From 47a6bc61b86657646aea38e837a7f25c68cec7f8 Mon Sep 17 00:00:00 2001 From: Ander Conselvan de Oliveira Date: Thu, 6 Oct 2016 19:22:17 +0300 Subject: [PATCH] drm/i915: Move broxton phy code to intel_dpio_phy.c The phy in broxton is also a dpio phy, similar to cherryview but with programming through MMIO. So move the code together with the other similar phys. Signed-off-by: Ander Conselvan de Oliveira Reviewed-by: Imre Deak Link: http://patchwork.freedesktop.org/patch/msgid/d611de6d256593cf904172db7ff27f164480c228.1475770848.git-series.ander.conselvan.de.oliveira@intel.com --- drivers/gpu/drm/i915/i915_drv.h | 12 + drivers/gpu/drm/i915/intel_ddi.c | 322 +------------------------ drivers/gpu/drm/i915/intel_dpio_phy.c | 327 ++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_drv.h | 6 - 4 files changed, 341 insertions(+), 326 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index d3249e9c198c..c642f1097b8c 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -3761,6 +3761,18 @@ u32 vlv_flisdsi_read(struct drm_i915_private *dev_priv, u32 reg); void vlv_flisdsi_write(struct drm_i915_private *dev_priv, u32 reg, u32 val); /* intel_dpio_phy.c */ +void bxt_ddi_phy_init(struct drm_i915_private *dev_priv, enum dpio_phy phy); +void bxt_ddi_phy_uninit(struct drm_i915_private *dev_priv, enum dpio_phy phy); +bool bxt_ddi_phy_is_enabled(struct drm_i915_private *dev_priv, + enum dpio_phy phy); +bool bxt_ddi_phy_verify_state(struct drm_i915_private *dev_priv, + enum dpio_phy phy); +uint8_t bxt_ddi_phy_calc_lane_lat_optim_mask(struct intel_encoder *encoder, + uint8_t lane_count); +void bxt_ddi_phy_set_lane_optim_mask(struct intel_encoder *encoder, + uint8_t lane_lat_optim_mask); +uint8_t bxt_ddi_phy_get_lane_lat_optim_mask(struct intel_encoder *encoder); + void chv_set_phy_signal_level(struct intel_encoder *encoder, u32 deemph_reg_value, u32 margin_reg_value, bool uniq_trans_scale); diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 1de0276eecdd..51ca8eae2c8f 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1923,332 +1923,14 @@ static void intel_disable_ddi(struct intel_encoder *intel_encoder, } } -bool bxt_ddi_phy_is_enabled(struct drm_i915_private *dev_priv, - enum dpio_phy phy) -{ - enum port port; - - if (!(I915_READ(BXT_P_CR_GT_DISP_PWRON) & GT_DISPLAY_POWER_ON(phy))) - return false; - - if ((I915_READ(BXT_PORT_CL1CM_DW0(phy)) & - (PHY_POWER_GOOD | PHY_RESERVED)) != PHY_POWER_GOOD) { - DRM_DEBUG_DRIVER("DDI PHY %d powered, but power hasn't settled\n", - phy); - - return false; - } - - if (phy == DPIO_PHY1 && - !(I915_READ(BXT_PORT_REF_DW3(DPIO_PHY1)) & GRC_DONE)) { - DRM_DEBUG_DRIVER("DDI PHY 1 powered, but GRC isn't done\n"); - - return false; - } - - if (!