net: dsa: dump CPU port regs through master

Merge the CPU port registers dump into the master interface registers
dump through ethtool, by nesting the ethtool_drvinfo and ethtool_regs
structures of the CPU port into the dump.

drvinfo->regdump_len will contain the full data length, while regs->len
will contain only the master interface registers dump length.

This allows for example to dump the CPU port registers on a ZII Dev
C board like this:

    # ethtool -d eth1
    0x004:                                              0x00000000
    0x008:                                              0x0a8000aa
    0x010:                                              0x01000000
    0x014:                                              0x00000000
    0x024:                                              0xf0000102
    0x040:                                              0x6d82c800
    0x044:                                              0x00000020
    0x064:                                              0x40000000
    0x084: RCR (Receive Control Register)               0x47c00104
        MAX_FL (Maximum frame length)                   1984
        FCE (Flow control enable)                       0
        BC_REJ (Broadcast frame reject)                 0
        PROM (Promiscuous mode)                         0
        DRT (Disable receive on transmit)               0
        LOOP (Internal loopback)                        0
    0x0c4: TCR (Transmit Control Register)              0x00000004
        RFC_PAUSE (Receive frame control pause)         0
        TFC_PAUSE (Transmit frame control pause)        0
        FDEN (Full duplex enable)                       1
        HBC (Heartbeat control)                         0
        GTS (Graceful transmit stop)                    0
    0x0e4:                                              0x76735d6d
    0x0e8:                                              0x7e9e8808
    0x0ec:                                              0x00010000
    .
    .
    .
    88E6352  Switch Port Registers
    ------------------------------
    00: Port Status                            0x4d04
          Pause Enabled                        0
          My Pause                             1
          802.3 PHY Detected                   0
          Link Status                          Up
          Duplex                               Full
          Speed                                100 or 200 Mbps
          EEE Enabled                          0
          Transmitter Paused                   0
          Flow Control                         0
          Config Mode                          0x4
    01: Physical Control                       0x003d
          RGMII Receive Timing Control         Default
          RGMII Transmit Timing Control        Default
          200 BASE Mode                        100
          Flow Control's Forced value          0
          Force Flow Control                   0
          Link's Forced value                  Up
          Force Link                           1
          Duplex's Forced value                Full
          Force Duplex                         1
          Force Speed                          100 or 200 Mbps
    .
    .
    .
Signed-off-by: NVivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/dsa/master.c

@@ -8,6 +8,70 @@
 
 #include "dsa_priv.h"
 
+static int dsa_master_get_regs_len(struct net_device *dev)
+{
+	struct dsa_port *cpu_dp = dev->dsa_ptr;
+	const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
+	struct dsa_switch *ds = cpu_dp->ds;
+	int port = cpu_dp->index;
+	int ret = 0;
+	int len;
+
+	if (ops->get_regs_len) {
+		len = ops->get_regs_len(dev);
+		if (len < 0)
+			return len;
+		ret += len;
+	}
+
+	ret += sizeof(struct ethtool_drvinfo);
+	ret += sizeof(struct ethtool_regs);
+
+	if (ds->ops->get_regs_len) {
+		len = ds->ops->get_regs_len(ds, port);
+		if (len < 0)
+			return len;
+		ret += len;
+	}
+
+	return ret;
+}
+
+static void dsa_master_get_regs(struct net_device *dev,
+				struct ethtool_regs *regs, void *data)
+{
+	struct dsa_port *cpu_dp = dev->dsa_ptr;
+	const struct ethtool_ops *ops = cpu_dp->orig_ethtool_ops;
+	struct dsa_switch *ds = cpu_dp->ds;
+	struct ethtool_drvinfo *cpu_info;
+	struct ethtool_regs *cpu_regs;
+	int port = cpu_dp->index;
+	int len;
+
+	if (ops->get_regs_len && ops->get_regs) {
+		len = ops->get_regs_len(dev);
+		if (len < 0)
+			return;
+		regs->len = len;
+		ops->get_regs(dev, regs, data);
+		data += regs->len;
+	}
+
+	cpu_info = (struct ethtool_drvinfo *)data;
+	strlcpy(cpu_info->driver, "dsa", sizeof(cpu_info->driver));
+	data += sizeof(*cpu_info);
+	cpu_regs = (struct ethtool_regs *)data;
+	data += sizeof(*cpu_regs);
+
+	if (ds->ops->get_regs_len && ds->ops->get_regs) {
+		len = ds->ops->get_regs_len(ds, port);
+		if (len < 0)
+			return;
+		cpu_regs->len = len;
+		ds->ops->get_regs(ds, port, cpu_regs, data);
+	}
+}
+
 static void dsa_master_get_ethtool_stats(struct net_device *dev,
 					 struct ethtool_stats *stats,
 					 uint64_t *data)
@@ -147,6 +211,8 @@ static int dsa_master_ethtool_setup(struct net_device *dev)
 	if (cpu_dp->orig_ethtool_ops)
 		memcpy(ops, cpu_dp->orig_ethtool_ops, sizeof(*ops));
 
+	ops->get_regs_len = dsa_master_get_regs_len;
+	ops->get_regs = dsa_master_get_regs;
 	ops->get_sset_count = dsa_master_get_sset_count;
 	ops->get_ethtool_stats = dsa_master_get_ethtool_stats;
 	ops->get_strings = dsa_master_get_strings;