提交 494f2e76 编写于 作者: D David S. Miller

Merge branch 'selftests-mirror-to-gretap-with-team'

Petr Machata says:

====================
A test for mirror-to-gretap with team in UL packet path

This patchset adds a test for "tc action mirred mirror" where the
mirrored-to device is a gretap, and underlay path contains a team
device.

In patch #1 require_command() is added, which should henceforth be used
to declare dependence on a certain tool.

In patch #2, two new functions, team_create() and team_destroy(), are
added to lib.sh.

The newly-added test uses arping, which isn't necessarily available.
Therefore patch #3 introduces $ARPING, and a preexisting test is fixed
to require_command $ARPING.

In patches #4 and #5, two new tests are added. In both cases, a team
device is on egress path of a mirrored packet in a mirror-to-gretap
scenario. In the first one, the team device is in loadbalance mode, in
the second one it's in lacp mode. (The difference in modes necessitates
a different testing strategy, hence two test cases instead of just
parameterizing one.)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
......@@ -8,6 +8,8 @@
PING=${PING:=ping}
PING6=${PING6:=ping6}
MZ=${MZ:=mausezahn}
ARPING=${ARPING:=arping}
TEAMD=${TEAMD:=teamd}
WAIT_TIME=${WAIT_TIME:=5}
PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no}
......@@ -62,15 +64,18 @@ if [[ "$CHECK_TC" = "yes" ]]; then
check_tc_version
fi
if [[ ! -x "$(command -v jq)" ]]; then
echo "SKIP: jq not installed"
exit 1
fi
require_command()
{
local cmd=$1; shift
if [[ ! -x "$(command -v $MZ)" ]]; then
echo "SKIP: $MZ not installed"
if [[ ! -x "$(command -v "$cmd")" ]]; then
echo "SKIP: $cmd not installed"
exit 1
fi
fi
}
require_command jq
require_command $MZ
if [[ ! -v NUM_NETIFS ]]; then
echo "SKIP: importer does not define \"NUM_NETIFS\""
......@@ -422,6 +427,28 @@ vlan_destroy()
ip link del dev $name
}
team_create()
{
local if_name=$1; shift
local mode=$1; shift
require_command $TEAMD
$TEAMD -t $if_name -d -c '{"runner": {"name": "'$mode'"}}'
for slave in "$@"; do
ip link set dev $slave down
ip link set dev $slave master $if_name
ip link set dev $slave up
done
ip link set dev $if_name up
}
team_destroy()
{
local if_name=$1; shift
$TEAMD -t $if_name -k
}
master_name_get()
{
local if_name=$1
......
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Test for "tc action mirred egress mirror" when the underlay route points at a
# bridge device with vlan filtering (802.1q), and the egress device is a team
# device.
#
# +----------------------+ +----------------------+
# | H1 | | H2 |
# | + $h1.333 | | $h1.555 + |
# | | 192.0.2.1/28 | | 192.0.2.18/28 | |
# +-----|----------------+ +----------------|-----+
# | $h1 |
# +--------------------------------+------------------------------+
# |
# +--------------------------------------|------------------------------------+
# | SW o---> mirror |
# | | |
# | +--------------------------------+------------------------------+ |
# | | $swp1 | |
# | + $swp1.333 $swp1.555 + |
# | 192.0.2.2/28 192.0.2.17/28 |
# | |
# | +-----------------------------------------------------------------------+ |
# | | BR1 (802.1q) | |
# | | + lag (team) 192.0.2.129/28 | |
# | | / \ 2001:db8:2::1/64 | |
# | +---/---\---------------------------------------------------------------+ |
# | / \ ^ |
# | | \ + gt4 (gretap) | |
# | | \ loc=192.0.2.129 | |
# | | \ rem=192.0.2.130 -+ |
# | | \ ttl=100 |
# | | \ tos=inherit |
# | | \ |
# | | \_________________________________ |
# | | \ |
# | + $swp3 + $swp4 |
# +---|------------------------------------------------|----------------------+
# | |
# +---|----------------------+ +---|----------------------+
# | + $h3 H3 | | + $h4 H4 |
# | 192.0.2.130/28 | | 192.0.2.130/28 |
# | 2001:db8:2::2/64 | | 2001:db8:2::2/64 |
# +--------------------------+ +--------------------------+
ALL_TESTS="