(I915_READ(BXT_PHY_CTL_FAMILY(phy)) & COMMON_RESET_DIS)) { - DRM_DEBUG_DRIVER("DDI PHY %d powered, but still in reset\n", - phy); - - return false; - } - - for_each_port_masked(port, - phy == DPIO_PHY0 ? BIT(PORT_B) | BIT(PORT_C) : - BIT(PORT_A)) { - u32 tmp = I915_READ(BXT_PHY_CTL(port)); - - if (tmp & BXT_PHY_CMNLANE_POWERDOWN_ACK) { - DRM_DEBUG_DRIVER("DDI PHY %d powered, but common lane " - "for port %c powered down " - "(PHY_CTL %08x)\n", - phy, port_name(port), tmp); - - return false; - } - } - - return true; -} - -static u32 bxt_get_grc(struct drm_i915_private *dev_priv, enum dpio_phy phy) -{ - u32 val = I915_READ(BXT_PORT_REF_DW6(phy)); - - return (val & GRC_CODE_MASK) >> GRC_CODE_SHIFT; -} - -static void bxt_phy_wait_grc_done(struct drm_i915_private *dev_priv, - enum dpio_phy phy) -{ - if (intel_wait_for_register(dev_priv, - BXT_PORT_REF_DW3(phy), - GRC_DONE, GRC_DONE, - 10)) - DRM_ERROR("timeout waiting for PHY%d GRC\n", phy); -} - -void bxt_ddi_phy_init(struct drm_i915_private *dev_priv, enum dpio_phy phy) -{ - u32 val; - - if (bxt_ddi_phy_is_enabled(dev_priv, phy)) { - /* Still read out the GRC value for state verification */ - if (phy == DPIO_PHY0) - dev_priv->bxt_phy_grc = bxt_get_grc(dev_priv, phy); - - if (bxt_ddi_phy_verify_state(dev_priv, phy)) { - DRM_DEBUG_DRIVER("DDI PHY %d already enabled, " - "won't reprogram it\n", phy); - - return; - } - - DRM_DEBUG_DRIVER("DDI PHY %d enabled with invalid state, " - "force reprogramming it\n", phy); - } - - val = I915_READ(BXT_P_CR_GT_DISP_PWRON); - val |= GT_DISPLAY_POWER_ON(phy); - I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val); - - /* - * The PHY registers start out inaccessible and respond to reads with - * all 1s. Eventually they become accessible as they power up, then - * the reserved bit will give the default 0. Poll on the reserved bit - * becoming 0 to find when the PHY is accessible. - * HW team confirmed that the time to reach phypowergood status is - * anywhere between 50 us and 100us. - */ - if (wait_for_us(((I915_READ(BXT_PORT_CL1CM_DW0(phy)) & - (PHY_RESERVED | PHY_POWER_GOOD)) == PHY_POWER_GOOD), 100)) { - DRM_ERROR("timeout during PHY%d power on\n", phy); - } - - /* Program PLL Rcomp code offset */ - val = I915_READ(BXT_PORT_CL1CM_DW9(phy)); - val &= ~IREF0RC_OFFSET_MASK; - val |= 0xE4 << IREF0RC_OFFSET_SHIFT; - I915_WRITE(BXT_PORT_CL1CM_DW9(phy), val); - - val = I915_READ(BXT_PORT_CL1CM_DW10(phy)); - val &= ~IREF1RC_OFFSET_MASK; - val |= 0xE4 << IREF1RC_OFFSET_SHIFT; - I915_WRITE(BXT_PORT_CL1CM_DW10(phy), val); - - /* Program power gating */ - val = I915_READ(BXT_PORT_CL1CM_DW28(phy)); - val |= OCL1_POWER_DOWN_EN | DW28_OLDO_DYN_PWR_DOWN_EN | - SUS_CLK_CONFIG; - I915_WRITE(BXT_PORT_CL1CM_DW28(phy), val); - - if (phy == DPIO_PHY0) { - val = I915_READ(BXT_PORT_CL2CM_DW6_BC); - val |= DW6_OLDO_DYN_PWR_DOWN_EN; - I915_WRITE(BXT_PORT_CL2CM_DW6_BC, val); - } - - val = I915_READ(BXT_PORT_CL1CM_DW30(phy)); - val &= ~OCL2_LDOFUSE_PWR_DIS; - /* - * On PHY1 disable power on the second channel, since no port is - * connected there. On PHY0 both channels have a port, so leave it - * enabled. - * TODO: port C is only connected on BXT-P, so on BXT0/1 we should - * power down the second channel on PHY0 as well. - * - * FIXME: Clarify programming of the following, the register