Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 4a568f7f 编写于 作者: T Tony Lindgren
浏览文件
操作

Merge branch 'omap-for-v4.14/mmc-regulator' into omap-for-v4.14/dt

上级 b7ced444 45ea75eb
显示空白变更内容
内联 并排
Showing with 80 addition and 19 deletion
arch/arm/boot/dts/am572x-idk.dts
浏览文件 @ 4a568f7f
......@@ -79,7 +79,7 @@
&mmc1 {
status = "okay";
vmmc-supply = <&v3_3d>;
vmmc_aux-supply = <&ldo1_reg>;
vqmmc-supply = <&ldo1_reg>;
bus-width = <4>;
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
};
......
arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
浏览文件 @ 4a568f7f
......@@ -20,7 +20,7 @@
&mmc1 {
vmmc-supply = <&vdd_3v3>;
vmmc-aux-supply = <&ldo1_reg>;
vqmmc-supply = <&ldo1_reg>;
};
/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
......
arch/arm/boot/dts/dra7-evm.dts
浏览文件 @ 4a568f7f
......@@ -25,6 +25,14 @@
stdout-path = &uart1;
};
evm_1v8_sw: fixedregulator-evm_1v8 {
compatible = "regulator-fixed";
regulator-name = "evm_1v8";
vin-supply = <&smps9_reg>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
evm_3v3_sd: fixedregulator-sd {
compatible = "regulator-fixed";
regulator-name = "evm_3v3_sd";
......@@ -438,7 +446,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_default>;
vmmc-supply = <&evm_3v3_sd>;
vmmc_aux-supply = <&ldo1_reg>;
vqmmc-supply = <&ldo1_reg>;
bus-width = <4>;
/*
* SDCD signal is not being used here - using the fact that GPIO mode
......@@ -451,7 +459,7 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_default>;
vmmc-supply = <&evm_3v3_sw>;
vmmc-supply = <&evm_1v8_sw>;
bus-width = <8>;
};
......
arch/arm/boot/dts/dra7.dtsi
浏览文件 @ 4a568f7f
......@@ -1037,6 +1037,7 @@
dma-names = "tx", "rx";
status = "disabled";
pbias-supply = <&pbias_mmc_reg>;
max-frequency = <192000000>;
};
mmc2: mmc@480b4000 {
......@@ -1048,6 +1049,7 @@
dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
dma-names = "tx", "rx";
status = "disabled";
max-frequency = <192000000>;
};
mmc3: mmc@480ad000 {
......@@ -1059,6 +1061,8 @@
dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
dma-names = "tx", "rx";
status = "disabled";
/* Errata i887 limits max-frequency of MMC3 to 64 MHz */
max-frequency = <64000000>;
};
mmc4: mmc@480d1000 {
......@@ -1070,6 +1074,7 @@
dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
dma-names = "tx", "rx";
status = "disabled";
max-frequency = <192000000>;
};
mmu0_dsp1: mmu@40d01000 {
......
arch/arm/boot/dts/dra71-evm.dts
浏览文件 @ 4a568f7f
......@@ -32,6 +32,16 @@
3000000 0x1>;
};
evm_1v8_sw: fixedregulator-evm_1v8 {
compatible = "regulator-fixed";
regulator-name = "evm_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&lp8732_buck0_reg>;
regulator-always-on;
regulator-boot-on;
};
poweroff: gpio-poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
......@@ -162,7 +172,11 @@
};
&mmc1 {
vmmc_aux-supply = <&vpo_sd_1v8_3v3>;
vqmmc-supply = <&vpo_sd_1v8_3v3>;
};
&mmc2 {
vmmc-supply = <&evm_1v8_sw>;
};
&mac {
......
arch/arm/boot/dts/dra72-evm-common.dtsi
浏览文件 @ 4a568f7f
......@@ -419,8 +419,6 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_default>;
vmmc-supply = <&evm_3v3_sw>;
bus-width = <8>;
ti,non-removable;
max-frequency = <192000000>;
......
