 * fast. Waiting for it seems to work fine! KLL
-	 */
-	while (!(i = NCR5380_read(C400_CONTROL_STATUS_REG) & CSR_GATED_53C80_IRQ))
-		;	// FIXME - no timeout
-
-	/*
-	 * I know. i is certainly != 0 here but the loop is new. See previous
-	 * comment.
-	 */
-	if (i) {
-		if (!((i = NCR5380_read(BUS_AND_STATUS_REG)) & BASR_END_DMA_TRANSFER))
-			printk(KERN_ERR "53C400w: No END OF DMA bit - WHOOPS! BASR=%0x\n", i);
-	} else
-		printk(KERN_ERR "53C400w: no 53C80 gated irq after transfer (last block)\n");
+	/* wait for 53C80 registers to be available */
+	while (!(NCR5380_read(hostdata->c400_ctl_status) & CSR_53C80_REG)) {
+		udelay(4); /* DTC436 chip hangs without this */
+		/* FIXME - no timeout */
+	}
 
-#if 0
 	if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_END_DMA_TRANSFER)) {
 		printk(KERN_ERR "53C400w: no end dma signal\n");
 	}
-#endif
+
 	while (!(NCR5380_read(TARGET_COMMAND_REG) & TCR_LAST_BYTE_SENT))
 		; 	// TIMEOUT
 	return 0;
 }
+
+static int generic_NCR5380_dma_xfer_len(struct scsi_cmnd *cmd)
+{
+	int transfersize = cmd->transfersize;
+
+	/* Limit transfers to 32K, for xx400 & xx406
+	 * pseudoDMA that transfers in 128 bytes blocks.
+	 */
+	if (transfersize > 32 * 1024 && cmd->SCp.this_residual &&
+	    !(cmd->SCp.this_residual % transfersize))
+		transfersize = 32 * 1024;
+
+	/* 53C400 datasheet: non-modulo-128-byte transfers should use PIO */
+	if (transfersize % 128)
+		transfersize = 0;
+
+	return transfersize;
+}
+
 #endif /* PSEUDO_DMA */
 
 /*
@@ -696,7 +765,7 @@ static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src,
 #include "NCR5380.c"
 
 static struct scsi_host_template driver_template = {
-	.show_info      	= generic_NCR5380_show_info,
+	.proc_name		= DRV_MODULE_NAME,
 	.name			= "Generic NCR5380/NCR53C400 SCSI",
 	.detect			= generic_NCR5380_detect,
 	.release		= generic_NCR5380_release_resources,
@@ -705,13 +774,15 @@ static struct scsi_host_template driver_template = {
 	.eh_abort_handler	= generic_NCR5380_abort,
 	.eh_bus_reset_handler	= generic_NCR5380_bus_reset,
 	.bios_param		= NCR5380_BIOSPARAM,
-	.can_queue      	= CAN_QUEUE,
+	.can_queue		= 16,
 	.this_id		= 7,
 	.sg_tablesize		= SG_ALL,
-	.cmd_per_lun    	= CMD_PER_LUN,
+	.cmd_per_lun		= 2,
 	.use_clustering		= DISABLE_CLUSTERING,
+	.cmd_size		= NCR5380_CMD_SIZE,
+	.max_sectors		= 128,
 };
-#include <linux/module.h>
+
 #include "scsi_module.c"
 
 module_param(ncr_irq, int, 0);
@@ -721,6 +792,7 @@ module_param(ncr_5380, int, 0);
 module_param(ncr_53c400, int, 0);
 module_param(ncr_53c400a, int, 0);
 module_param(dtc_3181e, int, 0);
+module_param(hp_c2502, int, 0);
 MODULE_LICENSE("GPL");
 
 #if !defined(SCSI_G_NCR5380_MEM) && defined(MODULE)

drivers/scsi/g_NCR5380.h

@@ -14,81 +14,67 @@
 #ifndef GENERIC_NCR5380_H
 #define GENERIC_NCR5380_H
 
-#ifdef NCR53C400
+#ifdef CONFIG_SCSI_GENERIC_NCR53C400
 #define BIOSPARAM
 #define NCR5380_BIOSPARAM generic_NCR5380_biosparam
 #else
 #define NCR5380_BIOSPARAM NULL
 #endif
 
-#ifndef ASM
-
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 2
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 16
-#endif
-
 #define __STRVAL(x) #x
 #define STRVAL(x) __STRVAL(x)
 
 #ifndef SCSI_G_NCR5380_MEM
+#define DRV_MODULE_NAME "g_NCR5380"
 
-#define NCR5380_map_config port
 #define NCR5380_map_type int
 #define NCR5380_map_name port
-#define NCR5380_instance_name io_port
-#define NCR53C400_register_offset 0
-#define NCR53C400_address_adjust 8
 