is - * read-only with bit 6 fixed at 0 at least in stepping A. - */ - if (phy == DPIO_PHY1) - val |= OCL2_LDOFUSE_PWR_DIS; - I915_WRITE(BXT_PORT_CL1CM_DW30(phy), val); - - if (phy == DPIO_PHY0) { - uint32_t grc_code; - /* - * PHY0 isn't connected to an RCOMP resistor so copy over - * the corresponding calibrated value from PHY1, and disable - * the automatic calibration on PHY0. - */ - val = dev_priv->bxt_phy_grc = bxt_get_grc(dev_priv, DPIO_PHY1); - grc_code = val << GRC_CODE_FAST_SHIFT | - val << GRC_CODE_SLOW_SHIFT | - val; - I915_WRITE(BXT_PORT_REF_DW6(DPIO_PHY0), grc_code); - - val = I915_READ(BXT_PORT_REF_DW8(DPIO_PHY0)); - val |= GRC_DIS | GRC_RDY_OVRD; - I915_WRITE(BXT_PORT_REF_DW8(DPIO_PHY0), val); - } - - val = I915_READ(BXT_PHY_CTL_FAMILY(phy)); - val |= COMMON_RESET_DIS; - I915_WRITE(BXT_PHY_CTL_FAMILY(phy), val); - - if (phy == DPIO_PHY1) - bxt_phy_wait_grc_done(dev_priv, DPIO_PHY1); -} - -void bxt_ddi_phy_uninit(struct drm_i915_private *dev_priv, enum dpio_phy phy) -{ - uint32_t val; - - val = I915_READ(BXT_PHY_CTL_FAMILY(phy)); - val &= ~COMMON_RESET_DIS; - I915_WRITE(BXT_PHY_CTL_FAMILY(phy), val); - - val = I915_READ(BXT_P_CR_GT_DISP_PWRON); - val &= ~GT_DISPLAY_POWER_ON(phy); - I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val); -} - -static bool __printf(6, 7) -__phy_reg_verify_state(struct drm_i915_private *dev_priv, enum dpio_phy phy, - i915_reg_t reg, u32 mask, u32 expected, - const char *reg_fmt, ...) -{ - struct va_format vaf; - va_list args; - u32 val; - - val = I915_READ(reg); - if ((val & mask) == expected) - return true; - - va_start(args, reg_fmt); - vaf.fmt = reg_fmt; - vaf.va = &args; - - DRM_DEBUG_DRIVER("DDI PHY %d reg %pV [%08x] state mismatch: " - "current %08x, expected %08x (mask %08x)\n", - phy, &vaf, reg.reg, val, (val & ~mask) | expected, - mask); - - va_end(args); - - return false; -} - -bool bxt_ddi_phy_verify_state(struct drm_i915_private *dev_priv, - enum dpio_phy phy) -{ - uint32_t mask; - bool ok; - -#define _CHK(reg, mask, exp, fmt, ...) \ - __phy_reg_verify_state(dev_priv, phy, reg, mask, exp, fmt, \ - ## __VA_ARGS__) - - if (!bxt_ddi_phy_is_enabled(dev_priv, phy)) - return false; - - ok = true; - - /* PLL Rcomp code offset */ - ok &= _CHK(BXT_PORT_CL1CM_DW9(phy), - IREF0RC_OFFSET_MASK, 0xe4 << IREF0RC_OFFSET_SHIFT, - "BXT_PORT_CL1CM_DW9(%d)", phy); - ok &= _CHK(BXT_PORT_CL1CM_DW10(phy), - IREF1RC_OFFSET_MASK, 0xe4 << IREF1RC_OFFSET_SHIFT, - "BXT_PORT_CL1CM_DW10(%d)", phy); - - /* Power gating */ - mask = OCL1_POWER_DOWN_EN | DW28_OLDO_DYN_PWR_DOWN_EN | SUS_CLK_CONFIG; - ok &= _CHK(BXT_PORT_CL1CM_DW28(phy), mask, mask, - "BXT_PORT_CL1CM_DW28(%d)", phy); - - if (phy == DPIO_PHY0) - ok &= _CHK(BXT_PORT_CL2CM_DW6_BC, - DW6_OLDO_DYN_PWR_DOWN_EN, DW6_OLDO_DYN_PWR_DOWN_EN, - "BXT_PORT_CL2CM_DW6_BC"); - - /* - * TODO: Verify BXT_PORT_CL1CM_DW30 bit OCL2_LDOFUSE_PWR_DIS, - * at least on stepping A this bit is read-only and fixed at 0. - */ - - if (phy == DPIO_PHY0) { - u32 grc_code = dev_priv->bxt_phy_grc; - - grc_code = grc_code << GRC_CODE_FAST_SHIFT | - grc_code << GRC_CODE_SLOW_SHIFT | - grc_code; - mask = GRC_CODE_FAST_MASK | GRC_CODE_SLOW_MASK | - GRC_CODE_NOM_MASK; - ok &= _CHK(BXT_PORT_REF_DW6(DPIO_PHY0), mask, grc_code, - "BXT_PORT_REF_DW6(%d)", DPIO_PHY0); - - mask = GRC_DIS | GRC_RDY_OVRD; - ok &= _CHK(BXT_PORT_REF_DW8(DPIO_PHY0), mask, mask, - "BXT_PORT_REF_DW8(%d)", DPIO_PHY0); - } - - return ok; -#undef _CHK -} - -static uint8_t -bxt_ddi_phy_calc_lane_lat_optim_mask(struct intel_encoder *encoder, - uint8_t lane_count) -{ - switch (lane_count) { - case 1: - return 0; - case 2: - return BIT(2) | BIT(0); - case 4: - return BIT(3) | BIT(2) | BIT(0); - default: - MISSING_CASE(lane_count); - - return 0; - } -} - static void bxt_ddi_pre_pll_enable(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config, struct drm_connector_state *conn_state) { - struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); - struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev); - enum port port = dport->port; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); - int lane; - - for (lane = 0; lane < 4; lane++) { - u32 val = I915_READ(BXT_PORT_TX_DW14_LN(port, lane)); - - /* - * Note that on CHV this flag is called UPAR, but has - * the same function. - */ - val &= ~LATENCY_OPTIM; - if (intel_crtc->config->lane_lat_optim_mask & BIT(lane)) - val |= LATENCY_OPTIM; - - I915_WRITE(BXT_PORT_TX_DW14_LN(port, lane), val); - } -} - -static uint8_t -bxt_ddi_phy_get_lane_lat_optim_mask(struct intel_encoder *encoder) -{ - struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); - struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev); - enum port port = dport->port; - int lane; - uint8_t mask; - - mask = 0; - for (lane = 0; lane < 4; lane++) { - u32 val = I915_READ(BXT_PORT_TX_DW14_LN(port, lane)); - - if (val & LATENCY_OPTIM) - mask |= BIT(lane); - } + uint8_t mask = intel_crtc->config->lane_lat_optim_mask; - return mask; + bxt_ddi_phy_set_lane_optim_mask(encoder, mask); } void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp) diff --git a/drivers/gpu/drm/i915/intel_dpio_phy.c b/drivers/gpu/drm/i915/intel_dpio_phy.c index 047f48748944..edf0cfd860c4 100644 --- a/drivers/gpu/drm/i915/intel_dpio_phy.c +++ b/drivers/gpu/drm/i915/intel_dpio_phy.c @@ -23,6 +23,333 @@ #include "intel_drv.h" +bool bxt_ddi_phy_is_enabled(struct drm_i915_private *dev_priv, + enum dpio_phy phy) +{ + enum port port; + + if (!(I915_READ(BXT_P_CR_GT_DISP_PWRON) & GT_DISPLAY_POWER_ON(phy))) + return false; + + if ((I915_READ(BXT_PORT_CL1CM_DW0(phy)) & + (PHY_POWER_GOOD | PHY_RESERVED)) != PHY_POWER_GOOD) { + DRM_DEBUG_DRIVER("DDI PHY %d powered, but power hasn't settled\n", + phy); + + return false; + } + + if (phy == DPIO_PHY1 && + !(I915_READ(BXT_PORT_REF_DW3(DPIO_PHY1)) & GRC_DONE)) { + DRM_DEBUG_DRIVER("DDI PHY 1 powered, but GRC isn't done\n"); + + return false; + } + + if (!