arch/arm/boot/dts/dra72-evm-revc.dts
浏览文件 @ 4a568f7f
......@@ -15,6 +15,16 @@
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
};
evm_1v8_sw: fixedregulator-evm_1v8 {
compatible = "regulator-fixed";
regulator-name = "evm_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&smps4_reg>;
regulator-always-on;
regulator-boot-on;
};
};
&i2c1 {
......@@ -82,3 +92,11 @@
interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
};
};
&mmc1 {
vqmmc-supply = <&ldo1_reg>;
};
&mmc2 {
vmmc-supply = <&evm_1v8_sw>;
};
arch/arm/boot/dts/dra72-evm-tps65917.dtsi
浏览文件 @ 4a568f7f
......@@ -146,5 +146,5 @@
};
&mmc1 {
vmmc_aux-supply = <&ldo1_reg>;
vqmmc-supply = <&ldo1_reg>;
};
arch/arm/boot/dts/dra72-evm.dts
浏览文件 @ 4a568f7f
......@@ -13,6 +13,16 @@
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
};
evm_1v8_sw: fixedregulator-evm_1v8 {
compatible = "regulator-fixed";
regulator-name = "evm_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&smps4_reg>;
regulator-always-on;
regulator-boot-on;
};
};
&i2c1 {
......@@ -43,3 +53,11 @@
phy_id = <&davinci_mdio>, <3>;
phy-mode = "rgmii";
};
&mmc1 {
vqmmc-supply = <&ldo1_reg>;
};
&mmc2 {
vmmc-supply = <&evm_1v8_sw>;
};
arch/arm/boot/dts/omap3-beagle-xm.dts
浏览文件 @ 4a568f7f
......@@ -299,7 +299,7 @@
&mmc1 {
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
vqmmc-supply = <&vsim>;
bus-width = <8>;
};
......
arch/arm/boot/dts/omap3-beagle.dts
浏览文件 @ 4a568f7f
......@@ -283,7 +283,7 @@
&mmc1 {
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
vqmmc-supply = <&vsim>;
bus-width = <8>;
};
......
arch/arm/boot/dts/omap3-cm-t3517.dts
浏览文件 @ 4a568f7f
......@@ -129,7 +129,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&wl12xx_vmmc2>;
vmmc_aux-supply = <&wl12xx_vaux2>;
vqmmc-supply = <&wl12xx_vaux2>;
non-removable;
bus-width = <4>;
cap-power-off-card;
......
arch/arm/boot/dts/omap3-cm-t3730.dts
浏览文件 @ 4a568f7f
......@@ -69,7 +69,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&wl12xx_vmmc2>;
vmmc_aux-supply = <&wl12xx_vaux2>;
vqmmc-supply = <&wl12xx_vaux2>;
non-removable;
bus-width = <4>;
cap-power-off-card;
......
arch/arm/boot/dts/omap3-devkit8000-common.dtsi
浏览文件 @ 4a568f7f
......@@ -149,7 +149,7 @@
&mmc1 {
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
vqmmc-supply = <&vsim>;
bus-width = <8>;
};
......
arch/arm/boot/dts/omap3-evm-common.dtsi
浏览文件 @ 4a568f7f
......@@ -115,7 +115,7 @@
&mmc1 {
interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
vqmmc-supply = <&vsim>;
bus-width = <8>;
};
......
arch/arm/boot/dts/omap3-n900.dts
浏览文件 @ 4a568f7f
......@@ -741,7 +741,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&vaux3>;
vmmc_aux-supply = <&vsim>;
vqmmc-supply = <&vsim>;
bus-width = <8>;
non-removable;
no-sdio;
......
arch/arm/boot/dts/omap3-overo-base.dtsi
浏览文件 @ 4a568f7f
......@@ -181,7 +181,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&w3cbw003c_npoweron>;
vmmc_aux-supply = <&w3cbw003c_wifi_nreset>;
vqmmc-supply = <&w3cbw003c_wifi_nreset>;
bus-width = <4>;
cap-sdio-irq;
non-removable;
......
arch/arm/boot/dts/omap3-tao3530.dtsi
浏览文件 @ 4a568f7f
......@@ -223,7 +223,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
vqmmc-supply = <&vsim>;
cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
bus-width = <8>;
};
......
arch/arm/boot/dts/omap3-zoom3.dts
浏览文件 @ 4a568f7f
......@@ -174,7 +174,7 @@
&mmc1 {
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
vqmmc-supply = <&vsim>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
......
arch/arm/boot/dts/omap3430-sdp.dts
浏览文件 @ 4a568f7f
......@@ -33,7 +33,7 @@
&mmc1 {
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
vqmmc-supply = <&vsim>;
/*
* S6-3 must be in ON position for 8 bit mode to function
* Else, use 4 bit mode
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或