test_mirror_gretap_first
test_mirror_gretap_second
"
NUM_NETIFS=6
source lib.sh
source mirror_lib.sh
source mirror_gre_lib.sh
require_command $ARPING
vlan_host_create()
{
local if_name=$1; shift
local vid=$1; shift
local vrf_name=$1; shift
local ips=("${@}")
vrf_create $vrf_name
ip link set dev $vrf_name up
vlan_create $if_name $vid $vrf_name "${ips[@]}"
}
vlan_host_destroy()
{
local if_name=$1; shift
local vid=$1; shift
local vrf_name=$1; shift
vlan_destroy $if_name $vid
ip link set dev $vrf_name down
vrf_destroy $vrf_name
}
h1_create()
{
vlan_host_create $h1 333 vrf-h1 192.0.2.1/28
ip -4 route add 192.0.2.16/28 vrf vrf-h1 nexthop via 192.0.2.2
}
h1_destroy()
{
ip -4 route del 192.0.2.16/28 vrf vrf-h1
vlan_host_destroy $h1 333 vrf-h1
}
h2_create()
{
vlan_host_create $h1 555 vrf-h2 192.0.2.18/28
ip -4 route add 192.0.2.0/28 vrf vrf-h2 nexthop via 192.0.2.17
}
h2_destroy()
{
ip -4 route del 192.0.2.0/28 vrf vrf-h2
vlan_host_destroy $h1 555 vrf-h2
}
h3_create()
{
simple_if_init $h3 192.0.2.130/28
tc qdisc add dev $h3 clsact
}
h3_destroy()
{
tc qdisc del dev $h3 clsact
simple_if_fini $h3 192.0.2.130/28
}
h4_create()
{
simple_if_init $h4 192.0.2.130/28
tc qdisc add dev $h4 clsact
}
h4_destroy()
{
tc qdisc del dev $h4 clsact
simple_if_fini $h4 192.0.2.130/28
}
switch_create()
{
ip link set dev $swp1 up
tc qdisc add dev $swp1 clsact
vlan_create $swp1 333 "" 192.0.2.2/28
vlan_create $swp1 555 "" 192.0.2.17/28
tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
ttl 100 tos inherit
ip link set dev $swp3 up
ip link set dev $swp4 up
ip link add name br1 type bridge vlan_filtering 1
ip link set dev br1 up
__addr_add_del br1 add 192.0.2.129/32
ip -4 route add 192.0.2.130/32 dev br1
team_create lag loadbalance $swp3 $swp4
ip link set dev lag master br1
}
switch_destroy()
{
ip link set dev lag nomaster
team_destroy lag
ip -4 route del 192.0.2.130/32 dev br1
__addr_add_del br1 del 192.0.2.129/32
ip link set dev br1 down
ip link del dev br1
ip link set dev $swp4 down
ip link set dev $swp3 down
tunnel_destroy gt4
vlan_destroy $swp1 555
vlan_destroy $swp1 333
tc qdisc del dev $swp1 clsact
ip link set dev $swp1 down
}
setup_prepare()
{
h1=${NETIFS[p1]}
swp1=${NETIFS[p2]}
swp3=${NETIFS[p3]}
h3=${NETIFS[p4]}
swp4=${NETIFS[p5]}
h4=${NETIFS[p6]}
vrf_prepare
ip link set dev $h1 up
h1_create
h2_create
h3_create
h4_create
switch_create
trap_install $h3 ingress
trap_install $h4 ingress
}
cleanup()
{
pre_cleanup
trap_uninstall $h4 ingress
trap_uninstall $h3 ingress
switch_destroy
h4_destroy
h3_destroy
h2_destroy
h1_destroy
ip link set dev $h1 down
vrf_cleanup
}
test_lag_slave()
{
local host_dev=$1; shift
local up_dev=$1; shift
local down_dev=$1; shift
local what=$1; shift
RET=0
mirror_install $swp1 ingress gt4 \
"proto 802.1q flower vlan_id 333 $tcflags"
# Test connectivity through $up_dev when $down_dev is set down.
ip link set dev $down_dev down
setup_wait_dev $up_dev
setup_wait_dev $host_dev
$ARPING -I br1 192.0.2.130 -qfc 1
sleep 2
mirror_test vrf-h1 192.0.2.1 192.0.2.18 $host_dev 1 10
# Test lack of connectivity when both slaves are down.
ip link set dev $up_dev down
sleep 2
mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0
mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0
ip link set dev $up_dev up
ip link set dev $down_dev up
mirror_uninstall $swp1 ingress
log_test "$what ($tcflags)"
}
test_mirror_gretap_first()
{
test_lag_slave $h3 $swp3 $swp4 "mirror to gretap: LAG first slave"
}
test_mirror_gretap_second()
{
test_lag_slave $h4 $swp4 $swp3 "mirror to gretap: LAG second slave"
}
test_all()
{
slow_path_trap_install $swp1 ingress
slow_path_trap_install $swp1 egress
tests_run
slow_path_trap_uninstall $swp1 egress
slow_path_trap_uninstall $swp1 ingress
}
trap cleanup EXIT
setup_prepare
setup_wait
tcflags="skip_hw"
test_all
if ! tc_offload_check; then
echo "WARN: Could not test offloaded functionality"
else
tcflags="skip_sw"
test_all
fi
exit $EXIT_STATUS
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# Test for "tc action mirred egress mirror" when the underlay route points at a
# team device.
#
# +----------------------+ +----------------------+
# | H1 | | H2 |
# | + $h1.333 | | $h1.555 + |
# | | 192.0.2.1/28 | | 192.0.2.18/28 | |
# +----|-----------------+ +----------------|-----+
# | $h1 |
# +---------------------------------+------------------------------+
# |
# +--------------------------------------|------------------------------------+
# | SW o---> mirror |
# | | |
# | +----------------------------------+------------------------------+ |
# | | $swp1 | |
# | + $swp1.333 $swp1.555 + |
# | 192.0.2.2/28 192.0.2.17/28 |
# | |
# | |
# | + gt4 (gretap) ,-> + lag1 (team) |
# | loc=192.0.2.129 | | 192.0.2.129/28 |
# | rem=192.0.2.130 --' | |
# | ttl=100 | |
# | tos=inherit | |
# | _____________________|______________________ |
# | / \ |
# | / \ |
# | + $swp3 + $swp4 |
# +---|------------------------------------------------|----------------------+
# | |
# +---|------------------------------------------------|----------------------+
# | + $h3 + $h4 H3 |
# | \ / |
# | \____________________________________________/ |
# | | |
# | + lag2 (team) |
# | 192.0.2.130/28 |
# | |
# +---------------------------------------------------------------------------+
ALL_TESTS="
test_mirror_gretap_first
test_mirror_gretap_second
"
NUM_NETIFS=6
source lib.sh
source mirror_lib.sh
source mirror_gre_lib.sh
require_command $ARPING
vlan_host_create()
{
local if_name=$1; shift
local vid=$1; shift
local vrf_name=$1; shift
local ips=("${@}")
vrf_create $vrf_name
ip link set dev $vrf_name up
vlan_create $if_name $vid $vrf_name "${ips[@]}"
}
vlan_host_destroy()
{
local if_name=$1; shift
local vid=$1; shift
local vrf_name=$1; shift
vlan_destroy $if_name $vid
ip link set dev $vrf_name down
vrf_destroy $vrf_name
}
h1_create()
{
vlan_host_create $h1 333 vrf-h1 192.0.2.1/28
ip -4 route add 192.0.2.16/28 vrf vrf-h1 nexthop via 192.0.2.2
}
h1_destroy()
{
ip -4 route del 192.0.2.16/28 vrf vrf-h1
vlan_host_destroy $h1 333 vrf-h1
}
h2_create()
{
vlan_host_create $h1 555 vrf-h2 192.0.2.18/28
ip -4 route add 192.0.2.0/28 vrf vrf-h2 nexthop via 192.0.2.17
}
h2_destroy()
{
ip -4 route del 192.0.2.0/28 vrf vrf-h2
vlan_host_destroy $h1 555 vrf-h2
}
h3_create_team()
{
team_create lag2 lacp $h3 $h4
__simple_if_init lag2 vrf-h3 192.0.2.130/32
ip -4 route add vrf vrf-h3 192.0.2.129/32 dev lag2
}
h3_destroy_team()
{
ip -4 route del vrf vrf-h3 192.0.2.129/32 dev lag2
__simple_if_fini lag2 192.0.2.130/32
team_destroy lag2
ip link set dev $h3 down
ip link set dev $h4 down
}
h3_create()
{
vrf_create vrf-h3
ip link set dev vrf-h3 up
tc qdisc add dev $h3 clsact
tc qdisc add dev $h4 clsact
h3_create_team
}
