From 4909fe979c4863bb748cd35e2cec9aab1e140a10 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Sat, 12 Nov 2011 01:12:16 +0000 Subject: [PATCH] ixgbe: DCBnl set_all, order of operations fix The order of operations is important in DCBnl set_all(). When FCoE is configured it uses the up2tc map to learn which queues to configure the hardware offloads on. Therefore we need to setup the map before configuring FCoE. This is only seen when the both up2tc mappings and APP info are configured simultaneously. Signed-off-by: John Fastabend Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher --- .../net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c | 77 +++++++------------ 1 file changed, 29 insertions(+), 48 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c index 33b93ffb87cb..8c056c06761f 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c @@ -309,6 +309,27 @@ static void ixgbe_dcbnl_get_pfc_cfg(struct net_device *netdev, int priority, *setting = adapter->dcb_cfg.tc_config[priority].dcb_pfc; } +#ifdef IXGBE_FCOE +static void ixgbe_dcbnl_devreset(struct net_device *dev) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + + while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) + usleep_range(1000, 2000); + + if (netif_running(dev)) + dev->netdev_ops->ndo_stop(dev); + + ixgbe_clear_interrupt_scheme(adapter); + ixgbe_init_interrupt_scheme(adapter); + + if (netif_running(dev)) + dev->netdev_ops->ndo_open(dev); + + clear_bit(__IXGBE_RESETTING, &adapter->state); +} +#endif + static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) { struct ixgbe_adapter *adapter = netdev_priv(netdev); @@ -338,27 +359,6 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) if (ret) return DCB_NO_HW_CHG; -#ifdef IXGBE_FCOE - if (up && !(up & (1 << adapter->fcoe.up))) - adapter->dcb_set_bitmap |= BIT_APP_UPCHG; - - /* - * Only take down the adapter if an app change occurred. FCoE - * may shuffle tx rings in this case and this can not be done - * without a reset currently. - */ - if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) { - while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) - usleep_range(1000, 2000); - - adapter->fcoe.up = ffs(up) - 1; - - if (netif_running(netdev)) - netdev->netdev_ops->ndo_stop(netdev); - ixgbe_clear_interrupt_scheme(adapter); - } -#endif - if (adapter->dcb_cfg.pfc_mode_enable) { switch (adapter->hw.mac.type) { case ixgbe_mac_82599EB: @@ -385,15 +385,6 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) } } -#ifdef IXGBE_FCOE - if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) { - ixgbe_init_interrupt_scheme(adapter); - if (netif_running(netdev)) - netdev->netdev_ops->ndo_open(netdev); - ret = DCB_HW_CHG_RST; - } -#endif - if (adapter->dcb_set_bitmap & (BIT_PG_TX|BIT_PG_RX)) { u16 refill[MAX_TRAFFIC_CLASS], max[MAX_TRAFFIC_CLASS]; u8 bwg_id[MAX_TRAFFIC_CLASS], prio_type[MAX_TRAFFIC_CLASS]; @@ -442,8 +433,14 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) if (adapter->dcb_cfg.pfc_mode_enable) adapter->hw.fc.current_mode = ixgbe_fc_pfc; - if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) - clear_bit(__IXGBE_RESETTING, &adapter->state); +#ifdef IXGBE_FCOE + if (up && !(up & (1 << adapter->fcoe.up))) { + adapter->fcoe.up = ffs(up) - 1; + ixgbe_dcbnl_devreset(netdev); + ret = DCB_HW_CHG_RST; + } +#endif + adapter->dcb_set_bitmap = 0x00; return ret; } @@ -661,22 +658,6 @@ static int ixgbe_dcbnl_ieee_setpfc(struct net_device *dev, return ixgbe_dcb_hw_pfc_config(&adapter->hw, pfc->pfc_en, prio_tc); } -#ifdef IXGBE_FCOE -static void ixgbe_dcbnl_devreset(struct net_device *dev) -{ - struct ixgbe_adapter *adapter = netdev_priv(dev); - - if (netif_running(dev)) - dev->netdev_ops->ndo_stop(dev); - - ixgbe_clear_interrupt_scheme(adapter); - ixgbe_init_interrupt_scheme(adapter); - - if (netif_running(dev)) - dev->netdev_ops->ndo_open(dev); -} -#endif - static int ixgbe_dcbnl_ieee_setapp(struct net_device *dev, struct dcb_app *app) { -- GitLab