-#ifdef NCR53C400
+#ifdef CONFIG_SCSI_GENERIC_NCR53C400
 #define NCR5380_region_size 16
 #else
 #define NCR5380_region_size 8
 #endif
 
-#define NCR5380_read(reg) (inb(NCR5380_map_name + (reg)))
-#define NCR5380_write(reg, value) (outb((value), (NCR5380_map_name + (reg))))
+#define NCR5380_read(reg) \
+	inb(instance->io_port + (reg))
+#define NCR5380_write(reg, value) \
+	outb(value, instance->io_port + (reg))
 
 #define NCR5380_implementation_fields \
-    NCR5380_map_type NCR5380_map_name
-
-#define NCR5380_local_declare() \
-    register NCR5380_implementation_fields
-
-#define NCR5380_setup(instance) \
-    NCR5380_map_name = (NCR5380_map_type)((instance)->NCR5380_instance_name)
+	int c400_ctl_status; \
+	int c400_blk_cnt; \
+	int c400_host_buf; \
+	int io_width;
 
 #else 
 /* therefore SCSI_G_NCR5380_MEM */
+#define DRV_MODULE_NAME "g_NCR5380_mmio"
 
-#define NCR5380_map_config memory
 #define NCR5380_map_type unsigned long
 #define NCR5380_map_name base
-#define NCR5380_instance_name base
-#define NCR53C400_register_offset 0x108
-#define NCR53C400_address_adjust 0
 #define NCR53C400_mem_base 0x3880
 #define NCR53C400_host_buffer 0x3900
 #define NCR5380_region_size 0x3a00
 
-#define NCR5380_read(reg) readb(iomem + NCR53C400_mem_base + (reg))
-#define NCR5380_write(reg, value) writeb(value, iomem + NCR53C400_mem_base + (reg))
+#define NCR5380_read(reg) \
+	readb(((struct NCR5380_hostdata *)shost_priv(instance))->iomem + \
+	      NCR53C400_mem_base + (reg))
+#define NCR5380_write(reg, value) \
+	writeb(value, ((struct NCR5380_hostdata *)shost_priv(instance))->iomem + \
+	       NCR53C400_mem_base + (reg))
 
 #define NCR5380_implementation_fields \
-    NCR5380_map_type NCR5380_map_name; \
-    void __iomem *iomem;
-
-#define NCR5380_local_declare() \
-    register void __iomem *iomem
-
-#define NCR5380_setup(instance) \
-    iomem = (((struct NCR5380_hostdata *)(instance)->hostdata)->iomem)
+	void __iomem *iomem; \
+	int c400_ctl_status; \
+	int c400_blk_cnt; \
+	int c400_host_buf;
 
 #endif
 
+#define NCR5380_dma_xfer_len(instance, cmd, phase) \
+        generic_NCR5380_dma_xfer_len(cmd)
+
 #define NCR5380_intr generic_NCR5380_intr
 #define NCR5380_queue_command generic_NCR5380_queue_command
 #define NCR5380_abort generic_NCR5380_abort
@@ -102,7 +88,7 @@
 #define BOARD_NCR53C400	1
 #define BOARD_NCR53C400A 2
 #define BOARD_DTC3181E	3
+#define BOARD_HP_C2502	4
 