(I915_READ(BXT_PHY_CTL_FAMILY(phy)) & COMMON_RESET_DIS)) { + DRM_DEBUG_DRIVER("DDI PHY %d powered, but still in reset\n", + phy); + + return false; + } + + for_each_port_masked(port, + phy == DPIO_PHY0 ? BIT(PORT_B) | BIT(PORT_C) : + BIT(PORT_A)) { + u32 tmp = I915_READ(BXT_PHY_CTL(port)); + + if (tmp & BXT_PHY_CMNLANE_POWERDOWN_ACK) { + DRM_DEBUG_DRIVER("DDI PHY %d powered, but common lane " + "for port %c powered down " + "(PHY_CTL %08x)\n", + phy, port_name(port), tmp); + + return false; + } + } + + return true; +} + +static u32 bxt_get_grc(struct drm_i915_private *dev_priv, enum dpio_phy phy) +{ + u32 val = I915_READ(BXT_PORT_REF_DW6(phy)); + + return (val & GRC_CODE_MASK) >> GRC_CODE_SHIFT; +} + +static void bxt_phy_wait_grc_done(struct drm_i915_private *dev_priv, + enum dpio_phy phy) +{ + if (intel_wait_for_register(dev_priv, + BXT_PORT_REF_DW3(phy), + GRC_DONE, GRC_DONE, + 10)) + DRM_ERROR("timeout waiting for PHY%d GRC\n", phy); +} + +void bxt_ddi_phy_init(struct drm_i915_private *dev_priv, enum dpio_phy phy) +{ + u32 val; + + if (bxt_ddi_phy_is_enabled(dev_priv, phy)) { + /* Still read out the GRC value for state verification */ + if (phy == DPIO_PHY0) + dev_priv->bxt_phy_grc = bxt_get_grc(dev_priv, phy); + + if (bxt_ddi_phy_verify_state(dev_priv, phy)) { + DRM_DEBUG_DRIVER("DDI PHY %d already enabled, " + "won't reprogram it\n", phy); + + return; + } + + DRM_DEBUG_DRIVER("DDI PHY %d enabled with invalid state, " + "force reprogramming it\n", phy); + } + + val = I915_READ(BXT_P_CR_GT_DISP_PWRON); + val |= GT_DISPLAY_POWER_ON(phy); + I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val); + + /* + * The PHY registers start out inaccessible and respond to reads with + * all 1s. Eventually they become accessible as they power up, then + * the reserved bit will give the default 0. Poll on the reserved bit + * becoming 0 to find when the PHY is accessible. + * HW team confirmed that the time to reach phypowergood status is + * anywhere between 50 us and 100us. + */ + if (wait_for_us(((I915_READ(BXT_PORT_CL1CM_DW0(phy)) & + (PHY_RESERVED | PHY_POWER_GOOD)) == PHY_POWER_GOOD), 100)) { + DRM_ERROR("timeout during PHY%d power on\n", phy); + } + + /* Program PLL Rcomp code offset */ + val = I915_READ(BXT_PORT_CL1CM_DW9(phy)); + val &= ~IREF0RC_OFFSET_MASK; + val |= 0xE4 << IREF0RC_OFFSET_SHIFT; + I915_WRITE(BXT_PORT_CL1CM_DW9(phy), val); + + val = I915_READ(BXT_PORT_CL1CM_DW10(phy)); + val &= ~IREF1RC_OFFSET_MASK; + val |= 0xE4 << IREF1RC_OFFSET_SHIFT; + I915_WRITE(BXT_PORT_CL1CM_DW10(phy), val); + + /* Program power gating */ + val = I915_READ(BXT_PORT_CL1CM_DW28(phy)); + val |= OCL1_POWER_DOWN_EN | DW28_OLDO_DYN_PWR_DOWN_EN | + SUS_CLK_CONFIG; + I915_WRITE(BXT_PORT_CL1CM_DW28(phy), val); + + if (phy == DPIO_PHY0) { + val = I915_READ(BXT_PORT_CL2CM_DW6_BC); + val |= DW6_OLDO_DYN_PWR_DOWN_EN; + I915_WRITE(BXT_PORT_CL2CM_DW6_BC, val); + } + + val = I915_READ(BXT_PORT_CL1CM_DW30(phy)); + val &= ~OCL2_LDOFUSE_PWR_DIS; + /* + * On PHY1 disable power on the second channel, since no port is + * connected there. On PHY0 both channels have a port, so leave it + * enabled. + * TODO: port C is only connected on BXT-P, so on BXT0/1 we should + * power down the second channel on PHY0 as well. + * + * FIXME: Clarify programming of the following, the register is + * read-only with bit 6 fixed at 0 at least in stepping A. + */ + if (phy == DPIO_PHY1) + val |= OCL2_LDOFUSE_PWR_DIS; + I915_WRITE(BXT_PORT_CL1CM_DW30(phy), val); + + if (phy == DPIO_PHY0) { + uint32_t grc_code; + /* + * PHY0 isn't connected to an RCOMP resistor so copy over + * the corresponding calibrated value from PHY1, and disable + * the automatic calibration on PHY0. + */ + val = dev_priv->bxt_phy_grc = bxt_get_grc(dev_priv, DPIO_PHY1); + grc_code = val << GRC_CODE_FAST_SHIFT | + val << GRC_CODE_SLOW_SHIFT | + val; + I915_WRITE(BXT_PORT_REF_DW6(DPIO_PHY0), grc_code); + + val = I915_READ(BXT_PORT_REF_DW8(DPIO_PHY0)); + val |= GRC_DIS | GRC_RDY_OVRD; + I915_WRITE(BXT_PORT_REF_DW8(DPIO_PHY0), val); + } + + val = I915_READ(BXT_PHY_CTL_FAMILY(phy)); + val |= COMMON_RESET_DIS; + I915_WRITE(BXT_PHY_CTL_FAMILY(phy), val); + + if (phy == DPIO_PHY1) + bxt_phy_wait_grc_done(dev_priv, DPIO_PHY1); +} + +void bxt_ddi_phy_uninit(struct drm_i915_private *dev_priv, enum dpio_phy phy) +{ + uint32_t val; + + val = I915_READ(BXT_PHY_CTL_FAMILY(phy)); + val &= ~COMMON_RESET_DIS; + I915_WRITE(BXT_PHY_CTL_FAMILY(phy), val); + + val = I915_READ(BXT_P_CR_GT_DISP_PWRON); + val &= ~GT_DISPLAY_POWER_ON(phy); + I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val); +} + +static bool __printf(6, 7) +__phy_reg_verify_state(struct drm_i915_private *dev_priv, enum dpio_phy phy, + i915_reg_t reg, u32 mask, u32 expected, + const char *reg_fmt, ...) +{ + struct va_format vaf; + va_list args; + u32 val; + + val = I915_READ(reg); + if ((val & mask) == expected) + return true; + + va_start(args, reg_fmt); + vaf.fmt = reg_fmt; + vaf.va = &args; + + DRM_DEBUG_DRIVER("DDI PHY %d reg %pV [%08x] state mismatch: " + "current %08x, expected %08x (mask %08x)\n", + phy, &vaf, reg.reg, val, (val & ~mask) | expected, + mask); + + va_end(args); + + return false; +} + +bool bxt_ddi_phy_verify_state(struct drm_i915_private *dev_priv, + enum dpio_phy phy) +{ + uint32_t mask; + bool ok; + +#define _CHK(reg, mask, exp, fmt, ...) \ + __phy_reg_verify_state(dev_priv, phy, reg, mask, exp, fmt, \ + ## __VA_ARGS__) + + if (!bxt_ddi_phy_is_enabled(dev_priv, phy)) + return false; + + ok = true; + + /* PLL Rcomp code offset */ + ok &= _CHK(BXT_PORT_CL1CM_DW9(phy), + IREF0RC_OFFSET_MASK, 0xe4 << IREF0RC_OFFSET_SHIFT, + "BXT_PORT_CL1CM_DW9(%d)", phy); + ok &= _CHK(BXT_PORT_CL1CM_DW10(phy), + IREF1RC_OFFSET_MASK, 0xe4 << IREF1RC_OFFSET_SHIFT, + "BXT_PORT_CL1CM_DW10(%d)", phy); + + /* Power gating */ + mask = OCL1_POWER_DOWN_EN | DW28_OLDO_DYN_PWR_DOWN_EN | SUS_CLK_CONFIG; + ok &= _CHK(BXT_PORT_CL1CM_DW28(phy), mask, mask, + "BXT_PORT_CL1CM_DW28(%d)", phy); + + if (phy == DPIO_PHY0) + ok &= _CHK(BXT_PORT_CL2CM_DW6_BC, + DW6_OLDO_DYN_PWR_DOWN_EN, DW6_OLDO_DYN_PWR_DOWN_EN, + "BXT_PORT_CL2CM_DW6_BC"); + + /* + * TODO: Verify BXT_PORT_CL1CM_DW30 bit OCL2_LDOFUSE_PWR_DIS, + * at least on stepping A this bit is read-only and fixed at 0. + */ + + if (phy == DPIO_PHY0) { + u32 grc_code = dev_priv->bxt_phy_grc; + + grc_code = grc_code << GRC_CODE_FAST_SHIFT | + grc_code << GRC_CODE_SLOW_SHIFT | + grc_code; + mask = GRC_CODE_FAST_MASK | GRC_CODE_SLOW_MASK | + GRC_CODE_NOM_MASK; + ok &= _CHK(BXT_PORT_REF_DW6(DPIO_PHY0), mask, grc_code, + "BXT_PORT_REF_DW6(%d)", DPIO_PHY0); + + mask = GRC_DIS | GRC_RDY_OVRD; + ok &= _CHK(BXT_PORT_REF_DW8(DPIO_PHY0), mask, mask, + "BXT_PORT_REF_DW8(%d)", DPIO_PHY0); + } + + return ok; +#undef _CHK +} + +uint8_t +bxt_ddi_phy_calc_lane_lat_optim_mask(struct intel_encoder *encoder, + uint8_t lane_count) +{ + switch (lane_count) { + case 1: + return 0; + case 2: + return BIT(2) | BIT(0); + case 4: + return BIT(3) | BIT(2) | BIT(0); + default: + MISSING_CASE(lane_count); + + return 0; + } +} + +void bxt_ddi_phy_set_lane_optim_mask(struct intel_encoder *encoder, + uint8_t lane_lat_optim_mask) +{ + struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); + struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev); + enum port port = dport->port; + int lane; + + for (lane = 0; lane < 4; lane++) { + u32 val = I915_READ(BXT_PORT_TX_DW14_LN(port, lane)); + + /* + * Note that on CHV this flag is called UPAR, but has + * the same function. + */ + val &= ~LATENCY_OPTIM; + if (lane_lat_optim_mask & BIT(lane)) + val |= LATENCY_OPTIM; + + I915_WRITE(BXT_PORT_TX_DW14_LN(port, lane), val); + } +} + +uint8_t +bxt_ddi_phy_get_lane_lat_optim_mask(struct intel_encoder *encoder) +{ + struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); + struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev); + enum port port = dport->port; + int lane; + uint8_t mask; + + mask = 0; + for (lane = 0; lane < 4; lane++) { + u32 val = I915_READ(BXT_PORT_TX_DW14_LN(port, lane)); + + if (val & LATENCY_OPTIM) + mask |= BIT(lane); + } + + return mask; +} + + void chv_set_phy_signal_level(struct intel_encoder *encoder, u32 deemph_reg_value, u32 margin_reg_value, bool uniq_trans_scale) diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index c2f38634e86e..29ab5260f100 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -1351,12 +1351,6 @@ void hsw_enable_pc8(struct drm_i915_private *dev_priv); void hsw_disable_pc8(struct drm_i915_private *dev_priv); void bxt_init_cdclk(struct drm_i915_private *dev_priv); void bxt_uninit_cdclk(struct drm_i915_private *dev_priv); -void bxt_ddi_phy_init(struct drm_i915_private *dev_priv, enum dpio_phy phy); -void bxt_ddi_phy_uninit(struct drm_i915_private *dev_priv, enum dpio_phy phy); -bool bxt_ddi_phy_is_enabled(struct drm_i915_private *dev_priv, - enum dpio_phy phy); -bool bxt_ddi_phy_verify_state(struct drm_i915_private *dev_priv, - enum dpio_phy phy); void gen9_sanitize_dc_state(struct drm_i915_private *dev_priv); void bxt_enable_dc9(struct drm_i915_private *dev_priv); void bxt_disable_dc9(struct drm_i915_private *dev_priv); -- GitLab