h3_destroy()
{
h3_destroy_team
tc qdisc del dev $h4 clsact
tc qdisc del dev $h3 clsact
ip link set dev vrf-h3 down
vrf_destroy vrf-h3
}
switch_create()
{
ip link set dev $swp1 up
tc qdisc add dev $swp1 clsact
vlan_create $swp1 333 "" 192.0.2.2/28
vlan_create $swp1 555 "" 192.0.2.17/28
tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
ttl 100 tos inherit
ip link set dev $swp3 up
ip link set dev $swp4 up
team_create lag1 lacp $swp3 $swp4
__addr_add_del lag1 add 192.0.2.129/32
ip -4 route add 192.0.2.130/32 dev lag1
}
switch_destroy()
{
ip -4 route del 192.0.2.130/32 dev lag1
__addr_add_del lag1 del 192.0.2.129/32
team_destroy lag1
ip link set dev $swp4 down
ip link set dev $swp3 down
tunnel_destroy gt4
vlan_destroy $swp1 555
vlan_destroy $swp1 333
tc qdisc del dev $swp1 clsact
ip link set dev $swp1 down
}
setup_prepare()
{
h1=${NETIFS[p1]}
swp1=${NETIFS[p2]}
swp3=${NETIFS[p3]}
h3=${NETIFS[p4]}
swp4=${NETIFS[p5]}
h4=${NETIFS[p6]}
vrf_prepare
ip link set dev $h1 up
h1_create
h2_create
h3_create
switch_create
trap_install $h3 ingress
trap_install $h4 ingress
}
cleanup()
{
pre_cleanup
trap_uninstall $h4 ingress
trap_uninstall $h3 ingress
switch_destroy
h3_destroy
h2_destroy
h1_destroy
ip link set dev $h1 down
vrf_cleanup
}
test_lag_slave()
{
local up_dev=$1; shift
local down_dev=$1; shift
local what=$1; shift
RET=0
mirror_install $swp1 ingress gt4 \
"proto 802.1q flower vlan_id 333 $tcflags"
# Move $down_dev away from the team. That will prompt change in
# txability of the connected device, without changing its upness. The
# driver should notice the txability change and move the traffic to the
# other slave.
ip link set dev $down_dev nomaster
sleep 2
mirror_test vrf-h1 192.0.2.1 192.0.2.18 $up_dev 1 10
# Test lack of connectivity when neither slave is txable.
ip link set dev $up_dev nomaster
sleep 2
mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0
mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0
mirror_uninstall $swp1 ingress
# Recreate H3's team device, because mlxsw, which this test is
# predominantly mean to test, requires a bottom-up construction and
# doesn't allow enslavement to a device that already has an upper.
h3_destroy_team
h3_create_team
# Wait for ${h,swp}{3,4}.
setup_wait
log_test "$what ($tcflags)"
}
test_mirror_gretap_first()
{
test_lag_slave $h3 $h4 "mirror to gretap: LAG first slave"
}
test_mirror_gretap_second()
{
test_lag_slave $h4 $h3 "mirror to gretap: LAG second slave"
}
test_all()
{
slow_path_trap_install $swp1 ingress
slow_path_trap_install $swp1 egress
tests_run
slow_path_trap_uninstall $swp1 egress
slow_path_trap_uninstall $swp1 ingress
}
trap cleanup EXIT
setup_prepare
setup_wait
tcflags="skip_hw"
test_all
if ! tc_offload_check; then
echo "WARN: Could not test offloaded functionality"
else
tcflags="skip_sw"
test_all
fi
exit $EXIT_STATUS
......@@ -28,6 +28,8 @@ source mirror_lib.sh
source mirror_gre_lib.sh
source mirror_gre_topo_lib.sh
require_command $ARPING
setup_prepare()
{
h1=${NETIFS[p1]}
......@@ -149,7 +151,7 @@ test_span_gre_forbidden_egress()
bridge vlan add dev $swp3 vid 555
# Re-prime FDB
arping -I br1.555 192.0.2.130 -fqc 1
$ARPING -I br1.555 192.0.2.130 -fqc 1
sleep 1
quick_test_span_gre_dir $tundev ingress
......@@ -223,7 +225,7 @@ test_span_gre_fdb_roaming()
bridge fdb del dev $swp2 $h3mac vlan 555 master
# Re-prime FDB
arping -I br1.555 192.0.2.130 -fqc 1
$ARPING -I br1.555 192.0.2.130 -fqc 1
sleep 1
quick_test_span_gre_dir $tundev ingress
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册