-#endif /* ndef ASM */
 #endif /* GENERIC_NCR5380_H */
 

drivers/scsi/hisi_sas/hisi_sas_v1_hw.c

@@ -247,41 +247,36 @@
 /* ITCT header */
 /* qw0 */
 #define ITCT_HDR_DEV_TYPE_OFF		0
-#define ITCT_HDR_DEV_TYPE_MSK		(0x3 << ITCT_HDR_DEV_TYPE_OFF)
+#define ITCT_HDR_DEV_TYPE_MSK		(0x3ULL << ITCT_HDR_DEV_TYPE_OFF)
 #define ITCT_HDR_VALID_OFF		2
-#define ITCT_HDR_VALID_MSK		(0x1 << ITCT_HDR_VALID_OFF)
-#define ITCT_HDR_BREAK_REPLY_ENA_OFF	3
-#define ITCT_HDR_BREAK_REPLY_ENA_MSK	(0x1 << ITCT_HDR_BREAK_REPLY_ENA_OFF)
+#define ITCT_HDR_VALID_MSK		(0x1ULL << ITCT_HDR_VALID_OFF)
 #define ITCT_HDR_AWT_CONTROL_OFF	4
-#define ITCT_HDR_AWT_CONTROL_MSK	(0x1 << ITCT_HDR_AWT_CONTROL_OFF)
+#define ITCT_HDR_AWT_CONTROL_MSK	(0x1ULL << ITCT_HDR_AWT_CONTROL_OFF)
 #define ITCT_HDR_MAX_CONN_RATE_OFF	5
-#define ITCT_HDR_MAX_CONN_RATE_MSK	(0xf << ITCT_HDR_MAX_CONN_RATE_OFF)
+#define ITCT_HDR_MAX_CONN_RATE_MSK	(0xfULL << ITCT_HDR_MAX_CONN_RATE_OFF)
 #define ITCT_HDR_VALID_LINK_NUM_OFF	9
-#define ITCT_HDR_VALID_LINK_NUM_MSK	(0xf << ITCT_HDR_VALID_LINK_NUM_OFF)
+#define ITCT_HDR_VALID_LINK_NUM_MSK	(0xfULL << ITCT_HDR_VALID_LINK_NUM_OFF)
 #define ITCT_HDR_PORT_ID_OFF		13
-#define ITCT_HDR_PORT_ID_MSK		(0x7 << ITCT_HDR_PORT_ID_OFF)
+#define ITCT_HDR_PORT_ID_MSK		(0x7ULL << ITCT_HDR_PORT_ID_OFF)
 #define ITCT_HDR_SMP_TIMEOUT_OFF	16
-#define ITCT_HDR_SMP_TIMEOUT_MSK	(0xffff << ITCT_HDR_SMP_TIMEOUT_OFF)
-#define ITCT_HDR_MAX_BURST_BYTES_OFF	16
-#define ITCT_HDR_MAX_BURST_BYTES_MSK	(0xffffffff << \
-					ITCT_MAX_BURST_BYTES_OFF)
+#define ITCT_HDR_SMP_TIMEOUT_MSK	(0xffffULL << ITCT_HDR_SMP_TIMEOUT_OFF)
 /* qw1 */
 #define ITCT_HDR_MAX_SAS_ADDR_OFF	0
 #define ITCT_HDR_MAX_SAS_ADDR_MSK	(0xffffffffffffffff << \
 					ITCT_HDR_MAX_SAS_ADDR_OFF)
 /* qw2 */
 #define ITCT_HDR_IT_NEXUS_LOSS_TL_OFF	0
-#define ITCT_HDR_IT_NEXUS_LOSS_TL_MSK	(0xffff << \
+#define ITCT_HDR_IT_NEXUS_LOSS_TL_MSK	(0xffffULL << \
 					ITCT_HDR_IT_NEXUS_LOSS_TL_OFF)
 #define ITCT_HDR_BUS_INACTIVE_TL_OFF	16
-#define ITCT_HDR_BUS_INACTIVE_TL_MSK	(0xffff << \
+#define ITCT_HDR_BUS_INACTIVE_TL_MSK	(0xffffULL << \
 					ITCT_HDR_BUS_INACTIVE_TL_OFF)
 #define ITCT_HDR_MAX_CONN_TL_OFF	32
-#define ITCT_HDR_MAX_CONN_TL_MSK	(0xffff << \
+#define ITCT_HDR_MAX_CONN_TL_MSK	(0xffffULL << \
 					ITCT_HDR_MAX_CONN_TL_OFF)
 #define ITCT_HDR_REJ_OPEN_TL_OFF	48
-#define ITCT_HDR_REJ_OPEN_TL_MSK	(0xffff << \
-					ITCT_REJ_OPEN_TL_OFF)
+#define ITCT_HDR_REJ_OPEN_TL_MSK	(0xffffULL << \
+					ITCT_HDR_REJ_OPEN_TL_OFF)
 
 /* Err record header */
 #define ERR_HDR_DMA_TX_ERR_TYPE_OFF	0
@@ -533,10 +528,10 @@ static void setup_itct_v1_hw(struct hisi_hba *hisi_hba,
 	itct->sas_addr = __swab64(itct->sas_addr);
 
 	/* qw2 */
-	itct->qw2 = cpu_to_le64((500 < ITCT_HDR_IT_NEXUS_LOSS_TL_OFF) |
-				(0xff00 < ITCT_HDR_BUS_INACTIVE_TL_OFF) |
-				(0xff00 < ITCT_HDR_MAX_CONN_TL_OFF) |
-				(0xff00 < ITCT_HDR_REJ_OPEN_TL_OFF));
+	itct->qw2 = cpu_to_le64((500ULL << ITCT_HDR_IT_NEXUS_LOSS_TL_OFF) |
+				(0xff00ULL << ITCT_HDR_BUS_INACTIVE_TL_OFF) |
+				(0xff00ULL << ITCT_HDR_MAX_CONN_TL_OFF) |
+				(0xff00ULL << ITCT_HDR_REJ_OPEN_TL_OFF));
 }
 
 static void free_device_v1_hw(struct hisi_hba *hisi_hba,
@@ -544,7 +539,8 @@ static void free_device_v1_hw(struct hisi_hba *hisi_hba,
 {
 	u64 dev_id = sas_dev->device_id;
 	struct hisi_sas_itct *itct = &hisi_hba->itct[dev_id];
-	u32 qw0, reg_val = hisi_sas_read32(hisi_hba, CFG_AGING_TIME);
+	u64 qw0;
+	u32 reg_val = hisi_sas_read32(hisi_hba, CFG_AGING_TIME);
 
 	reg_val |= CFG_AGING_TIME_ITCT_REL_MSK;
 	hisi_sas_write32(hisi_hba, CFG_AGING_TIME, reg_val);

drivers/scsi/imm.c

@@ -43,6 +43,7 @@ typedef struct {
 	unsigned dp:1;		/* Data phase present           */
 	unsigned rd:1;		/* Read data in data phase      */
 	unsigned wanted:1;	/* Parport sharing busy flag    */
+	unsigned int dev_no;	/* Device number		*/
 	wait_queue_head_t *waiting;
 	struct Scsi_Host *host;
 	struct list_head list;
@@ -1120,15 +1121,40 @@ static struct scsi_host_template imm_template = {
 
 static LIST_HEAD(imm_hosts);
 
+/*
+ * Finds the first available device number that can be alloted to the
+ * new imm device and returns the address of the previous node so that
+ * we can add to the tail and have a list in the ascending order.
+ */
+
+static inline imm_struct *find_parent(void)
+{
+	imm_struct *dev, *par = NULL;
+	unsigned int cnt = 0;
+
+	if (list_empty(&imm_hosts))
+		return NULL;
+
+	list_for_each_entry(dev, &imm_hosts, list) {
+		if (dev->dev_no != cnt)
+			return par;
+		cnt++;
+		par = dev;
+	}
+
+	return par;
+}
+
 static int __imm_attach(struct parport *pb)
 {
 	struct Scsi_Host *host;
-	imm_struct *dev;
+	imm_struct *dev, *temp;
 	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waiting);
 	DEFINE_WAIT(wait);
 	int ports;
 	int modes, ppb;
 	int err = -ENOMEM;
+	struct pardev_cb imm_cb;
 
 	init_waitqueue_head(&waiting);
 
@@ -1141,9 +1167,15 @@ static int __imm_attach(struct parport *pb)
 	dev->mode = IMM_AUTODETECT;
 	INIT_LIST_HEAD(&dev->list);
 
-	dev->dev = parport_register_device(pb, "imm", NULL, imm_wakeup,
-						NULL, 0, dev);
+	temp = find_parent();
+	if (temp)
+		dev->dev_no = temp->dev_no + 1;
+
+	memset(&imm_cb, 0, sizeof(imm_cb));
+	imm_cb.private = dev;
+	imm_cb.wakeup = imm_wakeup;
 
+	dev->dev = parport_register_dev_model(pb, "imm", &imm_cb, dev->dev_no);
 	if (!dev->dev)
 		goto out;
 
@@ -1207,7 +1239,10 @@ static int __imm_attach(struct parport *pb)
 	host->unique_id = pb->number;
 	*(imm_struct **)&host->hostdata = dev;
 	dev->host = host;
+	if (!temp)
 		list_add_tail(&dev->list, &imm_hosts);
+	else
+		list_add_tail(&dev->list, &temp->list);
 	err = scsi_add_host(host, NULL);
 	if (err)
 		goto out2;
@@ -1246,8 +1281,9 @@ static void imm_detach(struct parport *pb)
 
 static struct parport_driver imm_driver = {
 	.name		= "imm",
-	.attach	= imm_attach,
+	.match_port	= imm_attach,
 	.detach		= imm_detach,
+	.devmodel	= true,
 };
 
 static int __init imm_driver_init(void)

drivers/scsi/ipr.c

@@ -4003,13 +4003,12 @@ static ssize_t ipr_store_update_fw(struct device *dev,
 	struct ipr_sglist *sglist;
 	char fname[100];
 	char *src;
-	int len, result, dnld_size;
+	int result, dnld_size;
 
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
 
-	len = snprintf(fname, 99, "%s", buf);
-	fname[len-1] = '\0';
+	snprintf(fname, sizeof(fname), "%s", buf);
 
 	if (request_firmware(&fw_entry, fname, &ioa_cfg->pdev->dev)) {
 		dev_err(&ioa_cfg->pdev->dev, "Firmware file %s not found\n", fname);

drivers/scsi/megaraid/megaraid_mm.c

@@ -179,8 +179,12 @@ mraid_mm_ioctl(struct file *filep, unsigned int cmd, unsigned long arg)
 
 	/*
 	 * The following call will block till a kioc is available
+	 * or return NULL if the list head is empty for the pointer
+	 * of type mraid_mmapt passed to mraid_mm_alloc_kioc
 	 */
 	kioc = mraid_mm_alloc_kioc(adp);
+	if (!kioc)
+		return -ENXIO;
 
 	/*
 	 * User sent the old mimd_t ioctl packet. Convert it to uioc_t.